Sony A57 AF area spot focal point

Similar Questions

• Sliders are right-handed (pointing to the left) after I affecting the computer I want options for lefties.

  Original title: cursors

  As a left-handed user, I am frustrated with the sliders that are just given (pointing to the left) after that I asked the computer I want to left-handed options.

  As a non-tech user, I find it frustrating that the cursor does not change from right to left, or automatically at my request.

  Is it not possible to add this as a feature of the dialog box when you select handedness for the mouse buttons and other Visual AIDS?

  Thank you

  Sonia

  PS: I'd rather Win 3.1 :)

  Boyfriend sorry there is no such feature to change the cursor. It could be a design limitation.

• Whats is M.M.-2.0 Manual for Sony A57? How can I change?

  I have a month old Sony A57. I was playing with it in manual mode, took a few photos and it was fine. Then came this M.M.-2.0, the - 2.0 flashes all the time. Maybe I accidentally changed some settings. I tried to adjust the EV and nothing has changed. Look in the manual, could not find. I tried other modes of shooting, his job well as manual mode.

  M.M. is the acronym of manual meter, its just there for you inform when your photo is either going to be above or below the correct exposure. When-2.0 flashes, this means that the parameter you use (ie: open aperture, ISO, shutter speed) is more than underexposed-2.0. You can see it when you change you shutter speed, f-stop. When M.M. in the middle or 0, it means that you get the right exposure according to the measurement of the camera system.

• Location and the size of area spot within a compressed file

  Hi all

  I'm working on an authorware program in which I want to use the size of years of a hotspot location clicked to draw a rectangle. Finally, I would like to be able to change the size and position of a point of interest, and when they are packed, the rectangle must belong to the new position of the hotspot, with the new size. So far, I've been successful in a file not packed with:

  GetIconProperty (@Title; #awSizeX))

  GetIconProperty (@Title; #awSizeY))

  GetIconProperty (@Title; #awLocationX)

  GetIconProperty (@Title; #awLocationY)

  where the title is the title of the clicked hotspot. So far so good... BUT I learned the hard way that GetIconProperty() does not work in a bundled file authorware (next time I will first read the help section better!). My question: How can I get the same information in a packaged authorware file?

  
  I was watching the GetSpriteProperty() function, which should work in a bundled file. However, the hot spots aren't sprites, and I do not know what spriteproperties should I use for the location and the size of the area reactive (#awSizeX, #awSizeY, #awLocationY and #awLocationX do not work). In addition, GetPostPoint provides the position of the upper left pixel of the hotspot, but I need separate the values X and Y position of the reach to be able to use the Box() function to draw the rectangle. And I need the hotspot as well. Finally, PositionY@Title and PositionX@Title do not work for my hot spots (the value is always 0 and does not change when you click on the hot spots).

  
  I could solve the problem by making all the position values variables and the values of the size of all the hot spots, but then I wouldn't be able to change the position and size of the hot spot by dragging and by changing the rectangle accordingly.

  I'd be more than happy to hear if anyone has a solution for me.

  Thank you!

  OK, after playing with the functions GetPostPoint and GetPostSize, I managed to do something that does what I want in a bundled file.

  My solution:

  posBox: = GetPostPoint (@Title; #response) - returns a list with [x, y] position

  sizeBox: = GetPostSize (@Title; #response) - returns a list with [width, height] size

  Box(pensizeBox;posBox[1];posBox[2];posBox[1]+sizeBox[1];posBox[2]+sizeBox[2])

  Hope that helps others to identical or similar problems!

• sony camera boxes are sealed?

  When I bought a box canon was sealed.

  So I wrote to sony to ask if they their sealed boxes.

  and they asked me to go into a retail store!

  I bought a rx100 (who has difficulty focusing on near things) and the box was not watertight.

  I wondered if I had received a demo.

  Thank you all

  They are usually closed, but according to the policy of stores, they can make preliminary checks to ensure that it is not defective (a rare practice) and by doing this, they may forget to shut up.

