Sony camera and the memory card

I imported a number of photos of my Sony Cyber Shot DSC RX 100 to my Windows 7 photo gallery. Somewhere in the process, I shot some of them. I imported directly from my memory card. Now when I try to view pictures in my camera, it says "cannot display" - the error message also said on another "unable to turn" screen. Does anyone have any ideas about what happened and I can recover these photos in original size on my card?

Looks like you did with the camera connected to the computer and Windows to change the format (turn).  I don't think you can export these back to the camera.  With the large capacity memory cards, I suggest you not to change the pictures on the memory card and keep for a while before deleting.

Suggestion:

Do not connect your camera to your computer.  Buy a memory card reader - they are inexpensive.  In fact, most modern computers have a built-in SD card reader.   Remove the memory card from the camera and insert it in the drive.  Connect the player to your computer and treat it like any other thumb drive USB.  The card reader is small and fits easily in your case of the camera, much better that the cables and such.

Much faster, without fussing over the drivers, no battery worries.  This also means that you don't have to install anything on any computer to be able to copy your photos.  It also lets you remove the lightening fast compared to in the camera memory card.  Most of the software that comes with cameras is terrible.

Tags: Windows

Similar Questions

  • Appeare photos and videos have disappeared to a destination and the memory card folder after a halt during the transfer.

    I was downloading photos and videos from a memory card to camera in a USB card reader. After that most of the photos and videos (about 245 to 249) have been downloaded, asked me to jump on the last bit. Now, no pictures appear in the folder where I kept them or on the memory card. I get an error message when I try to eject the card reader. How can I recover pictures, because this is my only copy?

    Hi JanetSmart,

    • Have you tried plugging the card on another computer to see if it works fine it?
    • What is the file format of the file 29?

    It could be a virus, I would also say that you download and run the latest Microsoft Security Scanner to scan the card and check if it helps:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Response so that we can better help you.

  • updated my vivaz and the memory card is locked. How to unlock it?

    Hi, I've updated my vivaz last night and I had no memory card because I didn't lose anything. When I put my card back in, he says its shoreline and enter a password. I never put a password on the memory card so how can I sort this and why did do it?  It's not the 8 gb original you have got with the phone, it is a 16 GB san disk. Could someone help me with this please?

    Should I qualified before, is that the update the phone does not affect the memory card based on its contents, but in some cases like yours, there is blocking it. Yes, the Vivaz is compatible with 32 GB cards.

  • BlackBerry Smartphones and the memory card applications

    is there a way to downloap applications on the memory card and run those apps on the card?

    You can for some applications only and it is a minority, as most of the applications cannot be implemented with external memory

    Example is recipes Halloween BEIKS for BlackBerry

    Snip http://appworld.blackberry.com/webstore/content/4121

    This product is specially optimized for minimum memory requirements and optimal access speed. It can be installed on a primary or on a media card extension and once installed memory, do not require or use the network connection.

  • Phone smart BlackBerry Smartphones and the memory card appears not

    I have a Storm 9530. When I synchronize with the Fund Manager for this. When I try to upload music, it says please insert a memory card and you reconnect to your computer. I have a card in there and have tried 3 different ones. It also displays all the icons on my desktop Mac blackberry. Card appear in the Options of memory. Auto enable mass storage Mode when connected is set to NO, is this true?  Thank you

    Hi dbond,.

    Try setting Auto enable Mass Storage Yes and defining the MTP (Media Transfer) Protocol to disabled. This article should provide more information. http://bbry.lv/rqhkNV

    I hope this helps.

  • Diffrence between import of the disc of the camera and the memory (LR 3.3)

    I noticed there is a difference between import in Lightroom 3.3 for a card reader from the import of my Canon 5 d Mark II. The camera has build fixed the goal and when I import from the camera I don't have to use the lens correction feature Lightrooms. But if I import from a card reader the optical correction of cameras is lost and I need to use the correction lens lightroom provides. What is the explanation for this? Is there anyway that I can import my photos from a card reader with losing them the optical correction of cameras?

