Somehow, all my exe files are marked as Acrobat files - I can not run the software on my computer - when I start the computer none of startup programs because they are all trying to open in acrobat.
Somehow, all my exe files are marked as Acrobat files - I can not run the software on my computer - when I start the computer none of startup programs because they are all trying to open in acrobat.
See if anything here help: https://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html
Tags: Adobe
Similar Questions
-
I just got my DVD for Lightroom 6 and it will not install and ReadMe directions do not resolve the issue or is not available. There is no .exe file I can find on the disk. What should I do?
Try it please link below:
I hope this helps.
Greetings
Megha Rawat
-
No file association for .exe files.
Hello
This is probably due to a malware attack? Perhaps one of the AV.exe varierties.
Just in case there are persistent pieces of malware here is the method of complete elimination.
.exe question difficulty in the next message.Try Mode safe mode with networking - repeatedly, press F8 that you start.
The best two methods allow scanners to run and/or AV.exe out of the way or removing.
1.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task managerProcess tab - complete the process on AV. EXE and continue with the uninstall Guide.
If necessary use start - computer or Windows Explorer to navigate to
C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
is installed.Right-click on it and rename it to ZZMbam.COM (or something different than now) and
Double-click it, and then run it like this. You can rename it back later. Do the same with
other programs according to the needs. Use this method to others as needed - NOT assume all
a program deletes all or that it is no other malicious software.---------------------------------------------------
2.
Another method is to use them:Use Process Explorer to "Suspend" the process will not stop
Then use AutoRuns to delete the malicious program startup items.
Now use UnLocker to delete the files in the malware.
You may need to do a file at a time.
Process Explorer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoRuns - free
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxUnLocker - free (do not install the adaware Ebay)
http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtmlAV.exe
==============================================
The AV.exe malware goes by many names:
XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
antivirus, scams for you force to pay for them while they have no advantage at all.How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
Run them in regular Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
Use Google to see how to remove.
http://www.prevx.com/ <-- information="">-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
turn it back on.How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Can not run the demo of StarCraft or downloaded files
It is not just drop the files basically downloaded everything as downloaded demos... I can't run the DEMO of StarCraft for example, even on here, if I download it. I must have a CD or a DVD-ROM... Its very annoying... Basically, I can't run everything that said (Type: file) he outside, implemented programs.
Will you suggest try here...
http://us.Blizzard.com/support/index.XML?locale=en_US&gameId=3
--
Gina Whipp
2010 Microsoft MVP (access)Please post all responses on the forum where everyone can enjoy.
-
Can not run the .exe (not all exe) file
Hello
Have a problem when running the .exe file in windows 7.
When I tried to open a 32-bit in my 64 bit OS setup.exe file, nothing happens at all. But when I tried the first time, a pop-up message displays this "want to re install using recommended settings. But after that, nothing happens. (the problem with only this file). But it works well in the other 32-bit OS. What should I do?
Hello
You can check this link troubleshooting steps:
https://support.Microsoft.com/kb/2688326?WA=wsignin1.0
Registry warning
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
I hope this helps.
-
I can install the 5.0.1 version but it won't work. I got this version works when someone elso was using my computer. I don't know how it happened, but the calculation froze and I couldn't run Firefox afterwards. I got Firefox to my computer. Downloaded the latest version once again and I tried to run it. I've done several times without success
It seems that the installation is corrupt.
Follow these steps.
- Go to Download Firefox 5.0.1 and download the installer to your desktop. If necessary, use Internet Explorer to download, but in this case, choose "Save" when you see the prompt. Do not choose "Run"
- Then go to add/remove programs, scroll down to "Mozilla Firefox" and delete it, choosing to keep your bookmarks, customizations, etc. (don't tick the box).
- Reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox
- Finally, run the installation file downloaded previously on the desktop.
Your bookmarks, etc., customizations are stored in a different location and will become available to you even once you complete the installation.
As a precaution, make a backup of your bookmarks as follows:
- Press CTRL + SHIFT + B to open the Bookmarks Manager.
- Click on the link to import and backup and then click on HTML Export and save the file somewhere.
You can use this file at any time to restore your bookmarks if that proved necessary. Simply reverse the procedure and choose "Import HTML" instead.
NB. If you use a download accelerator, turn it off before trying to download Firefox. These utilities are a common cause of corrupt files, in which case you get the error message you mentioned.
If this suggestion solves the problem for you, please click the button solved next to this post after logging in to the forum. This will help others looking for a solution to the same problem.
Thank you.
-
Can not run the executable file by LV7.1
Hi all
I'm surprised, I can't build and run the executable file LV7.1.
