Some Microsoft Windows Update cannot be installed - Satellite A200-W00

Hello

I had a problem with updates on my Toshiba Satellite A200-W00 Machine. I have two specific updates that fail permanently.
I have been in contact with Microsoft staff who sent me troubleshooting step by step to try, but I had no chance. These updates are:

* Cumulative Security Update for Internet Explorer 7 in Windows Vista (KB956390) *.

* Update for Media Center for Windows Vista (KB955519) *.

* Update for Windows Vista (KB953155) *.

It was one of his emails

The problem description, I understand that several updates could not be installed and you have tried a few troubleshooting suggestions, but the problem persists. If there was any misunderstanding, let me know.

Faced with this situation, the problem may occur if the system files are corrupted. To continue troubleshooting, please first temporarily uninstall security programs and test the update again. If still no, please, take your time and try the following steps to fix the system.

On-site upgrade
==========
Although this operation will not remove or modify the files and installed programs, I suggest always that we back up important files before you do. In addition, we may have to reinstall the device drivers after this operation. Thank you for your understanding.

1 start the computer and access to Windows Vista.
2. Insert the Windows Vista DVD in the DVD drive of the computer.
3. use one of the following procedures, as applicable:
If Windows automatically detects the DVD, the now Setup screen. Click on install now.
If Windows does not automatically detect the DVD, follow these steps:
a. Click Start, click Run, type Drive: \setup.exe then click OK.
Note: The drive is the drive letter of the computer's DVD.
b. click on install now.
4. When you reach the type of installation you want screen, click upgrade to upgrade the Windows Vista system files.
Once finished, try to update again.
Please, try the above steps and let me know the results soon. If there are any questions or concerns, do not hesitate to contact me.

I look forward to your reply.

Best regards

Bill

However, Vista was preinstalled on my laptop and obviously I don't have the disk. Anyone knows where I can get hold of it or have the same problem with the similar updates. I tried to disable my antivirus, firewall, antispyware drive controls, clean ups etc and nothing.

Any help would be appreciated.

Thank you

Advertisement

Hello

You didn t receive a Toshiba Recovery disk?
Then maybe your laptop was equipped with HARD drive recovery option?
Please see your manual how to start the recovery procedure.

According to your announcement of some system files are damaged and it may be necessary to reinstall the entire operating system.

Welcome them

Tags: Toshiba

Similar Questions

  • Virtual PC installation fails with "Windows Update cannot be installed because of the error 2149842967"

    I have two laptops Lenovo X 201.  An installed Virtual PC/Win XP fine mode, the other gives the following when installing Virtual PC update. ;     (I made the hardware, virtualization and the Windows XP mode prereqs)

    (1) throws a dialog box titled saying "stand-alone installation of Windows Update": "update is not applicable to your computer."

    (2) in the event viewer, you see this message:

    Windows Update could not be installed due to the error 2149842967 "' (command line:""C:\Windows\system32\wusa.exe" "D:\Downloads\Windows6.1-KB958559-x64-RefreshPkg.msu" ")

    (3) check in the registry for the following paths is identical between the two computers and recommended values

    HKEY_USERS\. DEFAULT\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

    (4) emptied the folder "C:\Users\user\AppData\Local\Temp".

    (5) I do not receive the following symptoms

    (a) the low 'Register of space' error, sets the size of "unlimited" registry: so no need to change the registry setting

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    Key: RegistrySizeLimit

    Other thoughts?   What does error code 2149842967 mean?

    Thank you

    Hello

    Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated. Feel free to post your request here on the Forums of Windows, we would be happy to help you.

    Thank you.

  • Windows update error 80072efd on Satellite A200

    Hello

    Doesn t work on my Satellite A200 Windows Update. When I try to search for new updates, after ten minutes is displayed error 80072efd. Of course, I ve done all proposed solutions, but no result. OS is Vista Home Premium and it has that Norton Internet Security is installed as a firewall.

    I tried starting windows update when Norton firewall has been turned off, but the result was the same error 80072efd.

    Anyone know what I can do more?
    Concerning
    Piter

    Hello

    Have you already checked this article http://support.microsoft.com/kb/836941?

