Sometimes it prints perfectly, sometimes it prints overnight and sometimes not printing.

I use EPSON LX-300 + II printer with Windows7 Professional (32-bit) OS.

in those days he became a hard to print using it... at the beginning, it ceased to print MS-Office files and after that stopped printing my office files that will be printed using the LPT1 Port.

Sometimes, the time will be 3 to 4 hours, sometimes, it will be the next day and sometimes not printing.

When checked in the 'devices & Printers'--> which is... the printing of the document will be sent for printing, but no print is generated.

so kindly help me to overcome this problem.

Hello Perugudayanand,

You can try to uninstall and reinstall the printer software and see if that helps fix the problem.

Follow the below link to do the same.

https://files.support.Epson.com/htmldocs/CX11NF/cx11nfug/dwnh_6.htm

I hope this helps. Otherwise, feel free to write us back for assistance.

Thank you

Tags: Windows

Similar Questions

  • HP Officejet 4620: Printer is in"error" and will not print, even though the computer says that it is "connected".

    My printer recently started telling me it was in a State of 'error' and could not print my documents.  Sometimes I could turn off the printer market and all that was trying to print would then print, if documents or Quicken checks.  Now I can't print from the computer at all, or it will print checks from Quicken even if I turn the printer power off and power on.  The HP Web site indicates that it is connected.  It is the second computer from HP Officejet 4620 of the original that I bought.  The first has a problem that has been covered by the warranty, and this one doesn't seem to be much better.

    Hi @Janilynn,

    Welcome to the HP Forums!

    I read your post and wanted to help.

    I understand that the printer does not print when the computer shows that it is connected.  Please run the print and scan the doctor.

    I would like to know if it solved the problem or gives you an error message.

    If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

    Kind regards

  • I don't have a fax machine, but get a fax message when I try to print something on the internet and can not get rid of the pop up so how to fix?

    I have dealt with this problem about a week. I turned off the computer completely overnight, but it does not correct the situation. I can't print anything the Internet as long as the fax message is out there. I don't have a fax machine and do not want a.

    What is this message onfax?
    Difficult to understand how this is a problem of Firefox support Firefox doesn't have any fax machine capabilities.

    By chance, do you have a printer all-in-one that can receive a fax message? Printer, scanner and Fax combined.

    If so, try looking in your owner's manual for this all-in-one knowledge how to print this message. Or view a support forum for this all-in-one printer of brand.

    Maybe your problem is with the functionality of Scan and Fax in Windows 7?

    http://Windows.Microsoft.com/en-us/Windows/faxing-FAQ#1TC=Windows-7

  • Satellite U305-S7432 freezes and does not sometimes using Win XP

    Hello.

    I have a portable Satellite U305-S7432.
    Initially, it came with Vista, but I reformatted with XP Pro. I have installed all updates up to service pack 3.

    My problem is that sometimes when I try to restart the computer, simply, it freezes and does not meet any entry. I noticed that this happens if I close and then open the cover (which means that the computer goes mode sleep entry and returns).

    Please note that the splash screen works perfectly well and the computer wakes from sleep fine but then when I try to restart, the computer will simply spend time instead of restart.

    If it goes into sleep mode, reboot takes place as planned.

    I installed all the drivers and there is no question mark in Device Manager. I've updated the latest chipset from Intel (for the mobile 965) driver as well. Finally, I also tried to add /forceresetreg my Boot.ini file (as suggested: http://support.microsoft.com/kb/822624) but nothing helps.

    Any ideas?

    It is a series of laptop computers Toshiba us and you should check the Toshiba driver page for available drivers:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

    If you will not find XP drivers for this page, then you can try to install unique drivers for Sat U300 since European Toshiba page but I not quite sure if these drivers XP will work on you Sat U305 Mr. but it s worth a try!

    Good luck

  • OfficeJet 5740: Cannot print duplex automatically and can not connect wireless

    So, I recently bought a new laptop for academic purposes. Back in September, I bought the HP Officejet 5740 because it could print wireless and can print double sided also.

    Everything worked perfectly fine when I was using Windows 8. In microsoft office, that I could see the option to print double-sided and had no difficulty, printing or the connection to the wireless printer.

