Some applications does not respond after sleep (El Capitan)

Similar Questions

• End of 2012 iMac keyboard does not respond after sleep

  I have an iMac late 2012 and my keyboard does not respond after that lay down the computer.  When I type the password box is very slowly filled with random letters that are not my password and hit enter just adds another letter.  In my view, that it is a common problem that I am many have known for a few months.  Is there a solution to this I have reset PRAM and SMC, and no work.  It's very irritating and I hoped with every update from El Capitan, this would have been fixed, but not joy.

  I don't know about "modern" Mac and OS X versions, but on my old Powerbook / Tiger awakened from his sleep, it was necessary to 'click' somewhere (I clicked on always in the password field) before the same keyboard would meet all

• HP LaserJet 200 colorMFP M276n slow or does not respond after sleep/wake

  Hi all

  Bought a printer HP Laserjet M276n colorMFP 200. Set up the printer and it's printing of windows and mac computers (also via the local area network (wireless) and even the iPad and iPhone) and scan directly to the pc and mac. Also configured the network folder scan function. Works like charm.

  But... When I try to do something after the machine is in "standby mode" everything goes wrong.

  1 - printing takes longer path to front.

  2 - operation of the toutchscreen (for scanning to network folders, or to photocopy anything) is not feasible. If the machine says it takes about 10 to 15 seconds per order. Sometimes the machine does not respond.

  3 - wireless devices sometimes have trouble with the connection to the device.

  4 - access to the machine via the web interface content (yet) is slower, if not impossible.

  When I manually reboot the printer (using the power button) the machine works fine again.

  But I can't immagine what how HP intends to use the machine.

  Anyone know how to solve this problem, or if it could be a configuration error during my dissertation?

  Also is it possible to disable the sleep mode at all?

  Thanks in advance.

  Kind regards

  By Duringshoff

  The program installation/Specs:

  The printer that is connected to a switch. Connected to the router (wireless).

  Printer is not directly connected to any computer over the network.

  On the printer, I put 'Sleep delay' to '1 hour '.

  On the printer, I set 'Auto Power' down on '' never. ''

  MacBook Pro 13 "under OS X 10.9.1"

  Windows PC and laptop. Both running Windows 7 (Service pack 2, I think)

  IPad IOS 2 7

  IPhone 4 running IOS 6

  router: Cisco EPC3925

  switch: Netgear GS108

  Thanks for letting me know Per_Duringshoff.

  I checked online and the latest version of the firmware is 20140521. But it is not a list for 10.9 update.

  10.8 has the firmware update available. If you have less then 10.9 another Mac or a Windows computer, you can run the update of the firmware in this way. Color HP LaserJet Pro 200 pilot M276nw MFPS.

  Let me know when had time to try the steps listed and if it helped.

  Have a nice weekend!
  Thank you.

• iMac does not respond after sleep

  I lock the screen of your iMac and let him sleep for an hour. When I come back, the keyboard and the mouse is unresponsive. This forces me to hold the power button to restart the iMac. This happens whenever I put the iMac to sleep. I did quick simple retouching of resetting the SMC and the PRAM, but the problem persists. Don't know what I'd do...

  The specifications for the iMac are:

  iMac 27 in. (end of 2015)

  El Capitan 10.11.3

  Here are two excerpts from the system.log:

  Apr 19 10:43:15 slusarskid-imac kernel[0]: hfs: mounted Recovery HD on device disk0s3
  Apr 19 10:43:15 slusarskid-imac mds[61]: (Volume.Normal:2464) volume:0x7fdcbb843e00 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
  Apr 19 10:43:15 slusarskid-imac sandboxd[130] ([557]): Finder(557) System Policy: deny file-write-create /Volumes/Recovery HD/.Trashes/1336746898
  Apr 19 10:43:15 slusarskid-imac SophosMcsAgentD[446]: [SMEMcsEventBroker.m:150] McsEventBroker: connection status: 503
  Apr 19 10:43:15 slusarskid-imac SophosMcsAgentD[446]: [SMEMcsEventBroker.m:169] McsEventBroker: error state
  Apr 19 10:43:15 slusarskid-imac SophosMcsAgentD[446]: [SMEMcsEventHandler.m:453] McsEventHandler: failed to send queued events; will retry (attempt 1)
  Apr 19 10:43:15 slusarskid-imac kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
  Apr 19 10:43:15 slusarskid-imac kernel[0]: disk1s3: alignment error.
  Apr 19 10:43:15 --- last message repeated 1 time ---
  Apr 19 10:43:15 slusarskid-imac kernel[0]: hfs: mounted Boot OS X on device disk1s3
  Apr 19 10:43:15 slusarskid-imac mds[61]: (Volume.Normal:2464) volume:0x7fdcbd004e00 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Boot OS X
  Apr 19 10:43:15 slusarskid-imac sandboxd[130] ([557]): Finder(557) System Policy: deny file-write-create /Volumes/Boot OS X/.Trashes/1336746898
  Apr 19 10:43:16 slusarskid-imac kernel[0]: hfs: unmount initiated on Boot OS X on device disk1s3
  Apr 19 10:43:17 slusarskid-imac kernel[0]: Sound assertion in AppleHDADriver at line 3593
  Apr 19 10:43:25 slusarskid-imac ManagedClient[1509]: ODUGetMCXRecordWithCache() Network user record from Active Directory may contain mismatched attribute information.
  Apr 19 10:43:27 slusarskid-imac kernel[0]: Sound assertion in AppleHDADriver at line 3593
  Apr 19 10:50:06 localhost bootlog[0]: BOOT_TIME 1461081006 0
  

  Please remove the Sophos product by following the instructions on this page, so this one, if any. If you have a different version, the procedure may be different.