  • Windows Update error 80072EFE on Satellite A200

    Well I'm going to update the window option

    This error comes from what means this error

    error 80072EFE

    my notebook is SATELLITE A200

  • Windows updates cannot be installed error 80246001

    I have automatic installation of the new updates. Updates could not be installed due to error80246001.
    All the safety devices are on. Please can I have these urgent updates installed. Thank you

    Hello

    You are trying to install updates?

    Follow the steps in the link below and check if it solves the problem.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/correction-for-error-code-80246001/079c8abe-03e6-4d38-80c9-8f3af704cd2e

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • Cannot install message of updates that Windows Update cannot currently check the updates because the service is not running

    Original title: update Windows impossible currently to check updates because the service doesn't work (Vista 64)

    I get the message: ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "I rebooted without change.

    I have Vista 64-bit with installed MSE and it cannot update its virus database.  I have also Windows Media Center put up a TV and may not be able to download an updated Guide.

    Can someone help me please?  I just finished a full scan of Malwarebytes and a full scan of MSE - both in Mode safe mode with networking.

    I found a few other forums similar to my problem, but I don't know that they are the same as mine.  I'm a little wary about some of the suggested corrections, so I thought I would like to get suggestions directly related to my problem.

    Thank you!

    Hello

    1. what exactly happens when you try to download the update for Windows Media Center guide? Do you get any error messages?

    2 did you do changes on the computer before the show?

    Method 1: Run the update utility

    See the following site:

    Problems with installing updates

    http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-with-installing-updates.

    Method 2: Start services

    Make sure that the following services are started:

    a. Windows Update

    b. Background Intelligent Transfer Service

    c. Cryptographic Services

    To do:

    a. click Start, type services.mscwithout the quotes and press enter.
    b. double-click the service and under Service status click Start, if it is not started.

    Method 3: Reset the update components

    See the following site:

    How to reset the Windows Update components?

    http://support.microsoft.com/kb/971058.

    Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry .

    Method 4: Run the fixit

    See the following site:

    The problem with Microsoft Windows Update is not working

    http://support.microsoft.com/mats/windows_update/.

  • updates cannot be installed error code 80070002, windows has encountered an unknown error, on my pc with windows vista basic.

    updates cannot be installed onmy pc even after I tried to remove the temperory updates and also followed all the suggestion that is available in the help and support window.

    Hello, pramodec

    Please use the Forum for answers!

    Try running the Fix It tool on the link below and let us know the results: http://support.microsoft.com/kb/971058

    We can't wait to hear back on your part.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot install windows update, error: Windows Update cannot currently check the updates, because the service is not running

    Original title: Impossible to update Windows 7 on Netbook

    I have a Samsung Netbook running Windows 7, but can not run Windows Update

    Each ime that I try to run the update, I get the following message.

    Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

    Hello

     
    Follow the steps from the links below and check if the problem persists.
     
    Method 1: Run the Troubleshooting Utility from the link below and check if it helps.
    Problems with installing updates
     
    Method 2: Run the FIXIT in the below mentioned link and check if it helps.
    How to get the latest version of the Windows Update Agent to help manage updates on a computer?
     
    Hope this information helps.
  • Windows Update cannot install KB2656353

    Windows Update cannot install KB2656353 on my Windows XP Professional SP 3 machine.  I tried to update windows install to 4.5 & manually install the update, but the installation stops when someone asks me for the Microsoft .net Framework 1 (disc 1).  How to solve this problem?  Thank you.

    Hello

    ·         Did you do changes on the computer before the show?

    ·         What is the full error message?

    Follow the steps.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article to reset the Windows Update components.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

  • Service pack guard repeatedly offered on windows update, cannot install Service pack 2 and Internet explorer 9

    Original title: the Service Pack is installed a number of times.

    There are already five heads of the installation. He keeps on reappearing as an update of Windows Vista! What kind of error is it? It TI a malware? I can't install antivirus from other anti - virus vendors products. In this case I can not install Service pack 2 and internet Explorer 9, too. Please allows us to make a way to solve this problem.

