Solutions Center is working, now black screen in white. HP C6280 on WIndows 7.

Similar Questions

• "HP Solution Center cannot work because your device installation is not complete."

  I worked on it for about 8 hours now and I eventually give up. I can't have the hp Solution Center to work. Help, please.

  one is an hp photosmart d110a with wireless. operating system is windows 7 Home premium 64.

  I have already tried:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  10. run the download to reinstall the printer

  Help, please. It's very, very frustrating.

  Alasdair

  Hi alasdair,.

  Here's what we need to do at this point. We need to focus on a single computer, and then once we got this computer work we can work on the other. Follow the document of Fatal error 1603 to disable all your startup programs and then perform the steps in scrub on the XP computer. When you try to reinstall the printer, I want to connect to the USB printer until we try to connect it wirelessly.

  I would like to know what is happening?

  Fatal error ' error 1603

  Note: Do not use any software you have already downloaded. Download the full features software again from the link I provided below.

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  E-all-in-one printer, HP Photosmart - D110a - XP range:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80511-1&cc=us&DLC=en&LC=en&OS=228&product=4023246&sw_lang=

  HP Officejet 5610 - XP:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-35363-2&CC=US&DLC=en&LC=en&os=228&Product=441125&sw_lang=

  10. run the download to reinstall the printer

• "Solution Center cannot work because your device installation is not complete."

  I read the posts that deal with this problem before, but none of the solutions seem to work for me. When you try to open the solution Center I get the error message: "Solution Center cannot work because your installation of the device is not complete."  Argh, again! He used to work, but all of a sudden no longer. I uninstalled it, reinstalled, restarted print spooling, update adobe flash, has run windows updates, changed the "HP CUE Device Discovery" start-up, disabled virus protection, tried to connect by USB instead of wireless, etc... I also tried:

  1. download and install the following update

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77751-1&cc=us&DLC=en&LC=en&... =

  2. type % temp % in the field of race

  3. Locate and open the folder starting with 7z (example: 7zS2356)

  4 open the Util folder

  5 open the CCC folder

  ...

  ...

  .. but is there a "Util" folder in the folder starting with 7z...

  I don't have a disk, rather downloaded the software.

  It sucks, any other suggestions...?

  I have a computer Dell Vostro laptop running Windows 7 Professional 32 - bit and 64 - bit, connected wireless to a HP Photosmart C4599 all-in-one.

  Thanks in advance for any help!

  I finally got it! I have decided, once more, uninstall and reinstall. I eventually several files that began with 7z... I found one who had a "Util" folder it contains and a "CCC file" in this context, so I was able to continue with instructions of a related post, HP employee "pcwizard":

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-80348-1&cc=us&DLC=en&LC=en&...=

  10. run the download to reinstall the printer

  So I'm pumped it worked, but why is this problem even occurs?

• HP Jet 7: Black screen with white lines on the HP 7 stream

  I bought my HP 7 stream about 2 years ago and I'm now a black screen with white lines whenever I turn on the tablet.

  Can you kindly help.

  If that's what you see immediately when you turn on, the graphics have not to the Board of Directors.

  These tablets were dropped after the first year of release, and it would not be worth the cost if it could be repaired.

  I'm sorry.

• Cannot install the Bootmanager from vista DVD patch (black screen cursor white)

  Hello

  I started getting an error of e/s on my computer toshiba laptop l305d-s5928

  I went to my local computer store and got an installation disc, so I could repair the bootmanager.  (I watched the error message about this).

  I inserted the disk and booted from it.  It loads the files, displays the microsoft name and logo with the scroll bar, and then I get a black screen with white cursor. I can't understand what it is.  or what to do.

  Any ideas?

  EDIT: ntfsfix on Knoppix was not able to fix it.

  Hello

  Thanks for the post. Unfortunately, the question you have posted is not clear. Clarify these issues so that we can better understand the issue.

  a. Why have you tried to repair the Boot manager?

  b. What is the error that you have tried to solve the problems?

  c. the disc that you used is a disk drive or repair facility?

  d. were performing a clean installation or a repair (Custom) install?

  Provide more information so that we can better help you.

• I get a black screen when I play videos in Windows Media Player and Windows Media Center.

  Until recently, all worked well for a long time. Now when you try to watch live TV or a DVD, I get a black screen with sound in Windows Media Center and trying to watch a DVD in Windows Media Player I also get a black screen with sound. The controls are there and functioning normally. DVDs are normally visible in the K-Lite Media Player Classic.

