SonicWALL NSA, using VPN client overall comments to reach network of internal resources
Hello
I have problems performing Global VPN client to work when you connect to our internal network of comments in order to reach our internal LAN Server in order to reach internal resources in a safe manner. I'm not sure what could the settings were necessary in the Sonicwall to achieve?
Our installation is based on the NSA 3600 and I installed a WLAN area in the sonicwall to enable clients to connect to the internet. Traffic in the WLAN area to our internal LAN Server is denied. However, some users would like to be able to use the wireless network in order to achieve internal resources and for that I want to use the Global VPN client. It is even possible to use of an internal network from the point of view Sonicwalls Global VPN client?
The use of the outside Global VPN client works very well
Any help is greatly appreciated and if more detailed configuration information are necessary, I'll happily give you that.
Thank you
Hi Ben,
No I didn't at first, but your answers have would lead me in the right direction, hopefully. I realized that I could create a custom GroupVPN by going to the settings of the interface to the interface that is the war in the Gulf to my wireless network.
return to results
Thank you
Cree
Tags: Dell Tech
Similar Questions
-
ASA5510 Migration of SonicWall NSA 2400 VPN/GW router
Hello
I'll need to migrate 1 router VPN/GW SonicWall NSA 2400 x to 2 x ASA5510 (need SSL - VPN, detection/prevention of Intrusion, Virus, Malware protection similar) behind 2 x 2921 Cisco ISR routers. He comes to office relocation and redesign of the network.
Suggestions or comments? It's very appreciated.
BTW:
1. difference between ASA5510 and ASA5520?
2. it's a good idea to use the Juniper VPN instead of ASA5510/20 box?Thank you
Dengming
Hi Dengming,
See the data sheets for Cisco ASA 5510 and 5520. You will find all the specs of the device and there is a feature to compare devices as well.
See you soon,.
Nash.
-
Using VPN Client coming out behind a PIX
As I understand it, a PIX can operate as a VPN endpoint for IPsec tunnels, or allow IPsec traffic to pass to the other endpoints behind him; My PIX is an end point, but there are a few users who wish to use the VPN Client to connect to outside points beyond the firewall.
Is it possible to configure a PIX to two pass through IPsec traffic AND be an endpoint?
On a related note, two customer software VPN hosts can connect to each other?
Thank you
Marc
My pix company does exactly what you posted, there is lan - lan vpn, and we again establish vpn to other companies via a software vpn client.
concerning the transmission of described video, it should not need additional acl or configuration assuming that there is no acl on the pix. a question must be noticed is that the other end (i.e. the end point of the remote vpn client) needs to nat-traversal since the local pix usually perform nat/pat.
However, the vpn directly between two clients is not feasible as its name suggests (they are the two client).
-
VPN client with overlapping of private networks?
I have a new client who needs to send us data occasionally, we normally install the Cisco VPN Client on their PC, but this client has the same private network, we.
I know, but it could be done with policy NAT on my 5510 ASA with a VPN site-to site, the customer does not want to change the address or network hardware. They have router cable with no VPN option, and they are unwilling to spend more money on this project.
Can this work if there is no overlapping of IP addresses?
Your ACL SHEEP overlaps the static NAT and SHEEP has priority over the static NAT strategy strategy, why it does not work.
Please kindly remove the following:
access-list extended sheep allowed ip 192.168.1.0 255.255.255.0 192.168.240.0 255.255.255.0
-
Remote vpn client can't access outside networks
I configured a remote vpn ASA 5510 the wizard remote vpn. Users are able to get the vpn connection and access the internal network; but IMPOSSIBLE to
access the outside network. (For the internal network, I want to talk about network behind the vpn to ASA, outside networks refers to society outside the ASA).
In short, the external network of the company has default route to the ROUTER1 points. The ROUTER1 has road for access network and a default route to the internet. The ASA has a default route to the ROUTER1 points. the ROUTER1 also has a route to the address of the user remote vpn refers to the ASA.