    Hello


    1. is the Service pack 1 is already installed on your computer?
    2. what version of service pack offers you to install?
    3. do you get an error message?
    4 are. which antivirus products you referring?
    5. have you made changes on the computer before this problem?
    Method 1:
    You can run the fix - it from the following link.
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/
    Method 2:
    You can perform a clean boot, and then try to install the updates. Read the following article.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

    Method 3:
    Reset Windows update components, and then check if it helps.
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
    Method 4:
    You can try the procedure described in the supplied knowledge base article and check.
    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    http://support.Microsoft.com/kb/2509997
    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
    Warning of CHKDSK
    Important
    : when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
    Note: make sure that you back up the data before proceeding with the disk check.
    See also:

    Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
    http://support.Microsoft.com/kb/906602
  • Windows Update cannot install Office SP2 and KB973924; codes error 78(f) and 643

    Hello

    I'm currently under Windows 7 64 bit which has been updated to XP in January this year.

    Since July, Windows 7 update tried to install following updates without success:

    1) the 2007 Microsoft Office Suite Service Pack 2 (SP1/SP2) - error code generated 78(f)

    (2) security Update for Microsoft Visual C++ 2008 Redistributable Package (KB973924) - 643 generated error code

    Windows Update tried to install these several times but without success.

    Also, I tried to install iTunes and get the following error:

    "An error occurred during the installation of assembly"Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32", processorArchitecture, publickeyToken = "1fc8b3b9a1e18e3b" is"x 86".  See Help and Support for more information.  HRESULT: 0 X 80070002. »

    I tried many internet research to try and find a solution to these problems but have had no success.  I tried the following:

    (1) re-intsalled .net framework 4

    (2) run the System File Checker that could not so I tried my windows disk, but it could not start because the message says that two updates were waiting to be installed

    Now, I'm really worried that I have a big problem with Windows.

    Well, any help that you can give to avoid reinstalling my system would be appreiated.

    Thank you very much

    Thanks for your help Irfan H and PA bear but unfortunately none of the above suggestions has solved my problem and I couldn't find another solution on the internet that worked.

    Finally, I had to do a clean install of my system using an image of my hard drive that I created during my first installation of windows 7.  Now, everything seems to work properly and installing updates without problems.

    Thanks again.

  • some Windows updates do not install on Windows vista.

    Original title: update failure

    I am running Windows Vista Ultimate on a Dell Vostro laptop.

    Recently I received notice of update of the computer (where the sleep button turns red with the shield of Microsoft - so that when you click on it begins to install the updates before you shut down). However, the first question, I noticed was the extraordinary length of time it took to 'install' updates... more than 8 hours, in many cases, this can be problematic because he inisists that you do not feed disabled or stopped during the process.

    Despite the long waiting to install the updates that several "important" updates several times not to settle, which inevitably means that the next day that the computeer said that it has developed important to install...

    Updates is fails to install.
    KB2443685
    KB970430
    972145 KB
    KB967723
    KN2345886

    Can someone help me?

    Hello
     
    1 did you changes to the computer before the show?
    2. it give you any error message?
     
     
    Method 1:
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/

    Method 2: Windows Update or Microsoft Update repeatedly offers the same update

    http://support.Microsoft.com/kb/910339

    Method 3:

    SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

    Scan sfc enforcement procedure:
    a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
    b. click on continue or provide administrator credentials if prompted.
    c. in the type in the following command prompt window and press ENTER:
    sfc/scannow

    Refer to this article for more information:
    http://support.Microsoft.com/kb/929833

    Method 4:

    Put the computer in a clean boot state, download and install the updates and see if that helps.

    Download here:
    http://www.Microsoft.com/download/en/default.aspx

    Clean boot: here is the link:

    Here is the link:
    http://support.Microsoft.com/kb/929135

    Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

  • Optional features of Windows cannot be enabled or disabled, hidden Windows updates cannot be uninstalled

    (!) Refer to this post: Windows Media Player enabled at startup interferes with sound, video, and other sources

    Obviously the Vista Home Basic SP-2 (optional) Windows features is more damaged than expected? None of these options has tried several times using different techniques can be enabled or disabled. I also had similar problems with uninstall some windows (and hidden) updates so I can reinstall them (including Service Pack 2: Windows6. 0-KB948465 - X 86) and 'can' be related.

    After the attempt to turn an optional feature on or off (to speed up Vista, is not necessary, or is necessary), in this case: "an error has occurred, not all features have been changed successfully." And it takes an unusually long time before it fails too? If I try to uninstall a Windows or hidden, in this case update: "an error has occurred. Not all updates have been correctly uninstalled"; but others were like "Silverlight" etc. If I try to reinstall Vista 5 languages SP-2 KB948465 Installer, I get: "the requested operation failed. A system restart is needed to roll back changes"ERROR_FAIL_REBOOT_REQUIRED (80070bc9).

