Sometimes they have a hard time capture the image on a physical machine
Hello
Last night I had a hard time getting the image on a physical computer. The machine is a windows 200 advanced server with Service Pack 4. Last week, I was able to do it without any problem with the same thing. I was finally able to capture the image after that I went into control manual (Add/Remove Programs) and remove the agent then rebooted. Has started the process more.
The log file is attached. I'm just curious as to why the problem occurred. I used the Converter 3.0.3.
TNT
It could be a problem with the version of the converter that you use. Of the 3.0.3 release notes, in the section "problems":
New that task fails for source machine remote Windows when navigating backwards in the Conversion Wizard
When the following circumstances are present, the physical source computer does not restart:
You are remote hot cloning a source of Windows 2000 or Windows NT4 machine
The agent is installed on the source machine, but the system has not yet been restarted
You change the selection in the source and change to the original source before clicking on finish in the Conversion Wizard
In this scenario, the task will fail with an instant failure error message. The reboot is required to start the snapshot on the source remote machine service if this converter can take the snapshot of the machine.
You can try to use the 4.0 version converter and see if you can reproduce the error.
If you found this helpful, please consider naming pointsIt
Tags: VMware
Similar Questions
-
As I said, the program does not start on the first time I click on the icon. The hourglass appears for a second or two, and then disappears.
I try at least 3 times or more before the program responds.
Should I try to uninstall 17 and reinstall 16.
I have already uninstalled 17 and reinstalled.One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
See:
Create a new profile as a test to see if your profile is the source of the problems.
See "create a profile":
- https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
- http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.
-
IM have a hard time, download the trial version of photoshop
I can't download the free version of photoshop
Hi pbarker77,
Please restart your computer and then download Photoshop using this desktop Adobe Creative Cloud link | Adobe Creative Cloud.
Make sure you check the system requirements before downloading.
Kind regards
Nicos
-
I have a hard time to start the system he asks me the password for administrator or power password which I don't have
This is the code that I get when I entered the wrong password 3 times-(56448130) I would be grateful help
Thank you!Enter 49520116
Kind regards
DP - K
-
Recently, I copied some old tapes vhs to dvd (using a Panasonic dvd recorder). They have copied fine reading in the Panasonic and, fine, but do nothing in one of my Dell PC. Media player is my default player. End factory dvd work.?
Hello
Its probably an alignment problem - that is, the Panasonic is written outside of the
able to read DVD computer settings.Normally, if you want to create CD/DVD that can play on standard devices (for example
like the Panasonic) the MASTERED format should be used. Does the Panasonic
offer a choice or formats? If the Panasonic uses MASTERED, then this is definitely one
alignment problem. If the alignment can be defined in fact would cost more than the
device being aligned (if you could find someone who could actually do).I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
I have five-point-something Lightroom thing set up on a laptop and a desktop Apple computer. Both will import images from a CD or a DVD (I have my film scanned and the images on a disk). I can't change the images on the Mac, but I can edit images on the PC. What is going on? Also, when I try to export edited disk images, where are they going? I can't find them on my hard drive. Thank you!
Your entire development is off? You may be able to disconnect and reconnect. You can check this thread for more suggestions:
I was expecting an error message indicating that the development module is disabled, however. If this isn't what you're talking about, please show us a screenshot of the 'dark' buttons
Mike
-
How to add a video option to capture the image
Use a CCD camera to capture the image. I need to add the ability to capture the video image (live) so that I can focus and adjust the image and then capture it for treatment. Y at - it an option. I searched the SDK as well as the camera but did not.
I guess you want to adjust the focus see streaming in labview (correct me if otherwise). You can easily do this by using a 'acquire' inside a while loop. Use a capture button to exit the while loop and process/save the captured image.
-
JDE 4.2.1 - not able to capture the image
Hello
I use to take a photo and upload it.
According to Manager.getSupportedContentTypes ("capture"), the only Audio recording is supported if there is no camera in the Simulator (8100).