  Back up all data before making any changes. Never install a software "anti-virus" or "anti-malware" again.

• 6 Lightroom does not respond after sycing mobile application

  6 Lightroom does not respond after I tried to sync with mobile App. anyone having this problem?

  Trudy

  Hi uncagedwoman,

  • Please go the library Module, then go in the preferences.
  • Go to the performance tab and uncheck the option "use graphics processor.
  • Restart lightroom. and check

  Please let us know if it helps.

  Kind regards

  Tanuj

• Thunderbird starts by does not respond after the update to version 38

  I've updated to version 38.0 yesterday and since then whenever I open Thunderbird, he refuses to open and top watch does not respond. I have to close it via the Task Manager. What's past and how to fix it?

  > I tried in safe mode and it opens and I see my mail but when I try again to open it in mode normal it is just the same thing.

  This clearly suggests that something you added to Thunderbird or the operating system is causing at least some of your problems. If the problem occurs with the OS in normal mode and Thunderbird in SafeMode - http://support.mozillamessaging.com/en-US/kb/safe-mode - then you should suspect a program that is loaded by the operating system, such as antivirus. But if it helps me to http://support.mozillamessaging.com/en-US/kb/safe-mode , then the problem is related to an add-on, or accerlation of material found in tools | options | Advanced | General

• Satellite T110-121 - Wireless does not work after sleep in Win7 Home Prem 64

  Hello

  I bought Toshiba Satellite T110-121, with Windows 7 Home Premium.

  Problem:

  1. after going into Sleep Mode, when he wakes up, my WIFI does not work, unless I'm in wireless network card setting, Advanced tab, then I change the Tx to say 100% to 75% power level, then the WLAN will work.

  2. I tried to adjust the setting for power management on the network card for maximum performance and does not disable during sleep and also in the Bios but nothing is

  3. I use Realtek 8191SE drivers have been updated (wireless card, Ethernet, Bios)

  Thank you

  As much I know Tx power level option must be set to Auto.
  Have you noticed the same behavior with Auto option?

• G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive

  My laptop received disc hard failure two months and he died since then. I intend to change the hard drive of the laptop as soon as the order arrives in a few days. But now the problem is that as if now the keyboard of my laptop does not respond. So I would like to know if this problem will be resolved after the replacement of hard disk or is related to the software / operating system of your laptop?

  Help, please...

  Sorry I couldn't answer yesterday.

  The update, is that when I tried to turn on the laptop as well by pressing the ESC. The laptop did not respond initially but then responded in the end, but after that, there is no answer.

  Now Mr. President, I would like to know your end on this issue?

  Thank you

• Windows Mail does not respond after receiving a script error message.

  Whenever I press a button made a noise of ping?  can not shut down windows.  Just does not respond?

  "Em" wrote in the new message: * e-mail address is removed from the privacy... *

  Whenever I press a button made a noise of ping? can not shut down windows. Just does not respond?

  Right click on the taskbar background > select Start Task Manager, on the Applications tab, select Windows Mail > then end task.

  Best regards Steve. MS - MVP. MAIL. [DTS] UK. http://www.getsafeonline.org/

• Elements Organizer 9 does not respond after failure

  Hello

  I hope someone can help me as soon as possible about this. I just change the pictures in the item editor, open the photos in the Organizer. The power's out, computer off. When the power came back, editor works very well. But organizing but as soon as I click on a photo, she weaves, Greys ot, unresponsive. I click to let him recover, but it does not work.

  What happened when the computer shuts down as it causes this? I am new to PC, so need a lot of details.

  Thank you very much for any help!

  PS: Windows 7, Dell Studio computer.

  If this does not work after you remove the file preferences too, I would try this http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Ref215030515

• Tecra S3 - Intel PROSet/Wireless window does not respond after changing settings

  Given that I've updated the driver and the utility Intel PROSet version 9.0.4.17 driver and tool PROSet to version 10.5.0.1 for Intel BG2200 WLAN card to build-in the PROSet tool window freezes every time after that I changed a parameter (for example, by adding a new profile).

  Closing the window with ALT - F4 also does not work unless you kill the process in Task Manager.

  Is this a known problem or is there any group of fixes for the driver or the Intel PROSet tool available?