    Even Windows updates failed to install Powershell 2.0, WinMF 2.0, and BITS 4.0 (read the post via the link above for more information). And if I do various attempts to troubleshoot and resolve these issues (and so on), the Blue error screen occurs finally.

    Other misc registry errors found; but were obsolete or left behind from the previous uninstall (not critical). Even in SafeMode with networking, all bet three errors have occurred (with startups and the services that are disabled; Microsoft services were 'hidden').

    The link in the installation of Service Pack 2 window (for more information on this specific error) goes to a Microsoft Support web page that explains this problem exactly as regards to SP - 2 mainly; Article: http://support.microsoft.com/kb/947366. But none of the solutions work or are applicable, since the system restore could not go back enough and I have not a Vista Home Basic CD (it is a second hand laptop that I will eventually replace it with another that has Windows 7, etc.). More Vista Service Pack 1 is already 'not supported' and SP-2 will soon follow. There is therefore no need to buy a CD to launch the "startup repair tool" (via another case).

    * Ironically the laptop works well overall, but some programs such as TVCenter6 are not able to function normally (DirectX. Net3 etc work fine) and require some resources that do not work due to the above problems. I can get on the internet using Internet Explorer 9 very well also (although Silverlight and Powershell etc. are required for certain functions to display or work).

    Please advise, Chris.

    Updated, I have invested in PC Health Advisor to 'fix' the registry problems; I was not able to manually set Windows features, specifically. When the computer reboots, I ran Windows Update and it worked again! Such that it auto-updated dot- Net Frame 3.5 Service Pack 1 (made in first), Powershell 2, WinRM 2.0, and BITS 4.0 etc.. I was so happy that I reinstalled Silverlight to Explore maps of Bing etc and tried again the functionality of Windows; no avail.? And he discovered damaged the account administrator; including commissioning elements "right-click" menu etc. (reinstall Vista SP2 manually failed too; almost from the beginning).

    To restore, I implemented a new admin account, renamed the one damaged, disconnected, connected to the new one, tested and deleted the renamed account; It worked! To retry the Windows features, the Admin account was again damaged. so I repeated these steps to restore Vista and had to address admin custom etc all over again just through (what is called "Aero" is enabled, but did not prevent the performance. Aero does not officially come with Vista Home Basic but gets 'active' to upgrade to Internet Explorer 9!).

    But in no way does this solve the problem base with features of Windows? I am amazed at how fast and responsive H.B. Vista Service Pack 2 is overall using less system resources; Despite this heart problem? And took a snapshot of what Windows Update installed completely. Fixed given by the support of third parties as a result of PC Health Advisor of the PC maintenance utilities (made by ParetoLogic I recommend instead if this ), has no also. And was not different from what I had already exhausted; stretching on the days. What I can possibly be "gone" which is at the root of the problem "of the Windows features" (as an option)?

    Update: I restarted PC Health Advisor several times: found and fixed more various defects of registry; found five obsolescent hardware device drivers (downloaded and installed updates for modem integrated, Realtek sound, "Value Added package" mass USB, Atheros wireless (WiFi); due storage manually remove the registry key for Toshiba VAP not in Control Panel?; restarted the laptop, did the account Admin is again ruined?) (in the same way; but not "Windows features" this time) And has been replaced with 'test' admin account for now. Revived the PCHA once again, found several flaws of registry; restarted; revived the PCHA (lack of only 1 minor registry this time and fixed), everything tested OK. Hard drive defragmented PCHA, put in place a third replacement admin account while remaining connected to test admin (deactivation and reactivation recent items starting reset not his "right click" menu). Running of new PCHA carefully before logging in a third new account Admin (health high, not mistakes; was then low mid level), connected off test, connected to the third replacement Admin account; realized that Windows Process Activation Service is not included in Vista Home Basic (SP-2). Windows Installer module did not work and can not be started; then I opened the Manager of tasks in administrator mode and managed to do the work. I downloaded the Vista CD torrent; but it requires a blank CD for this (and so on).

