Some problems of OS on Mac Pro 2014 mi

Similar Questions

• Mac pro (2014) battery is not charging

  I met a problem for battery does not charge when one day when I opened the Mac Pro 13 "(mid of 2014)."  So I called Apple support for like reset the SMC, another MagSafe adapter, it seems still couldn't work.  I checked the battery information that seems good, but still was not able to load. Any help/input would be greatly appreciated.

  (1) connect the adapter when the Mac pro will turn on automatically;

  (2) where plug on the adapter, the Mac Pro turns off.

  (3) using the "Option-battery icon" show "Condition: Normal ';

  (4) information below looks like battery is ok, but could not load:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Battery information:

  Firmware version: 702

  Review of material: 000D

  Review of cells: 379

  Information on this charge:

  Charge remaining (mAh): 3043

  Fully charged: No.

  Loading: No.

  Full Charge capacity (mAh): 6067

  Health information:

  Number of cycles: 140

  Condition: Normal

  Battery: Yes

  Amperage (mA): 0

  Voltage (mV): 11540

  Charger AC/DC Information:

  Connected: Yes

  ID: 0 X 0921

  Wattage (W): 60

  Family: 0 x 0085

  Loading: No.

  Please take the computer to the Apple store to have the computer checked.

  The Genius Bar reservation:

  http://www.Apple.com/retail/Geniusbar/

  Best.

• screen of Mac pro 2014 remains black when power up

  MacPro 15.4/2.2ghz/16gb/256gb 2014 flash power off all good last night.  Am it powers up but the screen remains black.  Apple on the cover of the lit even when closed.  Start button / stop it but same result when this back to the top.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the Interior

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Mac Pro 2014 Retina screen shows lightning under empty battery but won't turn on

  Screen shows lightning under empty battery, but won't turn on. I had plugged it with two adapters to support different (long and short) that accompanies the retina macbook 17 inches. Ive left plugged in for 24 hours and still will not light. I have tried reseting everything I saw on the forum other messages such as pressing shift-control-alt-power - release and then pressing button works / stop and nothing. Sometimes just showing the Red/low battery with Flash below the middle of the screen, but it will not activate. I have all my work on this computer and need to have on it.

  The green light on the magnetic charge cable is not, however, this has only worked from time to time and then for a while so I was not worried about it. Any advice?

  You have to go to an Apple Store or an authorized Service provider. The fact and take up virtually even with different Chargers, the indicator light on the MagSafe does not light up and the display on the screen of the cries of hardware problems. And these sealed Macs really are repairable no-no.

• Mac Pro 2013 randomly restart problem

  Hello

  Here's my problem: I have a Mac Pro end of 2013 (6 cores, 16 GB ram, over-pants D500, running OS X 10.10.5 with a WACOM Cintiq 21 - UX as my view only) who has, for the last month or so been randomly restart itself.

  There are some days where it might be three or four times and then days where it won't do it at all. Also there are moments where it works well for hours, but then if I turned off the Mac Pro, it will crash and restart. Sometimes it will freeze momentarily application-wise (but the cursor moves but does nothing) before it restarts but usually just the screen goes black and then it restarts without any warning. I still get the black screen with the «your computer has restarted...» Press any key' and of course, it generates a crash report that I submit to Apple every time (that I'll post more recent one below as well.) I did start secure upward, reset the PRAM, booted single-user, just that I found online to do which is recommended. But nothing seems to have done something to help.

  The Cintiq is connected through a DVI adapter to Thunderbolt. I also have Mercury Elite Dual Pro Rack hung RAID normally via Thunderbolt. There are times when I think that there is a problem with the RAID box and the Mac Pro but not sure. As there is a problem with the Thundebolt ports. I tried to pass the cables autour, but it has not seemed to have made all the difference. This also has all seems to have coincided with the last update of OS X where I've also updated the driver for WACOM Cintiq (I since past to the old driver). Is this all just a matter of software conflict?