Hope it wise.
But I don't know if my nat statement is correct. below is my statement of nat, is there something obvious lack? There is no translation network here, routable internet addresses.
NAT (inside) 0-list of access inside_nat0_outbound
public static 111.1.0.0 (Interior, exterior) 111.1.0.0 netmask 255.255.255.0
public static 111.1.1.0 (Interior, exterior) 111.1.1.0 netmask 255.255.255.0
public static 111.1.2.0 (Interior, exterior) 111.1.2.0 netmask 255.255.255.0
networks outside the company (111.1.3.0/24; 111.1.4.0/24)
|
|
the user remote vpn <-------------->internet <--------------------->ROUTER1 - ASA - Cat6509 - inside the network
Any suggestion is appreciated.
Thank you
have you enabled "same-security-traffic intra-interface.
--------------------->--------------> -
VPN Client - connection made but not able to access resources
Hello
I have two sites, A Site with a 5510 firewall and Site B with a user with a basic internet connection.
I need the user to be able to access the PC and the servers here.
I created a so called remote access VPN and the user can connect to this Site b.
They get an ip and dns address but no default gateway.
I am unable to what whether on the network 10.255.0.0/16 ping or access any servers.
I'll post the config and maybe someone could show me what I'm missing!
Thanks in advance
I wouldn't recommend configure the ip pool in the same subnet as your internal network. Please configure a subnet pool a different ip address.
However, with the current setup, you're absent NAT exemption for these subnets:
allow inside_nat0_outbound to access extended list ip 10.255.0.0 255.255.0.0 10.255.11.0 255.255.255.0
Hope that helps.
-
Itineraries other nets will be lost when using the vpn client?
I have a very general question. I intend to implement a security solution for the extranet partners to connect to our intranet using VPN client. IPSec will close on the external interface of the Cisco PIX firewall v6.3.
Now, my consirn is, I downloaded the vpn client to test but I saw no advance settings to define what network traffic will pass through the IPSec tunnel and which will be routed normally. Is it by default all traffic passing through VPN? Is that what it means if there are other networks using their default route, they will not be able to achieve? (i.e. the Internet).
Thank you.
That would depend on how you set up the PIX. You can allow the VPN to your site and access to the Internet at the same time. This is called the split tunneling. It is configurable on the PIX, not the customer.
This link might help you get started, but I'm sure that there stronger links.
-
Cisco VPN client with internet
Hello
I have a big problem, we have implemented Cisco VPN client to connect to outside to our internal servers. My problem is that all users access to the internet while using the Cisco VPN client. We use the split tunneling, but still all VPN clients access the internet. An advisor to prevent access to the internet through VPN client.
Thank you
You said earlier that you allow split tunnel. Are you still doing that?
We would need to see all of the VPN configuration - including access lists or objects referenced - to provide comprehensive advice.
-
Vpn client access to the DMZ host
I'm having a problem where my customers who establish a VPN with Pix 515 cannot access hosts on the DMZ. VPN clients can access hosts inside network without any problems. I discovered that when I make a route to trace from a client computer that has established a VPN connection to a host on the DMZ, he tries to go through the default gateway of computers instead of the client from cisco. Any ideas?
More information:
When a client connects with the PIX over the VPN, it is given the internal DNS servers and the DNS Server internal, we have a host entry that says "www.whatever.com" 2.2.2.2 (this is the DMZ host). Customers within the network can access this host with problems, it's just the customers who establish a VPN connection. But the VPN Clients can access "www.whatever.com" using the public ip address. The problem is that if remove us the entry from the host on the DNS server so that the name of "www.whatever.com" decides the public ip address customers inside will not be able to access the DMZ host. The names and IP numbers are not real just using those as an example.