    Then, I upgraded my computer to windows 10. I downloaded the hp driver and tried to add the printer several times and did not get it to connect successfully. Moreover, I see more two-sided printing option. I have the option to print one, or to manually return the documents to make it double sided.

    I downloaded the driver installed the printer and uninstalled the printer a LOT, a LOT of time with nothing doesn't. Please help me. I really only print in powerpoint and word, so it is very important to have this ability.

    For the connectivity problem, I would say the Print and Scan doctor, you can download it from HP to http://www.hp.com/go/tools.

    For the duplex issue make sure the duplex module is selected.  Click on start, devices and printers, click with the right button on the Officejet 5740, select printer, device settings, both installable and set properties automatic duplexing on installed unit, apply, OK.

  • PC Windows Vista stops unexpectedly. Sometimes several times a day and sometimes not at all.

    My Windows Vista PC completely stops unexpectedly and without warning. Sometimes several times a day and sometimes not at all. When I turn it back on, sometimes I have a blue screen that tells me that the PC has experienced an unexpected shutdown and communicate with my local technician. However when turning on, I am always able to return to my office. My anti-virus support told me that it is not related to a virus. Help!

    It is likely some equipment or device driver issue (although we can not entrierly a problem of software).  I need a lot more information on this blue screen - EXACTLY what it says Word for Word with all the codes.  Read the messages and follow the procedures established by the MVP of the spirit in the following thread on the Blue Screen of Death.  They should help you solve your problem. http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/8cd8362e-7d06-46FB-afd7-84d54b6a8ea7  I know it's long but a blue screen problems problem may take some time because there are so many different causes and we must find the right to try to identify the problem and then find a way to fix it.  One of the elements in his post is a method to prevent the system to reboot when a blue screen if you have the time to copy the information.  If the system is not turned off, but the screen does not stay up long, press prtscrn to copy the screen, then when the system boots to open Microsoft Paint, click on the Open box and click Ctrl + V to paste here you have plenty of time to copy the information and post it here so we can look at.  Do not forget to include EVERYTHING - it is unclear what could be of crucial importance.

    I repeat the procedures in the messages of the spirit in the link above - just follow them and answer back here with the results.  Want to make interim reports before the end of the stteps is perfectly OK - in fact, I suggest you do that so I can help guide you and maybe eliminate some of the steps because they will provide no information, that we don't already know (or will not solve the problem because of the information that we already know.

    A question, is your so hot PC anywhere on it that if you hold your hand on it, you will need to detach due to heat?  Overheating is a common cause of this type of problem.  Check that the fan doesn't work and all intake and exhaust ports are clean of dust, lint, or any other obstacle.  If this is a desktop computer, remove the cover and clean the entire interior to remove dust and lint and anything else that doesn't belong.  Make sure you do not loosen or detach the wiring or the accessories cards or RAM chips.  Don't bother if it's a laptop - it's too difficult to get inside to do a proper clean-up - just make sure that the fan is running and that the vents are clear.

    I hope this helps.  I look forward to your reply with your comments about what you did to the spirit and procedures for detailed information on the blue screen error.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

    Sometimes a web page is displayed with only text and no picures. It is not always the same site and is not always the case. If I'm going to explore for the same website that always works

    Hello

    Also try a Ctrl + F5 refresh. This allows to bring the content of the page again.

  • Satellite M40-276: sound card is shown to the registry sometimes not

    I have a sound problem. Sometimes the sound card is shown to the registry sometimes not.
    I fixed my laptop, but there is no sound card.
    Sorry for my bad English

    Hello

    First of all, I would like to know if you have problems with the sound.
    Second, check device manager if the sound card driver has been properly installed. If not then you should see a yellow exclamation next to the card (Controller)

    What you can do is download the driver of his most recent on the Toshiba site, then install it on the laptop.

  • Connectivity LAN on Satellite L20-205 works sometimes and sometimes not

    Hello

    Well im using ethernet to connect to internet. The thing is, sometimes it works, sometimes not. There are times when I can connect immediately after that I turned on the laptop, there are moments where the connection becomes available after 10 minutes of operation of the laptop, sometimes it doesn't quite work.

