some sites ask me to rember the name of the newspaper. If I do not accept some of them keep the valid name and others do not display them more.

Similar Questions

• Cannot install addon off-site because "Firefox prevented this site asking you to install the software on your computer.

  I try to install GMail Watcher by Sonthakit. It is hosted off site here: https://sites.google.com/site/sonthakit/gmailwatcher

  Whenever I try to install the addon by clicking on 'Install the free', Firefox tells me "Firefox prevented this site asking you to install the software on your computer" and does not give me an option to ignore the warning and install it anyway. I clicked on the padlock icon in the address bar and activated all the appropriate permissions, but it will not yet let me install the addon even after restarting Firefox. I have just reset Firefox and use the latest version.

  How can I say grass and let me install the Firefox addon?

  This is because the part of the page button is loaded into an iframe, as you can see if you click on the button install free
  You get only the button allow if this button is located in the home page and not when the button is in an iframe.
  One solution is to open this image in a new tab by right clicking the button.

• Whenever I update "send/receive" a message asking me to write the network password and user name.

  I am connected to wifi in the hotel (Orange) and I can't SEND email, I just have to receive them.

  Whenever I update "send/receive" a message asking me to write the network password and user name. This from my mail server (not orange because that one is ok I have access to the internet).

  Most of the suppliers do not let you send if you are not connected through them, or they have special settings.  So for now, see if you can access your e-mail via webmail and use this interface and in the future, contact your ISP and ask them if there is a way to send emails when you are connected through a different network.

  Steve

• I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu.

  I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu. I'm on a Mac Pro 2013. Latest version at all.

  Looks like without the audio element is a nested element.  You will need to restore the audio signal in order to see the wave forms.

  I have the same problem (sometimes):

  https://forums.Adobe.com/message/8527998#8527998

  Without rhyme or reason, as far as I can tell.

• I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

  I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

  There are two main reasons for the mistakes of certificate:

  1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
  2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
        <>http://support.Microsoft.com/kb/931125 >
     and go down to the section:
     'Update Package root (designed for Windows XP only)'
     There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

  HTH,

  JW

• In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

  In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

  Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

• I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  Not compatible with the OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the new OS

  I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  System indicates the computer is not compatible with OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the latest OS.  I think that later models of Macbook Pro 17-inch with processors that allow updates.  I was wondering if these can be swapped or if alternatives were available.

  Only the RAM and storage (HD, SSD) can be changed.  Everything is welded to the map logical and selected specially for the system configuration.

  I'm sorry.

• How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

  Original title: deleted user accounts.

  Hi guys,.

  I want to know the activities of a user whose account has been deleted. How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

  Hello

  Thanks for posting in the Microsoft Community.

  There is no newspaper available for the activities of the user. There are just a few activities of windows and the error logs is stored in Windows.

  Hope this information helps.

  If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.

• I bought the Photoshop 19.99 plan for a month so that I can check the new Illustrator and other new programs CC and see if I liked the concept... Now that I checked out, I decided to upgrade to the full cloud...  There is a prom one year

  I bought the Photoshop 19.99 plan for a month so that I can check the new Illustrator and other new programs CC and see if I liked the concept... Now that I checked out, I decided to upgrade to the full cloud...  There is a promotion for one year to 29.99 per month for users of cs3, but when I try to upgrade my contract he wants to load the full 49.99... is there someone I can call?

  Hello Mary,.

  There is a telephone support | Orders, returns and exchanges, you can use > http://helpx.adobe.com/x-productkb/global/phone-support-orders.html.

  If necessary and for further questions click on http://helpx.adobe.com/contact.html and 'open' Please use the cat, I for my part had the best experiences. I quote Adobe Preran employee: the chat button is enabled as soon as there is an available agent to help.

  Hans-Günter

• Open image file in email sent me to the site asking me to download the software

  I try to open my email with attatchments my friend sends me but sent me to the site asking me to download what I need to do to open these types of files? It is usually only as attatched pictures jokes or other stuff.

  You've obviously got service pack installation problem (which one, in passing, SP1 or SP2?).

  I'm not qualified to answer why your computer crashed the last time that you have installed the service pack.

  Suggest you take this issue of pack service for a more technical forum like the one below:

  Windows Vista IT Pro Forums - section Windows Vista Service Packs

  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/threads

  Keep in mind that you are now asking a very different question than what you started with.

• Site ads continue to use the proxy settings and I get the message "Authentication required" time and time again. I have stop advertisements to use my proxy settings?