Any help would be apperciated. Thank you
You'll currently have something like this in your config file:
sheep allowed ip access-list
NAT (inside) 0 access-list sheep
This tells the PIX not to NAT any traffic from inside interface, which is to go to a VPN client. You need the same thing but for the DMZ interface, then add the following:
sheep allowed ip access-list
NAT 0 access-list sheep (dmz)
Who should you get.
-
VPN Client connection terminated
I am new to Cisco PIX and I'm having a problem with the removal of the connections. We use a 515e on 6.2 and my laptops use VPN Client 4.0 and Radius to IAS on W2K3 Server. About 30 minutes, a window appears saying "secure VPN connection is completed by a peer. "Reason: (reason unspecified peer). I've combed through the configuration settings and the settings of the Cisco and my connection on the Radius Server and am unable to find anything to help. Any help would be appreciated.
Thank you
Warren
On if the PIX515 you do a 'show vpngroup' which is the ' time max "setting configured for? If it is not configured, you can do a max of vpngroup-time for the clients of the group. You can also set the idle max here too. In troubleshooting, maybe set to 3600 seconds (1 hour) to see if you are disconnected. Then adjust your idle down time (you can set it to 0 if ever you want clients idel time out) and see what happens.
Matt
-
Hello
is it possible to install?
I have a pc and I want to connect to the Remote LAN.
PC (using vpn client) - vpn (internet)---> ROUTER1 - a vpn (MPLS network)---> ROUTER2---> SERVER site
How can I connect to a remote server? Is there an easy way?
I did the configuration of the vpn client (I can connect ROUTER1 and access a LAN via vpn with 192.168.1.x), but I can't connect to the server, even if I set the subnet (192.168.1.x) under the access list of site to site vpn (access list for traffic that must pass between ROUTER1 and ROUTER2).
Please advise! Thanks in advance.
Looks like I've not well explained.
On ROUTER1
===================
1 ACL VNC_acl is used to split tunnel, so you should include IP server_NET it NOT vpn IP pool.
2 ACL najavorbel is used to set the lan lan traffic between ROUTER1 and ROUTER2, 2 you should inlcude
IP 192.168.133.0 allow 0.0.0.255 0.0.0.255
You must change the crypto ROUTER2 ACL of the minor or the najavorbel of the ACL
The other way to is to the client VPN NAT IP to a local area network lan IP ROUTER1, in this way, you don't need any changes on ROUTER2. But I have to take a look at your configuration to make the suggestion.
-
Hello world
I would like to ask for help in order to correct a customer vpn tunnel. I'm not familiar with the AAS, so please do not laugh if I write something stupid
So I inherit one asa, which has two interface used physical and vlan more. Outdoors, office, management and management. I use my computer on the vlan management, and I can reach the computers on the desktop (192.168.12.0/24) and the branch (192.168.10.0/24). I would realize that I connect to thrught houses a vpn, and I should reach the 12.x and 10.x network as I was in these networks (due to the microsoft allowed wirewall to the local network traffic).
I inherited a vpn configuration which I added my user.
I'm trying to cite only the relevant portion of config:
SSH 192.168.99.0 255.255.255.0 management
access extensive list ip 192.168.99.0 nonat_management allow 255.255.255.0 192.168.99.0 255.255.255.0
access extensive list ip 192.168.99.0 nat_management_branch allow 255.255.255.0 192.168.10.0 255.255.255.0
access extensive list ip 192.168.99.0 nat_management_office allow 255.255.255.0 192.168.12.0 255.255.255.0IP local pool ippool 192.168.99.100 - 192.168.99.200
NAT-control
Global 1 interface (outside)NAT (management) - access list 0 nonat_management
nat_management_office list of access 5 NAT (management)
nat_management_branch list of Access 10 NAT (management)192.168.99.50 management - dhcpd addresses 192.168.99.79
enable dhcpd managementL2TP strategy of Group internal
monty password username * == encrypted nt
monty username attributes
Protocol-tunnel-VPN l2tp ipsec
VPN-framed-ip-address 192.168.99.99 255.255.255.0
attributes global-tunnel-group DefaultRAGroup
ippool address pool
Group Policy - by default-l2tp
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authenticationI quote the encryption settings, because I can connect to asa, I think that I have problems with the nat or access rules.