    Nothing has worked? The only solution found online so far is to reinstall Vista Home Basic Service Pack 2 edition, which is not possible (for the reasons). There must be a way to run a downloadable and OS utility repair record; When I discovered Reimage (point com) I peut buy as a last resort. If it does not reach the root of the problem and fix it, or if the Microsoft technical support cannot? I have no recourse but to buy another laptop (with OEM Windows 7 preinstalled; which is cheaper on this Toshiba Satellite A135-S2276 level).

    If I find anything else I will update this post (still pending from Microsoft to answer this question and other positions).

    Here are the latest steps taken to solve this problem that many there have also, as follows:

    (!) If you want to try this yourself, omit all deletes registry keys tried except «VistaSP2...» (for a total of 5 to 7 keys).

    (*) I kept those strictly for FYI purposes, while one who is also having this problem may avoid in go through what I had.

    (*) If I had known 'VistaSP2-... (KB948465) "is the correct name for the key (s) Service Pack 2, I could avoid all others.

    A ran the other (3rd party) utilities and other tasks, admin account is damaged is no longer; but root question remains?

    Tried to install standalone 5 new SP-2 languages. but not with the same "error in registry" repeatedly?

    Removed 50 updates beginning with the top of the list of MSW that Vista is back (all), because of the error in config.

    About 9 keys starting at the bottom this time and worked until I got to this key, that I could not remove the abduction:

    Update for Windows KB949939 did not have an uninstall option and may not be removed in high regedit.

    Changed permisions them key to 'force' a delete (changed owner, granted full control to the 'administrators').

    Removed other keys at the bottom of the install MSW list but standalone SP2 has not yet (in the same way).

    Found another potentially corrupt key with no. Uninstall KB938371. a 100 + instances of it and were withdrawn.

    Find more cases of this key (/ multilingual country) and changed "permissions" to remove all.

    A ran a search of all keys to make sure that all were completely removed from all categories; in the record high.

    Continued with the uninstallation of updates of DSM of the last upward; revived after all the few (which prompted the it).

    But still, the standalone Vista SP2 installer has failed in exactly in the same way? (following the removal of updates).

    Found and removed three updates DSM more with no uninstall option: KB937287, KB955430, Windows Search (4.0).

    The second key was part of the first? Removed a little past these, restarted, SP-2 (run as Admin) has always failed.

    High Ran regedit in mode 'permissions' to delete the keys to potential RETICLE; Search 4 uninstall appears!

    Deleted 4 research and restarted Installer but SP - 2 has not yet? Uninstalled four updates more in the list.

    The following entry is Service Pack for Microsoft Windows (KB948465), but he is damaged and cannot be uninstalled?

    This must be the problem, given that some of the deleted key had to do with "iCBS; has run high regedit.

    Used exactly the same procedure to manually remove the keys to Vista SP2 with care; but there were too many entries!

    Revisiting previous research, I realized that these keys starting with "VistaSP2 -" can be deleted. It worked!

    Service Pack for Microsoft Windows (KB948465) was finally removed from the list of updates installed after discount!

    Removal of two more MSw update to make sure it not more corrupt Scriptures; the Service Pack 2 Setup program has gotten away.

    But it suddenly abandoned shortly after the file copy process has started with the same error of registry; restarted.

    It worked! Everything was great when a system error suddenly interrupted the installation but 0x80070bc9 error has disappeared!

    The Setup dialog window prompted "0x800f081f' with more information on the Microsoft web site.

    Again running the preparation tool for the system Vista (Home Basic SP-2) update to fix "missing component CBS.

    Run the Vista SP2 installation program again, process installs other Microsoft Updates; but everything stops in the same middle point?

    Reran the tool again, rebooted, re-run Setup of Service Pack 2, same event occurs: error system 0x800f081f.

    CheckSUR log file lists 10 (f) CBS Watchlist missing package and 441 (f) CSI lack of deployment total key.

    According to the research done on this error, the only 'solution' again is to reinstall Vista Home Basic SP - 2 ed?

    And the two service items Microsoft Office Service Pack 2 Setup, I had already tried with the initial error.

    The irony is that the laptop works better than ever, but specific programs such as TVCenter6 will not work?

    Made of in-depth research on the error "0x800f081f" etc. (occurs with SP1 install also FYI); run the tool again.

    Remains found components for Vista SP1 not in the list of updates installed therefore some errors checkDUR.

    Used the same technique above to remove "VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000; iCBS but left.