  Hello

  The ProSet utility is a clean product Intel and if there are updates you find on the Intel Web site.
  But in my opinion, there is only a corruption of installation.
  How do you install this app? Have you removed the old version first?

  I think that if you want to update the programs, you must always first remove the old version and then after reboot of the new laptop, you can begin the installation of the new version.

  You could use additional own program register as a CCleaner. It s a freeware application and it checks the registry for some corruptions.

• OfficeJet Pro 8000 wireless: OfficeJet Pro 8000 wireless does not respond after a certain time

  I use my wireless OfficeJet Pro 8000 for quite awhile now, but I have a problem that I can't solve:

  Initially, it works allright. But after a few hours, it seems to go to sleep. And it does not print jobs more. I have to put the printer 'off' and 'on '.  After that, it will print the work queue.

  I searched a timer as issues in the web interface of the printer, but can't find anything that points to a solution.

  The printer is connected wireless to my router, using a 'fixed' IP address

  Can someone help me, please?

  Thankx

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  While the DHCP is convenient, devices like printers must always be assigned an IP (fixed) manually to avoid conflicts on your wireless network.

  1. Set a static in the printer IP address (click here) outside the range of the DHCP of the router (check your manual). It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this first if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).
  2. Or check in the printer "Auto off" is disabled the System Mode Time Out is set to zero (0) Use the built-in webserver (EWS) by visiting the printer address IP address in the address bar of your browser, click on settings tab/Auto Off. Or use the printer, printer Home Page (EWS) Wizard. Also check the properties of your printers.
  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.
  4. If necessary and you have assigned a static IP address, try using auxiliary for the preferred DNS Server 8.8.8.8 and 8.8.4.4 as DNS server.
  5. Wireless printers work only on the 2.4 Ghz band.
  6. Make sure the printer is on the latest firmware by checking with the HP support site.
  7. Check all devices wireless in your home for interference. Check microwave, babyphones, phones, wireless and wireless alarm systems are a big culprit. Any of these will knock at your printer wireless intermittently.
  8. Make sure that your printer and router are at least 6 feet, independently of the other.

  In the router: (refer to the manual of your router for more information)

  1. Use a fixed wireless channel as the 1, 6 or 11, never 'auto', try channel 1 first then the rest.
  2. Set the router to 20 Mhz only or 145Mbps router function.
  3. Always use WPA2-AES encryption (personal), but you can try the "mixed" mode
  4. Disable the WPS and never use it and disable the UPnP for the security of routers. No one can hijack your system now and help with wireless connectivity (if you want to know why, research on the web).
  5. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure the SSID is NOT identical, they must be different for all the bands, even for networks without comments.
  6. SSID broadcast should be enabled.
  7. Save all the settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.
  8. Marketing the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

  Last resort effort - if your printer has an Ethernet connection, suggest you to get some adapters line and convert your Ethernet wiring for your printer.

• bridge to aid does not respond after the effect presets

  Bridge stops responding when you try to use or to get an overview after effect presets. The application never gives me the error "not responded" but but does not not in stocks. It could be because the computer is old?

  MAC

  10.11.4

  3.2 ghz intel core i3

  12 GB of ram

  ATI radeon HD 5670

  Measures taken

  Destroyed bridge preferences.

  Uninstalled the application > Reinstalled

  Thoughts?

  This has been resolved with the new Update 2015 bridge

  

• Safari not responding after sleep

  Whenever I open my MacBook Pro after sleep, Safari unresponsive. It won't let me not normal quit, or even force them to leave. It just sits there with the colorful, beach ball until I have turn off, by pressing the power button. I tried clearing history and hide, but to no avail.

  I am running OS X El Capitan worm. 10.11.4

  MacBook Pro (retina, 15 inches, mi 2014)

  2.5 GHz Intel Core i7

  16 GB 1600 MHz DDR3

  Intel Pro Iris 1536 MB

  Thanks in advance for any input.

  1 click  in the menu bar and select "force quit."

  Select Safari and click "exit of strength at the bottom of the window to Force Quit.

  Hold down the SHIFT key and launch Safari.

  2 Disable Extensions and test them.

  Safari > Preferences > Extensions

  Select Disable all extensions and test them.

  Enable the Extensions one by one and test.

  To uninstall any extension, select it and click the "Uninstall" button

  If this does not help, run EtreCheck and post the report here.

  http://etresoft.com/etrecheck

  Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.

  Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.

• Qosmio G30-195 - infrared receiver does not work after sleep

  Hi all!

  I have a problem on my laptop after Exchange of service of the motherboard.
  Once I booted Windows (Microsoft eHome transceiver) IR receiver works well in all programs, but when the system resumes from sleep mode, the IR receiver unloads from memory and can not find the search for material.

  If the remote control does not work until I have to restart Windows. Windows XP SP2 and Windows XP MCE behave the same. Before the exchange of motherboard I didn't you have a problem.

  What can I do with this?

  > What can I do with this?
  Contact service again and tell them the same thing. They need to know why this happen.

  By the way: you can use other USB devices connected after waking from sleep mode?