Somehow the Palette of tools easier to find?

Similar Questions

• Cannot make the palette of tools in view on a remote computer

  Yes... I have read the following Knowledge Base: http://digital.ni.com/public.nsf/allkb/84FCD62020BF074186256569008375E2

  I don't see the tool palette as the development system is shared between two people.  The other person is in another time zone country / different.  We have both put the code on the station where the UUT, which is far for us two.

  The other developer must have a giant screen with higher resolutions to what I can achieve with one I use.  Furthermore, I can not change the resolution of a screen in a remote session (even using several managers of remote session).  There is simply no way to recover the tools palette.  (Yes, this is not the first time that happens...   )

  I managed to find someone to change the computer screen resolutions, and he could not bring the tool palette by following the steps in knowledge base.

  Development of a PC, there is an entry in the file LabVIEW.ini, as follows:

  toolPaletteLoc = 400, 1499, 551, 1577

  Unfortunately, there is no entry in the development PC remotely.  Add it did not help.

  Is there an another super-secret location where I get the toolset in sight?   The selection of 'See the tool palette' must be smart enough to understand the resolution of the screen and take it in sight.

  Thank you!

  crossrulz wrote:

  I'm more curious to know what the 4 digits are for the token of ini.  I can understand a X and Y, but what are the other two?

  The tools palette is a floating window. It is quite common to specify locations of window as left, right, up, down, because they can be resized.

  Ray, you must ensure that you restart LV, of course, to see if the INI line has an effect.

  You can also try to change the resolution to something low. This will cause usually Windows reset the position of the window, while they are visible, but I don't know if this applies to floating windows.

  You can also use the windows key with the arrows to move the current window around and maximize/restore/minimize it. Unfortunately, I wouldn't be surprised if this does not work on floating windows either, as they do not seem to attract attention.

• How can I stop under tools appear automatically when you click a tool in the palette?

  I must have clicked something or inadvertently pressed a shortcut keyboard or something because a few weeks earlier, the secondary tools on the palette of tools started popping up without the button of the mouse for a second. Now when I click on a tool (the tool rectangular marked for example), the hidden tools (elliptical marked, single line etc..). Please do stop! It's annoying as hell.

  I use PS CS5 on Windows 7.

  Usually, it takes with the double click time preference system.

• How can I use a custom tool easy to machine the same LabVIEW is the basis on average DC - RMS VI

  I use a cRio 9024 and read PWM with an analog input card 9205.  It was suggested that I use the basis on average DC - RMS VI to convert the voltage of the PWM signal into an analog signal (effective value) for use in my system.  The problem is that the 9024 can use LabVIEW models (it's VxWorks). I work through the device a custom tool easy and I wonder if someone can guide me in the right direction.

  I am running Veristand 2014, cRio-9024, 6modules, and run the scan engine.  It seems that's the reason why I can't read analog voltage (starting a PWM signal) since the signal is running at 200 Hz and the Scan Engine runs at 500 Hz.   I tried to avoid making a custom device or an FPGA and found a work around using the 9401 in counter mode.  I can get the numbers that I need, that's how I'm heading at the moment.  I would like to custom device approach, but not this sprint.

• How to make the cursor easier to find in XP

  What should I do in XP, so I can do the easy to find cursor by clicking the CTRL on the keyboard and then the cursor is highlighted.

  I don't know if this is the option you are looking for, but if you can try the following.

  1) click on the START menu
  (2) choose "Control Panel"
  (3) in the list of applications, double-click the 'Mouse'
  (4) in the mouse properties window, choose the "Pointer Options" tab (at the top)
  (5) check the box "Show location of pointer when I press the CTRL key"
  6) click on OK to save

• I really liked the snapshot tool in the old acrobat. He cannot find in acrobat pro DC. All the hard to find ar tools. Where can I find the instant tool?

  I really liked the snapshot tool in the old acrobat. He cannot find in acrobat pro DC. All the hard to find ar tools. Where can I find the instant tool?

  Hi mitchellt65695629,

  You can find the "Take Snapshot" tool under the edition menu of Acrobat DC.

  A quick guide to Acrobat DC Adobe Acrobat workspace basics

  Kind regards
  Nicos

• Anyone know where I can find the cookie cutter tool to 14 items?

  Just bought Photoshop elements 14 and can't seem to find the cookie cutter tool.  Help!

  Click on the cropping and tool in the toolbar options down the expert mode, you'll find cookie-cutter.

• I can't find my brush, the regular brush tool. I don't see smart brush on the toolbar. It seems to have disappeared. Help! I have a watermark that is saved as a brush, and I can't use it!

