some work sites, some give an error 400

Similar Questions

• I have installed autodesk inventor 9, 2002, and it is not working properly it gives an error that there is a problem of compatiability. Is there something I can do to correct the problem of compatiablity?

  I have installed autodesk inventor 9, 2002, and it is not working properly it gives an error that there is a problem of compatiability.  Is there something I can do to correct the problem of compatiablity?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on setup.exe O run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Pro 64, windows update/Defender/firewall has stopped working. Firewall gives me error 0x6d9. Defender gives me 0 x 80070424.

  Original title: Windows 7 Pro 64, windows update/Defender/firewall has stopped working.

  I have Windows 7 Professional 64 bit installed, after the time of my last updated 31/7, my windows update has stopped working, and no so Windows defender and firewall.  Firewall gives me error 0x6d9. Defender gives me 0 x 80070424.  Update Windows to 7.31 was an update of the Defender, however, windows update will not give me the option to uninstall this update because the Defender has completely disappeared from the prompt that allows you to choose which puts up-to-date to uninstall. Is it possible to manually remove somewhere else?

  I ran SFC/scannow and I WAB32res.dll has been altered, so I copied the file on my windows 7 CD for 64 Professional (from program files/common files) and copied and replace my program.files/common files one.  I restarted the SFC and the same error occurred.  I had 5 errors like this:

  2012-08-03 19:15:59, 000002fb CSI Info [SR] cannot repair the military record [l:24 {12}] "wab32res.dll" Microsoft-Windows-WAB-Core, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch. "

  I also ran Microsoft Safety Scanner Scanner, he finds 16 errors and fixed them (I saved the names), but even after I reset the computer my Windows Update/Defender/firewall STILL does not work!

  Anyone have any ideas? Especially how to fix 'wab32res.dll"maybe that I recorded it in the wrong place?

  I noticed there is one in each 'program folder' folder (program files x 86 and regular for 64 bit).  Is also wab32res.dll somewhere in system32?

  Thank you!

  Hello
   
   
  Method 1: See the following steps:
   
  a. at a command prompt, type the following command and press ENTER:
  takeown /f Path_And_File_Name
  For example, type takeown /f E:\windows\system32\jscript.dll.
  b. type the following command and press ENTER to grant administrators full access to the file:
  ICACLS Path_And_File_Name/grant ADMINISTRATORS: F
  For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.
  c. type the following command to replace the file with a good copy of the file:
  Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination
  For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.
   
   
  Method 2: Since all this started after a Windows Update, restore the computer to a date where updates are not installed.
   
  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
  Method 3: After System Restore, windows updates are available again, put the computer into State of startup in minimum mode and then allow Windows Update and see if that helps.
   
  Reference:
   
  A clean boot to test if any element of service or third party application startup is causing this issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135
   
  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

• Help-Code for one or more InDesign cannot be generated. (Error 400: font not available).

  Hello

  I have the last Version of Muse in a Mac. Yosemite.

  I have problems when I want to publish my Web site. It appears error 400.  For some reason, the code cannot be generated for Typekit. That s the German version. "Code for one or more InDesign in"Homepage"cannot be generated. (Error 400: font not available).

  

  A time comes this: publish the view have an error, because the Muse may not have an HTTP connection. It may be a software firewall that does not allow to connect. The main reason may be a software firewall that stops the HTTP connection. Probably you should check the Firewall properties.

  

  

  But nothing has changed.

  I did the following things:

  1. I'll raise the app
  2. I disconnect from the creative cloud, leave, reconnect and reopen Muse.
  3. I remove Ghostery.
  4. Muse I uninstalled and re-installed.
  5. Restart the computer.
  6. Try again with a new Web site.

  It's my current antivirus

  

  Help please! Need to finish a project.

  Looks like you have anti-virus/anti-malware with settings that prevent Muse to connect to internet. Your screenshots are not visible on the forum. They must be inserted using the response within the forum feature in your browser (click the camera icon to add an image).