And the code depending on survey - type encoding not supported registration
Please help me capture the image
try { player = Manager.createPlayer("capture://video?encoding=jpeg&width=1024&height=768"); player.realize(); VideoControl _videoControl = (VideoControl) player.getControl("VideoControl"); if (_videoControl != null) { Field _videoField = (Field) _videoControl.initDisplayMode(VideoControl.USE_GUI_PRIMITIVE,"net.rim.device.api.ui.Field"); _videoControl.setVisible(true); } player.start(); } catch (Exception e) { System.out.println("ERROR IOException" + e.getClass() + ":" + e.getMessage()); }
Thank you
Real jsr135 support has been added in 4.6 I think.
Before that, you need to start the native camera app and use it for taking pictures.
-
I have Adobe Suite Web Premium 4.0, Adobe Suite Standard 4.0 and 12 elements of Photoshop.
Computers with Standard 4.0 just died, cannot boot and I need to move it to another computer.
The computer with Web Premium 4.0 is very obsolete and alive, hit and Miss to start the system.
Photoshop Elements is on my current computer.
I need to pass all the older machines products, (not disabled) and the 12 elements of PS to my laptop.
Don't know even where to start...
4.0 standard is currently on 2 computers, one at work and one at home (dead).
Web Premium 4.0 is currently on 2 computers, one at work and one at home (alive)
Photoshop elements 12 is on my current home machine only.
How can I go on turn off old machines and reinstallation and activation on newer computers?
Kind regards
The Turner
< deleted by the moderator >
Hi Jeff,
To make a long story short
I managed to get access to the limited WARRANTY statement today after a long session with the customer. Confusion with the login resulted from the long period of time since the purchases and long-lost information. I was trying to login to LWS with my own personal login and not the original credentials are most well-known. When I logged on adobe.com with my personal login, he showed the 2 products saved on my account, so the confusion as to why I could not access the LWS. The products were actually recorded under the account of the company under the long-lost login that I managed to pick it up today.
However, there was always a hurdle. Because we asked digital media with the initial purchase (DVD set), I was told that we don't have access to download the content. At the purchase we thought that we had to pay extra for the DVD media as an additional layer of protection against future problems), certainly never well that pay extra for disks, would be to ban content from Adobe downloads. Uh, won't make this mistake again.
So, with the discs original picked up from the office, I managed to install the Design Premium on my new computer. It seems that the only downside of the installation from the original disks vs download since the LWS is it seems I can't update anything, if I try to update just said that there are no updates available at this time. I guess that updates are no longer available, where to download the LWS is probably completely up to date with some bugs came after the media.
That said, we decided to improve the Design Premium to CS6 and I expect an answer by e-mail on their part so I can complete the transaction.
Thanks so much for your help in this matter, because without it, I would probably be laying on the ground, screaming and pulling my hair out now!
Kind regards
Them
-
Still valid to use FileJournalListener to capture the image of the camera in 6.0?
I'm having a problem with a screenshot of the app native camera on JDE 6.0 and the 9800 Simulator. I use the old 'good practices' referring to the native camera app and save a FileSystemJournalListener:
{Synchronized (UiApplication.getEventLock ())}
UiApplication.getUiApplication () .addFileSystemJournalListener (this);
Invoke.invokeApplication (Invoke.APP_TYPE_CAMERA, new CameraArguments());
}When I get a FileSystemJournalEntry.FILE_ADDED, I get the file and encode it.
Public Sub fileJournalChanged()
{
next sequence number file system will use
Long USN = FileSystemJournal.getNextUSN ();
for (long I = USN - 1; i > = lastUSN & I)< usn;="">
{
Entry FileSystemJournalEntry = FileSystemJournal.getEntry (i);
If (input == null)
{
break;
}
If (entry.getEvent () is FileSystemJournalEntry.FILE_ADDED)
{
Path String = entry.getPath ();
If (path! = null & path.indexOf ('.jpg')! = - 1).