  I have Windows 7 Ultimate 64-bit, a tuner TV of SiliconDust HD Homerun networked and a videocard ATI Radeon 4550. I have all the latest updates.

  I found and tried many recommendations of the Internet for problems like this, and none helped.

  The video card driver is the latest provided by ATI to Microsoft for Windows Update and is dated from 19/04/2011. I tried to install the latest Catalyst software and driver from the ATI site, which does nothing to help, and then uninstalled. These drivers provide no option to adjust the hardware acceleration.

  I had an older version of K-Lite codec package installed. The problem does not change if I have the old version, the last 32 + 64 bit version or no version installed.

  In Control Panel, I tried to disable Windows 7 media, reset their reactivation components and reboot again. There is nothing.

  I had an older version of installed package from Cyberlink. The problem remains the same if I have the old version, the version the most recent or any installed.

  I tried to uninstall all Apple software: QuickTime, iTunes, etc. There is nothing to help.

  I tried to create a new user account; same problem there.

  I have VMware and a virtual machine that is running 64-bit Windows 7 Professional. In this machine, I can view DVD normally with Windows Media Player, using the same physical DVD drive. I don't have Media Center set up in this machine.

  Title photo: original No. in Media Center and Media Player

  The problem is now resolved. I removed the software installed probably because the problem started, and Cisco Webex, which I did not need, was probably the culprit, although I'm not 100% sure.

  Thanks to those who have tried to help.

• HP 4500 GS10n-z: Solution Center not working not not for Win 7

  My Solution Center has just stopped working, I tried all the solutions I found here, including empty the temporary files, unistalling and current features and drivers, replacement hpqscloc complete software installation.  I noticed that a recent update of Microsoft 3132372 raises questions on 10 to win, but this update does not appear on my computer.  I wonder if different update for Windows 7 is the culprit, since when I run HP and Scan Doctor for Windows printing, the printer will scan, but displays an error to the Solution Center.  The weird part is that I don't even show Solution Center on my list of program isntalled EXCEPT when I try to run the full feature software and drivers, then it shows already installed sound.

  Any ideas?

  Rainbow7000,

  Finally got everything working. First using System Scan, then unistall4, then analysis system, unistall4, and twice as much for good luck restarting after each process.  Then using CC Cleaner, I uninstalled all HP programs remaining. Reset. Then an analysis of the system again. Restart the registry then using CC Cleaner cleaning.  Reset. Then I emptied the Temp folder.  An analysis over system. Reset.  Delete all files on the HP System. Reset

  Finally, printer Install Wizard and voila!  With the printer connected via USB, the rest of the installation of f smooth including wireless setup.  We didn't know re restart and Solution HP now works!

  I have the old Flashplayer10X on my system, but I don't care!  I never use IE anyway, so having this obsolete version on my computer shouldn't matter. I'm so happy to have Sokutin Center works again

  Thanks for your help!

• HP Solution Center not working after reboot (scan fails also)

  My HP Photosmart 3310 software fails after a reboot, the day or the installation of the printer in Windows 7 64 bit.  No error - it is said that installation is not completed and to connect the USB cable (it worked only 1 hour ago), or the printer is offline.  I can reach the printer via IP (192.168.1.64 - static IP).  The other computers in the House are printing and scanning very well.

  Help I received via the software discussion and support forums is to re - install the software.  I did it more than 20 times - it does NOT work. Let me repeat if you have not received this the first time - software does NOT solve the problem.

  The scanner and the printer work fine after that the software is completely installed.  The problem is that the printer and the scanner work not the next day.

  Yes, I tried:

  1. check the latest system and windows updates.

  2. turned and on the firewall.

  3. pull on the printer and connect via a USB cable.  "" The installation is complete, but I can't run this way. The problem comes back the next day when I tried using the printer as a network through the router.

  4 when I "add" the printer to Windows printers list, it causes the software HP Solution Center to enter the "incomplete installation error.  Then, either the scanner or printer works, not both at the same time.  Other computers work fine.

  5. it's a brand new computer, if any old malware running.

  6. I uninstalled, reinstalled, installed multiple copies, etc. of the latest version of the software from this site (AIO_CDB_FSW_Full_Win_WW_130_141) printer.

