Some updates of Windows 7 installation problem

Similar Questions

• HP655 update for windows 8.1 problem with Realtek driver

  Need help with the problem addressed in another forum HP.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/HP-655-update-to-Windows-8-1-problem-...

  The last message point far on this forum to get help.

  -----------,

  Install the new Bios and the network works

  655 HP

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• Windows Update, error: "Windows Modules Installer has stopped working and was closed".

  Whenever I run windows update, and try to install an update for Vista, I get the error message"

  "Windows Modules Installer has stopped working and was closed"

  . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

  Thank you

  Luke

  Hi guys

  I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

  Thank you

  Luke

• Satellite M30X windows 2000 installation problem

  I noticed ribooth has also posted a message with the same problem... but I haven't seen a real answer. The problem: if I try to install Windows 2000 Professional (including SP2) on my satellite M30X-130. The windows 2000 Setup program crashes with a "page in a no fault paged area" in acpi.sys just at the moment where the status in the status bar has been changed from windows 2000. If I press F7 during startup, acpi support is disabled and no page error occurs but the windows 2000 installation hangs on "the first screen" where you should be able to start, stop and? installation. There is no additional hardware installed and I'm unable to partition and format the HD with W2k. If I do it with win98 and create a FAT32 partition and try to install w2k on it I get the same ' page in a no fault paged area "acpi.sys error. Any suggestions to fix this?

  Hello
  Make sure that the system BIOS and other hardware is compatible with Windows 2000.
  This article may also help.

  HOW to: Specify a specific HAL or a third party during the installation of Windows
  http://support.Microsoft.com/?ID=216251

  Good bye

• Windows 7 installation problem Pavilion dv6-6c45eg

  Since I have a free license for windows 7 Professional at home, I decided to install it on my new Pavilion dv6-6c45eg that came with Windows 7 Home Premium.

  The problem is that the installation process stops at the beginning and said something like: "A required CD/DVD drive driver is missing... ", then he gives me the choice to load a driver. I googled a lot since yesterday and there seems to be something related to the SATA driver, however even load the SATA driver installation is not moving forward, after loading the driver it say that no new units have been detected.

  What I tried:

  * Install Windows 7 x 32 and x 64
  * Install from a USB flash drive

  * Install Windows 8 (same problem in Windows 7)

  * Check the SATA in the BIOS (not possible to see or modify on the BIOS F.19)

  * Search for the shortcomings of HD (even changed the HD)

  I'm sure it's something related to a driver, because I also installed Linux (OpenSuse, Fedora and Ubuntu) operating systems and they work fine.
  So, I would appreciate help to solve this problem.
  Thank you very much.

  Marcio

  Hi B Mista, thanks much for your reply, but I finally solved the problem, as described in this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

  Kind regards

  Marcio

• Update for Windows Vista (KB2492386) problem

  I continue to be put on hold for 5 minutes and when I try to shut down my computer while the computer is installing an update.

  Finally, the computer shuts down but it doesn't seem like everything has been done.

  Of course the next time I start my computer (which sometimes takes forever and others is pretty fast) I stopped him again with exactly the same problem.

  I looked at the edits and get the message that miss me a Vista (3.3 MB - "WindowsUpdate_8E5E0147" "WindowsUpdate_dt000" - update for Windows Vista (KB2492386)) update but when I try to install it - it invaraibly fails.

  Help, please.

  Hello

  1. you remember you have changed your computer?

  Try to follow the steps in the following article and check if it helps: How to reset the Windows Update components? http://support.Microsoft.com/kb/971058

• HP 655 update to windows 8.1 problem with Realtek ethernet driver

  Hello

  I do an update for Windows 8.1 and now I have a problem with the Realtek ethernet driver, which does not. If I look in Device Manager I see an error for Realtek ethernet driver:

  "Your computer's system firmware includes enough information to properly configure and use this device.  To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35) »

  I have the latest version of the bios: F.26

  I try to install the driver from the HP site: 8.3.730.2012 HP driver

  also I try with the Microsoft driver: 8.1.510.2013

  Ethernet works fine in any other OS.

  Thank you for you time and I hope that solutions to this problem.

