Solve the problem of being unlisted - don't send emails from this IP

Similar Questions

• M400: I have solved the problems of the day before

  Hello

  I suffered all the problems on IE locks, don't not recovery from sleep mode and sometimes of hibernation and the continuous fan running.

  After changing things like crazy, I think I have solved at least sleep mode and hibernation, problems of updating the chipset and the Intel's IDE software. You can install it on top of Toshiba drivers with no problems.

  Chipset: http://support.intel.com/support/chipsets/inf/
  Storage: http://downloadfinder.intel.com/scripts-df-external/Product_Filter.aspx?ProductID=2101

  But I was unable to update Intel video driver, as any method I have chosen to do so tells me an incompatible driver, asking me to contact the OEM manufacturer.

  LUIS

  Hi Luis

  Thanks for the comments and info. I hope this can help other owners Portege.

  Good luck!

• Ghost of the sent emails from my email using my account, I guess that what needs to be done to stop or solve the problem?

  Ghost of emails sent from my email address. sent from my address book full. What does take to stop or solve the problem?

  Two things may apply here.  The first is that, in fact, someone stole your credentials because you signed in to your mailbox using a public hotspot.  If you can still access your mailbox with a web browser, on a private network (such as your home network) and change your password to something complex and unguessable, using at least 10 characters, the characters being a combination of uppercase and lowercase letters, numbers, punctuation or special characters.  Who must thwart those who have stolen credentials, denying them access to your mailbox.

  The second thing that can apply is that your box to the letters is safe, but your address was hacked, which means that spammers are using their own mailing envelopes but by specifying your e-mail as well as the mailing address, something that is very easy to do something that happens to almost everyone who allows their address be visible in a public forum (such as Facebook or an online discussion group).  This case if it is a serious problem and not a threat to you.  Since spammers change mailing addresses frequently, they will move to use yours.

  You can usually tell the difference between these cases because in the first case, you would probably lose access to your mailbox because the spammer changed your credentials based on himself.  It's a problem that you need to address with your e-mail service provider.   You can also see evidence of the compromise because targeted friends can send you copies of the messages they received, and you will be able to confirm from the message turned headers to your e-mail service provider's network.  The latter manifests mainly because you will begin to get NDRs to addresses that you don't recognize or are clearly fake.  In this case, just remove and stop worrying.  They will stop after a while.  Even still, it is always advisable to change the passwords to your services online all the months to protect against the compromise.  Tools like lastpass.com are beneficial to help keep you straight.

  Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  About a month ago I posted a question about iMovie and not being able to "share". I solved the problem thanks, so no more emails!

  Hi Michael,

  If you want to stop receiving notifications by electronic mail, in the thread, that you have created, then I suggest that you follow the steps below:

  One time connected to the Apple Support communities, visit your mini profile and select manage subscriptions.

  

  Content

  To manage this content, you are currently subscribed and changing your preferences, select the content.

  Select next to see what content you are currently following.  Note that any thread you are responding you subscribe you automatically to this thread.

  You can select to terminate a subscription to a thread.

  

  Learn how to manage your subscriptions

  Take care.

• I tried all the susgestions to solve the problem of some web sites don't load completle IE works well please fix this or I am done with Fire Fox, you retain to do fancy menus put he problems are still there

  I started using Firefox initially because of problems with IE that are now corrected. Fire Fox 3xxx was big then 4 came out worked ok until the first update, then pages will load completely, wheel just keeps spinning 5 was the same thing and 6 is the same. one solution is to disable Java, which makes the sites load but then other sites requires Java, can't keep turning on/off.
  Why so many people are add on is not compatible? Correct the problem of loading or I'll have to stop using Firefox and I like when working properly. Perfectly updated for Windows XP all add on s are up to date. There are several site to the problem sometimes, they do very well, but most of the time that they are not Richard

  I got exactly the same problem with FF6 so far. Drove me crazy. Disable the web shield in my AVG antivirus solved the problem. Looks like it has something to do with Google of JS in some pages. Filming of Javascript in Firefox also helps, but is not a solution.