  I found an Apple Support thread where someone has indicated that a Kernel Panic may cause this, but then it also seems similar to what I've found, that was the issue with the Macbook Pro, which had problems with graphics a bit backward.

  In any case, here's a crash report if it helps and thank you for any help that anyone can send my way!

  Thu Aug 18 02:40:39 2016

  Panic report *.

  panic (cpu 0 0xffffff7f918c0b32 appellant): "ACPI \"PWRD\ "with zero power failure: < rdar://problem/15746463 > ' @/ SourceCache/AppleGraphicsControl/AppleGraphicsContr ol-3.10.25/src/AppleMGPUPowerControl/kext/AMPCPowerManagement.cpp:512»»»

  Backtrace (CPU 0), frame: return address

  0xffffff81fe9dbda0: 0xffffff800f52ae01

  0xffffff81fe9dbe20: 0xffffff7f918c0b32

  0xffffff81fe9dbe70: 0xffffff7f918c0020

  0xffffff81fe9dbec0: 0xffffff7f918be7ad

  0xffffff81fe9dbf10: 0xffffff7f918bed14

  0xffffff81fe9dbf40: 0xffffff800fad394d

  0xffffff81fe9dbf80: 0xffffff800fad3b48

  0xffffff81fe9dbfb0: 0xffffff800f611867

  Extensions of core in backtrace:

  com.apple.driver.AppleMGPUPowerControl (3.10.25) [90 B 87953-018 b - 32E9 - AD83-0526D8E C4749]@0xffffff7f918b8000-> 0xffffff7f918c4fff]

  dependency: com.apple.driver.AppleBacklightExpert (1.1.0) [65E3187E - B-36E9-bi33-1B13ABB058 949, 1A]@0xffffff7f918b0000

  dependency: com.apple.iokit.IOPCIFamily (2.9) [CA598036-E22A-3AAE-ABB0-9407B560C5C1] @ 7f8fd24000 0xffffff

  dependency: com.apple.driver.AppleGraphicsControl (3.10.25) [3DC2F93F-5197 - 3B 16-8975 - 0142E7A0 474B]@0xffffff7f918b5000

  dependency: com.apple.iokit.IOACPIFamily (1.4) [70E2B65E-A91A-3522-A1A0-79FD63EABB4C] @0xfffff f7f905d0000

  dependency: ffff7f906b2000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [7372D580-6DDE-3457-B043-49B8447FC9D2]

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f8fdfe000

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  14F1909

  Kernel version:

  14.5.0 Darwin kernel version: Thu Jun 16 19:58:21 PDT 2016; root:XNU-2782.50.4~1/RELEASE_X86_64

  Kernel UUID: D11F499F-5895-3D58-9101-5671A93D526D

  Slide kernel: 0x000000000f200000

  Text of core base: 0xffffff800f400000

  Text __HIB base: 0xffffff800f300000

  Name of system model: MacPro6, 1 (Mac-F60DEB81FF30ACF6)

  Availability of the system in nanoseconds: 9763446529233

  last load kext to 4247477026004: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7f928a8000 size 20480)

  Finally unloaded kext to 4307635021147: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7f928a8000, size 16384)

  kexts responsible:

  com.kairos.driver.DuetDisplay 1

  com.apple.driver.AppleRAID 4.0.6

  com Apple.filesystems.autofs 3.0

  com.apple.iokit.SCSITaskUserClient 3.7.5

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AGPM 110.19.6

  com.apple.driver.ApplePlatformEnabler 2.2.0d4

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

  com.apple.driver.AppleHDA 272.18.3

  com.apple.driver.AppleGraphicsDevicePolicy 3.7.7

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleMCCSControl 1.2.12

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.kext.AMDFramebuffer 1.3.2

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.AMDRadeonX4000 1.3.2

  com.apple.driver.AppleHV 1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  3.10.25 com.apple.driver.AppleMGPUPowerControl

