Some problems with the Satellite A210 - 11 p

Similar Questions

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Some problems with the videoheader

  Hey guys,.

  I have some problems with the videoheader in first Pro CC 2014/15. I also googled and tried almost everything I found. So I asked first on Twitter and they told me to ask this here again.

  So here go us: Clemens on Twitter: '@AdobePremiere correct it's ridiculous... Why is the videoheader visible on the good site but not on... in the picture you can see my problem and it's really annoying.

  I hope you can help!

  Kind regards

  Clemens

  Hi Vinay,

  well... my fault... I do not have the small area of drag (red rectangle) above the audioheader allowing to drag to the bottom of my videoheader.

  

  Thanks for trying to help me in Vinay

• Some problems with the LAN on Satellite L10 card after BIOS update

  Hello

  I have a problem with my satellite L10. Map does not work after the installation of the new network of edge of Bios (2.80).
  I tried it on Linux, BSD and WinXp. OS see my net card.
  I can even install parameters and ping 127.0.0.1 and my ip.

  But all the other pool spoke to me query time-out.

  Help me please.

  Hello

  What to say I put t think that this could be linked to the BIOS. First of all, as you said that the LAN card is recognized correctly in the device if Manager she s works well!

  However, you could try to access the BIOS and could set the BIOS default settings. Don t forget to save changes to BIOS ;)

  In addition, it would be advisable to reinstall the NIC driver. The Toshiba driver page provides the Realtek LAN driver v5.618.1015.2004.

  Good luck

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Some problems with the construction of project in Eclipse

  I use js + css3, html5 in my project for smartphone.

  And I have problem (error) with a construction project.

  ---------

  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive application
  [INFO] The analysis of config.xml
  [INFO] The application of filling source
  [ERROR] Feature is not found in any extension (blackberry.bbm.platform)
  BUILD CAME OUT WITH 1 ERROR

  ---------

  What should I do to fix this error?

  Thank you!

  Thank you!

  I accidentally duplicated the subject, and the problem was solved in http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/Some-problem-with-building-proje...

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!

• Some problems with the Camileo webcam

  Hello!

  as a first step, please excuse me for my poor English writing!

  I have a TV and it seems that many users in France have the same problems as me:

  * When I'm in webcam mode, I cannot use the microphone of the camileo, is this normal?
  * When I try to open my movies in windows movie maker, it crashes. What is the problem? It seems that the video format of the camileo is not recognized by this software,... strange!

  Thank you very much!

  Yann

  I saw this cam but I'm not familiar with the whole feature. The fact is that each webcam with built-in mic should offer its use with different applications such as Skype, MSN, ICQ and others.

  In my opinion, there is a problem with the settings and check these settings in the application, you use. In most of them, you will be able to select the sound source.
  All video format I can say that based on the description you can choose between AVI and MPEG4 format.

  By the way: you try to open the files saved on the HARD drive?

• A few problems with the Satellite U920T-100

  Hi guys,.

  my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

  The questions are:
  -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
  -It starts not at all, only after a few attempts
  -It will not stop
  -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

  New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

  Also: WLAN connectivity is really bad.
  The laptop is not able to find networks, while my laptop has no problem with it.
  And when he finds them and connect, the connection be lost - once again: no idea why.

  That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

  I have reset factory?
  Run through some specific tests?
  Or is is hopeless, because there are so many problems with it?

  I'd appreciate your help!

  Hello

  > I should factory reset it?

  I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

  Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

  From my point of view, the recovery of the system is the first step, you should try to solve the problem.
  In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

  Hope my advice might help you a bit

• Connection problem with the satellite C660 - 24L

  Hello world

  I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

  Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

  A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

  Computer behaving the same way when connected and disconnected from the mains.

  All other devices will connect to the router talk-talk with no problems.

  Any help is appreciated, thank you in advance.

  Lewis.

  Post edited by: lewlew

  Have you noticed a few problems if you use the local network connection?
  Original Toshiba WLAN driver is pre-installed on your computer?

  To be honest, it is not easy to say why this show is starting to happen so suddenly.
  Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

• BIOS update failed with the Satellite A210-17Z

  I was asked by Tempro to update the BIOS of my laptop Satellite A210-17Z.
  I agreed but the laptop turns off before completing the update of the BIOS. As a result, I can no longer boot my computer.

  Looking for a solution on the internet, I have read that there is a possibility of creating a crisis recovery disk. I tried to do with the Phoenix crisis package, creating a crisis with a disk recovery disk and so on.

  When you try to Flash the BIOS and the start-up of the machine, I was pretty convinced to succeed as the system did start reading the disk for about 2 minutes... but nothing happened.

  I would like to know if anyone has experience and advice to help me recover my laptop.
  I was told that I should try with the original version of the BIOS (the one I got when I bought the computer) but I do not know how to find it because I don't know what version I had at the beginning.

  Hello

  To be honest, I think Tempro is the worst app Toshiba :-(that prompts users to update the Bios and after failure of the Bios. In this forum, you can find numerous threads about the failure of the Bios. He recommended to contact the ASP (SAV) to reflash it. You can read and ask other users how to recover the Bios Phoenix:

  http://www.theeldergeek.com/forum/index.php?showtopic=21209

  Good luck!

• What CPU was delievered with the Satellite A210 - 11 p

  What the process type of TL - 56 in satellite A210 - 11 p, 65nm and 90nm?

  Who knows? Please tell me, thanks!

  null

  All I know is that the Satellite P210 - 11 p was delivered with the Turion64 AMD X 2 TL56 1.8 1600 CPU.
  Is the CPU code name: Tayler

  If you need additional information on this CPU, you can search the site of AMD.

  Good luck

• Had some problems with the montage of images in the thumbnails slideshow widget

  Hello

  If someone can maybe give me some advice to fit correctly some photos in the slideshow of thumbnail widget.

  Here is the Web page: PORTRAIT of CAROLINE

  You will see that some of the images are in place and others do not. I want to keep all the in a square form, but the editing got some problems. I tried to resize the pictures with photoshop without success.

  So any tips?

  Try to change the orientation of the images and save the same format and then use in miniature.

  Thank you

  Sanjit

• Someone at - it problems with the Satellite Pro C650 battery?

  Any other owners have problems with their batteries?
  Even when completely loaded - then unplugged and not on internet, I get less than an hour out of her life.

  Has been using MS Word in the last few days - and had to plug the laptop in an hour!

  Hello

  We need to change and optimize battery usage settings.
  This is possible in power management.
  You can decrease the screen brightness and can change another option which is located in the Windows 7 power management.

  The point is that the battery depends on its use for laptop and you will still notice different battery due to the use of different software and different settings working time.

• Problem with the Satellite A300D - 14 p

  Hi all!!

  I have problem with games Test drive Ultimate and Need for speed pro street, when I press the button run, don t car, when spending the same time, car will lead, then I run the button, but my car don't stop at the same time, then the car stops! When I play this games keyboard button will stick, but when I work or play other games, my laptop works properly!

  Maybe that's the problem of processor, and I need to update drivers...! What do you think?

  I look at my CP CPU load is 100% the two core, when I play this game!