• Adobe Stock site gives me an error 400?

  For some reason any Royalty free images, pictures and graphics. Adobe Stock gives me an error 400, what the hell happened?

  

  Hello

  Please see the links below for help:

  Site error stock 400? The site is down?

  Error 400

  Hope this helps!

• I'm trying to update a site I'm working on and I get a Business Catalyst error 400, 101004

  I'm trying to update a site I'm working on and I get an error 400 Business Catalyst, 101004 message. I know it is a mistake to credentials, but every time that I go to support that they don't give me the contact by telephone or chat option, the only option that they "recommend" is forums and they sent me around in circles a million times! Is it just a number I can call? Because this support Web site is not help me at all.

  Please try to disconnect muse and CC, re - open and back in check. If you still get the same issue, contact with the team of British Colombia at any time through this link:

  http://status.BusinessCatalyst.com/

  Thank you

  Sanjit

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• I have some 3rd party widgets I want to use with Muse. When I try to import this Muse gives an error: 276 (number of unexpected format. Check if there is a newer version of Muse). My current version of the Muse is v7.4 please guide properly.

  I have some 3rd party widgets I want to use with Muse. When I try to import this Muse gives an error: 276 (number of unexpected format. Check if there is a newer version of Muse). My current version of the Muse is v7.4

  Please guide properly.

  I use a 64-bit computer. I discovered the widgets were not made for earlier versions such as v7.4 had no 'library' to import these widgets to.

  Thanks for the reply but. I appreciate it.

• When you access Intranet sites that use SSL certificates issued by our internal PKI, FF for Windows gives an error of "incorrectly put in the form of message coded DER"

  When to access Intranet sites who have the SSL certificates issued by our internal PKI, FF for Windows gives an error message - an error occurred when connecting to myshaw. Security Library: improperly formatted DER encoded message. (Error code: sec_error_bad_der)

  Chrome and IE work fine. This is a PKI again using the signature SHA-2 algorithm.

  I was able to identify the problem. Our public key infrastructure has been using some signature algorithms that FF did not support.

• When I try and publish a site of Muse, get the error: internal error: 400 Bad request. (117007)

  When I try and publish a site of Muse, getting this error:

  Error: Internal error: 400 Bad request. (117007)

  And this isn't to let me publish the site

  Found a similar position that could provide some indication error of publication of Muse

• When I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file.

  original title: require authorization of the SYSTEM

  I decided to do a clean install of the latest Windows 7 RC yesterday and today crossed and have started to remove some programs on a separate hard drive so I could reinstall their own.  However when I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file.  I am using an administrator account, but I can't just simply delete the file.  I tried going to and change the owner to my account or administrators, close it, change the security permissions to allow me to have full control, and then I can finally remove it.  The problem is, I have to do for all the files one by one in the folder, and I wonder if there is an easier way to go about this, or if I can access the user of this SYSTEM and just delete them all from there.  Thanks for the help.

  Hello

  Not trying to resurrect the old discussions, but I'll answer anyway because this thread came on top of the list of search results when I searched for "you need permission to the SYSTEM; I hope this will help everyone.

  Note: here, "the record" as a subject refers to the folder that you want to remove.

  Step 1: Go to the built-in Administrator account, you can do so by following these steps:
  a. go to control panel > system and security > administrative tools
  b. on the left panel, go to local users and groups > users. You should now see a list of users on your computer
  c. right click on the administrator account that appears in the list and select Properties
  d. uncheck "account is disabled" and confirm by pressing OK

  Step 2: Connect to your newly activated administrator account

  Step 3: Now, we start to configure the security settings that will allow you to remove this folder which was (perhaps) held by the SYSTEM:
  I'm going to make the assumption that you want to remove a folder and all its subfolders along
  a. right click on the folder
  b. go to the security on the top tab
  c. click on the Advanced button which is at the bottom