  I have put my school proxy settings and use them very often. On some Web sites, ads continue to use these proxy settings (probably to show me ads based on my preferences or I don't know), and I get the message "Authentication required" time and time again before the end of the loading page. It's annoying because if I have several tabs open and am currently on another page while loading the website with the ads, I'm brought back to this page to authenticate. Can I get asked 3 times to authenticate while this page loads, and it takes forever to load because of this. I don't want to disable my proxy settings because I use it very often. I tried to uncheck the "Accept cookies from Web sites" and nothing happens, it's always the same. I want these ads to stop going through my proxy settings. How do I do that?

  Hello

  You can try the add-on Adblock Plus . In addition to subscriptions, you can manually add URL patterns or click on an ad to add a filter.

  Support

• A test of web sites to make sure that the browser/Flash player / other is sufficient for all the Captivate content

  My previous object in the header was a little confused, so I hope it's good I start again and more clearly what I need.

  I have hundreds of users who access the Adobe Captivate 5.5 training.  Many users have no problems to display the content.  SOME users have bad, specially when you view a video included in the training.  It will just play for them.  These users have different browsers, so it would seem that the browser type is not a problem.

  What I hope is...

  a website that allows users to know that they all needed to run any content in a session of Captivate.  For example, as you know, Adobe has a web site to inform the user what version of Flash Player, they have (if any).  I would be great to have a site that would let the user know whether they meet the minimum requirements (not simply Flash Player) to successfully participate in training.

  Is anyone aware of such a site?  Or have any ideas on how to build one?

  Thank you and I'm sorry for not being clearer on the previous post.

  Best regards

  Mark

  Captivate outputs (in general) as Flash. So as long as users have a recent version of the Flash Player, they should be technically able to read the content.

  However, of course, online delivery depends on the internet connection of the user. What happens if you are their video feed and their connection is slow?

  For similar concerns, point us our users on speedtest.net and ask them to publish their results. It sometimes helps illustrate their slow connection means a slow video streaming.

  And, of course, the older computer, complexion less it is going to be making the course. My older computer, with the frustration of my 5 y/old, plays horribly - Flash sites and occasionally and it's a computer clocked at 1.6 ghz with 512 MB of RAM and XP... with the latest browsers and Flash player. You can always ask their specifications of the computer, but it is not an easy thing to determine through software/website.

  So you can create a simple 'minimum requirements' page that you can point to... but that doesn't make a diagnosis... Well, apart from the simple version of Flash player/detection (which is pretty simple), it is a complex task.

• Pages of Firefox won't load does not correctly. User name and other action buttons do not respond when clicked. I tried the Java toolkit release, but who doesn't.

  Some sites such as Netvibes and other sites containing columns all of a sudden not correctly displayed. Registration or login buttons do not respond.

  The plugins are up to date.

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When I export to PDF format, some of the hyperlinks work and others don't

  I work with InDesign CS4. I have a lot of hyperlinks, most of them on youtube, some articles on the internet. When I export the page 11 as a PDF file, all hyperlinks work, except for two who are to articles. I did all hyperlinks on InDesign and InDesign in the hyperlinks window, when I click on "go to destination" exactly the same way, all hyperlinks work very well. But then the PDF document, 2 do not work, despite this.

  Why is this? What should I do?

  Thank you.

  "line break": I discovered that the URLS of the hyperlinks in the file to find a way, but when I click on it, the browser adds the characters 0% D at the end of the URL. So I posted a question in the forum player and someone said that 0% D represents a line break. This probably happened because I pressed Enter before the hyperlink and then copied the URL of the page in the menu new hyperlink. If the entry has been included, causing the browser to add these characters and preventing the internet to be able to find the page.

  The solution was not to copy - paste the URL in the menu new hyperlink in the hyperlinks window, but typing in the URL instead.

  Now, all hyperlinks work!

• How to pre-populate the organization name, and other fields in the form of access policy?

  Hi all

  I created a strategy of access to users to autoprovision for MS AD, but I need to solve a problem. I do not know how to pre-populate e.g. name of the Organization (or other fields) of resource AD user in the access policy and prepopulate the plugins created for user AD form do not work here.

  Please, could you help me to solve this "problem"?

  Thank you

  Milan

  Access policies get a static value.  You can't fill a field with an adapter.  If you do, leave the field blank and put an adapter on the process shape to your field which must be filled by using code or logic.

  -Kevin