[SOLVED] Double modern screen

Similar Questions

• Double desktop screen "stacked" on first office on a single monitor after using two monitors Netflix to the TV

  Double "stacked" on first desktop on one monitor - desktop screen came just after using two monitors (Netflix on TV extended

  My computer kept crashing after I had hung a dual monitor.  The second monitor was my television, playing a Netflix movie while I also used my computer to work on.  After splitting the two, I kept crashing for a few days.  I tried to delete the second monitor in the display settings, but does not know how to do this, if it's possible, but I think it's the problem and the cause of the double view of the desktop on my computer now.

  Does anyone know how to confirm what the problem is for some, and/or instructions how to solve this problem if you already know what can cause this problem.  No assistance at all would be greatly appreciated.  I tried to understand this two days...

  Note, in the heat of the Las Vegas area, I thought this may be due to overheating, but I actually he cooled in the refrigerator for a short time and restarted, but still have the problem.  Thank you.

  You have a Nvidia 8600 M GS graphics chip located on the motherboard, the drivers for it are provided by your manufacturer, HP, PC-specific to your model and NOT of the site MSUpdate or Nvidia.

  http://www.nvidia.com/object/notebook-Win7-WinVista-258.96-WHQL-driver.html see the following"However, please note that your notebook original equipment manufacturer (OEM) provides certified for your mobile drivers specific to their Web site. NVIDIA recommend you check with your OEM laptop on the software updates recommended for your laptop. The OEM cannot stipulate support technical issues raised by the use of this driver. »

  Since you apperently have a laptop / Notebook, you get all pilots that manufacturers of PC and NOT of MSUpdate site system. Driver version numbers shown on the MSUpdate site cannot be relied on as correct

• Cisco profile 52/55 double - video screens on a single screen after software upgrade 7.1.4

  Hello

  I improved 52/55 to TC 7.1.4 double profile system and it displays more video on two screens at a conference. It displays the contents of the second fine screen. He worked in version 6, so I'm wondering if something changed in the software or endpoint requires additional configuration.

  I checked the settings under Configuration > system setup > video > monitors and it is set to Dual. I changed a few times and set it to the double, but this does not solve the problem. I do not see any option button double screen added under system information, but I guess that's an option double screen so it's a dual monitor system.

  I need to change any settings?

  Cisco has changed how layouts behave after TC6 on C-series systems. If you want your system behave in the same way as a Tandberg MXP more used to work (end of full screen on a single screen) and selfview full screen on the other, you can do the following telnet commands:

  xconfig video monitors: double

  xconfig video CamCtrlPip CallSetup Mode: Off

  xconfig video SelfviewDefault Mode: Off

  xconfig video SelfviewDefault OnMonitorRole: second

  xconfig video SelfviewDefault modepleinecran: on

  I had a lot of customer complaints after the upgrade and these orders have been tested by Cisco and I've applied to many of my clients and it works.

  Hope this helps your case

• When I click on an e-mail recipient address, I get a double post screen

  As well as the double screen, when I move the cursor to the top left of the message box, a window pops up that says "Publisher of advanced properties" and inside the window, text #000000 and bgcolor #FFFFFF she says. Any help would be appreciated. Thank you.

  Looks like you have a mouse that's wrong and deliver a double click when clicked. Your questions would be caused by a double click. You have another mouse that you can try?

• Skype sign in the problem solved in phones screen touchscreen nokia s60v5 symbiam.

  Hi NOKIA users!, I solved the Skype sign in problem for nokia 5800 and all the symbian (s60 v5) of touch screens... Now, how to resolve this problem, follow these steps.
  Skype 1.Install in your phone's memory...
  2 hack your phone with these easy steps =
  3. install Norton symbian hack into your phone.
  4. after the installation, open it and open 'Options', then click on "Anti-virus" and then click Quartinine the list, then click on ' restore all.
  4. install Plus patch Rom and open it... you will see two options = Install serv for all, and 'open to all'.click on these and two options will be output green.now rom patcher.
  5. now download the zip from this link =
  www.4shared.com/zip/a9Ubez_gce/Skyp_sign_in_files_for_s60_v3_.html .
  