  : Step 4 the first part to configure security settings to set the owner of the folder:
  a. go to the owner on the top tab
  b. click the button change located downstairs
  c. There should be a list of accounts to choose to change the property, this is located under the label "of a change in ownership:'"
  (d) the entry 'Administrator (YOURCOMPUTERNAME\Administrator)' should be there; If this isn't the case, then add it to the list:
  -Click on the button "other users or groups...". "who's down
  -Under the label "enter the object name to select (examples):', there should be a text field you can type into it;" type in "Administrator" (without the quotes of course)
  -Click on the "Check names" button which is located on the right. 'Administrator (YOURCOMPUTERNAME\Administrator)' should now be there _For itself_; Well, if not, then you must remove the line that does not represent the administrator account that you are currently
  -Confirm by pressing OK; It will now appear on the list of accounts, you can choose from
  e. now, select 'Administrator (YOURCOMPUTERNAME\Administrator)' from this list
  f. check 'Replace the owner of subcontainers and objects' to propagate our change
  g. press OK to confirm. a message should now pop-up window, which says to re - open the properties. Do by pressing all the buttons OK see you

  Step 5: now that we have the owner of the folder, we still not done. There is one crucial step left which is to remove permissions inheritable:
  a. Repeat step 3 to learn to re - open properties and get to "Advanced security settings"
  b. go to the permissions on the top tab
  c. click on the button "Change permissions" which is down
  d. at the bottom, there should be 2 check boxes:
  -' Include the permissions that can be inherited from the parent to this object': deselect this. When you do so, you will get a warning on the parameters of parent is not not able to spread. Select 'Add '.
  -' Replace all permissions of child object with permissions inheritable this object': check this
  e. press OK to confirm. Windows will warn you this time; Click OK
  f. reconfirm by pressing OK; now, you should get to properties again

  Now, you shouldn't have all the warnings about the SYSTEM do give you permission as he attempted to perform actions on this issue.
  All the boxes to change the permissions on the accounts (properties > Security > Edit) must now be enabled, and you can tinker around with it.

• Site not give me the ability to download Flash CC, when I click on download it says: "we are currently experiencing issues, please try again later" there is no error code at all. Do this please be fixed soon? I spent all night updated my O.S.

  Site not give me the ability to download Flash CC, when I click on download it says: "we are currently experiencing issues, please try again later" there is no error code at all. Do this please be fixed soon? I spent all night my O.S. Update prepares to use the Flash, and now I can't download it. I have I need to work on important projects.

  Hello Becca,

  Please try to download the CC application directly on the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  Hope that helps!

  Kind regards

  Sheena

• Windows XP update gives an error, the site has encountered a problem and cannot display the page you are trying to view.

  I just re-installed Windows XP and am trying to get windows updates. I get this message - the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.   How can I fix this. Thank you mitch

  Hello

  Are you facing problems connecting to the internet when you access Web sites?

  You can try the steps from the following link and check if it works:

  You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Let us know if it helps!

• I am trying to burn some of my downloads to computer on a disc and some songs come error and do not copy

  I am trying to burn some of my downloads to computer on a disc and some songs come error and do not copy

  Hello

  1. What is the format of the file you want to burn?

  2. what application you use to burn the disc?

  Method 1:

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Burn a CD or DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Method 2:

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions

• Several installed programs give me error messages that they cannot work properly because I'm not the administrator

  original title: Administrator status

  Several installed programs give me error messages that they cannot work properly because I'm not the administrator.  I double checked with control panel to change my status and I AM ADMINISTRATOR. What is the problem and how to fix this?

  Several installed programs give me error messages that they cannot work properly because I'm not the administrator.  I double checked with control panel to change my status and I AM ADMINISTRATOR. What is the problem and how to fix this?

  Hey Honeybe2

  When you want to use the right click on it and run as administrator

  Walter, the time zone traveller