I have an ip local pool 192.168.99.100 - 192.168.99.200, but I have the fixed ip with the vpn-framed-ip-address 192.168.99.99 255.255.255.0
Happened when I connect and try to reach the following computers:
I can reach only a freenas 192.168.12.2, and I see in his journal that I have connected with 192.168.99.99 (vpn-framed-ip-address)
I can't reach the computers on networks, however I have two nat rules, working when I'm in the office network 99.0
access extensive list ip 192.168.99.0 nat_management_branch allow 255.255.255.0 192.168.10.0 255.255.255.0
access extensive list ip 192.168.99.0 nat_management_office allow 255.255.255.0 192.168.12.0 255.255.255.0It seems that these two nat rules do not work with my vpn client.
And it is very important to arrive at the asa with ssh through the tunnel, but I can't.
I don't know if that is the ip address of the vpn client is in the management network, perhaps one should change to another network:
for example 192.168.95.0/24
A vpn asa for Dummies or any help is appreciated.
Thank you very much
Hi Chris,
The following should help:
access-list allowed 192.168.12.0 nonat_office 255.255.255.0 192.168.90.0 255.255.255.0
In this way, returning office subnet pool VPN traffic is exempt from nat. And so you will not get the failure of RPF checking.
In addition, you must change this:
nat_vpn_office to access extended list ip 10.10.10.0 allow 255.255.255.0 192.168.12.0 255.255.255.0
(incoming traffic on the VPN remote access would come from the VPN pool.) Not your home network.)
You must have:
No nat_vpn_office access list extended ip 10.10.10.0 allow 255.255.255.0 192.168.12.0 255.255.255.0
access extensive list ip 192.168.90.0 nat_vpn_office allow 255.255.255.0 192.168.12.0 255.255.255.0
NAT (outside) 5 nat_vpn_office list of outdoor access
Hope this helps, and sorry for the delay.
-Shrikant
P.S.: Please check the question as answered if it was resolved. Do rates all useful messages. Thank you.
-
Layman to ASA 5505 vpn of the native vpn client internet, tcp 1723
Hi all
I am setting up this asa for connect users at home to my network using vpn clients from microsoft to the native address with windows xp on the internet.
This asa have, on the outside interface an ip public Internet and inside Board have set up in the network of 192.168.0.x and I want to access this network of internet users using native vpn clients.
I tested with a pc connected directly to the external interface and works well, but when I connect this interface to the internet and tried to connect to the vpn user I can see it in the newspapers and unable to connect with error 800.
Request TCP and eliminated from "public_ip_client/61648" outdoors: publicip_outside_interface / 1723 "
Can help me please?, very thanks in advance!
(running configuration)
: Saved
:
ASA Version 8.4 (3)
!