    I think that what you are experiencing is not the difference between the import from camera or card reader import, but the difference between working with Raws and working with JPEG files. The camera lens correction only applies to the JPEG made by the camera and no not the Raw file.

    What are your settings in the preferences-> "treat JPEG files next files to raw as separate photos? You are shooting Raw + JPEG?

    Gossweiler beat

    Switzerland

  • I tried to copy the pictures from my digital camera on computer memory card and now I can not find them, and they have all been removed from the map. What should I do?

    I inserted the memory card from my digital camera in the slot on my HP laptop.  I went into my computer and 'file' tab and press "copy".  He asked a folder name called 'Photos '.  I then went in the 'photos' file and it says it's empty.  I then inserted the memory card in my camera and were not the picture about it.  I am so upset... There are 665 photos that can never be replaced.  What should I do?

    Hello

    The operating system that you are running on your computer?

    You may have set the option "Erase after importing" when importing the photos. At the end of the import process, then pictures should appear in the Windows Photo Viewer.

    Open the Windows Photo Viewer and check if you can see these photos.

    Check this link for more information:
    http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-digital-pictures

  • inserted my memory card in my camera and the computer corrupted all the photo files and video.

    lack of downloaded photos
    I inserted my memory card in my camera and the computer corrupted all the video and photo files.  How can I recover them?

    No guarantee... but the following freeware may be
    able to recover the files to your memory card.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Recuva - file recovery
    http://www.filehippo.com/download_recuva Introduction of Recuva (tutorials)
    http://www.Piriform.com/docs/Recuva/introducing-Recuva

  • Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

    I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

    If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

    Lightroom Journal | Tips and advice straight from the Lightroom team.

  • When I put my memory card in from my video camera that nothing happens, how do my videos now that I don't have my camera, and the Tower not responded to my card?

    I don't have my video camera but I don't have my card memery with video always on it, when I put in my tower where the memory card reader is nothing happens I have no I have idiots on what to do, but the light on the Tower beside the drive when I put the card in what the hell happened?

    Hello
    See if the card has memory of a lock switch on the side it... just turn off the lock.
    I hope this helps!

  • my memory card for my digital camera does not work when I put it in the memory card slot

    I use vista and a emachine El 1200-07w. It worked last week I just stuck the memory card and a menu pops up saying what are the options I could do (for example, open the folder, etc.) now, when I put the memory card in nothing happens, but if the memory card is in when the computer is turned on, then he will say new hardware detected but it can't find a driver for it. Why is it does not work now, but was last week and how the hell can solve this problem. I have no software for my digital camera, I always just went out the memory card it stuck in the memory card slot and it was very good. It's just a less expensive memory card (Lexar) I have a 2 GB and 128 MB and will no longer work. Thanks for any help!

    Hi, I hope you can follow this. Remove the storage card from the computer, then go to control panel
    then
    Device Manager
    Expand portable devices
    the type of memory card slots should be listed if your type is a yellow triangle in it,
    Right-click on it and choose uninstall.
    It should reinstall it automatically or when you put the memory card in the slot.
    This type of fault is often caused by not using material on the taskbar does not safely remove request.

  • Can not copy the database of res folder and write to the memory card

    I developed a small application using blackberry jde 7.0. I want to copy the database (.db) of res folder and write to the memory card. When I run in the Simulator, it throws exception "FileNotFound". But the file is located in the res folder.

    Help me guys...

    Here is the code

     copyFile("/Demo.db","file:///SDCard/Databases/Demo.db");
    
    //Copy to Memory card
    public void copyFile(String srFile, String dtFile)
    {
    try
    {
    FileConnection fconn;
    fconn = (FileConnection) Connector.open(dtFile,Connector.READ_WRITE);
    //if(!fconn.exists()) // if file does not exists , create a new one
    // {
    // fconn.create();
    // }
    InputStream is = (InputStream)getClass().getResourceAsStream(srFile);
    System.out.println("read" + String.valueOf(is.available()));
    OutputStream os =fconn.openOutputStream();
    byte[] buf = new byte[is.available()];
    int len;
    while ((len = is.read(buf)) > 0)
    {
    os.write(buf, 0, len);
    }
    is.close();
    os.close();
    }
    catch(IOException e)
    {
    System.out.println("Exception"+e.getMessage());
    }
    }
    

    The exception is

    File not found

    «When I run in the Simulator he throws exception "FileNotFound".»