  com.apple.driver.AppleLPC 1.7.3

  com.apple.kext.AMD7000Controller 1.3.2

  com.apple.driver.AppleIntelMCEReporter 107

  com.apple.driver.AppleThunderboltIP 2.0.2

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 36

  com.apple.driver.XsanFilter 404

  com.apple.driver.AppleUSBHub 705.4.2

  com.apple.iokit.IOAHCIBlockStorage 2.7.1

  com.apple.driver.AppleUSBXHCI 710.4.11

  com.apple.iokit.AppleBCM5701Ethernet 10.1.3

  com.apple.driver.AirPort.Brcm4360 930.37.3

  com.apple.driver.AppleAHCIPort 3.1.2

  com.apple.driver.AppleUSBEHCI 705.4.14

  com.apple.driver.AppleACPIButtons 3.1

  com.apple.driver.AppleACPIEC 3.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 161

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com Apple.kext.Triggers 1.0

  com.apple.driver.AppleUSBHIDMouse 185,3

  com.apple.driver.AppleHIDMouse 185,3

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5

  com.apple.iokit.IOBDStorageFamily 1.7

  com.apple.iokit.IODVDStorageFamily 1.7.1

  com.apple.iokit.IOCDStorageFamily 1.7.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5

  com.apple.iokit.IOUSBMassStorageClass 3.7.2

  com.apple.driver.AppleUSBHIDKeyboard 176,2

  com.apple.driver.AppleHIDKeyboard 176,2

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.DspFuncLib 272.18.3

  com.apple.kext.OSvKernDSPLib 1.15

  com.apple.driver.AppleSMBusController 1.0.13d1

  com.apple.iokit.IOSurface 97.4

  com.apple.iokit.IOAcceleratorFamily2 156,17

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.iokit.IOBluetoothFamily 4.3.6f3

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.iokit.IOUSBUserClient 705.4.0

  com.apple.driver.AppleHDAController 272.18.3

  com.apple.iokit.IOHDAFamily 272.18.3

  com.apple.iokit.IOAudioFamily 203.3

  com.apple.vecLib.kext 1.2.0

  3.10.25 com.apple.driver.AppleGraphicsControl

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.kext.AMDSupport 1.3.2

  3.10.25 com.apple.AppleGraphicsDeviceControl

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.IOPlatformPluginFamily 5.9.1d7

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

  com.apple.iokit.IOUSBHIDDriver 705.4.0

  com.apple.driver.AppleUSBMergeNub 705.4.0

  com.apple.driver.AppleUSBComposite 705.4.9

  com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

  com.apple.driver.AppleThunderboltDPOutAdapter 4.0.6

  com.apple.driver.AppleThunderboltDPInAdapter 4.0.6

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  3.1.7 com.apple.driver.AppleThunderboltNHI

  com.apple.iokit.IOThunderboltFamily 4.2.2

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.iokit.IO80211Family 730.60

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.iokit.IOAHCIFamily 2.7.5

  com.apple.iokit.IOUSBFamily 720.4.4

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com.apple.driver.AppleEFIRuntime 2.0

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 398

  com.apple.iokit.IOStorageFamily 2.0

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 3.1

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com Apple.KEC.corecrypto 1.0

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  It seems that you have a hardware problem with one or two of the GPU.

  -Make an appointment at an Apple store Genius Bar.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

  Mac Pro graphics problems (end 2013)

  Mac pro end of 2013 freezes with the spinning wheel

• Compatibility «?» (Mac Pro Tower / Firewire / climax together, etc..)

  I take Logic Pro 9, but after looking at all the improvements for Logic Pro X, I can't wait to get up to speed.

  I like the look of the improvements to the plug-in; logic adding distance (not available for LP9?); Drum Kit Designer, synthesizer, etc.

  When he (LP10) announced that there is a flagrant limitation I had with my current set-up but I don't remember what the hiccup was... perhaps there is none and I could be good-to-go.  Can anyone confirm if and where I'm looking at compatibility problems?