ciscoasa hostname
activate the password * encrypted
passwd * encrypted
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
the IP 192.168.0.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address publicinternetaddress 255.255.255.0
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network gatewayono object
Home gatewayofinternetprovideraccess
Description salida gateway ono
service remotointerno object
service destination tcp 3389 eq
Remote description
network pb_clienteing_2 object
host 192.168.0.15
Description Pebble client food bowl 2
service remotoexternopebble object
Service tcp destination eq 5353
Description remotoexterno
network actusmon object
Home 192.168.0.174
Description web news monitor
the Web object service
Service tcp destination eq www
Description 80
irdeto network object
Home 192.168.0.31
Irdeto description
network nmx_mc_p object
host 192.168.0.60
Main description of NMX multichannel
network nmx_mc_r object
Home 192.168.0.61
Description NMX multichannel reserva
network tarsys object
host 192.168.0.10
Tarsys description
network nmx_teuve object
host 192.168.0.30
Nmx cabecera teuve description
tektronix network object
host 192.168.0.20
Tektronix vnc description
vnc service object
destination eq 5900 tcp service
Description access vnc
service exvncnmxmcr object
Service tcp destination EQ. 5757
Access vnc external nmx mc figurative description
service exvncirdeto object
Service tcp destination eq 6531
Description access vnc external irdeto
service exvncnmxmcp object
Service tcp destination eq 5656
service exvnctektronix object
Service tcp destination eq 6565
service exvncnmxteuve object
Service tcp destination eq 6530
ssh service object
tcp destination eq ssh service
service sshtedialexterno object
Service tcp destination eq 5454
puertosabiertos tcp service object-group
Remotedesktop description
EQ port 3389 object
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
the DM_INLINE_NETWORK_1 object-group network
network-object object irdeto
network-object object nmx_mc_p
network-object object nmx_mc_r
network-object object nmx_teuve
tektronix network-object
object-group service udp vpn
EQ port 1723 object
DM_INLINE_TCP_1 tcp service object-group
EQ object of the https port
EQ pptp Port object
the DM_INLINE_NETWORK_2 object-group network
network-object object actusmon
network-object object tarsys
inside_access_in remotointerno permitted object extended access list a whole
inside_access_in list extended access allowed object ssh a whole
inside_access_in list extended access allowed object-group TCPUDP any any eq www
inside_access_in list extended access permit icmp any one
inside_access_in list extended access allowed object vnc a whole
inside_access_in of access allowed any ip an extended list
outside_access_in list extended access allowed object remotointerno any object pb_clienteing_2
outside_access_in list extended access allowed object-group TCPUDP any object actusmon eq www
access-list outside_access_in note Acceso tedial ssh
outside_access_in list extended access permit tcp any object tarsys eq ssh
outside_access_in list extended access allowed object vnc any object-group DM_INLINE_NETWORK_1
outside_access_in list extended access permit tcp any any DM_INLINE_TCP_1 object-group
outside_access_in list extended access deny icmp a whole
access-list standard corporate allowed 192.168.0.0 255.255.255.0
Split-Tunnel-ACL access-list allowed standard 192.168.0.0 255.255.255.0
pager lines 24
Enable logging
monitor debug logging
logging of debug asdm
Debugging trace record
Within 1500 MTU
Outside 1500 MTU
IP local pool 192.168.0.100 - 192.168.0.110 mask 255.255.255.0 clientesvpn
IP local pool clientesvpn2 192.168.1.120 - 192.168.1.130 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow all outside
don't allow no asdm history
ARP timeout 14400
NAT (exterior, Interior) static source any service of actusmon of interface static destination Web one-way Web interface
NAT (exterior, Interior) static source to any destination interface interface static tarsys one-way sshtedialexterno ssh service
NAT (exterior, Interior) static source any destination interface interface static one-way pb_clienteing_2 service remotoexternopebble remotointerno
NAT (exterior, Interior) static source any destination interface interface static irdeto one-way exvncirdeto vnc service
NAT (exterior, Interior) static source any destination interface interface static one-way vnc exvncnmxmcp service nmx_mc_p
NAT (exterior, Interior) static source any destination interface interface static one-way vnc exvncnmxmcr service nmx_mc_r
NAT (exterior, Interior) static source any destination interface interface static one-way vnc exvncnmxteuve service nmx_teuve
NAT (exterior, Interior) static source any destination interface interface static tektronix one-way exvnctektronix vnc service
NAT (all, outside) interface dynamic source DM_INLINE_NETWORK_2
inside_access_in access to the interface inside group
Access-group outside_access_in in interface out by-user-override
Route outside 0.0.0.0 0.0.0.0 gatewayinternetprovideracces 1
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
EOU allow none
local AAA authentication attempts 10 max in case of failure
Enable http server
http 192.168.0.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
No vpn sysopt connection permit
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-md5-hmac ikev1 clientewindowsxp
IKEv1 crypto ipsec transform-set clientewindowsxp transport mode
Crypto ipsec transform-set ikev1 L2TP-IKE1-Transform-Set esp - aes esp-sha-hmac
Crypto ipsec ikev1 transit mode L2TP-IKE1-Transform-Set transform-set
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 1 set transform-set clientewindowsxp ikev1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 1jeu ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
Crypto-map dynamic L2TP - map 10 set transform-set L2TP-IKE1-Transform-Set ikev1
inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
inside crypto map inside_map interface
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
Crypto map L2TP - VPN - dynamic 20-isakmp ipsec L2TP-map map
L2TP-VPN-card interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
IKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
trustpoint to ikev2 crypto Ingeniería remote access
Crypto ikev1 allow inside
Crypto ikev1 allow outside
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet 192.168.0.0 255.255.255.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd dns 8.8.8.8
dhcpd outside auto_config
!
