Solutions of workaround for missing Officejet 6500 a (E710a-f) features?

Similar Questions

• OfficeJet 6500 E710a-f: how to download the latest firmware and the BASE driver for my Officejet 6500 on Windows 7

  I'm looking for a way to download the latest driver and firmware base packages for my Officejet 6500 E710a-f for Windows 7, x 64 (latest patches and service packs applied).

  Regardless of the road I take (including the link called "Download drivers"), finding drivers inevitably leads me to the same page that contains the vertical tabs named 'Troubleshooting', 'How to' and so on and none of the links - not even under 'options to support more' - led to a Basic downloadable driver package. In fact, none of them leads to a downloadable driver package of all kinds. The most that I could find is that package Wizard driver installation that attempts to download the package that I am not interested in-oh and a few mentions in the KB articles downloadable driver packages.

  I also tried "Printer Setup, Installation" & Setup and then variously "Installation, install & connect printer ' and 'Software updates' & Firmware, which none offer a downloadable package.

  This used to work perfectly fine a few months ago, but now I'm getting round on the same page over and over again. I can not find the basic driver or the software for the printer more.

  Where can I find the basic driver package (used about 30 MB in size) in order to avoid the crapware included in the package (130MO) "full feature" more great who gets automatically downloaded to an unknown destination on my hard drive using this driver installation wizard. It's my PC and I want to be the one who decides in which runs when and how. Now I can try to track down the location of download using ProcMon and what not, but it would give me is this package 'feature complete' with a bunch of crapware added on strictly necessary. How to get the base driver package?

  Thank you!

  Never mind. Fascinating, the "Download drivers" link under the Support tab at the top leads to a different page that the link "search for drivers' next to my question posted .

  Both methods require enter the name of the model (after picking "Printers" in the first case) in a similar way, but the former led in circles on the same page with no possibility to download, while the latter one immediately takes me to the downloads, I was looking for.

• How to set default COPY for HP Officejet 6500 has more quality DRAFT?

  How can I set default COPY quality to the PROJECT for HP Officejet 6500 has more?

  Hello

  Press on copy on the front panel of the printer, then press the settings button.

  Quality faucet and quick selection / project.

  Press on set as the new default settings, and then click Yes to confirm the changes.

  Later draft quality will be used for the copy unless any other quality is selected.

  Kind regards

  Shlomi

• For an Officejet 6500 E709n is the required HP Hpzlnt04.dll file?

  For an Officejet 6500 E709n is the required HP Hpzlnt04.dll file?  I was scanning plugins and Printer Monitor specified designation unknown. Then I searched on Google and said results it might be a virus named Hpzlnt04? It is necessary or can I remove it?

  Hi there swishl,

  The file is a library of links necessary for HP printers. If you are worried about the validity of the file from this link. They give a good description of the file and its attributes of text is faith. Hope this helps.

  Good luck!

• Support for HP Officejet 6500 is stuck to the right

  My HP Officejet 6500 cartridge cradle is stuck to the right and won't spend. It also reports a paper jam, although there is no jam. I use Windows 7.

  I tried the tips in the videos of support, but it does not help.

  Please notify.

  Hello Kristen,

  Sorry for the late response - I see your message until now.

  I hope that you have already found a solution now, but in case you haven't:

  As I remember, I just searched the Web for HP authorized service providers.

  In my country (Israel), there were only 2, so it was not difficult to choose :-) and then I just called them.

  Moreover, in my case the repair cost about half the price of a new printer, a newer model, which comes with ink cartridges and arrives at your House. Because I needed the printer of emergency for commercial purposes, I chose to fix the damaged, but if I didn't need it right now, I would probably chose to order a new, rather to bother with going to the service provider with the printer, and then goes again to pick up the printer fixed.

  Hope that helps.

  Roy

• Apple Airprint for HP Officejet 6500 has more via a wired connection to the router

  Hello

  So I did a considerable amount of research in this through the internet and this forum and I still struggle to find a satisfactory solution.

