Someone received the gingerbread update still?

I hear about some beta-testing?


Tags: Motorola Phones

Similar Questions

  • I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates.

    I installed Turbo Tax Delux 2011 tax software and get error 42002: could not connect to the update site to receive the latest updates. Turbo tax support site says adjust the parameters or the rules on my security software to allow certain programs to install and works as expected. How can I solve this problem to allow updates? Thank you. CraigrH

    What is your operating system and Service Pack?

    What is your anti-malware?

  • Did not receive the last updates of Windows XP.

    Original title: update XP final

    I have not received the final updates for XP today. I tried to install them manually but can't because support for XP is completed. Is there a way I can get them?

    Yes, as of April 8, 2014, these are the latest updates for Windows XP, but since Microsoft has confirmed publicly that they will continue to develop and test the Windows XP security updates - since they are obliged under contract to the many millions of PCs under enterprise agreements including groups like the Government of Britain and the Netherlands.

    So, finally Microsoft kind of will have to offer updates for Windows XP for at least another year.

    They also distribute updates for Windows XP Embedded (plus all ATMs in the world), it is another way of development for those same updates :)

  • I constantly receive the same updates

    I constantly receive the same updates served...  I have download and a few seconds later, Microsoft Updates tells me I need to download the same update again!

    AHA! .NET Framework. Do what I recommended here but it goes the .NET 4 updates and cleaning.

  • My pc cannot install this update received the automatic update system (KB2564958).

    Hello

    My pc cannot install this update received the automatic update system (KB2564958). Each time you start my system, a necessary update is displayed in the taskbar, but after installation and reboot of the system, this update appears once again, which indicates that the update has not been installed.

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • I was not able to receive the Windows Update since February 2012. I have a Code error 80070005.

    Error code 80070005

    I was not able to receive the Windows Update since February 2012. I have a Code error 80070005. What can I do to fix this?

    Hello

    Have you made changes on the computer before this problem?


    Try the following Microsoft article and see if it helps.

     
    Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update: http://support.Microsoft.com/kb/968003 
    Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  • I have yet to receive the KB2286198 update

    I got a few other updates 09/28/10, but not the KB2286198 update. Is it delivered in phases? I have just conducted an audit of updates and has still not received

    I use Vista Home Premium 32-bit with SP2 for Vista

    Open Control Panel > programs and features. Now click the link view installed updates in the left frame.
    KB2286198 showing that contains?
    Was workaround in this Microsoft Knowledge Base article already integrate? MowGreen Services update - consumer safety

  • Area 51 ALX - does not start after the BIOS update - still in warranty

    I was preparing my Area 51 ALX for Windows 8 (pre-ordered and expect it to be here Friday) and decided to update the BIOS to the A10 A11. Back on and now it just sits here with no output monitor and my keyboard/mouse TactX™ is not illuminated either. Fans seem to be 100% / 70%. I tried to reset the CMOS and nothing. I'm just here? The office is still under warranty until next February, I believe. I am disgusted seriously now because I looked forward to Windows 8, "Painkiller hell &.

    "and to get some done coding. What a a day of . Don't know if this can help my case but I have been a customer for a long time from the time of Dell before. Had an old P2 Area 51, bought the m11x at launch and was still in talks with Ross Anthony to make a site of 'history' (although never, he eventually happen). I'm sure that set my m11x Win 8 will not work because it is stuck on super old graphics drivers. Can someone from Dell please help me here? Also, if I'm , is it possible to simply replace the motherboard myself? There are lots of tips on eBay.

    At this point, there is a strong chance that the motherboard is brick and needs to be replaced. Fact he complete the update of the BIOS and restart on its own, or force you the reboot?

  • I have controls Pro does not receive the volume update on the evolution of the patch

    Hello

    An I-controls Pro connected USB sending volume updated MainStage;  but does not not not the volume update on the evolution of the patch

    What is the tric?

    I have a screen midday traffic, MainStage send nothing

    Thanks in advance

    Best

    Cyril

    P.S. I have controls Pro receive volume update logic in mode 'Logic control '.

    Hello

    Depending on how you have all put in place, it should simply be a case of select controls in Layout Mode and choosing the correct MIDI port in the box "Send value to ' in screen control inspector

    TDC

  • I received the following updates several times and they always fail to install, they are KB949074, KB2656353 and KB2656370. How can I fix it?

    Receive automatic updates and there are three that will not be installed?   They are KB949074, KB2656353 and KB2656370.   I needs Blons them or should I solve the problem?

    Hi sgmillersr,

    ·         Did you do changes on the computer before the show?

    ·         You are able to install other updates successfully?

