Some complex web sites like the Huffington Post does not load. Circle just keeps going in circles CW

Some complex web sites like Huffington Post dot com home page load slowly. When that finally they load and you attempt to open a tab, many refuse to load. Blue circle continues to go round and round in a clockwise direction. The box in the bottom left of the screen says "Waiting for ' or 'Read' or ' transfer of" and the name of another web site that apparently contributes to the page. But nothing is happening for several minutes. The more common a 'suspended upward", it is called pixel.quantserve.com. Several attempts to "Reload Tab" do not help. This problem is not present in Internet Explorer itself. Have run AVG anti-virus several times and no viruses have been detected.

Clear the Cache and Cookies

Clear the Cache of the network

Troubleshooting extensions and themes

Check and tell if its working.

Tags: Firefox

Similar Questions

  • My Web site in the firefox browser does not disply the tube you or facebook links/feeds, shows well in IE

    Sorry - I tried half a dozen times to load screenshots of the 'problem' nothing would charge, not a word with the screenshots, not png, not jpg doc and trying to load in fact crashed firefox at some point so - here's the problem, but no support for images...
    my site: www.pfment.com on the right on the top, one Panel has you tube, and then do a facebook feed, and the last, a place for you to subscribe to the ear. everything was fine - I don't know when they stopped showing (in the browser of ff) to be clear, the yt and fb parts appear not at all, and the ear to subscribe is on the top. If I select the view tab in IE, it is always a show, however, if I open the ie browser, chrome, etc., it shows correctly.
    I emptied the cache and cookies, no help.
    ideas? suggestions?
    Thank you!
    Cyd
    Hmm, just tried to make the adds automatically the troublehooting info but it does say no can do - on your side... problems will see if manual work.

    I FOUND - read more about the various articles on troubleshooting and started turning off what we at the same time, the wandering extension: ADBLOCK PLUS - I love this extension, it does a great job, of course, is just a tad too excellent! have to see what I have to do to "turn off" some of its features.
    Thanks a lot for helping me to understand what was wrong.

  • My problem is that when I try to save an image from Adobe Photoshop by using the 'save for Web' half of the dialog box does not appear.

    I use a Vista Home Premiuim Windows in an Acer Aspire One 10.1 "." My problem is that when I try to save an image from Adobe Photoshop by using the 'save for Web' half of the dialog box does not appear. Can someone help me please?

    Here is a screenshot of my problem...
    [IMG] http://i55.tinypic.com/of5w01.png [line]
    Help me please.

    Hello

    1. were you able to see the front dialog box?

    2. did you of recent changes to the computer?

    This happens because your screen resolution is less than the required minimum of 1024 x 768.

    You can try to change the resolution of the monitor and check.

    For more information, see the link:

    Change settings display on multiple monitors

    Change the screen resolution

    You can also refer to Adobe support links and also post your request in the Forum from Adobe for assistance:

    http://forums.Adobe.com/thread/433020?TSTART=0

    http://kb2.Adobe.com/CPS/403/kb403268.html

    http://forums.Adobe.com/community/Photoshop/photoshop_windows

    Hope this information is useful.

  • My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

    My screen goes black and the start menu does not load after start up logo and the only thing on the screen I see is my mouse pointer

    Hello

    You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
    Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
    on devices and UNINSTALL - REBOOT.

    Another method to try to get to the desktop (try in normal Windows Mode without failure)
    CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
    on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
    by tapping F8 as you start several times.

    First check this thread in case it is simple and if not to come back to this thread.

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

    Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
    That there is no information on a black screen as it is on a blue screen just adds to the
    Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
    Google to see the proposed repairs, whom some have worked however these cover a wide
    field efforts.

    Here's a video of one of them.

    http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

    Here's another fix
    http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

    You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
    manufacturer will sell them at low prices. Or try in safe mode if you can get there.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can create a recovery disc or use someone even version (to do the system restore there only to)
    being bootable).

    How to create a Vista recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ------------------------------------------------

    These require the correct Vista discs since you can not start safe mode.

    Try the Startup Repair tool-

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    -----------------------------------------------

    Here are a few Google searches where many have found different solutions:

    Vista black screen - check that a 1st
    http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

    Vista black screen Solution
    http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

    Vista black screen Fix
    http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

    -----------------------------------------------

    If necessary and you can access all ordinary Windows.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
    saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

    You can use another DVD that are not protected but you will need to copy you have the product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    If nothing works, you can make a repair facility that must save the data but you will need to
    Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
    need to know your product Code.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    ---------------------------------------------------------------------------

    Another method that works sometimes: at the command prompt, type of Vista startup disk:
    (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
    or "BOLD"
    )

    c:

    cd\

    CD c:\Windows\System32\winevt (there is a space between cd and C :)

    Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

    RESTART Windows

    I hope this helps.

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Content of the start page does not load in 11 IE or Chrome - RH11

    We went to RH11 specifically to solve the problem of known IE11 we had while we were running RH9.  When I installed the software, I applied all available patches, now at 11.0.2.240.  But when I try to generate a WebHelp project, in the output, the TOC loads, search bar charges, but the main content of the start page does not load.  Very similar to the old question of IE11.  It happens on both files the to this virtual machine and when they are responsible for the intenet.  My operating system in Windows 7 (as so far).

    Someone at - it suggestions?

    Ah ha.

    Worked well with an example project.

    Took a look at my files... the start page is a legacy file that has been through several versions of RoboHelp, at one point he somehow must have obtained some of the javascript HR calls in there - took the javascript code for the file, rebuilt and everything works again.