    However, sometimes the connection could freeze even after running for some time. Actually, its kind of voodoo magic connection to the net via this phone. It is said that the cable is connected, but there is 0 packets. It frustrates some me... so I'm wondering if anyone has come across a similar behaviour of his satellites?

    Hello

    On this path, it is not easy to say why this is happening. Good and stable connectivity LAN depends on a few different factors. You must know that this laptop can not only peripheral being responsible for this. I put t know what LAN you use (probably DSL at home), but you must also check if the ADSL modem or router is configured correctly.

    If you are free, try to connect to your laptop to some other LAN to check how it works on an independent network. I really can't imagine that LAN card or driver may be responsible for this.

    I use at home of DSL connectivity and if the router is without power for a while, it can takes about 10 minutes before I can use an Internet connection.

  • OfficeJet 6500 e709: prints w / scale on the left margin and does not print right side of the page

    Prints with a wide margin and does not print the last 2 "or 3" on the right side of the page. This occurs even when the value of the left margin to little or none.

    HP trouble shoot said there is nothing wrong and test page prints fine.  Then back to the problem so try to print.

    HI @philg2,

    I see your thoughts produce a wide margin left and right of the page is cut off. What program are you printing from, and this occurs when you print from all programs or just a particular program?

    I see your post that this is not happening when you print a test page, so I think the problem is somehow related to the driver or program that you use. Let's start with the HP print and Scan Doctor is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:

    • Connectivity:

      USB: Check that the USB connection from your computer to the HP product works properly.

      Network: Verifies that the network connection between your computer and your network is working properly.

    • Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.

    • Driver: checks the driver missing or corrupt files.

    • Device Manager: check the problems in Device Manager that could prevent printing.

    • Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.

    • Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).

    • Port Match: check the port settings for the HP product.

    • Device conflicts: check the conflicts with other drivers, such as the other brands of printers.

    • Ink issues: check the cartridges and the ink levels for issues that affect the print quality.

    • Print settings: check and adjust the print quality settings.

    • Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.

    • Scan tests: check the scanning mechanism, drivers, and registry entries.

    Source:try the HP Print and Scan Doctor for Windows

    Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools

    If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to identify the key and check mart are in the green circle.

    • If you see only the Green checkmarks (), the tool did not find any problem.

    • If you see green sides (), the utility identified a problem and fix it automatically.

    • If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.

    • If you see a red X (), follow the onscreen instructions to fix the problem.

    Thanks, I look forward to hearing back on your part.

  • Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

    Just bought a new I Pad Air 2 December 4, 2015.  IBook started with a printed blue/white background.  The next day woke to white/black print and can not return blue background.

    Open a book, tap, tap of he two, disable auto-nuit theme.

  • I have a hp D2600 printer and it not even not print test page,

    I have a hp D2600 printer and it not even not print test page,
    (2) when I was using the printer, ink color came out but not the ink empty

    Hello, IndranilDattagupta,

    Do you receive messages when this happens?

    What version of Windows are you using?

    It is possible if you have not used the printer cartridges can be dried.  Clean the printer and cartridges.

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bpd06100&cc=us&LC=en&product=59862

    Use this troubleshooting page

    http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3742933&prodTypeId=18972&supportTaskId=42457

  • How do U get rid of an element of U, sent to a printer dell 305? I tried to cancell the print job because apparently, he hung up and will not print, but I can't get out of the what.

    I sent a document of 3 MB 3 pages for the dell v305 printer. It seems to hang and would not print. I tried to cancel all print jobs, but he finds just there.any ideas on how to get rid of this work and leave the impression that if I can get other printed documents?

    Has a moderator move this thread on forum Windows for the hardware and the drivers of the feedback forum.