{
We found a new JPEG image, treat it
String result = processImage ("file://" + path);
clean
closeCamera();
break;
}
}
}
do not forget the change log file number,
If we do not find the same events over and over again
lastUSN = USN;
}The problem is that the Torch 9800 Simulator choke on it. "I get randomly ' JVM error 104: Eception: OutOfMemoryError. I say randomly because sometimes after taking pictures of 3-5 successfully, and sometimes it pours on the first attempt to photograph. I've cleaned many times Simulator.
The same code works perfectly in 5.0 simulators (9550, 9530). I can take pictures until I'm blue in the face without an exception OutOfMemoryError.
I saw this method of capture an image (using the MMAPI implementation)...
.. .but I want the user to be able to have the user of the native camera of experience. Therefore, listen to JPG file was added. Is it still valid in 6.0? It is, of course, to some extent, or my photo app would not work. Is there something with log being numbered differently?
The FileSystemJournalListener is not the problem.
The exception OutOfMemoryError seems to be related sending images of native Java coding to JavaScript.
Only one problem in 6.0.
-
HPDM 4.5 SP2 - unable to capture the image
I installed HPDM 4.5 w/SP2 and have hurt captures an image of Smart zero of a HP T410 (I have not tired yet other thin clients). I did not save my old settings because I wanted to start from scratch because I didn't keep any of the old images in any case. A test of the ftp protocol and shared folder filing came back successfully by using the repository Editor.
Everything else seems to work very well as I am able to clone parameters and send a command to reboot successfully but when I try to capture and image, it fails with the following information.
2013-05-22 09:17:15 sent special to the device management gateway
2013-05-22 09:17:17 task has been retrieved by the Agent.
2013-05-22 09:17:20 capture image to the master repository.
2013-05-22 09:17:20 capture image to the master repository.
2013-05-22 09:17:20 the common task cannot run.
2013-05-22 09:17:20 the common task cannot run.
2013-05-22 09:17:20 the common task cannot run.
2013-05-22 09:17:20 the common task cannot run.
The agent update task also fails and the underside of the log information.
2013-05-22 09:43:16 reference card: master repository
2013-05-22 09:43:16 sent special to the device management gateway
2013-05-22 09:43:18 task has been retrieved by the Agent.
2013-05-22 09:43:22 copy files using the master repository repository.
2013-05-22 09:43:22 the common task cannot run.
2013-05-22 09:43:22 ErrorCode: 14031022, detail of error: could not download the file (s).
2013-05-22 09:43:22 the common task cannot run.
2013-05-22 09:43:22 ErrorCode: 14031022, detail of error: could not download the file (s).
2013-05-22 09:43:22 the common task cannot run.
2013-05-22 09:43:22 the common task cannot run.
I don't know there is a setting somewhere that I forgot, but not sure it is and was hoping someone could point me in the right direction.
Yes, the shared folder is mainly used for WES units.
Can you see something in the ftp log which leads to an error?
With FileZilla FTP Server, you can see in real time what is happening.
With IIS, etc., you will need to check the logs. -
Having problems capturing the image with 2 cameras and the PCIe-1430
I have problems of switching between my two cameras and breaking or capture images in Labview or MAX. I can switch between cameras and capture images very well so that in the Vision Development Module, but not in Labview or MAX. However, it does not work the first time I have capture an image of a port, but not after that.
This the error I get LabVIEW:
1074397150 error occurred at Snap.vi IMAQ
Possible reasons:
NOR-IMAQ: A timeout error has occurred while you wait for it
specified event. If you expect a picture, check that all the videos
data are acquired during the period. If waiting for a
signal, check that the assertion of signal occurs within the time limit
period.This error I get from MAX:
The IMAQ error
Error 0xBFF60022
A timeout error occurred while you wait for the specified event.
If you expect a picture, make sure all video data is acquired
during the period. If you wait for a signal, check that the
affirmation of signal occurs within the time limit.The following list is what I currently use:
1 card PCIe-1430
2 cameras JAI Pulnix CM-140MCL
LabVIEW 9000 f3
Vision Assistant build 20090611041452
MAX 4.6
NEITHER Vision 9.0
IMAQ 4.3
-
How to use time with the State in MODE Lab machine
Hello
I tried to use the state machine with function elapsed time so sequentially, start and stop my code. The arrangement is to start the code for 1 minute then stop for 5 minutes. I have attached the code, the problem is when I place the function elapsed time, exit the while loop it does not, on the other hand when I place it inside the loop it does not work, but it does not give the right signal to move to the next State.