  System: Mac Pro Tower (mid-2010) 2.8 GHz Quad Core Intel Xenon

  OS: 10.10.5 (Yosemite)

  Interface: Climax together - Firewire

  If I remember, the question I met was first introduced with the announcement of Logic Pro X was he needed El Capitan - which did not offer the divers "Core Audio" / support, which means that overall height (Firewire) would be uncertain if even not work at all.  "" Looking at the "tech specs" on Logic Pro X, it supports OS X 10.10.  That looks promising (if it in fact the issue with El Capitan and the lack of support for Core Audio driver still exists).

  Can I run Logic Pro X to Yosemite?

  Can I run overall height (FireWire) in El Capitan without the Core Audio Driver issues / Firewire?

  Thanks in advance!

  I must add, additional hardware, I am running is a UAD PCI card in the tower.

• Resonance noise coming from new Mac Pro

  Hi all!

  I picked up recently a late 2013 6 mac pro core. I once owned a mac Mini 4 core i7 model quiet whisper. I hooked all my cables similarly to the way I had with my mac Mini. Now the question is, when im downloading with download accelerator or transfer files in both feel between my server, I can hear sound coming from my new Mac Pro resonance frequency. This only happens when im connected by ethernet. If I disable ethernet and use wifi, this noise is more audible! Is this a common problem! My new Mac Pro would already have problems!

  Thanks in advance

  -Anthony-

  RE: noises reported in Mac Pro end 2013.

  There was an initial report of a noise called "Reel whining", launched by the power under certain conditions.

  Those who could demonstrate the problem got their power supplies replaced under warranty.

  Of course, those who have done nothing and waited for the next version of the software solve the problem have nothing except maybe a headache.

  If this is a NEW Mac Pro, back at the origin of the seller ASAP. If you purchased at Apple in the United States, you can get the unit replaced with 14 days of receipt - the Genius Bar or you local Apple authorized service provider.

  If others, it becomes a problem to repair.

• Mac Pro with screen

  Hello

  We bought a Mac Pro to our office to render 3D images. This Mac Pro is not a screen and is used through screen sharing. The problem is that this Mac Pro retains its 1280 x 1024 screen resolution and there is no other choice (but 1024 x 768). I googled and tried pressing the ALT key when you click the radio nationally, but the list guard being limited to 1280 x 1024 and 1024 x 768, while we work on iMac 27 ".

  Y at - it an option to display more options of resolution?

  Kind regards

  Gert-Jan

  You need to get a dongle plugs into the video output of the Mac to get resolutions more high. If you use two dongles, you can get two screens via screen sharing.

  For dongles:

  https://macminicolo.net/blog/files/build-a-dummy-dongle-for-a-headless-Mac-mini. HTML

  http://eShop.MacSales.com/item/NewerTech/ADP4KHEAD/

  http://eShop.MacSales.com/item/NewerTech/CBLMDPHEAD/

• Mac Pro (2013) will not wake up from sleep after that put 10.11.2 up-to-date

  Problem:

  After that Mac Pro goes to sleep, keyboard and mouse enter don't wake him. Disconnect and reconnect the monitor will not help either. Unplug the monitor wouldn't be helped either. Hotkeys to stop will not help either. (I use Mac since 1986, so I know more tricks). The only thing I can do to start to use my Mac is again holding down the button of physical power for five seconds and make a hard stop.

  Background:

  It is a problem that sometimes in the past. However, it is not reproducible and usually one of the steps above might work, such that unplug the monitor (a Dell 4 K 27 ") of the power supply and then plugging.

  I use physically connected (USB) keyboard and mouse.

  Current state:

  After the 10.11.2 system update last night, my Mac Pro shows this problem every time he sleeps.

  He has already hit a critical delivery photography and currently affects a submission of work for the city.

  This is urgent.

  Other users have reported the same problem after 10.11.2. I've not seen a solution

• Stuck Installing boot camp software support on Windows 10 for Mac Pro mid-2014

  Hello world.