  I have a HP Officejet 6500 a more connected by ethernet to my BT Homehub 3.

  It is I understand that even if there is a wired connection, as long as my iOS device (iPad 2 or iPhone 5) is connected to the same router, I should still be able to see this Officejet thanks to ease of airprint.

  Unfortunately, this is not the case. I get the message "No Airprint Printers Found" on both devices. The only way I managed to get my Mac Pro (Mavericks) to connect has been add to mannualy by using the IP address of the printer.

  Can anyone provide guidance on what I might hurt? Certainly, the printer must connect internet I can print from my iOS devices using HP ePrint app for iOS.

  Some might say, well, what's the problem, just use the HP application, but is not the point. I think that if something has been set up to make things easier, then use it. I chose this printer specifically for this feature is a bit frustrating for her so difficult to get the desired results.

  Hope it is something simple and anyone can help you.

  Thank you

  Steve

  Following this request and reading the many more similar questions, I think I may have solved this.

  I'm not 100% sure but I read a few threads suggests that there are issues around BT Homehub 3 and Hello so this can be a problem.

  I tried the following in the past two days...

  (1) completely don't reset my router (wiped all settings and started)-no luck!

  (2) I tried changing to WPA2 to just WPA security - no luck!

  (3) tried to convey the Hello to the printer ports - no luck!

  (4) turn off the router, printer and all the devices iOS then fed back router, printer, then iOS devices - printer appears on iOS devices, but when printing was selected iOS device returned on several occasions not connected printer error.

  Finally, what seems to have made (at least for now) has been...

  (1) disconnected the Officejet ethernet and set up as wireless.

  (2) off voltage router, printer and all iOS devices then propelled upward in the order listed previously.

  (3) so far, I tried to print a mail and a web page of my iOS devices, and both have been successful.

  By the way I've been struggling also to airplay from my iPhone / iPad until I started messing around with the settings above, and now this question also seems to be resolved.

  Due to the variety of combinations (different printers, routers, etc.) people will have, it seems to be quite difficult to find a solution that solves a single problem but I hope some of my experiences and findings could help others in some way.

• Wireless for HP OfficeJet 6500 a configuration more all-in-One on Ubuntu 10.04

  I bought a HP OfficeJet 6500 has more all-in-One CN557A, I want to use with ubuntu 10.04 64 bits as a wireless network printer.
  Before, I bought, I checked the compatibility on www.hplipopensource.org and www.openprinting.org, and everything was in order.
  The machine is detected automatically and fully functional when connected with a usb cable, but I failed to operate as a wireless printer.
  That's what I did:

  I configured the printer on the network (through the interface of the printer), and it connects. It prints a 'Wireless Network Test report', and everything works. I can ping the local ip address and access it via the browser. HP eprint also works.

  I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognize the device.

  I ran 'hp-check', who gave without errors or warnings:

  tjoff@MEK-403-jakbo-01: ~ $ hp-check

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Dependency/Version Check Utility worm. 14.3

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Note: hp-check can be run in three modes:
  1. check mode (-c or - compilation) compilation: use this mode before compiling the
  HPLIP provided source tarball (. tar.gz or .run) to determine if the appropriate dependencies
  are installed to compile correctly HPLIP.
  2. performance check (r or - run) mode: use this mode to determine if a distribution
  provided package (.deb, .rpm, etc.) or a supplied HPLIP tarball already built
  the appropriate dependencies installed to run successfully.
  3. the two and run-compilation mode check (b or - both) (by default): this mode
  check the two cases above (the two dependencies of compilation and execution).

  Save the output in the log file: hp - check.log

  During initialization. Please wait...

  ---------------
  | SYSTEM INFO |
  ---------------

  Base information system:
  78 - Ubuntu Linux 2.6.32 mek-403-jakbo-01-35-generic # SMP kills Sep 11 16:11:24 UTC 2011 x86_64 GNU/Linux

  Distribution:
  Ubuntu 10.04

  Checking version of Python...
  OK, installed the version 2.6.5

  Checking for version 4.x PyQt...
  OK, version 4.7.2 installed.