Could you please take a look at my code and help me solve this problem.
Concerning
Rajab
Rajab84 wrote:
APOK thanks for your help
even with the support on start it continues to turn on the case of waiting
could you please explain the code for me, the use of the Boolean crossing, increment and equality of functions
Best regards
Rajab
Ok.. I have modded the example to stop after 2 cycles. Also recommend that you take the free online tutorials of LabVIEW.
- run the vi. case statement goes to 'initialize', shift registers are initialized to their constants. GoTo 'wait '.
- "start" = false, stay in the current state. If true, switch to the "1 min" case
- "Reset timer set off with True of the shift register (counter starts at zero). time elapsed "= false, stay in the current state (1 min). If true, goto "5 min" case
- "Reset timer set off with True of the shift from the previous case register (counter starts at zero). time elapsed "= false, stay in the current state (5 min). If true, goto "1 min" case. Also, bool crossing is the search for "true-false" function compares '5 min' to add the number of cycle.
- Once the number of cycles reaches 2, stop all loop...
-
ArcSoft Media Impression does not capture the image complements this body image top
* Original title: Arcsoft Media Impression
I recently installed Arcsoft Media Impression, which came with a film scanner to enable me to scan my old negatives (negatives, 110 and 35 mm). The problem I have is that when I capture photo software seems high crop the original image. What is captured is about 2/5 of the image as shown on my screen.
How can capture all the photo? Can anyone help?
Hello Adam,.
I suggest you contact please contact Arcsoft support
Refer
(Contact support) -
Increase the size of the hard disk on the Image of VI
Hello
Is anyway to increase the size of the HD on an image that I have already downloaded on my server ESXi (3.5)? I tried to power on to the bottom of the image, and change the size of the hard drive under settings, but this makes no difference.
I am familiar with how to change the size of HD on VMWare Workstation images. It is similar to this or is there an easier way to do it?
This image is an application server and I foolishly deleted the original of my laptop, so it's the only copy I have. So is there a way I can increase the size of HD on this image easily?
Thank you.
You have a backup of the virtual machine that you can go back? It looks like something I messed up with the partitions during the expansion.
I would try attaching the C drive of this virtual machine to another virtual machine and it turn on. See if you can use diskpart to extend the volume or if he thinks he is already extended.
For future use, with Windows Server 2008, you do not need assistance VM or even need to power off the virtual machine itself to develop the hard drive. You can simply extend the space using the VI Client, and Windows Server 2008 has features to extend hard drive built in. Goto, right-click Disk Management and select Rescan disks to see the new size of the drive. Then right-click on the current partition and select "Extend Volume" and a short wizard guides you through the rest. You can do it without interruption.
Maybe you are looking for
-
3170se Pavilion dm4 broken hinge
Hi all I have Pavilion dm4 3170se 2 years and my share of hinge laptop is broken... It is really difficult to close. I tried to shut it down, every time, I heard something broken sounds so I left everything to close. My laptop needs hinge hinge and
-
I am trying to download the great chase game fails the low loader & I get this message... This application has failed to start because nspr4.dll wasn't found.re - installing the application may fix this problem... I have installed lotsa things to try
-
network adapter, APIPA, Ipconfig, IP address
I currently have a problem of access to the internet. Earlier today, and for much of the past 3 years I had ZERO connection issues on my router, but tonight I changed everything. When I type IPCONFIG/all I find that my IP autoconfiguration service i
-
Hello! Im working on a landing page on a solar energy company, and when I try to save him, he said: JavaScript error: file '_beforeSave '.beforeSave is undefined
-
You can use outlook with contact form email address?
My site will be held in Amazon Web Services.My domain is registered at rebel.com but here no e-mail accounts.I want to use my outlook.com as my email in the contact form.However, I got a warning when I exported the HTML code on the hosts refusing to