  I have a mac pro mid-2014.

  I installed windows 7 using boot camp and all worked fine

  But my SSD has had some problems so I took it to the shop they replaced the SSD.

  SO now I have a blank disc. I restored time machine (I deleted the windows partition when I back up)

  now, I have just a single partition being original, I started to install Windows 10 by boot camp as usual. every thing works,

  created the USB (I used a disk portable 1 TB, I bought recently), downloaded software and then prompted me to make the partition.

  subsequently handed over running and starts the installation. window has installed fine and started, the boot camp installation window pops up and I click Next.

  now, he will be always stuck to the point trying to install realtek audio.

  no progress, no error report. I had to close the installation later, may not close properly due, try force end it.

  have tried mnay times, tried windows 10 business and education. they are all stuck at the same point

  I don't see how I was wrong.

  someone at - it had the same question or idea on how I can fix this?

  Thanks a lot in advance, really frustrating one simple thing I had tried two days after work. ;(

  Please see Bootcamp 6.0 driver install interrupted .

• CC 2014 Illustrator EXTREMELY slow race on nine Core Mac Pro 6 with Ram 64Gbs. It's not right :(

  Hello

  I just picked up a new kernel 6 Mac Pro and I'm having some serious lag with Illustrator CC 2014 issues. I'm just trying to select relatively simple objects (an illustration on the side of a coin) and there is a huge delay between when I click on an object and when it is actually selected.

  Someone please tell me they know how to fix it? Please

  My company recently "upgraded" my OS to Windows 8.1. (an operating system prior to Windows 8) and I am now terrible performance when you use Illustrator CC 2014. (2014.1.0 release - 18.1.0 (64 bit)). More problematic is that every 5-10 seconds the screen goes black (not answer) for 3 seconds. I had a similar problem with Illustrator CS a year or two ago - I solved this problem by disabling the automatic update of the linked files. So, I'm suspicious that this problem has also something to do with the Illustrator accesses the server, but in this case I don't know which opens access to the server.

  Another colleague of mine using Windows 8 downgraded from "Illustrator CC 2014" to "Illustrator CC" and no longer has the problem of hic - up (unresponsive). "."

• Projects on Mac Pro MacBook: redraw problems in the timeline

  Hi all

  my main workstation for Premiere Pro CC 2014 is a Mac Pro 2010, I am overseas edition on a 2013 15 "MacBook Pro retina. Transfer of projects between the Mac Pro and MacBook Pro works fine, but every time I have (re) - open a project on the Mac Pro, which has been edited/saved on the MacBook Pro before, I have massive refresh problems in the timeline: it's especially black, when I move the mouse some rectangles under will become gray, other blacks--in simple words : it is not possible to work with this timeline at all. CUDA/GPU switching does not help, removing previews, re-opening windows did not help either.

  

  When I create a new sequence, it looks good, I can't copy all clips in a timeline messed up in this new sequence but first doesn't 'see' and copy a small fraction of the clips. The only solution I found, had to IMPORT sequences of MacBook Pro projects. In this case, everything looks and works as expected.

  Everyone has seen the problems of this kind?

  Hi Raoul,.

  rklem wrote:

  This is a moderated forum, right? So can I expect Adobe to comment on this serious question from a customer who pays? No response after one month. No answer from either support, where I reported this bug a few weeks ago. Maybe I should try Twitter instead...

  We do not monitor the forums, but it is impossible to respond to all posts. We rely on the community to help us in this regard. You can try Twitter, but we generally tell people here so we can discuss the issues more easily.

  You say that you have contacted support.
  Have you started here? Contact the customer service

  You process the queue on video?
  You have a case number?
  Let us know if I can help you more easily.

  rklem wrote:

  I updated the NVIDIA software to the latest version, which has not changed anything.

  I'll make sure that you use exactly the same CUDA driver for each system.