  7. I ran the software patch network of HP, before and after the reboot, no real effect.  (CPE_SLP_NETWORKMSI_hpcom_000_006)

  Any help would be greatly appreciated.

  Rich

  I found a solution to the issue of scanner!  I installed the software VueScan from http://www.hamrick.com/ , the software is designed for high end photo editing, so it's a no-brainer for her to scan documents.  The free version works fine. If I wanted to the cost of the professional version of the $90 is nothing compared to the time I've wasted on getting the HP software to work.

  To resolve the problem of the printer, I installed the driver through windows and bypassed the HP software.  The only thing that miss me is now the ability to fax, but which can be performed directly from the HP Photosmart camera.

• After installed Windows 8 on my Dell Ispiron 660 PC, doing an update and download now black screen?

  Install Windows 8 on my Dell Ispiron 660 PC, Worked fine. After update of several programs, she has restarted. Now, I have a black screen and cannot fix.

  Install Windows 8 on my Dell Ispiron 660 PC, Worked fine. After update of several programs, she has restarted. Now, I have a black screen and cannot fix.

  To all those who responded. By chance, I removed a faulty graphics card and it has started up.

  Thank you all...

• No HP devices have been detected. HP Solution Center will close now. HP 5610xi all-in-One

  I followed all the instructions without result.  I uninstalled the printer using Uninstall_L3.bat, reinstalled the printer using the download from the HP Web site.  The installation ends.  It goes through all the movements to the end where is is located at 96% for the longest and fairer farm.  Never, he finished the installation and so no HP devices.  I can scan using paint I can print documents.  The solution center is the only part not working do not and I need to be able to use the auto feed for scanning.  I can't scan using the buttons on the printer.

  What can I do now?  I am running Vista Home Preimiun, Service Pack 2 on an HP Pavilion Notebook dv9417cl.  It's frustrating.

  Well, there are ghosts or gremlins in the printer or the pc, or both.  I had worked on my PC earlier, put on standby for a coffee and when I woke up, it appeared a message for the installation of HP.  I clicked on continue and it has finished installing and everything works.  I am at a total loss about why, but I'm glad it works.  Thank you, Kyle.  Cherry

• SOLUTION: Get Win 7 printer drivers/HP Solution Center for work on Windows 8

  Took me some time to understand it, but I managed to do the work.

  First of all, the preliminaries:

  I have a laptop HP dv9700t running the 64-bit version of Windows 8 Pro RTM (not the preview, but I guess it will work as well on the preview).  My printer is a HP Photosmart C7280.  If you have a different printer, it is possible that something similar to how I solved my problem will help you, especially by running your installation in Windows 7 Compatibility Mode files.

  Windows 8 is provided with printer C7280 stock drivers that work by going to control panel > printers and devices > add a printer, but there is only limited to those features.  As such, I wanted to run the HP Setup files have increased functionality.

  Unfortunately, when I run the full installer of HP for my printer, there was no button 'Install a printer', or one of the other usual buttons.  There was only one button "quit".

  Here's how to let him run and install correctly.

  Right click on the HP full installation file, then properties > compatibility > then check the box "run this program in compatibility mode for:", select "Windows 7" in the drop-down list box, then click on 'OK'.

  Run the installation file as you would normally in Windows 7.

  I tried this two ways... first when you're connected via a USB cable.  It works perfectly without error.

  I also tried with the printer connected to the network via WiFi.  A few problems.

  The installation program detects my printer very well, and I clicked 'Next' or 'OK' or whatever the prompt was to install the printer.  The installation would hang 'Response of SNMP' (or something similar) and it would list the IP address of my printer.  I waited, waited, waited for an hour, and it would not go beyond that.  Not to worry.

  Proceed with the normal installation until you get the message 'Response of SNMP' and the installation fails.

  Enter with CTRL-ALT-DEL Task Manager.  You will see an entry in the 'Apps' to the installer of HP... DROP.

  Below the "Apps" list, you will see the list of "background processes".  In this list is something along the lines of "HP Network Interface user", or something similar, consuming a significant amount of CPU.  Highlight this entry and click "End task" downstairs.

  The "SNMP" window closes and your installer will end then normally and your printer/fax/scanner will be installed correctly.  HP Solution Center works normally, like printing, scanning, etc.

  The next person who uses that will give a few comments and also answer a few questions for me so I can update this post with more specific information?