  Unzip it and you will have two files = Shared.xml and shared.lck...
  6.now COPY files of teas on c: phone memory/private/20024 D 77 q
  ("- q" is the name of the folder, now both q and - q).
  7.attention! You must install the Netqin Mobile guard to copy these two files.
  8 install and open Netqin mobile guard.click to file manager, click memory c: from the phone... you will see a folder name is 'PRIVATE'... open draconian, open the file, the name is'D 20024, 77'... Here, you will see a folder whose name is "-q" If this folder is not here, create the folder = - q... Now copy these two files (shared.xml and shared.lck) in this folder.
  9.now try to sign in.skype sign on the first try... Enjoy. For more information, contact www.facebook.com/tanveer.afzal.334
  
  File download link =
  www.4shared.com/zip/a9Ubez_gce/Skyp_sign_in_files_for_s60_v3_.html ...

  Hi friends! I changed my facebook email.
  But I'm telling you that Skype will no more work to buy everything from phone.plz symbian, a mobile phone androia to continue using Skype! Buye.

• Blue Screen BCCode: 10 d, is could someone help me solve the blue screen issue?

  Hello
  Is that someone could help me to solve the problem of blue screen. Thank you
  BCCode: 10 d
  BCP1: 0000000000000008
  BCP2: 0000057FE24DC4D8
  BCP3: 0000000000000004
  BCP4: FFFFFA801BA97A90
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here
  If you have any questions regarding the procedure, please ask

• Management double color screen?

  So I have a Setup dual monitor running OS 10.7 on a Mac Pro, and the color in bridge CS5.1 on my second screen management is a mess. Two monitors were calibrated individually with a Pantone Huey Pro (not perfect, but generally quite uniform between screens).

  View an image in bridge on the screen of my first, I have no problem. But the same image, on my second screen, appears highly saturated. When I open the image in Photoshop or preview, the color is accurate and is compatible on both screens. The image below illustrates the problem: the colors shown correctly in Photoshop (foreground) and incorrectly in Bridge (in the background). The Creative Suite color in show bridge settings settings as "synchronized" with the "North American universal 2" default. "

  

  I am out of my depth here when it comes to color management. I have something set wrong? Is this a bug related to the Lion? Any help would be appreciated.

  The way I put it in place is this: I have two synchronized windows, one on each of my two displays. In one, I have a content panel, metadata, collections, etc. In the second window I just a Preview Panel, providing a full screen (or almost) an overview of any miniature that I select in the Panel content in the other window.

  Content (assuming that thumbnails so) overview of Panel on a screen and Preview Panel Preview on the other screen are both generated by an application and the bridge. As I said above, I don't think, in fact I'm almost certain that it is impossible for the bridge to withdraw because of double matrices (mathematical formulas) written in each custom display profile which occupy the same video chip to calculate and control the appearance of the hue/saturation in color managed images. Think of the complexity involved. Now Adobe is known to create miracles of workflow with their programming but I doubt they'ld be able to remove with bridge.

  Photoshop can pull this wide having an image on a screen and drag to the other where it makes adjusting on the fly. I saw the rapid change that occurs it making. But I don't think that bridge can do so due to the caching structure. I hope an Adobe employee chimes in correct me.

  Now it fits in your forcing mentioning a display space sRGB during calibration and profiling of each screen. This isn't what happens to make a hardware calibration. I guess you take your target Luminance (120 cd/m2 + /), Gamma (2.2 gamma-usually native) and color temperature (6500 K). It does not matter if you did anyway, but what is the calibrator material is as RGB colour and density range of each screen and write the data to the final profile which allows applications such as Colorsync to show a 3D model range and color managed like Photoshop applications to show the colors as expected.

  Your screen may be close to sRGB but never accurate to him because sRGB is a synthetic (manufactured) color space. Your screen has physical abnormalities that should be measured and written in the profile to display correctly the planned appearance of color that references the CIELAB color space based on human vision. All about color in a color management workflow is based on the mapping color to display properly depending on the size of the range. A computer is a stupid machine and said all using mathematics. Haven't you actually draw a plan to follow.