    ·         You get the error message?

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

  • Did not receive the security updates June 2016 for Win7 Pro.

    Two of my three PC Win7 Pro received June downloads security on 15 June.  My third pc from today (July 1) did not get these downloads. The last time it was in May.

    I told Win. updated LOOK for downloads but it sets just there saying looking for UPDATES.  I waited an hour long, but nothing happens after that research, keep just on & on.

    Please note... I have no problem to download other applications.

    I wrote the numbers of June security update KB of my other PC.  Where can I download them manually?

    Try the following: manually install the client June 2016 update rollup package, including a new version of windows. Earlier versions may not manage patch day KB3161664 June. This would be a solution for now to install it manually, but with a high probability of the issue of his return on the day July patch.

    https://support.Microsoft.com/en-us/KB/3161608

    Before you install the updates manually, the value of the automatic updates to 'never check updates' and restart to avoid any research activity to interfere in the background.

    Best regards, VZ

  • My processor do not receive the necessary updates

    When I try to manually update my cpu running windows 7 64-bit xp... It doesn't let me do it says my windows 10 upgrade is ready to install and for me to reboot to start... Well don't necessarily want windows 10... but I restart and it does nada... So I clk on search for updates and it told me the same thing. Please help on my end... done all the troubleshooting to windowsupdate. restarted. still does not work... Help please...

    Update: it is now much simpler to Windows Update.

    Microsoft doesn't have a single update to Windows 7 in the whole of 2015 that improves your computer or Windows 7.  It would be unwise to expect that they will never again.

    I'll make the presumption that Microsoft will be at least honest enough to not dress up Windows 10 updates of Windows 7 computers that are labeled security.

    So, my recommendation on how to manage the Windows Update process everything became easier.

    When you manually start Windows Update, and it presents its list for you:

    In the Windows Section of this list, right click and hide each Windows Update which is not labeled security.

    This way you will keep Windows 7 as secure as Microsoft is ready (and engaged) to provide, but cannot sneak Windows 10 in your computer.  You don't have to keep track of lists or get updates to this list.

  • Beta iOS provisioning profile but remove the software update still shows a update available

    If I open the software update menu, then it shows that my iOS is updated.

    How to get rid of the '1 '?

    Thank you!

    Normally, resetting the device should solve the problem.

    Reset: hold the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  • My question is, why I am receiving the old updates in windows update?

    I installed SP1 & SP2 one after another of the Microsoft site, after restoring my computer to its original settings, and now I get this old updates in windows update, are not they suppose to be in the SP1 & SP2? What should I do?

    THANKS :)

    Have you installed them?

    Start - type in the search box-> WinVer find upstairs and double click on it - would you say SP2?
    Rob - bicycle - Mark Twain said it is good.

  • Receiving the same update to Windows notifications for updates that are installed on several times.

    Updates, I keep getting notices to install are as follows: (I have already installed these updates several times more)

    Update of security for Microsoft Office 2007 Suites (KB2760411) 7.7 MB

    Update of security for Microsoft Office 2007 Suites (KB2760588) 7.5 MB

    Update of security for Microsoft Office Excel 2007 (KB2760583) 7.7 MB

    In the past I used CCCleaner to coolnes the regeistry, but it was not for awhile (2 months)? I have noticed that this condition yesterday.

    See: http://blogs.technet.com/b/office_sustained_engineering/archive/2013/09/12/september-2013-public-update-update-targeting-for-microsoft-update-wsus-and-sccm.aspx

Maybe you are looking for

  • portable 1b02AU: don't forget light or administrator password

    I forgot my administrator password. pop up displays "system disabled" (67708359).

  • Reinstalled XP, audio does not work

    I use a laptop Presario V2000, and I can't get the audio drivers or chipset to work. I get getting failure or inconsistent messages when I try to install from the disc or use the drivers that are supposed to be for my computer from this Web site.

  • Windows 10 devices cannot access the router settings (R6250) page

    So, after several hours of troubleshooting (reset the router, firmware flashing, try several devices) I think I discovered why I get the message '192.168.1.1 refused to connect': 10 Windows. All devices not - 10 Windows can connect to Settings page f

  • Change of the direction of travel of an indicator

    I have an indicator that I use for the validation of a number of results and she has a scroll bar to allow the user to scroll the indicator lines. One thing I noticed is that when I write this indicator, the first line written in it is placed at the

  • Configuration of webcam

    Someone knows how to fix a side by side configuration of the laptop webcam on HP laptop computer computer 2000?  I'm trying to use my cam to take pictures and I get an error message that says: "the Application failed to start because its side by side