Sometimes the jobs XP in workgroup cannot find the names of the other computers. No idea why?

Similar Questions

• Address IPCONFIG auto cannot locate my Ip address. Other computers on the WIFI at home have problems of "IP address conflict address" How can I fix

  Auto IPCONFIG can find 169. addresses. My IP BigPond do not answer to 169. I force the IP to get internet now. I'm trying to return to power enable all desktop computers 3 and 5 laptops (all windows) to use WIFI that we used to be able to 2 months ago. BigPond advise me to get in touch with Microsoft on 132058 and I can only do this Mon - Fri 9.00 - 5.00 which is extremely difficult so that an employee who works 12 hours. After hours of contact would be much more preferable. How can I have my computer 'automatically' identify my IP without forcing the numbers. When I force the IP on the other computers on the home WIFI network they can not access the internet due to a "conflict with an IP address. They should automatically be able to identify and define the same IP address as the primary computer without problem. How can I fix?

  It seems much more likely that the fault is in your TG782T on Windows.

  Either way, a 'normal' router will work with many more than 4 Ethernet ports (though most only have a maximum of 4 physical Ethernet Sockets) and more than 5 wireless connections.  It is therefore likely that your ISP has "customized" your device in a way that limits the number of connections - and it is probably this "customization" that gives you your current problems.  It will be a little difficult to do this via an Internet forum (rather than sitting in front of your computer), but it should be possible.

  Please specify the following sentence: "disconnect this computer and try a new computer is always the same problem as the gateway must always have this setting, this computer in IP."  What is "this setting of intellectual property?

  In the area of local connections > Internet protocols (TCP/IP), how is the 'work' computer configured?  Normally, it would set on "Obtain an IP address automatically."  What was the setting of 'alternative' that your ISP you are trying?

  The first thing to do is to get information on your work computer.  Follow these steps:

  1. click on start, and then type the three letters cmd in the run box, and then click OK.
  2. Enter the following command and press ENTER:
  ipconfig/all > "% UserProfile%\Desktop\ip.txt" {Enter}
  3. open the IP.txt file to your desktop
  4. copy and paste the text into your response.

  One of the lines in IP.txt will be something like the following:

  ... Default gateway. : 192.168.1.254

  This number is the IP address of your router.  Open a web browser (Firefox or Internet Explorer) and enter the IP address of your default gateway in the address box.

  At this point, it is possible that it will ask you a user name and password.  If you did not one, use admin as username and leave the password empty box.  If this does not work, there is a way around this, but it involves several phone calls from your ISP.

  Unfortunately, the only manual for the TG782 I could find is terribly incomplete. http://www.thomsonbroadbandpartner.com/GetFile.php?id=6978

  After login, you should see a page with a menu on the left (see p. 26 of the pdf above thomsonbroadbandpartner).  Click on the entry for "Home Network."  Unfortunately, the manual does not show the screen that appears when you enter this part of the configuration utility.  What you are looking for are the settings for the DHCP server on the router, which assigns IP addresses to computers connected to the router (no matter if they are connected by wire or wireless).

  Because the manual for your TG782T is not describe it, take a look at this, which is a part of the Linksys WRT54G Router configuration utility:http://cid-18b259158254905b.office.live.com/self.aspx/.Public/router%20setup.jpg

  Under the Network Configuration, the local IP address is set to 192.168.1.1.  On your router, the default value for this entry is 192.168.1.254.  Just under which are entered for "DHCP Server" "" starting IP address"and"Maximum number of DHCP users."  Here are the settings that you want to search.  The two critical parameters, as regards your current problem is are (1) the server DHCP must be "enabled" and "(2) the number of DHCP users Maximum" must be equal to or greater than the total number of computers that you want to connect (wired and wireless).

  Sorry I can't give you more specific instructions.  Usually, the user guide for the router will display all the available screens in the router configuration utility... but not this one.

• The other computers in my house not to see the family as a source for their internet connection network; How can I restore this connection by computers (non-hotes)?

  Since this morning, the other computers ('other' meaning other than mine, where "mine" is the one that has the connection to the router wireless connected to the internet) in my house does not "see" the family network.  In other words, only my computer has access to the internet.

  How to restore the network family when other computers are not 'see '?

  Looks like you are saying that your computer is connected to the wireless router, while other computers cannot.

  This is the router that "hosts" network, then maybe the wireless feature has been disabled somehow.

  Try restarting the router (unplug it for 30 seconds) and see if that helps.

  I hope that the problem will be solved.