  Checking the CUPS...
  Status: Scheduler is running
  Version: 1.4.3
  error_log is defined at the level: warning

  Checking the dbus/python-dbus...
  dbus daemon is running.
  Python-dbus version: 0.83.0

  ------------------------------------
  | COMPILATION AND RUNTIME DEPENDENCIES.
  ------------------------------------

  Note: to check the dependencies only compilation, run hp - check with the parameter - c (IE, hp-check - c).
  Note: to check the dependencies only run time, run hp - check with the parameter-r (IE, hp-check - r).

  Dependency checking: CUPS - Common Unix Printing System...
  OK, found.

  Dependency checking: CUPS devel - development Common Unix Printing System files...
  OK, found.

  Dependency checking: CUPS image - development for the CUPS image files...
  OK, found.

  Dependency checking: DBus - Message bus system...
  OK, found.

  Dependency checking: gcc - the GNU Project C and C++ compiler...
  OK, found.

  Dependency checking: GhostScript - PostScript and PDF interpreter and preview generator...
  OK, found.

  Dependency checking: libcrypto - OpenSSL cryptographic library...
  OK, found.

  Dependency checking: libjpeg - JPEG library...
  OK, found.

  Dependency checking: libnetsnmp-devel - SNMP networking of development libraries files...
  OK, found.

  Dependency checking: libpthread - POSIX threads library...
  OK, found.

  Dependency checking: libtool - building of the library support services...
  OK, found.

  Dependency checking: libusb - Library USB...
  OK, found.

  Dependency checking: make - GNU make utility to maintain groups of programs...
  OK, found.

  Dependency checking: PIL - Python Imaging Library (mandatory for the commandline scanner with hp-scan)...
  OK, found.

  Dependency checking: PolicyKit - administrative framework...
  OK, found.

  Dependency checking: PyQt 4 DBus - Support of DBus for PyQt4.
  OK, found.

  Verification of dependency: Python-DBus - Python bindings for DBus...
  OK, found.

  Verification of dependency: Python-devel - development Python files...
  OK, found.

  Verification of dependency: Python libnotify - Python bindings for libnotify desktop notifications...
  OK, found.

  Verification of dependency: Python XML libraries...
  OK, found.

  Verification of dependency: Python 2.3 or above - for the fax function...
  OK, found.

  Verification of dependency: Python 2.2 or higher - Python programming language...
  OK, found.

  Dependency checking: Reportlab - library for Python PDF...
  OK, found.

  Dependency checking: SANE - library digitization...
  OK, found.

  Dependency checking: SANE - sweep of development libraries files...
  OK, found.

  Dependency checking: scanimage - Shell program scanning...
  OK, found.

  Dependency checking: xsane - scanner Graphical frontend for SANE...
  OK, found.

  ----------------------
  | HPLIP INSTALLATION |
  ----------------------

  HPLIP currently installed version...
  HPLIP 3.11.10 currently installed in ' / usr/share/hplip.

  Current content of ' / etc/hp/hplip.conf' file:
  # hplip.conf. From the hplip.conf.in to configure.

  [hplip]
  version = 3.11.10

  [directories]
  Home = / usr/share/hplip
  Run = / var /.
  PPD = / usr/share/ppd/HP
  ppdbase = / usr/share/ppd
  doc=/usr/share/doc/hplip-3.11.10
  icon = / usr/share/applications
  cupsbackend = / usr/lib/CUPS/backend
  cupsfilter = / usr/lib/cups/filter
  DRV = / usr/share/cups/drv/hp