    Hi, dadzippytr,

    Click Start and type services.msc

    Press enter

    Scroll down to print spooler

    Right-click on the spooler and select stop

    Wait for Windows to stop the spooler

    Close the window

    Control Panel > printers folder

    Right-click on the printer icon and select open

    Click file > cancel all Documents

    Close the window

    Start > right click on computer

    Click on manage

    Select Device Manager

    Click on the + sign next to the Ieee... compatible printers

    Right-click on the driver and select uninstall

    Click on the + next to imaging devices

    Right-click on the driver and select uninstall

    Click on the + sign next to printers

    Right-click on the driver and select uninstall

    Click on the + sign next to Bus USB controllers

    Right-click on the printer driver and select uninstall

    Close the Device Manager

    Restart the computer

    Windows will reinstall the drivers

    Go to the manufacturer's website and search for updated drivers

    Don't forget to come back to services and start print spooler before printing again.

  • I had a paper get stuck in my printer 1310 series. I disabled the jam but it is still showing as a paper jam and will not display 6 documents in the queue

    I had a paper get stuck in my printer 1310 series. I disabled the jam but it is still showing as a paper jam and will not display 6 documents in the queue

    If it still shows paper jam and you know that there is no paper, just turn it works, and it should realize that there is no paper.

  • My Laserjet CP1525nw disconnects frequently and does not print. What should I do to put online?

    I recently bought a LaserJet CP1525nw color printer. Firstly, I have established a wireless connection, via a router, with an Acer PC (Windows 7 Professional 64-bit operating system) using the CD of the printer by following the guided procedure and with attention to connect the USB cable when asked me to do. The printer worked very well. Then I installed the software in the CD for the printer on an Asus PC (operating system Windows 7 Professional 64 bit) who was in another room of my house and establishes a wireless connection between the Asus PC and printer. During the installation I was not asked to make the connection with the USB cable. I was able to print from the PC Acer or Asus PC regularly. Finally, I have a wireless printer on my laptop (operating system Linux Ubuntu 12.04 32 bit) using the HPLIP software. On the PC the LaserJet has been set as default printer. Printer LaserJet printed all three PC regularly. I left the printer. The next day, I try to print but I did not do it from a PC. The printer display showed 'Ready' and the correct printer (192.168.1.7) IP address. The blue led is on continuously. However open the control panel of the printer on the PC, I realized that the printer is offline. I tried to solve the problem to read the guide to the printer, but I wasn't able to find any suggestion. PC Acer and Asus have firewall Windows is activated and installed AVG antivirus. The netbook nothing. On the Acer PC, I uninstalled the printer and do a new installation using the CD for the printer. After this operation, I was still able to print from a PC, but the next day, the printer was offline again and was not able to print from a PC. Really, I cannot understand what is happening and should deeply grateful to receive any suggestions on your part. Many thanks in advance and best regards. sdrrmit

    This article should help to keep the Wi - Fi connection and solve problems in offline mode:
    http://support.HP.com/us-en/document/c02817031

    Give the steps described a try and tell us if it helps.

    Good luck!

Maybe you are looking for

  • Print Preview error: the selected printer could not be found.

    I get this error when trying to get a glimpse of an email in Thunderbird vs 24.

  • Missing song on iTunes Store

    Hello I have an iPhone with ios 9.3.2 6 I've downloaded Pink Floyd - The Wall on the iTunes store. The album consists of 26 songs, but only 25 downloaded. Track "1-04 of the happiest days of our lives". I have synced my phone to my PC, under the late

  • Satellite A300 - 1HP Vista x 64 drivers

    Hello Since 2 days I have Vista Ultimate x 64 on my Satellite A300-1HP and I have several problems.First of all, I badly need some drivers. And to be exact I need drivers for -Sound card-Modem-O2Micro SD storage device-J' I need the Toshiba Value Pac

  • Custom DLL does not not in an executable

    I have a custom DLL that works fine when I run the Labview environment.  However, when I create an executable file, it seems that's not find the DLL.  I get an error 7.  Other times I did an executable file using the same DLL with other Labview code,

  • HP Pavilion dv7-6004ea: new SSD not recognized in the BIOS

    Hi I have a want dv7 and is currently using a 700 GB drive HARD However im upgrading to an SSD I bought a Sandisc SSD PLUS 120 GB, I cloned the HDD to the SSD, I see partitions in windows Explorer when im running HDD, but when I try to boot from SSD