  • On the computer, it does not load XP but goes to the XP start and says: NVRD32.sys file not found

    On start-up the computer, it does not load XP but goes to starting XP, and says NVRD32.sys file not found. I have to go up to xp home line manually and it load. How to fix the problem, so he starts xp automatically without entering start xp
    Thank you

    Posing for the PC model, you show that you do not know the answer, it was a software problem, but you're right, it's a Dell.
    In any case, I found the answer elsewhere, must with the boot.ini file on XP

  • The payment method does not load

    I am buying Flash Pro and the payment method does not load. I try to get the single App membership. I waited for 2 hours, nothing happens.

    I'm sorry you're having trouble to purchase. For assistance, please contact sales:

    http://www.Adobe.com/about-Adobe/contact.html

  • The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

    The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

    This solved the problem for me:

    Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

  • After setting up standard accounts, a few Web sites that should be OK does not completely load on Vista

    I put in place of the standard accounts for my kids to block/monitor, etc.  It blocks certain pages, but the other pages that are OK, the entire page (photos, etc.) does not load.

    * original title - I put in place of the standard accounts for my kids to block/monitor, etc.  It blocks certain pages, but the other pages that are OK, the entire page (pictures, etc.) not no charge.*

    Hi Gary_2525,

    Please tell us what Web browser you are currently using.

    Also, is there a content especially on the Web site that does not charge?  For example, flash player?

    If you use Internet Explorer, see the following article for some possible troubleshooting:

    http://support.Microsoft.com/kb/967897

    I hope this helps!

  • Vista recognizes the printer but does not load the drivers - error 0x000003eb

    Have even tried to load drivers generic, just to see if it works, no chance.  I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.

    Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.

    Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue).  I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista.  Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.

    I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us.  It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me.  You really need to discuss this with HP and I don't know that they will have you place and operate at any time.  I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation).  If you do the research and read relevant articles, I am sure that you can do.  No, Vista makes it as easy as XP, but it can still be done.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • flow of the home page does not load

    At the start of Skype does not load the home page stream, everything works fine but right of my contacts list is just a blue cirle which is quite annoying to see all the time rotating page loading. Home page fodder used to work properly, I tried to uninstall and re install, but nothing is, everyone has ideas how to cure this?

    Try to uninstall the currently installed version and install the 6.1.0.129 old version using this msi installer:

    http://download.Skype.com/MSI/SkypeSetup_6.1.0.129.msi

    After installing this version, be sure to turn off the automatic updates:

    Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

  • Why is the link "Firefox cannot load Web sites but other programs can" does not? "

    This link seems broken.

    Works fine for me: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can

    What do you get when you try?

    If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

    Not related to your question, but...

    You must update some plug-ins:

  • Why the Web site in a browser preview does not match pages of Muse?

    Hello

    I'm a new user in Muse, so please forgive me for this rookie question. When I create pages in Muse, everything seems as it should. But when I saw the site in the browser, the page is very long with lots of empty space at the bottom of the page. I'm not sure what I'm doing wrong. When I started the new site, I kept the default page settings. Any help would be greatly appreciated. Thank you!!

    MusePageCorrect.pngPreviewBrowser.png

    Try switching between the Sticky Footer option in the properties of the Site/Page. Read more about it here - http://www.adobekb.com/creating_mobile_layouts_pt03.html#additional

    Thank you

    Vinayak

  • Why is that now, when I click on a link for a Web site I have saved, it does NOT show the URL in the address bar? I don't and then drag it to an email to share the link.

    How is it that, in these new versions of Firefox (I have 21.0), when I opened a link that I recorded, it does NOT display the URL in the bar of addresses?

    I can't drag and drop the link in an email, and I don't see the actual address that I'm connected to for reference OR for security reasons. Why is - this has changed?

    It becomes necessary to reveal the properties of the URL link that I saved, by using the 'Properties' window, then copy and paste the URL in the address bar of Firefox, until I can do something with it.

    I had the same problem. Looked at all the addons and extensions referred to in the conversation between philipp and dadmr. All extensions and plugins off and on again with each shot. Problem has been resolved by disabling app 1.0.85 Goodshop and RealDownloader 1.3.2.28. It may be that these versions were outdated, but were postponed during the upgrade from previous versions of Firefox. I hope this helps.

  • Web sites that contain video clips do not load properly,

    Web sites that contain video clips load not properly, the space where the video should be empty. Also on facebook if you click on a thumbnail of a video which has been posted it disappears just and does not play.

    A simple solution that worked for me was to do a restore of the system when the system was working. This gives you a working flash player... Then don't update flash player, but you can update firefox.

Maybe you are looking for

  • Can I disable the Tcrdmain.exe in msconfig - Toshiba Flash cards

    I do not use the Toshiba Flash cards - I find them just a nuisance, so I kept of appearing them at the top of the screen. However, I note + + tcrdmain.exe is still running and eating memory. Is it safe to disable in msconfig? (I'm under Vista Busines

  • Satellite M40X-112: WLAN not working not

    Hello I got a M40X-112 and had some problems recently with my wifi connection. The router works (tested with other customers) and the regular LAN on laptop computer makes it work. But 2 weeks ago I wanted to access the internet and it stoped working.

  • Error codes: A 80071, 91 & 643 (cannot install updates)

    I had this problem for about a month.

  • 2010 HP Monitor: display screen HP 2010 problem

    Last night, I installed upgrading Windows 10 and everything was going well. When I turned on today, the monitor went berserk! The desktop icons are much larger than they were and seem to be crushed. I tried to change the resolution of the screen, but

  • Determine if the user is connected to Wifi or not...

    I am trying to create a form that will send me through my application, however, I only want to show if the user is connected to the wifi... That's what I have right now. This is my XML: Test bbthemelab bbthemelab false Thus, applications works slight