  The bridge preview pane in search of different can make reference to the other display profile or is stuck with reference to the other and what is happening is the equivalent of assignment among the profiles of the preview display, as you can do to an image in Photoshop. Try it. Take your image and convert it to one of your display profiles and assign the other display profile. Check if you see a slight delay. If main viewing pane of the bridge is stuck showing pixel traced in sRGB (synthetic) then the same assignment of the effect of display profile takes place.

  Or color thumbnails are not managed and the preview pane is and maybe a bit of the foregoing is mixture of things. If you're not confused now imagine you write mathematically miniature previews on one screen and the main preview on the other two, controlled by a single application on top of the caching and manage a database of the big picture?

  Keep the preview pane and the pane content on a screen. Edit your images in Photoshop/ACR/Lightroom on the main display.

  The color settings where you select North American prepress... Web... General use... etc. applies only how images are processed and previewed that do not have an embedded profile. Your jpeg images are integrated with a profile? If yes then this isn't the issue. This applies to the Raw capture because their previews are generated by Adobe Camera Raw default settings.

  Omke, not more than Version Cue? That is good news!

• I get double Firefox screens declined downloads articles. With the help of FF19

  FF19 opens fine. However when I go to open an article reduces the brightness of the screen and when he returns to retouch the brightness, there are now two screens, one behind the other. When this happens, I am unable to do anyhting in FF and must end the process.

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

• Portege R600 / A600 and double output screen

  Hello

  Could you tell me if it is possible to output to two screens on the R600 or A600 with any of the Toshiba Docking solutions?

  I was told that it is possible, however I was told today by the sales of Tosh is not possible to do. I want to end my home pc and the desktop pc and just wander between the two with a laptop. However, I use an extended desktop on both screens and would need this work.

  Any advice on that?

  Thank you

  Paul

  Hello

  As far as I know you can t use two external displays. It is only possible to use the internal LCD screen with * a * external LCD display. That s what you can do.

  But I put t understand why you want to use two external displays the internal display is good, you can extend the Windows desktop on an external monitor.

• IQ816 double video screen LCD (multiplex) problem

  I have an iq816 in which the motherboard just died, then it wouldn't turn on, POST, nothing. The motherboard has been replaced and the system now starts at the bottom of windows very well with one exception: all that is shown on the display is multiplexed 6 times. The image to fill the entire screen fills to only 1/6 of the screen and is repeated 6 times. The machine has no video output, so I can't test an external monitor.
  
  Here's what I know so far:
  1. the symptom appears during the during the POST, not only in Windows and BIOS configuration screen, then it cannot be a driver problem.
  2. the system has a video card discrete MXM and two LVDS ports on the motherboard (LVDS2 for discreet video) and LVDS1 for the embedded video. I already tried to remove the discrete video card and connecting the LCD to LVDS1 (integrated video), but the problem persists, this isn't a video card problem.
  3. in the configuration of the BIOS, the machine claims to be an iq504, not an iq816. I know that the machines take the same motherboard (same HP reference at least), so I don't know whether to be alarmed by the present or not. I tried to Flash the latest BIOS for the iq816, but the listed model is always incorrect. Is there another firmware, I need to flash, or is it a distraction?
  4. There is a set of DIP switches on the motherboard that I have not found any documentation on, but they are labeled GPIO, so I doubt they will help. Yet, no idea this here?
  5. There is a block of jumpers 8-pin without a label. I think that the bit is used to reset CMOS and reset password, but would like to know what are the other pins.
  
  6. the causes I can think of:
  A. bad cable LVDS (other on command - update)
  B. bad screen LCD (game over)
  C. something to do with this strangeness of motherboard model
  
  Thanks for any help/insight!

  Hey joesuffceren,

  I'm sorry that you use in this show, but thank you for providing this useful information! I did some research on your motherboard.