dhcpd address 192.168.0.5 - 192.168.0.36 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
dhcpd auto_config outside interface inside
dhcpd allow inside
!
no basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interception
SSL-trust Ingeniería out point
WebVPN
tunnel-group-list activate
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
WINS server no
Server 192.168.0.1 DNS value
Protocol-tunnel-VPN l2tp ipsec
by default no
attributes of Group Policy DfltGrpPolicy
value of server DNS 8.8.8.8
L2TP ipsec VPN-tunnel-Protocol ikev1, ikev2
internal engineering group policy
attributes of Ingeniería group policy
Protocol-tunnel-VPN l2tp ipsec
by default no
L2TP-policy group policy interns
attributes of L2TP-policy-group policy
value of server DNS 8.8.8.8
Protocol-tunnel-VPN l2tp ipsec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value Split-Tunnel-ACL
Intercept-dhcp enable
username, password Ingeniería 4fD/5xY/6BwlkjGqMZbnKw is encrypted nt privilege 0
Ingeniería username attributes
VPN-group-policy Ingeniería
password rjuve SjBNOLNgSkUi5KWk/TUsTQ user name is nt encrypted
attributes global-tunnel-group DefaultRAGroup
address clientesvpn pool
address clientesvpn2 pool
authentication-server-group (outside LOCAL)
LOCAL authority-server-group
Group Policy - by default-L2TP-policy
authorization required
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared-key *.
tunnel-group DefaultRAGroup ppp-attributes
No chap authentication
ms-chap-v2 authentication
!
class-map inspection_default
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
!
context of prompt hostname
anonymous reporting remote call
Cryptochecksum:59b54f1d10fe829aeb47bafee57ba95e
: end
don't allow no asdm history
I ramon I guess that service policy is not applied in the firewall. So it does not not trust other than the same audience segment.
Apply like this.
global_policy global service policy.
because according to the configs old, I see that the policy has not been applied. Please let me know the results.
Please rate if the given info can help.
-
Authentication failure - 5505 8.3 configuration to windows server RAIDUS vpn client
Hello
I'm trying to put up a 5505 (8.3 running) so that I can use vpn client through the RADIUS authentication
I set up a new local RAIDUS windows box and used the ASDM Assistant and a few other installation guides the 5505.
I get the following error:
INFO: Attempt to <10.0.0.92>IP address authentication test (timeout: 12 seconds)
ERROR: Authentication rejected: failure of the AAA
any help would be greatly appreciated
Here is my config sanitized:
lit5505-02 # sh run
: Saved
:
ASA Version 8.3 (1)
!
hostname lit5505-02
no names
!