  I can't find my brush, the regular brush tool. I don't see smart brush on the toolbar. It seems to have disappeared. Help! I have a watermark that is saved as a brush, and I can't use it!

  You may ask this question in the Forum of Photoshop elements can help because there are differences between how the programs of work.

  Photoshop Elements

  What happens when you press SHIFT - B on the keyboard several times?

  Terri

• I'm trying to find the paint bucket tool in the new draw for the ipad. can someone help me?

  I'm trying to find the paint bucket tool in the new draw for the ipad. can someone help me?

  You are referring to the iOS app? Tap into a confined space with one of the tools of painting until it fills up.

• Free transform tool has disappeared from the palette. How can I get that back?

  The free transform tool is displayed is no longer in the palette. I guess I must have done something by mistake to make it disappear, but I don't know what. How can I get it back?

  What happens if you use the shortcut of pressing 'e '? It does not appear? It is located with the rotation, scaling and shearing tools so if one of them is selected, it will appear in the control panel instead of the free transform tool.

  

• Cannot find the quick selection tool (previously associated with the magic wand tool) on Illustrator CC (the most recent version installed on October 14, 2014)

  I just installed a new version of Illustrator CC and CS6 on 14 October 2014 and I couldn't find the quick selection on this version tool, this tool already lies with the magic wand tool

  I don't remember a quick selection tool in Illustrator. Are you sure it was in Illustrator?

• How can I find the palette layers in PSE 8?

  Hello

  I use Photoshop 8 editor and try to create retro-style/technicolor images by using the palette layers and creating grayscale images have disappeared through red, green and blue filters and then colorized the (as described here: http://www.youtube.com/watch?v=wJQj2ykF7fs). I'm looking for the palette layers.

  Thank you very much for your help!

  Elements not channels. It takes the video on Photoshop. However, you can add an array of strings to PSE using tools of either Grant (free):

  http://www.cavesofice.org/~grant/challenge/tools/index.html

  or elements + simplephotoshop.com (inexpensive, does several other things that the tools of Grant).

• Where can I find the magic wand tool?

  Where can I find the magic wand tool?

  It's in your Toolbox, the fourth field of the top.

  If you do not see, the quick selection tool is probably chosen.

  Press (that's a pressure downwards, not click) on the Quick Selection tool and hold the button for a moment.

  You should see the magic wand. Move your cursor to the bottom and select the wand.

  

• I'm ready to get Firefox because on several occasions, Notepad opens whenever I have to shoot anything and at no time have I ever used the Web Developer tool

  Have used Firefox for many years on several computers. On the Home Office whenever you need to CAP a letter, notebook open instead. Every time!

  It is only on this one computer, none of the others.

  I completely uninstalled, cleaned and purged Firefox from this computer several times. I ran several virus checks. I did reset the Firefox multiple on several times.

  Yesterday, I uninstalled completely the slightest bribe related to Firefox I could find on the system, made a clean to get rid of the hidden files and duplicate system, and with what I was hoping it was a clean system, reinstalled the latest version of FF, same problem.

  WHY Notepad comes up whenever I hit the Shift key?

  Somehow the developer tools and notebook always see and in the end, the problems start again.

  Hello Mark,
  I can understand your frustration with this problem - especially after you run on this issue after you have reset your computer too.

  Can you please check if Notepad is in place, if you turn off the devtools.scratchpad.enabled parameter by setting the value to false. You can do so by following the instructions in the Mozillazine on changing the configuration of Mozilla editing about: Config

  Thank you

• Change folder icon in the Palette of functions

  Hey, got two questions.  I am writing an instrument driver for an instrument I have here at work, and I work the VI.  I organized and inserted into a library, which is in a project, including the library and examples folder (so basically how downloaded Labview instrument drivers are set up) on the screws.  I put it in the instr.lib folder and saw him appear in the palette of functions very well.  So according to that installation, my questions are:

  (1) how can I change folder icons (not the icons of VI - done already that) in the palette of functions?

  (2) how LV instrument drivers hide the 'Examples' folder and view just the screw in the folder "Public"?  (they don't seem to be marked as private)

  Thank you!

  GE

  I think the secret is to have a mnu file, which defines what will appear in the palettes. You can create one by modifying the pallets (under Tools > advanced) and there you should be able to delete items and change the icon from the palette by made a right click. Probably, you should also make sure that the mnu file is saved in the same folder, so that you can have in other PCs. Note that the palette editor has this annoying confirmation dialog which tends to hide under other windows and you need at the end of editing, so go to somewhere you can find it before you start editing.

  Another option is the use of VIPM to install the driver, and which will also allow you to edit a range.