  Here is a link showing the motherboard specifications - develop internal connectors

  GPIO is listed there as the DIP switch used in the factory to match the motherboard to the LCD so it might be your answer. I searched for any kind of documents I can find on which positions the rider must be on for the iq816 but have not yet find something. I wanted to get this information for you right where you want to go ahead and try changing this autour rider to see what works.

  I hope this information helps! Forward to your response

• Helps to solve the blue screen error 0 x 24

  Original title: the blue screen of death

  My widows Xp got the blue screen of death, ofthe ERROR (0 x 00000024) he tells me that I need to run CHKDSK. I don't know how to make it work and I can not start safe mode because it brings back me to the blue screen.

  I don't have the disk, but I have a Cd to burn files on.
  PS. You can go into details as I am new on this computer setting
  Thanks Chris O Rourke

  Because a lot of people doesn't seem to have an XP Installation CD, I have these instructions on how to create a CD of bootable XP Recovery Console and run chkdsk (no XP media required) program.

  If the forums MS Answers would invite for a little information system, when a new question is asked, you would be probably done now...  I take for granted that you have an internal or external CD/DVD drive that is functional.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD (do not install UniBlue or the Ask Toolbar - never!):

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Not start only progresses to double blue screen after the force-feeding down

  After many troubles with Trend Micro and following their instructions, I was to open a session and turn it back on.  However, first disconnect and restart options did not work so I had to cut the power.  When turning it back on, the PC got to a screen with dark blue strips on top and bottom and Microsoft XP logo in the blue middle panel.  After trying various boot options in different modes of security etc and running drive Diagnostics (all past) the PC arrives in the same condition every time.  Dell won't talk to me given that all three of my PC are too old, according to them.  I saw on their site where there was such a problem after the update from another provider visus (AVG) where a CD of XP Windows Setup specific should be used with the Recovery Console to be run.  It's something on the order of what the Trend Micro tech said I should do.  With the exception, since Dell won't talk to me I can't get the CD.  With all three PC I bought home, actually provided with a CD because "your new computer does not require an operating system CD".  How can I get such a CD for XP or is there another way?  SW_Engr

  How does this relate to the features of Windows Update?

  If you have purchased the Dell with Windows XP (?) computer pre-installed, Microsoft will NOT provide replacement discs.

  If your computer came with these discs, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do a clean install (AKA destructive recovery) of Windows. See http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_181316&isLegacy=true

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Z3 double broken screen cannot remove data or cut completely.

  HI, I have a Z3 twice and broke the main screen. I want to delete all data before sending it for repair but the screen does nothing.

  I went through the steps detailed here - http://talk.sonymobile.com/t5/Xperia-Z3-Z3-Dual/unresponsive-screen/m-p/1007534 but I'm not able to switch the phone off completelly - only a soft restart using the power and volume button - the phone then restarts before I can move on to step 4 where I connect the usb with the low volume button. At that moment the phone has rebooted.

  Which allows the phone to completely run out of battery is not an option as above requires at least 80% battery even when it is plugged.

  Is there another way to delete all data or another way off the complete phone using other buttons?

  Thank you.

  Sorry to hear about your phone.

  To turn off the phone, try to keep the yellow button next to the SIM card for a few seconds. Does he put it off so that you can make a PC Companion software repair.

• Double/split screen problem

  See attached image - during an editing tool, my main monitor splits program in 2, timecode is displayed, and I have to wait a few minutes until it stops! I can rub my calendar, but it makes no difference.

  What is going on? I just got a new PC 2 weeks because I thought that my old one was too slow for 2015 CC - I spent over 2 k € to this exact issue go away! But it's still there!

  

  Thank you.

  Hello

  Please check the forum post below.

  Re: Program Split window monitor problem editing feature.

  Vinay

• How can I solve the white screen issue in adobe cs6 speedgrade?

  http://img4.photo.qooza.cc/userphoto/4/0/458040/1185010/40958770bc4b4b5e.jpg

  OK... no matter what other Adobe video apps loaded? Any other applications, 3rd party or plugins, like plural eyes or other things? Just chasing here, as there are a few things that can glitch until Sg...

  Neil