Someone out there who has an ongoing problem with 7 refusing to print, even after that the driver was abandoned and re-installed?

I have a Toshiba laptop that runs Windows 7 with an HP printer 6 L. I am running Open Office 4.0.0 and the latest version of Adobe Reader. To date, that the system is undesirable! The 6L display test endless pages but refuses to print anything out of system 7. I dropped 6 L Driver, registry & file cleaned up and optimized the system and then reloaded the driver off of the HP site but the system refuses to print. I even went up to turn off the printer for more than 24 hours to try to get the printer to the reduction in the memory and empty the memory to zero to try to kickstart the printer to pick up the 7 material systems. Up to present all this for nothing. 6L memory is fixed at 1 024 Ko and the document larger than I tried to print has been 136 k so the memory capacity must be nothing. Anyone, anyone, outhere who can help, please. I'm ready at this stage to give up the printer with an AX, since it is now beyond the frustration and get into madness! I must also stress that the 7 system also creates a (1 copy) in the printer Panel. There is no need too!

Hi Mike,.

Do you have an error message when you try to print from the Windows 7 computer?

I suggest to refer to the following article and follow the steps.

Solve printer problems

http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

You can also follow the steps in the following article.

HP LaserJet 6L - cannot print from a custom Application Windows

http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=ipl00001&lang=en&cc=us&ContentType=SupportFAQ&prodSeriesId=25476

Reference:

HP LaserJet 6 L Printer series- Frequently asked questions

http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportFAQ&lang=en&cc=us&docIndexId=64178&TaskID=101&prodTypeId=18972&prodSeriesId=25476

Feel free to get back to us if the problem persists. We would be happy to help you.

Tags: Windows

Similar Questions

  • Is there someone out there who has built-in Cisco first optical 9.3.1 the Ciena 6500?

    We have an upcoming project where it looks like Ciena is going to be the winner.  Currently, we run first Cisco optical 9.3.1.  Is there someone out there who is actively control and configure 6500 CPO Ciena DWDM equipment?  If so, are there drawbacks, gaps?  All things good?

    Thank you

    Steve King

    Hello
    Unfortunately Ciena unsupported in the Conference of the PARTIES at all. Check it please first Cisco document view Supported Devices, 9.6.3.

  • burn files to disc is there someone out there who will help you?

    Hello... First of all, let me say this. I rarely had or wanted to use my optical drive. The only time I do is for my back up, where I use a third-party who is simple and automatic, because as you know what windows 7 has to his back upwards. I've tried 'help and support', I found to be just as much of a joke. I went to "windows help and support" and entered "burn files to disc. With the info that came, I started at the top. When you do this and read the first two lines it will tell you to see this link. Click on the link and ln the first two lines agin it says see this link. Click on the link and you are immediately on the link you leave...

    Best 30 results for burn files to disc
    1. 1 burn a CD or DVD in Windows Explorer. It brings you here,

    If your computer has a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. Windows Burns discs in the active file system format or in ISO image format, depending on which disc format you choose. For more information about how to decide which format you should choose when burning a disc, see which CD or DVD format should I use? Click on that and it brings back your right to where you left, so I came here. I am about everything that just to try to have everything back and fourth questions and my answers. I have also read the info I found on different disc types and he drank who leave still doubts as to which to use.  So here's what I need from the community if you please. I want to send several discs of the same to members of my family containing the "images and animated files, I did for them for Christmas." I need to know the correct disc format to use so that they are all available on different devices which they may have. Whether it's a DVD player, PC and so on. I'm just them (dics) wanting to be right and I need help for my 73 year spirit, will be comfortable. Is there someone out there who will help? Thank you all... scare0340... Oh Windows 7 HP service pk 1, IE9 all to date

    Hello

    Well nothing we have discussed in this forum would have caused you to lose all the files.

    Eventually, you use a different account and cannot see the files. Make sure that you are
    connected with an ADMIN account so you can access all files on the computer.

    Or you moved or deleted.

    Have you looked in the trash?

    Recover files from the Recycle Bin - Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/recover-files-from-the-Recycle-Bin

    How to restore files and folders in Windows 7 with previous Versions
    http://www.SevenForums.com/tutorials/85679-previous-versions-restore-files-folders.html

    ----------------------------------------------------------------------------------------------------------

    This could help you recover a file, or a previous version (all versions of Vista and Windows 7).
    http://www.ShadowExplorer.com/

    ShadowExplorer - recover lost files and folders (Vista and Windows 7)
    http://www.SevenForums.com/tutorials/132087-ShadowExplorer-recover-lost-files-folders.html

    -------------------------------------------------------------------------------------------

    Recuva - free - recovers files deleted from your Windows computer, Recycle Bin,
    map of the camera digital or MP3 player. And it's free!
    http://www.Piriform.com/Recuva

    Recuva - Forums - help here
    http://Forum.Piriform.com/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • There is a problem with Adobe Acrobat/Reader. If this is the case, please exit and try again. (0:104)

    There is a problem with Adobe Acrobat/Reader. If this is the case, please exit and try again. (0:104)

    I get this message when I try to open a PDF from a Web page link. When I open the task on the Applications tab Manager, I don't see that adobe Acrobat/Reader listed at all.