  @all

  Install the new Bios for HP 655 compatible sound

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Realtek-Ethernet-driver-error-code-35-Compaq-CQ58-Windows-8/m-p/3208099#M53864

  655 HP

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• Update of new Windows 7 installation problems

  Hello

  After windows 10 road test for a few months, I decided that it wasn't going to work for me. So I used my drive of windows 7 to do a new installation, after I formatted the hard drive. I installed the operating system successfully, but when I do the 200 some setting to update and to install as failure 8 and it asks me to restart, I do. After he completes the updates I login and then the screen is black except for the cursor that I can move around. I did that only connected things are a monitor, keyboard and mouse and Ethernet and always have the same question.

  I restarted in safe mode, and I am able to do throughout, on the desktop, no problem. So that being the case I thought I could do a system restore and updates from another chance. Well, I did this 3 times now with no luck. I even downloaded the diagnosis of WindowsUpdate tool and when I run it I get the error code "0 x 80070002.

  I honestly have no idea what to do and have not found help online.

  Restart your computer and wait 30 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Windows update KB 2686509 security installation problem (error code is 0X8007F0F4)

  original title: I'm having a problem installing to a KB 2686509 windows security update.  The update downloads but continues to do not settle.  The error code is 0X8007F0F4.  What can I do to solve to partition?

  This installation has "failed" to install several times.  I keep getting the security shield on the toolbar.

  Hello

  I suggest you follow the steps listed in this article and check if this may help.

  http://support.Microsoft.com/kb/958051

• Display problems in Firefox after some updates for windows 7

  Updated with a few windows 7 corrects and installed sp1. After a reboot, I realized that FF I messed up big time and have no idea how to fix this. I have reinstalled/restarted but nothing works. Could someone help me with this? Photos of problem below

  http://Tinypic.com/view.php?pic=14wtzcn & s = 6
  At the opening of the FF, it's what I

  http://Tinypic.com/view.php?pic=mkkqxh & s = 6
  After hovering over my bookmarks toolbar, icons appear, but it's not supposed to look like that!

  http://Tinypic.com/view.php?pic=e84kqs & s = 6
  Right-click menu

  http://Tinypic.com/view.php?pic=2ahbgq9 & s = 6
  File menu

  also everything that I go into the empty poster address bar but still entered

  Hello bkuu, this could be a problem with hardware acceleration. try updating your graphic driver, or in the case where there is no new version available at the time disable hardware acceleration in firefox > options > advanced > general. in case you cannot access the menu options because of the question you are currently experiencing, launch of firefox in safe mode first.

• Update Windows vista installation problem

  ' installation failure windows didn't install the update for Microsoft silverlight (kb960353) error WindowsUpdate_0000064C ""WindowsUpdate_dt000. I tried to download the update several times of the month passed without success. I have closed all active programs, and then tried, that didn't work. It's the only update that will not be installed during the month.

  Visit http://silverlight.net/GetStarted/ and click on install Silverlight (Windows Runtime). Carey Frisch

• iMac 27 end of 2012 windows 7 installation problems.

  Dear Apple community.

  First of all I know that the topic was discussed a few more times, but after I tried to follow the instructions and directions and patterns almost everywhere on the net I am a blind spot.

  I have an iMac 27 "end 2012. I managed to install Windows 7 with Bootcamp through a combination of different methods, on line. (downloaded the Bootcamp Support 5.1.5621 software as described in many forums)

  But I am stuck because I always have problems with my UBS3 ports that do not allow my keyboard and graphic tablet to work (I had to uninstall the app in safe mode to return to UB2) and the resolution of the screen that is only 1280 x 720 at the arrow, trash and other stuff that appear distorted.

  Since I'm on some architecture and 3D modeling programs in Windows I want to ask for help because I don't really know where to look further.

  When I solve the problem, I promise to write here a detailed method to install win7 on iMac late 2012 for those in need.

  Can anyone help me to finally get a solution? Thanks a lot for your time and looking forward to hear that here you.