  I already contacted AVG support. Don't know who is more responsible for this well, Firefox and it's the newest upcoming version every two months or Google/AVG because they just can't keep up with Firefox so quickly so often change =)

• Everything has been done to solve the problem with the FileVault have to be disabled in order to get the lights on the keyboard turns on at startup on the macbook pro?

  Everything has been done so far to solve the problem associated with the FileVault have to be disabled in order to get the keyboard lights turn on at startup on the macbook pro?

  I use FileVault. The keyboard on my MacBook Pro lights work perfectly. I'm under El Capitan 10.11.3.

• My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage

  My messages send and receive txt messages not iMessage on my iPhone and I don't know how to solve the problem to send and receive messages as iMessage

  Settings > messages > iMessage turn off then turn it back on...

  If it does not sign of your apple under messages ID.  Settings > General > reset > reset all settings (will not erase data).

  Then log in messages

• InterVideo Video Decoder codec can cause problems potential/when I run the fix, hit said it cannot solve the problem, I don't know how to disable the intervideo decoder told to do, please help?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Video decoder IdeaInterVideo codec can cause potential problemss:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Earlier, I used the Microsoft Fix it Center to turn off this problem.  I don't know if it is effective or not, until I had the chance to Surf Internet and just see if the problem occurs again or not.  Only time will tell.  The Microsoft Fix it Center is a part of the TuneUp Utilities 2011 program.

• Muse said that my file is damaged... I don't have a backup! In any case, I can solve the problem? I work on a mac! Please help me!

  Muse said that my file is damaged... I don't have a backup! In any case, I can solve the problem? I work on a mac! Please help me!

  I'm really sorry. Given all that's left is 4 k, is there anything I can do to recreate the 37Mb of your site.

  At the file never stored in a folder of synchronized cloud (i.e. Dropbox, Cloud Files, iDrive, OneDrive, GoogleDrive creative folder, etc.)? If so, these services provide generally access to all previous versions for a certain number of days, so you can recover the file in this way...

• I installed Adobe Creative cloud on my desktop but when I open the application on your window everything goes black, I don't see any information. What should I do to solve the problem?

  I installed Adobe Creative cloud on my desktop but when I open the application on your window everything goes black, I don't see any information. What should I do to solve the problem?

  This issue may cause due to the dual graphics card on your

  Try once step below

  Right click on desktop creative cloud > run with GPU > integrated graphics.

  If the option is not available

  Try disabling the Intel graphics card from Device Manager

• I updated my drivers and now my computer runs very slowly. How to solve the problem?

  I've recently updated my Intel graphics driver and my drivers Nvidia because they were terribly outdated. As a result, I am able to run some games that I couldn't run before, but my computer became very slow. Now, the startup time is significantly slower, and the worst part is that the actual performance of the system is slower. I checked in the Task Manager, and my physical memory constantly rotates between 40 and 60% (I have 8 GB of RAM, Windows 7) without any game or program being open, except the web browser and Skype.

  What is perhaps the reason for this problem? Is certainly the problem in the drivers? How to solve the problem?

  "My graphics card is GEFORCE GTX 660 M. Is it compatible with the latest driver? »

  Ah! A laptop computer. With laptops, it is generally better to download the driver from the mfg, not Nvidia.

  This is because the computer laptop mfg bring changes that can make the improper generic Nvidia driver.

  and while I always count should not slow down the system... You never know.

  "What services I need to run.

  
  Just to keep the correct terminology-

  Services is the area where you stopped the service of bitlocker.

  The start is where you keep things from loading when you start in Windows.

  -Most of the time what's in Startup deactivation is something personal need, but there are some things that

  I must be on the left.

  I leave the Intel common user interfaceand Installshield update service, mainly because I don't bother

  Discover what they are doing.

  I also let anti-virus, Realtek audio, software profile keyboard and a few other things active.

  I don't have Adobe Flash loading with Windows, but I don't use it a lot, and when I do the software that

  uses it it launches automatically.

  The bottom line here is that if you have software that you use all the time, it is more convenient to have it start with

  Windows.