interface Vlan1
nameif inside
security-level 100
10.0.0.100 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
banner motd ****************************************
Banner motd No. unauthorized access is allowed
banner motd ****************************************
passive FTP mode
DNS server-group DefaultDNS
domain name
network obj_any object
subnet 0.0.0.0 0.0.0.0
object network lotus_notes
host 10.0.0.3
network sonicwall_ssl_2000 object
Home 10.0.0.12
network of the NETWORK_OBJ_10.0.0.0_24 object
10.0.0.0 subnet 255.255.255.0
network of the ABD_LAN object
10.7.0.0 subnet 255.255.0.0
network of the LIT_LAN object
10.0.0.0 subnet 255.255.0.0
network of the LIT_LAN_vlan101 object
subnet 10.0.1.0 255.255.255.0
network of the LIT_LAN_vlan102 object
10.0.2.0 subnet 255.255.255.0
network of the LIT_LAN_vlan103 object
subnet 10.0.3.0 255.255.255.0
network of the LIT_LAN_vlan104 object
10.0.4.0 subnet 255.255.255.0
network of the LIT_LAN_vlan105 object
10.0.5.0 subnet 255.255.255.0
network of the LIT_LAN_vlan106 object
10.0.6.0 subnet 255.255.255.0
network of the LIT_LAN_vlan109 object
10.0.9.0 subnet 255.255.255.0
network of the LIT_LAN_vlan112 object
10.0.112.0 subnet 255.255.255.0
network of the LIT_LAN_vlan114 object
10.0.114.0 subnet 255.255.255.0
network of the LIT_LAN_vlan120 object
10.0.20.0 subnet 255.255.255.0
network of the LIT_LAN_vlan121 object
10.0.21.0 subnet 255.255.255.0
network of the LIT_LAN_vlan100 object
10.0.0.0 subnet 255.255.255.0
network of the LIT_LAN_vlan107 object
10.0.7.0 subnet 255.255.255.0
network of the LIT_LAN_vlan108 object
10.0.8.0 subnet 255.255.255.0
network of the BER_vlan1 object
subnet 10.8.0.0 255.255.255.0
the LIT_VLANS object-group network
network-object, object LIT_LAN_vlan100
network-object, object LIT_LAN_vlan101
network-object, object LIT_LAN_vlan102
network-object, object LIT_LAN_vlan103
network-object, object LIT_LAN_vlan104
network-object, object LIT_LAN_vlan105
network-object, object LIT_LAN_vlan106
network-object, object LIT_LAN_vlan107
network-object, object LIT_LAN_vlan108
network-object, object LIT_LAN_vlan109
network-object, object LIT_LAN_vlan112
network-object, object LIT_LAN_vlan114
network-object, object LIT_LAN_vlan120
network-object, object LIT_LAN_vlan121
the BER_VLANS object-group network
network-object, object BER_vlan1
access list off - in extended permit icmp any one
out-in access-list extended permit tcp any object sonicwall_ssl_2000 eq https
access-list out-in extended permit tcp any eq smtp lotus_notes object
access list-based ip allowed any one
outside_1_cryptomap list extended access permitted ip LIT_VLANS object ABD_LAN object-group
outside_2_cryptomap list extended access permitted ip object-group LIT_VLANS-group of objects BER_VLANS
pager lines 24
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
ICMP unreachable rate-limit 1 burst-size 110.0.0.92>
don't allow no asdm history
ARP timeout 14400
NAT static LIT_VLANS LIT_VLANS destination (indoor, outdoor) static source ABD_LAN ABD_LAN
NAT static LIT_VLANS LIT_VLANS destination (indoor, outdoor) static source BER_VLANS BER_VLANS
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
object network lotus_notes
Static NAT (indoor, outdoor)
network sonicwall_ssl_2000 object
Static NAT (indoor, outdoor)
Access-group all-out in the interface inside
out-in access-group in external interface
Route outside 0.0.0.0 0.0.0.0
Route inside 10.0.1.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.2.0 255.255.255.0 10.0.0.254 1
Route inside between 10.0.3.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.4.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.5.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.6.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.7.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.8.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.9.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.20.0 255.255.255.0 10.0.0.254 1
Route inside 10.0.21.0 255.255.255.0 10.0.0.254 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
RADIUS protocol AAA-server litvms03
litvms03 AAA-server (inside) host 10.0.0.92
key *.