  Hi Polfus,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your Boot Camp installation. If you continue to have unexpected behavior of port connections and display resolutions in Boot Camp, you can find the troubleshooting steps in the following article useful (my apologies if you've seen elsewhere / fact them):

  If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support

  You can also check that you are running the 64 bit version of Windows 7, as shown here:

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  Concerning

• Windows xp installation problems

  Unfortunately I have no error message as such, first of all the toolbar menu bar and start disappeared in an irreversible way, at the same time that no executable programs would work, no sound would not play and only internet browser as well as wading through my folders and files was the only operational things. After an attempt to remedy this situation, I was told (online) to reinstall windows xp, this seemed an idea without danger at the same time, as I did before attaching unrelated problems, however, when reinstalling (or should I say before installation was complete) in one of the many process, the pc would restart and get to the device registration screen , from there, it's been jammed indefinitely, and flashing icons of many colors and forms have appeared and in some cases, replace a word or a number. (placement and Visual icon seem to be completely random)

  I also read (before attempts to reinstall) it could be a malware problems, well that sounded rather difficult for me, as the malware program would not start let alone clean all the above questions. I have redownloaded malwarebytes and again, unsuccessfully, to get any .exe program to initialize even. An error appeared in keeping it (unfortunately silly me, I had not planned this far ahead and has not copied the error name/numbers)

  I have tried many various difficulties through the system recovery and repair, but without success, I know it's not good to go, but any help at all would be greatly appreciated.

  * note * my usb ports are both issues and was not able to get the most recent of my files on an external hard drive etc, I would really like to come out of this with my hard drive in tact.

  Alternatively, you can attach your hard drive as 2nd drive or slave for other PC work and then just copy the data off the coast.

  Because of the strange characters and colors I would always start the recovery console

  Unfortunately it did not work and the same colors and icons appeared at startup boot via the controls proved to be without success either.

  I have yet to try this another recovery disc, I'll try that now, other then that, it seems that it would be a fixed format.

  Respectfully, that you try many different things absolutely without success. I encourage you strongly to create this live cd, following the instructions on the link in my previous post, recover your files, reformat, re-install and do with it.

  Any method allows you to retrieve your files get and do. You have re-installed windows 10 times since your first post and have been without headaches. It's just my recommendation of course.

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Repair Windows 7 installation problem

  I want to try a repair installation on my computer running W7 Pro x 64 SP1 to see if it will solve a problem that I think is related to a problem with the OS.  I have a version of Windows and a valid product key, activated.   I have my original W7 install disk (it was actually an update of XP) as well as a separate drive that is the update SP1 of W7 (NOT an installation disc).

  Despite having valid keys, I am unable to download the image of recovery of Microsoft software, receiving a message that the language is wrong and that I should choose another language.  I went to tech support and they said it was because the product key was used 20 times - I only used it once, and it was obtained directly from MS during a support for the problem to upgrade installation.

  In any event after hours of troubleshooting including calls and conversations and an initial statement that my only recourse was to buy a new key technical support referred me to MS shop, telling me that they would give me a new key. After more chat, the MS store tech referred me to the reception of the answer; so, after hours of support not I dropped.

  With the resources I have, is it possible that I can build a drive that I can use to repair/installation, without having to download a picture of MS?

  Well, more hours on the phone with various divisions of MS support and FINALLY got someone who gave me a link where I could download an ISO of Win 7 Prof x 64 legitimate, installable to my system.  It took many more hours than I would have had to spend, this copy is legitimate, but, at least, I can now use this to do a repair/install of my dysfunctional W7 program.

• Flash Player with Windows 7 installation problems

  successful installation of ADOBE FLASH PLAYER 64 - bit 7 WNDWS... HOWEVER ' AFTER a SHORT PERIOD OF TIME a LITTLE BOX CONTINUES the 2pop upward. I am told to update/install the new version of 'ADBYFLPLYER' SAID 'PROB of CONFIGURATION' or McAFEEINCOMPATIBLE Somethin Somethin? PLS HELP... I want to just wathvc some videos of the U2bd. UMkay.

  ...

  Uninstall * all * Internet plugins (Adobe Flash Player, Adobe Shockwave, Adobe Air, Adober Reader, Apple QuickTime, Real Player, Microsoft Silverlight, etc.).

  Reset.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  You can uninstall McAfee and replace it with something else.  There are several free options (Avira, Avast, AVG all come to mind) who will be probably better function and be less intrusive with fewer problems.

  -Download and install all the Plugins new Internet - directly from their respective web pages.