I used to write a few vi with LV7.1 and built the executable according to these vi. It was no problem to build and run this executable file at that time. Now I can open these vi well with LV7.1, bu I can't run this executable file, it will be a mistake, please refer to the attachment. I'm trying to compile an executable file according to a simple vi, and then I can't run this exe file much more.
Can you help me solve this problem? Thank you in advance.
Evan
@Christian: this is not correct.
One of the reasons to do this is if LV 7.1.1 is installed, and then you install an application, including the runtime engine built in 7.1. It corrupts the execution engine.
See here: http://digital.ni.com/public.nsf/allkb/680E61A4D02158A186256F7A0073C228
Daniel
-
Shortcuts in Vista, go to the correct exe file but will not run
I ran numerouse reg fixes, automatic and mannual. Some bad shortcuts Guide others go right back but will not open them. The problem is with the lnk shortcuts
I ran numerouse reg fixes, automatic and mannual. Some bad shortcuts Guide others go right back but will not open them. The problem is with the lnk shortcuts
Here is a tutorial on how to rebuild your cache of icons. Your icons cache may be corrupted.
http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html
Option One is easier. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
Yesterday, 18:46 Some time ago, when I went to my files using Windows Vista, I could already see the preview of the images in my folder. But now, all I see is either a glass with brushes (the MS Paint logo) for JPG images and a background painted with paint brushes on my BMP images. So, how to get back to see previews in my folder?
I also have another problem: in a few other cases, I see that the name of the program or file when I have the view defined as tiles, details or list. But when I choose one of the views icon (or small icons, medium icons, large icons and Extra large icons) I don't see the name of the program or file.
How can I solve these 2 problems?
I think I can answer the first question. I'll check back for an answer to your 2nd question.
RE: Can't see thumbnails (excerpts), only the icons
Start button > in the search box, type Folders options > view tab > ONE- always check "show icons, never thumbnails" > OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
How to find converted files? Using a Mac.
Hi gerardb7002580,
You will be able to find your document exported under tab https://cloud.acrobat.com/recent file, select it to download.
Kind regards
Nicos -
How can I configure icloud on my iPhone and a windows PC?
Have you followed these steps?
-
All trying to open my itunes, it says "itunes library drive is locked, or you don't have permission to write to this file. I tried already affecting my folder and subfolders and files read/write homegroup and still does not work. I DON'T want to NOT uninstall and reinstall and lose all my playlits - I currently have 250 of playlists (I'm a dance teacher) and begin to teach Friday. HOW can I fix it as soon as possible?
Hello
Please follow the steps.
a. go to the iTunes folder. In Windows, the default location is: \username\Music\iTunes.
b. right-click and select Properties.
c. uncheck Read-only.
d. click on apply. Click OK to change all subfolders. Click Ok.
e. now check and see if you can open iTunes.I suggest also please contact iTunes for assistance support team.
-
Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.
Well, I was on my computer, I tried to open an exe file and I got this message
Windows cannot access the specified device or file. You can not have the appropriate permissions to access the item.I have windows xp, anyone have an idea what to do?Hi Reaper14,
· The question is limited to this particular .exe file?
· You can open other files very well?
If you are unable to open a .exe file, refer to the following article.
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
Click on the link below.
-
all my components are grey in multisim11. Path to my configuration in the global preferences file is also grayed out, can not change the standard cfg
Hi Escapermark,
Take a look at these articles to the knowledge base, one should set the gray on the problem:
http://digital.NI.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F
http://digital.NI.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F
http://digital.NI.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument
-
I've accidentally maxed the display open all trying to open a word document and I can't go back to its original size. What should I do?
Click the button on the top middle right, or give a better explanation please.
Maybe you are looking for
-
I can't on Ebay. I can't access all of their features. Just to start
When in my Ebay site under sell similar next to one of my articles, I'm supposed to be able to revise, change etc. to one of my ads and all of a sudden it doesn't work on FireFox. We work just fine and if I go back to Internet Explorer it works. What
-
Have tried various solutions proposed in the support pages for this problem. Have also installed the full installation file instead of automatic update. Nothing helps.
-
Access via SSH o/s RN102 iSCSI LUN
Hello I can access NAS via SFTP & SCP. Where in the structure of the file is the LUN file so that I can copy off the coast of the NAS for editing also. We have an iSCSI partition that is only considered as RAW by the iSCSI connector in Windows and we
-
Windows update does not work and displays C80044E error code.
Windows update does not work and displays C80044E error code.
-
rimpublic. Property connection
In the file rimpublic.property in the MDS Simulator, what are these parameters used for? [Record] Logging.Level = 4 Logging.Console.log.Level = 4 I found the article about logging HTTP activation knowledge base, but then I saw these settings in the f