  -Concerning the Services. This also has to do with personal preferences to a certain extent, but most things can be left alone.

  I do not use the Services tab in the Configuration of the system, because I think it's only a one time adjustment.

  (Clean boot, linked earlier, is the best tool for the verification of conflicts with Services)

  To stop or disable a Service manually, tap - services.msc - in the run command to open

  the main window of Services.

  There is an Adobe Flash update in Services that should be kept, but when Adobe makes an update

  I select the option notify me, but not to install it automatically.

  I always preferred this with any updates, including Windows updates as there is less chance of a corrupt

  Update If you're aware, it happens and do not do something intensive system while the update is being installed, particularly when an update requires a restart to complete.

  -Registry. In the control run, type - regedit - and browse the registry with the file path in the

  previous post and follow the instructions. You can save the key you are modify if you wish, that the use of the

  backup to change the value to what is current would be faster than navigating to the key again.

  -When playing around with things you are not familiar with creating a System Restore point before you

  making these changes is a good insurance policy.

  If you don't know how to create a system restore point - time to do some research.

  In fact, all of the above is covered by tons of tutorials out there in the www.

  SSD vs HDD - the specifications of the system for you the machine should be in your user manual or on the

  MFG web site.

  Prefetch is useful with HARD drive, because it improves performance somewhat, but read-ahead is not really necessary with SSD.

  and can reduce the life expectancy SSD a bit (there is debate on gravity)

  More research for more details. D

  -If you use a HARD disk and that you have enabled Prefetch, the Prefetch will be rebuilt over time, if you delete the files.

  -Here's another tip for when you are not sure of the impact of deleting files.

  Rename file/folder. You can do something like add another couple of P to the front, or a 1a which will move

  the file to the top of the window. If nothing is wrong in the next few days, you can delete the folder.

  This method protects to empty the trash accidentally and lose the file/folder.

  -Speaking of deleting the file. A great TEMP folder can slow things way down.

  Run Windows, Disk Cleanup . This will remove many files in the Temp folder.

  Or, for a full, clean, go to the - your User\AppData\Local\Temp

  Open the Temp folder and delete anything that can be deleted (impossible to delete the files that are used).

  -Defragment your HARD drive

  -Run the Zig - zag Kit you'd use again and analyze the results.

  It was a long, huh!

  .

• Geolocation has stopped working in Firefox 24 after update (Win7 64). Downgraded to FF 23.0.1 solved the problem. Even with the other installation of FF to another PC.

  Visit this page: https://developers.google.com/maps/documentation/javascript/examples/map-geolocation or any other website using geolocation to track my location shows a blank map and no prompt "share location: allow, block, not now."

  This has happened since upgrading to FF 24 (Office Win7 64). Decommissioning of FF 23.0.1, solves the problem: FF before 24 supports geolocation without problem. Tried in my desktop and laptop with separate FF, using different plugins installations.

  Thank you in advance.

  [NOTE: now using Firefox 23.0.1, the problem does occur only after upgrading to Firefox 24]

  Uninstalling Firefox completely from my laptop and install it again, solved the problem.

  I have not yet tried with my office.

  The laptop uses whereas the ethernet office wifi. The problem exists in the installation of the laptop FF 24 too, so I don't think it was the root of the problem, at least in my case.

• Wil Windows 7 does not start and is not able to solve the problem

  Hello

  I tried several things at this stage. I have a Toshiba that windows is not able to solve the problem on its own when starting. InsydeH20 BIOS, I have ensured that the system must start using the HARD disc as shown.

  When the problem started he said that the problem could have been caused due to a media device may have been connected to the computer and that Windows could not fix the problem automatically. I was then able to enter the menu to try to do a system restore; It did not work. From that moment, I opened windows to use the F8 key and was able to start using the corrupted files, but now after a update tried to install all I get is a black screen with a white line of underscore flashing in the top left of my screen.

  I downloaded an ISO file for Windows 7 from my other laptop and was able to boot from there to get to the point where I would be able to try a system restore, use the prompt, etc., but even once it is not solved the problem.
  At some point, the screen showed that there is a cable that is not connected or something, I don't not entered all of this, but I do not know how to check this part of it. Could someone please give me direction from here to what I can do?