  About the macro you are in auto mode?

  Macro mode unfortunately work Green Auto mode (you will see a green camera on the upper dial or Dial menu)

  Macro mode works in Superior Auto +, but he has a hard time understanding what you are doing. The auto attendant recognizes that most of the time, you are near.

  Otherwise, your best option is to use the manual focus to get you as close as possible.

• Where are the mouse pointer/cursor themes stored and can copy them to another computer?

  I have my own theme mouse and custom cursor, with a complete record of pointers favorite that I have used for several years. It takes a long time to copy on every new computer that I use and set up.

  Is it possible to copy these themes of pointer and keep them with the custom pointers folder, save me time setting them up again?  Or are they kept individually in the registry?

  You can try to save as part of a Pack, but I do not think the themes compress and store cursors internally as they do with wallpapers.  Unfortunately the only way I know to do what you want is to export the registry, but that only works if the new computer has the cursor files stored in the same exact path.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!

• What are the anchor points

  When to use the anchor?

  Anchors are used to reference sections of a page. They are used in the same way as regular links to URI (menus, buttons, etc.) but will take you to a place on the page (or another page).

  Anchor points are generally used on single page sites.

  David

  http://creativemuse.co

• Who think that they are able to point me in the right direction?

  Long story short, I work on the recreation and improving my plan as a leading-edge Service using the request a catalog workflow point.  I was able to recreate and strengthen the greater part of the EHR Architecture, but I am struggling to find a way to reproduce a specific domain.  Under a blueprint storage tab, you can click on a link to add more storage.  I'll assume some sort of function.  In my first attempt I have a check box that when checked will present 3 other windows to get the answer to the size, the drive letter and label. So I think I can may be able to use the link property but this is where I could use some input.  I suppose I could copy and past and keep hidden just but that sounds not otherwise effective

  Everyone understands what I really want to do and have something to share with the class?

  See you soon

  Steve.

  kumarankpl posted the link to the true method to get the owner.  Now that said when you use the tip with the application designer a vCAC point catalogue will present value and additional properties that are...

  __asd_requestedBy - the applicant owner upn

  __asd_requestedFor - the designated user upn asked for

  __asd_tenantRef - name of tennent (vsphere.local)

  __asd_subtenantRef - tenent GUID

  __asd_catalogRequestId - GUID for the record in the query in the database

  Knowing that these variables will come from vCAC to VCO when request arrives using the designer I created an action that is the first thing of the workflow that runs and gets the vCAC presented VCO

  See if you have this folder of actions... com.vmware.library.asd

  If you don't, here is the command for stocks

  Return System.getContext () .getParameter ("__asd_catalogRequestBy");

  See you soon

  Steve

• Gradient focal point

  Hello

  Is there a way I can make the center of the highest point of Sun is more under the Dove?

  I fiddled with the options in the gradient panel, but nothing.

  Thank you!!!

  Esther

  

  

  It is always wise to indicate what version of Illustrator and what OS you are using.

  Select the gradient tool. Click-drag with it... from where you want the Center.

  If you are using CS4 or better, by selecting just the gradient tool will show degraded Annotator, you can then adjust the Annotator instead of click-and - drag.

• Batteries Sony 30A 18650vtc5, are these authentic?

  Photos Ordered some batteries and received them recently, they seem a bit broad compared to previous batches, I received. Someone can confirm if these are legitimate vtc5 batteries or not? They seem to be brilliant (you can see the reflection of my fingers in there).

  Hello Brian,.

  We have found no information about this battery, you can check our website of parts for batteries officially published at https://servicesales.sel.sony.com/

  If my post answered your question, please mark it as "accept as a Solution.

• I have 2 laptops. I get messages from Microsoft WIN 10 and 365 personal Office located on the Sony. They are not. Technician?

  My Sony is no longer functional. I need Microsoft to fix. I don't have any idea what went wrong.