  Thank you
  Kevin

• Mac Pro start problem

  I have a Mac Pro Tower, that will not start the first time I press the power button, the machine "lights up" in a way that the light in front comes on and I hear a click, however the fans and readers do not engage and the screen is blank. I am then forced to hold down the power button until it stops and hit the power key once again, and each time on the second time it starts. Now I use this equal parts of Mac on the Mac partition and equal parts as a PC, this problem appears when I start in two, but I put in this detail to explain another thing, I have a PC graphics card in the computer. I have all his own CUDA Driver Version that allows me to do it on the mac, but it might have something to do with it. Even if the problem persists when I have my Mac AFI graphics card in the computer as well. I also want to add some other details, nor the mac from the PC partition can go in "standby mode" or the computer goes back to be a brick with just the front light on. (Sometimes the LED keyboard works, and sometimes is not after the mode 'sleep'). In addition, if I restart the computer, it starts well the first time, as well as when I move from mac to PC partition. I tried to do resets of LANDAU and SMC and that has not worked, someone at - it ideas?

  Thanks guys for any input you may have.

  The next time that you touch inside, try to carefully remove the 3 v button cell half hidden behind the graphics card and check the required 3 Volts. If less, a new is needed. You can also use CR2032, which is used for the remote control-door garage and car-door-key original is BR2032.

• I found some files created in 2013 in my Mac Pro 2015

  I have a problem with my homebrew. Then I checked/usr/local, I found some files in/usr/lib/are created in 2013, for example, /usr/local/lib/libtcl8.6.dylib and usr/local/lib/libtk8.6.dylib, it's so weird. My new Mac Pro (retina, 15 inch, mid-2015) made by a mac in 2013? My mac is almost top-of-the-line. Please don't tell me that I bought a retread of a...

  Is BTW, there a convenient way to analyse my Mac Pro for a few bad things, such as virus or some files as the file mentioned earlier cover? These files are located by "doctor of BREW $".

  OS X does NOT ALL files in the tree/usr/local.  Nothing.  Nada.  Zilch!

  Homebrew however stores ALL its files in the tree/usr/local.

  So, if you have files with a date of 2013, they were probably from Homebrew.  And as you know, the Homebrew doesn't part of Mac OS X.

  I do not use the Homebrew, but if I had to guess, he downloaded a precompiled package with built in 2013 and place these files in the tree/usr/local.

  Is BTW, there a convenient way to analyse my Mac Pro for a few bad things, such as virus or some files as the file mentioned earlier cover? These files are located by "doctor of BREW $".

  In general, it's a bad idea to install a-squared 3rd party packages.  They have caused more problems then they never solved, based on the many reports of panic the kernel, System slowness and reports missing disappeared in these forums.  Contributors to the forum a long time does not.

  OS X includes its own protections.  Please, start by reading the following:

  How Mac OS X protect me?

  <http://www.thesafemac.com/mmg-builtin/>

  In regards to the doctor of the infusion, it was good that he found the stuff that he put them there, don't you think

  I have nothing against the homebrew, but if you are going to use it to install the packages open-source, you should have an understanding of what it does and where it stores its files.

  Also note: most open source packages you download and compile it yourself, will also install in the tree/usr/local.

  MacPorts.com (another package manager) stores its stuff in/opt/local /...

  Fink (www. ) FinkProject.org) one of the first managers package for Mac OS X, it stores the stuff in the tree/sw /...

  Still, I'm guessing the files that concern you came a homebrew package that has been installed, or maybe when you installed homebrew himself.

• Problem of mask in Premiere Pro CC 2014

  Hello!

  I have a strange problem with the tool hides in Premiere Pro CC 2014, and made this video to explain the problem.

  Hope someone can help me.

  Thank you very much

  / By Haar

  Problem of mask in first Pro CC 2014 - YouTube

  play with some projects I have, just by chance I had used an old layer of setting in 1080 p for a sequence of 720 p. When the mask is applied to this adjustment layer, he did exactly the same thing as you in your video!  to check your adjustment layer, it is the right size for the sequence?