  Al

• third-party computer say BUY even if I closed a cc on the other computers

  Hello, I have problems with my creative cloud. Since now, I got my apps on both computers, then I closed a connection (I did well) and tried to install creative cloud on my third computer but after installation, for example, photoshop, he asks me: buy it! so I tried to delate creative cloud over one of the other computers, and after a good cleaning (also with the help of withdrawal free of charge cc) I reinstalled healing cloud, but it is said BUY IT again... can't contact the assistance, I pay but I can't work... what could I do? Help me please! Hello, Jessica

  If you updated to Creative Cloud 2015 and some or all of your CC applications show 'trial start or buy now' in the desktop app creative cloud, or if you launch any product of CC 2015 and the pop up displays a test message window, please check this link for the resolution:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  You can have Creative Cloud installed on as many computers that you want, but it cannot be signed on two computers and you can use it on one at a time.

  If you get a new computer, simply log out of creative cloud over one of the other and log on to the new.  Connect, disconnect you and | Adobe Creative Cloud desktop app

• Do not see the other computers on the network of LabVIEW

  I have 2 computers on a network (cpu1 and cpu2) that I use for data collection, and then several computers that I don't use. I got it when I did an in LabVIEW shared variable, a "network has released" a. Once these variables are deployed on cpu1, I go to cpu2 change the shared variable in an another VI by allowing the aliasing and by accessing the address of the PSP. For some reason, I don't see all cpu1, but I can see the rest of the network.

  When I return to cpu1 and try to access an address PSP, I can see cpu1 and variables deployed, but I can't see cpu2 on the network (although I see that all of the other computers). I know that they can see themselves, I ping one of the IP addresses of the other and he delay 0ms. If you have suggestions for what to try, I'm for it! Thank you!

  Greg

  After have the right ports open and unlock the right programs, windows firewall does not prevent my shared variables!

• Im doing a sensitive web page and the height of my divs match, even if I did the math! No idea why?

  Im doing a sensitive web page and the height of my divs match, even if I did the math! No idea why? I have a rectangle of 100% with screen (1260px) with a square that represents 49% of the rectangle, with 2% margin on the right. Then the other half there is room who do the same size of the largest square with bottom margin and right, as appropriate. Yet looks like this in the browser! No idea why they do not align?

  Don't worry thereon, as soon as I posted I worked out how to do it!... Typical! I had somehow reduced the padding inside the small images! Thanks nevertheless!

• Hello, I made a site using the 3 platforms: desktop, Tablet and smartphone, but... on tablets and smartphones appears the design office, no idea why?

  Hello, I made a site using the 3 platforms: desktop, Tablet and smartphone, but... on tablets and smartphones appears the design office, no idea why?

  Hello

  Please make sure you check "Desktop Redirection" option in the properties of the site.

  Here's how to get there.

  Presentation of the Tablet:

  File > Site Properties > Tablet > check "desktop Redirection.

  Mobile layout:

  File > Site Properties > Mobile > check "desktop Redirection.

  Re-upload the site and then check out. You should be all set.

  If the problem persists, please share the URL of the site for further investigation.

  Concerning

  Vivek

• my video plays fine on the computer but the surround sound on tv sometimes the sound does not play, why is this?

  my video rendering plays well on the computer but when I play the video on my TV through the surround sound, some of the audio disappears. No idea why.

  I already checked the left and right channels and made sure my audio is in stereo format

  Maybe that's your problem:

  Re: audio missing on vimeo and youtube

• Try to plug it into the router which is already installed and running with the other computers in the House.

  My computer says "Windows cannot find the certificate to connect to the network."  This computer is working - and an administrator.  This person could not help me.  Hope someone here can...

  The 'certificate' this computer is looking for is something that is used in networks wireless business and almost never in home wireless networks.

  The following assumes that you have given to your home network wireless (SSID of the router) "name" which is recognizable as yours and different from the network name to your work.

  The following also assumes that you are using Windows XP service pack 3 and you use to control your wireless Windows Wireless Zero Configuration (WZC) adapter.

  If none of these assumptions are not correct, provide the relevant information.

  If all of the above assumptions are correct, then

  • Open network connections (start > run > ncpa.cpl > OK)
  • Right-click on the icon for your wireless adapter and select Properties
  • Click the "Wireless Networks" tab.  This is where you confirm that "Use Windows to configure my wireless network" is checked. If it is not checked, stop here - you need to identify the utility that controls your wireless adapter before continuing. a good place to look is the icons in the Notification area (next to the time display)
  • Select your network (SSID of your router) from the list of "Preferred networks", and then click Properties
  • Click on the "Authentication" tab and uncheck the box for "enable authentication IEEE 802. 1 x for this network. "
  • OK your way out.

  If "allow authentication IEEE 802. 1 x for this network"is checked, but grayed out, so you can't change it, click 'Cancel' to return to the"Wireless Networks"tab and"Remove"the entry of your router.  Then click on "View Wireless Networks", select your router, click Connect and enter your password when you are prompted.