RADIUS-common-pw *.
the ssh LOCAL console AAA authentication
Enable http server
http 10.0.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set pfs Group1
map 1 set outside_map crypto peer
card crypto outside_map 1 set of transformation-ESP-3DES-SHA
card crypto outside_map 2 match address outside_2_cryptomap
card crypto outside_map 2 pfs Group1 set
card crypto outside_map 2 defined peer
card crypto outside_map 2 game of transformation-ESP-3DES-SHA
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
Telnet timeout 5
SSH 10.0.0.0 255.255.0.0 inside
SSH 10.7.0.0 255.255.0.0 inside
SSH timeout 5
SSH version 2
Console timeout 0
management-access inside
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP server 216.14.98.234 prefer external source
NTP server 204.15.208.61 prefer external source
WebVPN
internal jdr_littleport_employee_vpn group policy
attributes of the strategy of group jdr_littleport_employee_vpn
banner value
value of 10.0.0.8 WINS server 10.100.1.141
value of 10.0.0.8 DNS server 10.100.1.141
Split-tunnel-policy tunnelall
jdrcables.com value by default-field
Split-dns value jdrcables.com
IPv6 address pools no
type of tunnel-group ipsec-l2l
Tunnel ipsec-attributes group
pre-shared key *.
type of tunnel-group ipsec-l2l
Tunnel ipsec-attributes group
pre-shared key *.
!
!
context of prompt hostname
Cryptochecksum:6d1868630c83f17fe0c7de41006a1526
: end
Rich
I have checked the road conditions but missed the VIRTUAL LAN address. Sorry about that.
I'm glad to see that you solved the problem and am not surprised that the question seems to have been some incompatible in the serttings server. I think you should be able to close the thread based on your response. Give it a try.
HTH
Rick
-
PIX-Sonicwall Site-to-Site and Cisco VPN Client
I have a firewall 506th PIX with a VPN site-to site for a firewall Sonicwall 330 Pro which works perfectly. I would like to add the functionality of remote users connecting to the network using the client VPN from Cisco PIX. I'm under the question of having only a single card encryption applied to the external interface. I need the feature to have the tunnel between the site to site VPN can be undertaken on other, so I can't use a dynamic encryption card. Does anyone have suggestions or knowledge on how to achieve this?
Thank you.
You don't need to add another card encryption to the external interface. You simply add customer information to your existing card for example:
Crypto ipsec transform-set esp-3des esp-sha-hmac YOURSET
YOURMAP 10 ipsec-isakmp crypto map
card crypto YOURMAP 10 corresponds to 100 address
card crypto YOURMAP 10 set counterpart x.x.x.x
crypto YOURMAP 10 the transform-set YOURSET value card
set of 10 CUSTOMERS crypto dynamic-map transform-set YOURSET
card crypto YOURMAP 90-isakmp dynamic ipsec CLIENTS
Maybe you are looking for
-
IPhone app sounds 5 OS lost 9.3.3. Merriam Webster's dictionary, guitar tuna, etc.
-
Why Javascript does not work properly?
I'm working on a web page and try this script, but it does not work (although it works fine in IE). The code is given below: My function is: function validateNumber() { var x=window.event.keyCode; //alert(x); if(!(x>=48 && x<=57)) { alert("Please typ
-
Satellite A200-23d video card recovery
Here is someone who knows if the Satellite A200-23d was a resumption of the video card?Native video card ATI Mobility Radeon HD 2600 512 MB does not.Can I replace it with another video card?
-
Hello everyone. I'm having some trouble for my project. I would like to apply the Fast Fourier Transform on data acquired by an accelerometer. I do measures of vibration, data entry is a string it is then cut into the values of the axis 3 and convert
-
my computer is running slowy, when turn off I should wait 2 minutes... why