    Again running PC Health Advisor, this time in high fashion, analyzed twice, found 14 registry errors and fix them.

    Who finally authorized the second error to install SP - 2. ("0x800f081f"); but still, Vista SP-2 does not go to reinstall?

    A run PC Health Advisor; found No registry errors either. If the Admin account is stilldamaged .

    I'll keep this account as it is until what I hope to be the final solution be found; and implement a new Admin then.

    Curiously, now it almost immediately invites "SP1 must be installed first" and is a sine qua non for SP - 2.

    As with Service Pack 2, SP 5 languages-1 has been downloaded; SP - x causes complete multilingual features to win at "overpoll".

    Service Pack 1 abandoned installation (already installed); ran high regedit and delete all sets of keys KB936330 (about 50).

    SP - 1 still wouldn't reinstall; used high regedit to remove the many KB936330 key sets and subs as possible.

    But Vista SP - x abandoned always with the same alert. only to discover 'integrated Service Pack 1 cannot be uninstalled?'

    Never after deletion so mamy keys manually, SP-2 (and SP1) was still as installed; in the box of Winver.

    After keys deleting both remaining SP - x, I realized it was unnecessary; and others deleted inadvertently.

    All this could not uninstall Vista Service Pack 2 (SP-1) to be (re-) installed to fix the underlying problem.

    After reviewing tried everything so far to see what can be done; I ran the uninstall of the elevated command line.

    But the result is the same; the prompt returned in a few minutes, but SP - x via GUI can take more than an hour?

    Conclusion: after finally getting the method calls BACK to (re) - install Service Pack 1 to work, it failed at the end!

    "Mode and on the process in an automated"undo"install", records were destroyed during the restart.

    Apparently, this version of Vista Home Basic was integrated (installable)? SP-1 and requires the CD (OS)!

    If I had known this all along, I would have improved (at least) to Ultimate. Which is exactly what the person I gave

    the laptop used far have done without any problem (less a video cable that fell off under the keyboard).

    How Microsoft can come up with such a version (SP - x) for (laptops), this are not equipped with CD?

    Because without it, there is no way to fix problems like this an 'off' (via Windows Upgrade also) internet.

    This case is classified as insoluble with regard to the original question.

    Hello

    wrong forum

    It comes to the installation of vista operating system instance

    try to repair:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

    or windows update:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • Windows Update is not installed

    I am using automatic updates.  Update: "A security update for SQL Server Reporting Services 2000 Service Pack 2 (KB970899)" will not be installed.  I click on "Quick Installation" it tries to install it, and then after a minute or two, it is said that the update was not installed.

    Windows XP SP3, btw...

    I see that it is in the Vista forum...  I was CERTAINLY in the XP forum when I made this question.

    YOUR WEBSITES IS THE WORST, MICROSOFT!

    Hi matthew_TheSocratesGroup,

    You receive an error message while trying to perform the update?

    Click on the link below and see if it helps.

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

    How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

    http://support.Microsoft.com/kb/906602

    You cannot install updates that you download from the Windows Update Web site on a Windows XP-based computer

    http://support.Microsoft.com/kb/934648/

    You can also try these steps below.

    Reset Windows Update components.

    Click on the Fix Me to reset to be done immediately.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/KB971058

    Once the Windows Update components are reset, try to reinstall updates. To do so,

    1. open Windows Update by clicking Start , all programsand then click Windows Update.

    2. click on the option to change the settings in the left navigation bar. You will now be on a screen where you will be able to set up how Windows Vista download and install updates on your computer.

    3. Select updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

    4. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

    5. you can then download the updates one or both.

    6. click on install updates to install the updates that are currently selected.

    7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

    For more information about installing the windows updates, see

    Install Windows updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

    Hope this information helps.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think

  • Update cannot be installed

    When I tried to update my Vista, he stopped on the installation path, says error 80070492, some or all the update cannot be installed." I checked the history of updates, I found almost all the update have been "failed." I don't know what to do. I use Vista SP2)

    oshimachairo,

    0 X 80070490 - ERROR_NOT_FOUND

    Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

    Ignore the title: Some Windows Vista functions may not work, or Windows Vista may stop responding

    http://support.Microsoft.com/kb/929833

    A repair install is that the usual of SFC/scannow solution does not work.

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

    http://support.Microsoft.com/kb/958044

Maybe you are looking for


HashFlare