• I am not able to connect Stor-E for the other computers on my home network

  I just bought a Stor-E but I can't connect to other computers on my home network which I think is a Netgear router which is connected to my BT home hub.

  I can access the stor-e of my laptop and pc, but cannot access the Stor-E when I go to the working groups then on my PC it calls for a Net User ID and password have tried my user id and password for my pc but this doesn t seem to work.

  Someone has an idea what I am doing wrong?

  But in general your Stor-E works correctly when you connect it directly on different computers, right?

• Problems with HP4620 not working only not with the other computers in the House

  I bought a HP 4620 for my house and it works very well with my Vista laptop wireless.  However, it does not show as an option for our office or our second laptop.  Any ideas?

  Thanks, Sunny12

  Hello sunny

  I was going through your posts and help you've been putting online...

  Answered by Mr. Aneesh, pilots refers to the software that we are supposed to install in the computer.  Thus, these drivers are available on the CD that you have with your printer...

  Now, as you begin to install, you will get the screens user friendly and just follow the instructions and proceed with the installation.

  The system, that is to say; the monitor (computers) will ask you how you are going to connect the printer to the computer...

  Thus, there are 2 methods by which you can connect your printer to the computer...

  (1) USB - this is a cable that you find in the box the printer, but you would have to buy separately.  so, if you do not, please get one of the stores.

  (2) wireless - in this type of connectivity, you do not need the USB cable, because you would then have a device called a 'router '...  And here... It is the router that establishes the communication between the computer and the printer.

  Please try the following and if you get stuck, let us know.

  Kind regards

  Ashokkan.

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give it a Bravo!
  I work for HP

• How access to the other computers in my home group

  Hello

  I create a residential group I see in the network the other computer (desktop), but this tells me impossible of there access so that nothing has change...
  or I need to access the files on the other computer, because I want to get the files (my mouse is hs on the desktop) and I have no way to get them back without a mouse...
  Help!
  Thank you

  Hello Nadine_968,

  The forum in which you've posted is for English only. Please select your language by clicking on theon the page to the bottom left, to post your question in the language of your choice. If you can't find the desired below language, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

   

  Thank you!

  Marilyn

• Siri is not displayed in the menu bar - an idea, why not?

  To http://help.apple.com/macOS/Sierra/WN/?lang=en_US#/siri-WN , I noticed that Siri is supposed to be in the menu bar. And in settings > Siri "display in the menu bar" is selected by default. But he does not appear in my menu bar. Yet it is in my dock.

  No idea why it doesn't appear in the menu bar?

  In addition, Siri has a few display bugs (see screenshot).

  

  Turn off your computer and restart.

   > System Preferences > Siri > Siri display in the menu bar

• Remote Desktop on a home network can compromise the other computers?

  Yesterday, my wife is a strange phonecall from a man claiming to be a Microsoft employee. She ended up giving him our # remote desktop, instantly the man returned and guided him 2 or three different Internet "Virus\ Back Door" Web sites, then wanted it buy software. Question: Other computers on our home network could be threaten? Now, I get a warning from firewall on my laptop even if she only gave the man his # remote desktop

  Yesterday, my wife is a strange phonecall from a man claiming to be a Microsoft employee. She ended up giving him our # remote desktop, instantly the man returned and guided him 2 or three different Internet "Virus\ Back Door" Web sites, then wanted it buy software. Question: Other computers on our home network could be threaten? Now, I get a warning from firewall on my laptop even if she only gave the man his # remote desktop

  You have a problem.  You plan your computers, financial and personal data on computers to be potentially compromised and should take corrective measures.  Confidence in that you scan all with independent scanners as well as your resident AV programs?

  See the following links for more information:

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  http://www.mypchealth.co.UK/GuideScam.php

  http://ask-Leo.com/i_got_a_call_from_microsoft_and_allowed_them_access_to_my_computer_what_do_i_do_now.html

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-security/i-fell-for-the-eventvwr-phone-scam/8e79cd60-0a09-4ED6-85b0-056230878815?page=1

  https://krebsonsecurity.com/2012/08/tech-support-phone-scams-surge/

  Good luck...

• I have two windows xp computers, you try to transfer files with wiz trasfer via cable to serial port 9-pin computer of nothingness cannot find a cnnection to each other?

  Transfer Wiz a autodetec but did not find the connection, have a new p pin serial cable, is there a way to check the connection

  Hi albert-43,

  The RS232 serial cable is different from cross-over cable. A serial cable is to hang the two components that are not the same, a computer to a router, etc. A crossover cable connects two similar items such as computers, etc. from router to router.

  You can also contact a local online techshop/search if you want to buy a crossover cable.

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.