  Hello

   
   
  Please contact Microsoft Community.
   
  Please confirm some additional information to help you better:
   
  1. What is the exact message that you get from Microsoft. ?
   
  2 is installed on two laptops to windows 10. ?
   

  3 is it these laptops synced with one player. ?

  Office 365 family working on 5PCs/Macs more Tablet/iPad

   

  You can advise to refer; Secure devices FAQ

   

  http://Windows.Microsoft.com/en-us/Windows-8/what-is-trusted-device

   

  He wants to withdraw from the Sony computer in his Office 365 subscription list to do this. It can remove the device by logging on the Microsoft account and remove unwanted registered devices list.

   
   
  Get back to us with this information and we will be happy to help you further.
   
  Kind regards
  Anusha

• Translate the focal point of a radial gradient?

  Hello

  Working from the great response in this thread, I'm trying to move the center point of the gradient of an object. Here's my test code:

  var idoc = app.activeDocument;
  var ipath =  idoc.selection[0];
  ipath.translate(
      100, // deltaX
      100, // deltaY
      false, // transformObjects
      false, // transformFillPatterns
      true, // transformFillGradents
      false // transformStrokePattern
  );
  

  Unfortunately, nothing I have try actually works.

  Anyone know what the trick is to place the origin of a radial gradient?

  Thank you!

  Why don't you use the code in the great response this thread?

  you left out some vital lines

  // transform gradients findings
  // select a path item with a gradient applied to it before running the script 
  
  var idoc = app.activeDocument;
  var ipath =  idoc.selection[0];
  var fillcolor = ipath.fillColor; 
  
  ipath.filled = false; // remove previous gradient transformations, to be able to apply new ones ?? 
  
  ipath.fillColor = fillcolor; // re apply the same gradient color, without transformations.
  ipath.fillOverprint = ipath.fillOverprint; // without this, the gradient won't move or scale, but it does rotate ?? 
  
  ipath.translate(
      100, // deltaX
      100, // deltaY
      false, // transformObjects
      false, // transformFillPatterns
      true, // transformFillGradents
      false // transformStrokePattern
  );
  

• Focal point of magnetism?

  Hello

  I m french and my English is not Oxford

  So here's my question:

  How to create cue magnetism (point) on a layer to accurately place a drawing which is on the second layer?

  I have a drawing with checkerboard on a layer and I would define a second picture on it (some magnetism on intersection for ex)

  It of possible with illustrator, but I want to know if possible with it s soft first

  I don't know if I m clear, if not tell me one more time I'll try to find native English to help me formulate my problem.

  Thx for your attention

  First, there is no snap to guide lines of all kinds.

  Better is to do that in AI or Ps then put in PR.

  or set the zoom to 400 level and use the tilde key in the program for a precise positioning monitor.

• When Outlook-Mials convert to PDF, all images are displayed as points of mark - what can I do?

  Every time, when I convert a .pdf Document file a Mail in Outlook all the images in the messages are displayed in the form of questionmarks.

  This happens thanks to the Outlook Add-In, and also when I use Adobe Acrobat directly.

  Anyone who knows the solution to this problem?

  Best regards.

  Down below is a screenshot showing the problem.

  

  Hi goekhane95112936,

  You may need to click on tab of Adobe PDF in Outlook and choose "change Conversion settings.

  Now, uncheck the box 'Download external content block' option on the settings tab and see if that helps.

  If this is the case, then remember to turn it back on again once you have finished.

  Let me know.

  Kind regards

  Ana Maria

• Are from all points of view dynamic performance actually views of $ V_?

  DB version: 10G
  
  All dynamic performance views actually start with V_$? The views V$ (without the underline in the meantime) regularly access we are in fact synonymous to views V_$. Right?

  The views V$ are actually public synonyms for corresponding SYS. Views V_$.

  To list all views of $ V on your system:
  SELECT name from V$ FIXED_TABLE whose name like ' V$ % ';