  Please let me know what is the exact "SNMP" message when the installation is blocked.  Please let me also know that the exact name of the background process "HP Network User Interface" is, and the name of app Installation HP.

  I hope this will help you.

  Glad to hear that a form any of my solution works for others.

• HP c6380: HP Solution Center stopped working

  HP Solution Center has stopped working. I am able to print, but the function in an analysis center solution no longer works.

  I use Windows 7. I can scan if I plug in the USB cable, but not using a wireless connection. Works only for printing. I used HP Scan and printing doctor, but that has not solved the problem.

  I've seen a number of positions with various suggestions (install Macromedia Flash Player, reinstall the driver, etc.) that did not work. I would like to hear how others have solved this problem or, better yet, how HP addressed.

  

  Thanks for getting back to me anderswolf! Maybe a level 3 uninstall and reinstall, will help launch the software in speed to operate again on your computer.

  Perform a level 3 uninstall if you have an HP computer or a level 4 uninstall if you have a computer not HP.
  There are 2 ways you can run levels:
   
  Of the Original installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open "Computer", and then right click on CD drive and open
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7. run the download to reinstall the printer: HP Photosmart full feature software and drivers
   
  If the software has been downloaded and extracted to your system:
  1. Click Start and type %temp% in the search field and press ENTER to open the Temp folder
  2. Locate and open the folder starting with 7z (example: 7zS2356) (if there is more than one, choose the most recent folder)
  3 open the Util folder
  4 open the CCC folder
  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
  6. once the uninstall is complete, restart the computer
  7. run the download to reinstall the printer
   
   
  I hope that helps you out!

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Let me know what happens please

• Can't get my HP Solution Center to work properly.

  Load the new L7780 HP Officejet Pro all-in-One software properly on my laptop and I scan from the center of HP solutions on laptop very well.

  I loaded the same software on my desktop and can print wireless, but when I open the HP Solution Center I get and error "unexpected internal error has occurred."  Have rebooted and installed with no improvement.  My OS is widows Vista.

  The error message says this?

  An unexpected internal error has occurred. Click OK to close the program, and then try the following:
  -Restart the program.
  -Restart the PC and then try again.
  -Reinstall the software photos & images and try again.

  After having tried many suggestions, I found that this fix did the trick.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-65961-4&LC=en&DLC=en&CC=US&OS=2093&Product=2512010&sw_lang=

  The patch is older than the latest software available for my all-in-one, which is a different model. But although he is older, the patch has fixed the problem, and I can now scan the events of the HP Solution Center.

  Hope that helps.

  Otherwise, click here to download the HP scan Diagnostic Utility, and read this: http://h30434.www3.hp.com/t5/Scanning-faxing-and-copying/Having-Trouble-connecting-to-your-All-in-One-Scanner-Try-the-HP/td-p/255591

  Good luck!

• OfficeJet J6480 how to stop the HP Solutions Center opens automatically on the screen?

  Printer Officejet J6480, Vista, connected to the laptop cable AND Wireless may be also (not sure wireless).

  Always after that laptop starts upward and often while on Internet - the HP Solutions Center program opens automatically.  It passes through the small boxes asking to install with CD, etc opening.  I stop them and then Solutions Center opens in any case.  This happens in all work on laptop.   And especially, even if you use the printer manually.

  How to disable?

  I realize it may have something to do with the configuration and use of the cable linking the two...

  (My setup is very sensitive and was having too much difficulty with the fax configuration.  Always of the problems there, too.)

  Any ideas?

  Much appreciated!

  Hi HP-CompaqPC,

  I understand that you have a J6480 Officejet which continues to run through the installation of the solution Center whenever your computer starts up. I'm sorry to hear that, but will definitely do my best to help you.

  I would recommend that you download and run the HP print and Scan Doctor and he should be able to identify what the problem is and make some suggestions on how to fix it.

  I would like to know how this happens, have a great day!

• No HP devices have been detected. Solution Center will close now

  After you have reinstalled the software C3140 on my PC, I get the error of the message object. I am running Vista Home Basic on Dell E520.

  I uninstalled two three times. Completely cleaned all HP form the PC and reinstalled. Everything seems to load as Solution Center. When I try to open the centre Soluution I get subject error message.

  Grunt

  Hi PK,.

  Thank you for the update. We are always here to help the customer. Have a wonderful day.