    How can I solve this problem?

    I can answer my own question.

    After typing "patch" and read a few threads, I found out how to fix it.

    http://forums.Adobe.com/message/4541936#4541936

  • problem with adding line in tabular form after that put 4.1.1 to level

    We have recently installed the Update 4.1 .1. We now have a problem with some of our tabular forms created using the wizard. The delete and update feature works fine, but when trying to insert a new record, it will insert only the first record, but after that, it will no longer inserts. It acts as ApplyMRU (updated online Multi) is not at all shooting. No success or error message. I tried to create forms based on the rowid and also on the suites (with and without triggers), and they all behave the same way.

    This happens both in IE and Mozilla. Tabular forms were working fine before the upgrade.

    Everyone knows this?

    We just hit this issue and thanks to this thread and a light bulb above my head, resolved this question today. There is more to the story. Copy the necessary images in place works, but get the full version 4.1.1 images.

    We were already on 4.1.0.00.32, so I applied only Patch 13331096 upgrade to 4.1.1.00.23. Patch 13331096, at least one that I downloaded a few weeks ago IS NOT ALL OF THE NECESSARY IMAGES.

    Fortunately, I thought to download both. When I did a number of files in the directory images between the full version and the patch, the County came up short for the patch.

    If you have this problem, get your hands on the full release 4.1.1.00.23, NOT Patch 13331096and copy these files to image in place. Who sets the we.

  • Problem with loss of files in Dreamweaver after that that they were saved.

    Hi all

    Currently, I am a student and worked with Dreamweaver in an attempt to build my portfolio website. I had my full and registered my Dreamweaver file root folder, then I have and he has given a site or designated a site, whatever it is called. I was about to load an image and I didn't like the way he was going to come along, so I tried to get out, but he wouldn't let me for some reason any. So I decided to just close and go back to my previously saved file. Here is what happened:

    Screen Shot 2015-03-07 at 10.57.40 PM.pngScreen Shot 2015-03-07 at 10.57.28 PM.png

    This is what is left, but no files. Please, for the love of God can someone tell me what keeps it doing so. This happened last year when I was in another class and had to take an incomplete and never had to finish it because I had nothing to spend and could not remember the steps. I'm so frustrated and it always happens when there is no one around to help. I am so tired of software and technology to miss him. That someone is a paying client when this happens? In all cases for all users information I have Dreamweaver CS6 CC and I'm running it on a MacBook Pro retina 15-inch, early 2013 that uses OS X Yosemite 10.10.2. I would like to know if there is anyone else having this problem. I hope this information helps too, as I am frustrated and at times second guess if it is a matter of circuit breaker in this area. Very disgusted and discouraged right now.

    Augustine

    You could try to use the Finder to locate the file that you are trying to open and compare his situation to the location of your site folder in setting up a Dreamweaver Site:

    It wouldn't, there is incompatibility between where is the file and the folder of your site - such as configured in Dreamweaver.

  • Problem with HSDIO 6552 example: hardware compare - location of the error. GEN and Acq


    Hi Anthony,.

    Thanks for your reply. He really help because I don't know there is a limitation to HSDIO6552 connected via NOR cable theft.

    Maybe it is good sense, but I don't understand before.

    My goal is to show the client how well the product could strobe and data reader. Generally, the digital model will not behave like the samples presented, but there is a possibility.

    After reading your response, I suddenly vi again and it show that the transition from one generation to the acquisition or vice versa will have at least 1 cycle of Z or 2 cycle of player / strobe only.

    Thanks again for your help.

  • There is a problem with Adobe Acrobat/Reader. If this is the case, please exit and try again. (0.104). a continuous loop!

    I see another thread similar to this problem, and it's more than 2 years with no response. I downloaded an update yesterday and now I need my cc statement and cannot get it back!

    I closed and reopened player but everytime I get the popup image below

    Capture.PNG

    Repair the installation via the control panel; Add/Remove Programs solved the problem

  • There is a problem with Adobe Acrobat/Reader. If this is the case, please exit and try again. (523:523) I get this!

    Hello

    PLEASE HELP WITH HE ABOVE ERROR MESSAGE I RECEIVE!


    Hi Valerie,

    Please let me know the version of Adobe Acrobat/Reader & operating system installed on your computer?

    Also, try this: -.

    1. Launch Adobe Reader/Acrobat.
    2. In the menu, choose Edition-> Preferences-> General
    3. Uncheck 'Enable protected at Startup Mode'
    4. Restart the web browser and Adobe Reader.

    Kind regards

    Nicos

  • I have problem with my Apple Watch image burn just swop the watch again today and put in place and it does the same thing on the new watch

    It's my second Apple Watch with the same problem. I'll send a picture off what it looks like. This watch is new today 21 February 2016 after I change my original I got on December 27, 2015

    /

    Hello

    This isn't a problem or an error. It is an intentional visual effect that is designed to repeat the contents of the underlying screen.