  # Following values are determined to set the time and cannot be changed.
  [configure]
  network-build = yes
  pp-build = no
  GUI-build = yes
  Scanner-build = yes
  Fax-build = yes
  dbus-build = yes
  cups11-construction = no
  doc-build = yes
  shadow-build = no
  HPIJS-install = no
  Foomatic-drv-install = no
  Foomatic-ppd-install = no
  Foomatic-rip-hplip-install = no
  hpcups-install = yes
  cups-drv-install = yes
  cups-ppd-install = no
  internal-tag = 3.11.10
  limited build = no
  UI-toolkit = qt4
  Qt3 = No.
  Qt4 = yes
  policy-kit = no
  HPIJS-only-build = no
  Lite-build = no
  udev-acl-rules = yes
  hpcups-only-build = no
  HPIJS-only-build = no

  Current content of ' / var/lib/hp/hplip.state' file:
  # hplip.state - runtime HPLIP persistent variables.

  [plugin]
  installed = 0
  EULA = 0

  Current content of ' ~ /.hplip/hplip.conf' file:
  [last_used]
  printer_name =
  working_dir =.
  device_uri = "hp: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW.

  [orders]
  Scan = / usr/bin/xsane v % SANE_URI %

  [installation]
  version = 3.11.10
  Date_Time = 2011-11-16 14:30:35

  [Settings]
  systray_messages = 0
  systray_visible = 0

  [fax]
  Email_Address =
  voice_phone =

  [update]
  rate = 30
  enable = false
  Type = 1

  [survey]
  enable = false
  device_list =
  interval = 5

  --------------------------
  | DISCOVERY USB DEVICES |
  --------------------------

  Device URI scheme
  -------------------------------- -------------------------
  HP: / usb/Officejet_6500_E710n-z? s HP Officejet 6500 E710n-z
  Erial = CN16F2402Q05JW

  ---------------------------------
  | THE INSTALLED CUPS PRINT QUEUES.
  ---------------------------------

  B-403-271-A4-COLOR2
  -------------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color

  B403-271-A4-BW
  --------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW

  HP-Officejet-6500-E710n-z-FAX
  -----------------------------
  Type: printer
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
  Description of PPD: HP Officejet 6500 e710n-z, hpcups 3.11.10
  Status of the printer: printer HP-Officejet-6500-E710n-z-FAX is inactive. activated in 2011-11-16 T 01: 00:45 THIS
  Communication situation: good

  ----------------------
  | SANE CONFIGURATION |
  ----------------------

  'hpaio' in ' / etc/sane.d/dll.conf'...
  OK, found. SANE backend "hpaio" is properly set up.

  Check the output of ' scanimage-L '...
  device ' hpaio: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW' is an all-in-one HP Officejet_6500_E710n-z

  ---------------------
  | THE PYTHON EXTENSIONS.
  ---------------------

  Checking the 'cupsext' extension of CUPS...
  OK, found.

  The 'pcardext' Photocard extension checking...
  OK, found.

  Checking extension 'hpmudext' I/O...
  OK, found.

  Checking the 'scanext' extension of healthy MIND scan...
  OK, found.

  -----------------
  | CONFIGURATION OF E/S USB |
  -----------------

  Checking the permissions of attached USB printers...

  For this device HP 0 x 5412 002:005:
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  Device node: / dev/bus/usb/002/005
  Mode: 0664

  ---------------
  | USER GROUPS |
  ---------------

  LP ADM dialout cdrom plugdev lpadmin admin sambashare vboxusers

  -----------
  | SUMMARY |
  -----------

  Without errors or warnings.

  Fact.

  I then ran "sudo hp-setup", chose the device (which has been detected), has chosen my wireless network, enter the wireless security key. On the results of configuration window, I get two messages:
  "Your printer has been correctly configured on the wireless network. You can now unplug the USB cable.
  and
  "The Ethernet cable is plugged to prevent you to connect to a wireless network. For a wireless connection, remove the cable and try again. (VSA000) »
  There is no ethernet cable connected, so I can't remove it. I unplug the USB cable and click on "Finish". What makes the "hp-setup" - beginning of dialogue even more and the printer has not been installed.
  In the terminal, I have the following:

  tjoff@MEK-403-jakbo-01: ~ $ sudo hp-setup
  [sudo] password for tjoff:

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Printer/Fax Setup Utility version 9.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Research on USB bus...
  GET/HTTP/1.1 IoMgmt/Adapters
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  error: missing answer key: ' iorotocols-iorotocol - dd:dnsserveripaddress - 0'
  GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks/SSID = mVnmXfsu HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET /IoMgmt/IoConfig.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  I then tried to reconnect the printer usb cable and run "hp-toolbox" and click on "Configuration without wireless/wifi via a USB port. Now, I get the error:

  tjoff@MEK-403-jakbo-01: ~ $ hp-toolbox

  HP Linux Imaging and Printing System (ver. 3.11.10)
  HP worm Device Manager. 15.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  HP Linux Imaging and Printing System (ver. 3.11.10)
  WiFi Configuration Utility version 1.1

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  error: error writing channel
  error: an i/o error has occurred. Please check the USB connection to your printer and try again. (I/O device error)

  Fact.

  I do not understand how after this point, and any help is welcome.

  A friendly soul on ubuntuforums pointed out, that the wireless configuration is necessary only if the printer is NOT connected to a local area network (W). So everything what I should really do is to configure the printer on the page Administration of CUPS, and it worked. Problem solved. Ridicule me.

• HOW TO OBTAIN THE DEVICE DRIVER FOR "HP OFFICEJET 6500 E709 SERIES PRINTER?

  MY COMPUTER WOULD LIKE TO ADVISE THAT MY PRINTER DOESN'T HAVE THE INSTALLED DEVICE DRIVER?   PHYLLIS MASON

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Try printing HP and Scan Doctor for Windows
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  Good luck, you need to update or reinstall the latest driver.

  HP OfficeJet 6500 E709 - drivers<-- select="" model="" and="" then="" you="">
  Windows
  http://WWW8.HP.com/us/en/support-search.HTML?tab=1#/qryterm=OfficeJet%206500%20E709&search_searchtype=s-002

  HP 6500 E709 - Support & Troubleshooting
  http://WWW8.HP.com/us/en/support-search.HTML?tab=2#/qryterm=OfficeJet%206500%20E709&search_searchtype=s-001

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How do to transfer article Microsoft Word for HP Officejet 6500 has more to print

  Could not find a way to print an article in Microsoft Word using my HPOfficejet 6500 has more. How can I transfer the article to print it directly from Word Microspft?

  What operating system? What version of Word?

  Generally, you need to select file, print, and then make sure the Officejet 6500 a is selected (not the fax device), select the appropriate properties and then select print.

• OfficeJet 6500 A +: how to write bitmap for HP Officejet 6500 a

  On a previous HP laserjet, I used to be able to open up the printer as a file LPT1 and write a bitmap of the screen using MS Basic (Quick Basic) professional development system.  I do something similar on the Officejet 6500 of?

  The OfficeJet 6500 A printer models include only the PCL3GUI Language of Description of Page, so your Basic program must convert your bitmap image into the equivalent object in this language.

  But (as far as I know) HP do not publish this PDLspecifications, so it would be very difficult without the use of a supplied driver.

  There may be features that your basic program can call which would be "hook" in the driver, as well as common applications (Word, Paint, etc.)?

• I have problems to install the software for my Officejet 6500 has more on my Win XP machine.

  
  
  Follow instructions for 'clear' all the stuff of temp and started around. Much to my surprise I had the same problems all over again. I can't understand this update of the player from Nvidia. But your suggestions led to a workaround. Once I was allowed to leave the area temporary and tried to re install I went back after my problem continued to search for anything I might have missed. I was able to locate the new Temp directory that had just been created via the HP software. I have this opening was able to directly run the installation from this directory and he did not get given wrong directions to the Nvidia. Installation was successful

• Can not reinstall the software/driver for the Officejet 6500 all-in-one

  I tried to 'day' the pilot on my all-in-one e710n-z printer 6500, and now I have no printer to work at all.  Installation stops at about 80% complete giving the error: Network Installation fails.  I followed all the procedures including online uninstall them, winsock reset, reinstall, install HP utility failure, disabled anti-anti-virus/firewall... nothing works.   My printer is detected by the computer and he "wants" install, but nothing works!  Wi - fi is on, and the only thing that I miss is the driver.  What is the secret of installing the HP online support site?  With the help of Windows OS 8.1.  Thanks for any help!