    Which line is the rise of this?

    You might find the code in the sample application SQLiteDemo, which does almost the same thing, useful in the study to determine what went wrong.

  • unconsciously I blocked the memory card from my camera with BitLocker. How I unlock my card.

    in fact when I use my computer, unconsciously I clicked on BitLocker and my memory card is locked. After that I've faced some strange problems, even if my card is 4 GB and free space is 3.18 GB; While it shows that the memory card is full. Please tell me how could I unlock my card?

    Hello

     
    What is the brand and model of the memory card?
     
    I suggest you to refer to the links and check if it helps.
    In Windows 7 BitLocker Drive Encryption: frequently asked Questions
     
    How to use the BitLocker Repair tool to help recover data from a volume encrypted in Windows Vista or in Windows Server 2008
    Note: Also applies to Windows 7.
     
    See also:
    BitLocker Drive Encryption

    If the problem persists, try to disable and re-enable Bitlocker.
    Steps to follow:

    (a) click Start and then click Control Panel.

    (b) click on security.
    (c) click BitLocker Drive encryption.
    (d) if the user account control dialog box appears, check the action proposed is correct and then click on continue.
    (e) click on disable BitLocker.
    (f) click on disable BitLocker.
    (g) in the window of the BitLocker Drive encryption, click on turn on BitLocker.
    (h) close to the BitLocker Drive encryption.
     
    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.
  • Sony A57 will not get past the screen saying written on the memory card has not been completed correctly

    He put in service, took a couple of pictures, he started acting funny then it poped a message written on the memory card was not completed correctly, if you press on enter it goes to the next screen. Press ENTER again it goes back to the first screen. Someone has an idea

    Thank you, a new memory card sets, I was worried cause I couldn't get to the menu screen. If other people have this happen, say that you can't in front of screens to reformat, a new sd card should do the trick

  • images dialog box is empty when you insert the memory card

    This is after you have inserted a card high capacity in the player, which hung the memory slot.  Now just insert a regular memory card, the dialog box appears, but there is nothing in it.

    Sorry if the info seems confused but maybe the
    answer is here somewhere.

    FWIW... There used a similar problem with a Sony memory
    Stick... the solution is to insert the stick into the drive and
    Restart the computer... somehow this would reset the
    stick.  I don't know if it will work for you.

    You may also check your AutoPlay settings...
    If you insert the card and go to... Start / my computer...
    and right-click on the drive letter for the location of in the map is...
    choose... Properties / AutoPlay tab...

    Choose... Mixed content...
    Tick... Select an action to perform
    On the left, click on the default button / apply / OK.

    Give it a try...

    It is possible that your media player is not compatible
    with the SDHC technology. The best is maybe to buy
    an external drive that is compatible SDHC or download
    Unit photo using a USB cable.

    Regarding the card... have regular SD, you tried to manually
    Download the pictures?

    If you connect the device to your PC via a USB cable, turn
    on the camera... then go to... Start / my computer... it may be
    listed as a drive letter...

    If_yes_right click on the drive letter and select... Explorer or
    Open... This should display the directory of the memory card.
    You can copy and paste or drag and drop the files from there to a
    folder on your hard drive.

    (The same steps work if you have a media player...
    When you go to... Start / computer... the media slots
    Drive should be listed under... "Removable disk" with a drive
    letter.)

    Finally... the AutoPlay Repair Wizard can be worth a try:

    Microsoft Autoplay Repair Wizard
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=c680a7b6-e8fa-45C4-A171-1b389cfacdad

Maybe you are looking for