  Thank you

  > However now after a tried update install all I get is a black screen with a white flashing line of underscores in the upper left corner of my screen.

  This is a typical symptom for a faulty HARD drive.
  I had the same cursor blinking in the upper left corner and finally I could solve this problem using the new HARD disk.

  > At some point, the screen showed that there is a cable that is not connected or something.
  Maybe you mean the error: pxe/e61: mediatest failure, check the cable of
  This happens if the portable computer is trying to boot from LAN. This happens because the OS on the HARD drive is not bootable, and this happens especially if the HARD drive is malfunctioning

  In my opinion, you need to change the HARD drive.
  I think this should solve the problem.

• I tried to solve the problems to the existing solution in this forum. I still get error 50405

  Dear,

  I use USB-6009 for controlling pumps, valves, and two Mass Flow Control. Each two cycle I get error 50405. I tried to solve the problems in the existing solution in this forum, but the error always showing each cycle 2 of the operation. I enclose my VI filled for the expertise, I was wondering if its design issue? Home shot of the error screen. Thank you.

  You have certainly a few design issues.

  The structure of stacked sequence tends to create more problems than it solves. I the have not used in new programs since version 1.2 of LabVIEW (in 1989). A state machine is a much better choice of architecture.

  Local variables can cause race conditions, copies of additional data, poor performance and it is difficult to debug code. There are special cases when they should be used, but these conditions are not in your code. Just wire directly on the terminals of control at the scene, the data will be used.

  My guess on the likely cause of your error is the use of several DAQ Assistant to perform the same task (with different data values) in each image in the sequence structure. With the arcitecture state machine that I suggested above, you would need one. The DAQ Assistant trying to be clever on the configuration and tasks of closing, but different instances do not speak with each other, so they don't know when to release the resources.  You might be able to do work if you used the DAQmx screw standard you have done with the task of digital output.  You do not connect the error lines of the DAQ Assistant for you can be missing errors.

  Indicators and controls without legend may be a troubleshooting nightmare. Please give each control and seeing a unique label. If you don't want the visible label on the front, you can use the properties of the control to hide. If you want multiple controls to have the same visible text for the operator, use the legend.

  Learn how to use subVIs. Most of the code in the 6 images of the structure of internal sequence is identical. By converting only a Subvi, you would reduce considerably the size of the diagram and if you ever need to modify the code, it should only be changed in one place - the Subvi.

  The while loop in frame 0 of structure of outer sequence is a "gourmet" loop He's going to run as fast as possible and seize all available CPU resources until the user presses a button. Put a wait function (ms) in the loop with expectation of ~ 100 ms. best, learn how to use the Structure of the event for user input.

  The second loop inside of the structure cases inside does nothing and can be removed.

  Many of these objects suggest that you have a programming background using the text-based programming language.  LabVIEW uses a paradigm of data flow that avoids largely for things such as the structure of the sequence and the local variables. I recommend that you work through the tutorials online on the Getting Started with LabVIEW.

  Lynn

• I have no sound when you try to play CD or youtube. My speakers are new and have worked before and my volume is high enough. What can I do to solve the problem, please?

  My computer has been repaired a month ago.  Its worked before but not after bringing the store.

  Hi Anne,.

  Thanks for posting your question on the Forums of community of Microsoft.
  From the description of the question, we understand that there is no sound from the speakers to the computer.
  Let me go ahead and help you with the issue.
   
  If you could answer a few questions that would help us resolve this problem:
  1. don't you make changes to the computer before the show?
  2. What is the brand and model of the computer?
  3. what version of the operating system is installed on the computer?
  4. do the sound problem only occur when playing a CD or watch videos of youtube?

  5. what web browser do you use for videos of youtube?
   
  I suggest for the link and follow the steps in the article following the operating system installed on the computer.
  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Also see links:
   
  No sound playing an Audio CD in analog Mode on USB speakers

  http://support.Microsoft.com/kb/306706

   

  Adjust the sound level on your computer

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

   

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.