  Thank you so much for offering to help... This has been a very frustrating experience where I felt like I more, more was wrong.   It turns out that I solved the problem myself with a lot of trial and error and perseverance.  The location of the printer and our computers would not have allowed practical USB or ethernet connection tests.

  The computer has been grateful to the printer, but few of the functions of the printer did not work.  I kept getting notices that I need to be connected to Internet... and yet I was.   Instead, I followed every remedies proposed, and finally met and installed the HP Print & Scan Dr.   The full program would not even install, but I did use uninstall and reinstall the feature on the Dr. P & S and I noticed several MB difference between program he installed and which had been installed until then.

  The error kept showing a network connection problem, but I had already restarted the router several times.  When I got to the printer, I had loaded it a stable and permanent address through the router, so every time I "uninstalled and reinstalled then" software, it always by default the preset number on the router... that has been a blessing!  Finally, I got on the Web site of the real, connected and re-configured router the network connection on the printer using the PIN # that was generated (the WPS buttons had failed earlier) However, it happened, the resumed printer connected and I was able to print a test page.  All is well again.

• Error 1053 of the print spooler for HP Officejet 6500 a Plus All in One printer

  I get this error every time I try to install this printer. When I try to start the spooler in Services file, this error pops up. I ran a diagnostic and found that there may be errors of registry key in some files, but I don't kn Ow how to get rid of them. I tried every way start the print spooler, but he won't let me. Other diagnostic tools do not work because I can't even install the printer of dam. Help!

  The print spooler is a Microsoft services so that they would be the best people to talk to.  Most likely, the registry keys for the print spooler has not installed right.  My advice would be to format and reinstall the OS, but you can see what Microsoft has to say before doing this.  They may know a solution for this specific error.  Here is a link to a discussion I found on Microsoft Community on this issue.  I hope this helps.

  Print spooler starts windows 7 error 1053

• UNABLE TO COMPLETE REINSTALLATION OF THE SOFTWARE STARTER FOR HP OFFICEJET 6500 WIRELESS PRINTER-E709n

  After uninstalling printer of subject and try to reinstall using the start for printer software, I was not able to complete the installation.  After reaching step 4 on 4 set up your product 96%, the message "Fatal error during Installation" appeared. I tried the diagnosis not recommended and used the doctor printing & scanning without success.  I uninstalled and reinstalled several times.  I also tried to download the software to install it on the HP website.  I can do basic printing, but I can't scan or use HP solutions and cannot use some Quicken printing features.  I have not had any problems with the printer before you uninstall.  I uninstalled because I was experimenting with a new software of greeting.  My operating system is Windows Vista-32 bit.

  Hi there glendia,

  This article should cover the problem you are experiencing. Give the steps described under the specific error, you get a shot and let us know if it helps.

  Good luck!

• HP Officejet 6500 E710n-z: how to get the hardware support for HP Officejet 6500 E710n-z

  I'm probably in the wrong forum, but I'm not anywhere else to go.  Just throw it out there and I hope someone has the answer.

  My very reliable Officejet printer has lost the ability to feed paper from the paper tray.  It is that decend on top of paper rolls and are believed to feed the paper until the collection of wheels.  The rolls go down, but they don't happen, and therefore no paper feed.  I can gently push the individual sheets until the collection of wheels and printing works very well.

  Has anyone dealt with this kind of problem.  Of course, it's hardware related and I'll probably have to bring somewhere for repairs.  It's a great printer for several years and I look forward to replace themselves.

  Thank you.

  I bought a new printer because the cost to fix this little problem is higher than the purchase of a new machine.