    The effect appears every time that see you some screens that sit on top of the other, for example:

    -For displaying Notification Center (dragging down when you view the screen of the watch face - like in your picture);

    -For reading a notification;

    -For the opening of eyes (by sliding upward when you view the screen of the watch face).

    -By the use of Siri.

    The underlying mirror not precisely the content of the display function. Instead, it adds a blur effect / ghosts.

    If you want to disable this feature:

    -On your iPhone in the app shows, go to: Watch My > general > accessibility - turn on / enable the setting to reduce transparency.

    This setting stops the effect to be shown on the display of your watch.

  • OK - I don't have a problem with my Apple ID, but I have a problem with my iCloud account. How to reset the e-mail address and the password when the email address is no longer active and I forgot the password?

    I have access to my Apple ID.

    I don't have access to my iCloud account.

    How can I reset my email and password for iCloud?

    They are generally the same.

  • Suddenly, I have a column on the left side of my screen shows all the latest tweets.  I didn't ask for this purpose; I certainly do not install it.  And I can't find a way to shut it down or remove it.  Someone out there has an answer?

    I do not know how to remove a column on the left side of my screen that can display applications of social networks and RSS Web site, that you want to appear.  I deleted all pet food but now I have an empty column and I want to delete this, and I can't find a way to shut it down or remove.  Someone out there has an answer?

    Box of Safari?

    Click on the sidebar button in the toolbar of Safari

    or

    Click on the 'View' menu in the menu bar of Safari and choose "Hide Sidebar".

  • I bought the software for Adobe photoshop lightroom 5 Office depot, I have the serial number to download that will work in the United Kingdom if I sell it to someone out there

    I bought the software for Adobe photoshop lightroom 5 Office depot, I have the serial number to download that will work in the United Kingdom if I sell it to someone out there

    If you have a serial number US and that the person has an ID Adobe UK I don't think it will work... but you'll have to ask Adobe (it is an open forum, not the Adobe support)

    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

    Don't forget to stay signed with your Adobe ID before accessing the link below

    Creative cloud support (all creative cloud customer service problems)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

    Read also the transfer (sale of your software) https://forums.adobe.com/thread/1355892

  • just a comment that could help someone out there

    just a comment that could help someone out there: my 4S has been affected by the recent IOS 9.3...  She went to recovery mode and couldn't fix 3 weeks went up error 29 I read everywhere that if I had changed the original battery that I would not be able to restore, but my original battery was bad today, I decided to try it back original battery it loads and guess what all those post there ARE REAL u need to use your old battery to do a restore if all goes well When I put back the new phone battery still works again Dungeon u post...

    One of the reasons why you shouldn't try to change the battery by yourself. Let Apple or an Apple authorized Service provider that there is none of the parts sold by Apple and the 3rd third-party products can damage the rest of the material.

  • All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile.

    All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile. Any ideas, anyone?

    So it's not a logins.json file?

    I see a signons3.txt file and a file signons.sqlite older, if you can try to see if you can import passwords stored in this file.

    You can force Firefox to re-import the passwords in the file signons.sqlite and regenerate the file logins.json with the following steps:

    • reset the signon.importedFromSqlite pref on the topic: config page by default via the context menu
    • Delete the logins.json file in the closed Firefox with Firefox profile folder

    When you restart Firefox, then you should have the pref signon.importedFromSqlite with the value set to true.
    You have passwords that are imported in the password manager, unless there were errors or signons.sqlite signons3.txt.

    You can open the topic: config page via the address bar.
    You can accept the warning and click on "I'll be careful" to continue.

    You can use this button to go to the current Firefox profile folder:

Maybe you are looking for

  • Apple Watch 2 software update does not work

    Why not improve my iwatch?  Hanging installation. To install the update, Apple Watch must be connected to the charger (what is) and less than 50% charged (mine is 100%). Click on the ok button and nothing happens... of ideas? This is a question asked

  • Unable to create the new network former TC

    Hello So I have the current generation of TC acting as a router as well as a HDD on my old to wide wireless broadband. I experienced some problems with connectivity recently (where my MacAir shows that I am connected to the internet, but no matter wh

  • How can I keep a window on my desktop open while working in another window?

    I want to work in 2 or more windows at the same time. How can I keep them all open? Thanks for your suggestions. It's probably a matter of head bone, but what I can say?

  • PIX 501 config probs - beginner needs help!

    Have a bit of a nightmare trying to set up external access to one of our servers through the pix. He is currently in its factory config. I tried assiginig an Acl to allow the remote desktop on port 4999 from outside, but it doesn't seem to work. I ha

  • WEB - VPN in outsite interface

    Hi all I'm putting a WebVPN, but I have a problem when the vpn through outsite interface access. If I put inside the interface for web vpn users allowed, access is normally done, but outside the interface is not possible. Debug displays the message "