Sony camera detected on USB but not found (visible on the camera) images

I plug my Sony Cybershot, I did successfully for 4 years and now, suddenly, Win7 detects the camera as usual but said there is no images - well they are clearly visible on the camera.

"show the hidden files and folders" is perhaps not necessary, please also uncheck "Hide protected operating system files" is two or three lines under 'display files and folders '.
apply/ok to close the window
and please open it again to see if it resets.
If it wasn't still not checked then check your memory card.

Please kindly share the result.thanks

Tags: Windows

Similar Questions

  • Camera detected in MAX, but not found in Labview

    Hello

    I have a camera Thorlabs USB (DCC1645C). I installed the drivers and MAX detects the camera, but when I try to open the camera with NOR-IMAQdx, it does not appear. I also tried to open with NOR-IMAQ camera, but I could not.

    If I try with Vision Express/Vision acquisition, the camera appears, I am able to select and configure the principle of the camera, but when I execute the program there a mistake: 'not found room '.

    It would be great help.

    Thank you

    Hi AurelioSilva,

    In fact, NI-IMAQ driver is used only for materials. For the hardware part 3 (such as your USB camera), I recommend the use of iMAQdx. You can find the difference between the iMAQ and iMAQdx here: http://digital.ni.com/public.nsf/allkb/0564022DAFF513D2862579490057D42E

    Now, back to your problem. When you talk about LabVIEW 2013 (64-bit), I think that it is perhaps the issue. You see, most of the drivers like iMAQdx and iMAQ are supported by LabVIEW 2013 (32-bit) only. Don't worry, you can install and run 32-bit LabVIEW 2013 in your 64-bit computer OS cause I do this all the time with 3rd party cameras. In short, not all drivers of OR are supported on a 64-bit version of LabVIEW. You can read about it here: http://digital.ni.com/public.nsf/allkb/E9B4EA0143514DCB8625725D0050680A

    Warm greetings,

    Lennard.C

  • Corsair 3.0 slider 16 GB detected in BIOS but not in Windows 7...

    The usb works on all the other computers I tested, but not on mine. I have windows 7 Enterprise x 86 installed. In addition, it is detected in BIOS but not in windows... All solutions? Thank you.

    Hello KhurramHaider.

    I suggest that you go on the site crosair and look of the driver, if you found and installed and it STILL does not work, then there could be a problem in the operating system
    Concerning
  • all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not helping

    all the site went "not found HTTP 404 error. The requested resource is not found. "and the"Firefox cannot load Web sites but other programs can"page is not help somehow

    One possible cause is security software (firewall, antivirus) that prevents or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

    You can try to reset (power off / on) of the router.

  • Sought but not found blackBerry smartphones

    I searched but not found. This means that more probably I just looked in the right place.

    What I'm trying to find is the total number of contacts will hold the 8530. IE; 500? 1000?

    I know that each contact will be so numbers and an email address but how many individual contacts you can add?

    Hi and welcome to the forums!

    I have yet to see a credible source to publish current limits for the records on the calendar, Memo, tasks, or contacts apps. If you find a thanks for posting. I usually tell the users to keep it is manageable. For me 6 000 contacts? Seriously?

    Heck, I didn't was not stationed with 6,000 people in the U.S. Army. .

    Don't forget that the memory of the camera is a flash memory, which is designed to keep all functions of the device running at eye level. Storage of large quantities of documents just takes a lot of dynamics of memory and makes static.

    Let me know your opinion!

    Thank you

    Bifocals

  • I deleted by mistake com6 usb modem com port, now when I troubleshoot it shows no modem usb driver not found.

    I deleted by mistake com6 usb modem com port, now when I troubleshoot it shows no modem usb driver not found.

    Usually, by unplugging the USB device and plug it in then that she return to should force Windows redo the settings.

  • I have Photoshop Lightroom 5 and you have downloaded Camera Raw 8.7.1 & DNG Converter with success. I have a new model of Sony Alpha 7 11 ILÇE A7M2 which is supported by LR5. I'm still not able to see the RAW images. The message says not available ove

    I have Photoshop Lightroom 5 and you have downloaded Camera Raw 8.7.1 & DNG Converter with success. I have a new model of Sony Alpha 7 11 ILÇE A7M2 which is supported by LR5. I'm still not able to see the RAW images. The preview not available for this DSC - ARW file message says. Whatelse should I do to see my photos? Can anyone help?

    Anita

    Support for the camera has been added in the latest version of Lightroom, version 5.7.1. After you download Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom does not use plug in Camera Raw. You must ensure that you have updated Lightroom to the latest version in order to have support for this camera.

  • OfficeJet 6600. Works as a printer, but not able to start the scanner.

    OfficeJet 6600. Works as a printer, but not able to start the scanner.

    I am facing a strange behaviour of my camera. I tried to find similar problems on the forum, but did not succeed.

    I started it 2 days (near my 5610 old which seems to have problems of aging). I use a Sony VAIO PC, OS Win7-Pro, updated.

    Running the appliance following the instructions of the poster. Presents the installation CD. Wireless net was successful and the screen of the device is to give the corresponding IP address.

    But this IP has realized the configuration SW is not recognized. I tried thousands of times, switching and on different devices (router, printer and pc) in the order required, uninstall and reinstall the device.

    However, despite the property intellectual not recognized the device functioning as a "printer".

    But I need to use it as a scanner.

    Procedure by selecting the "scan to PC" screen of the device (only available as an option) I get the message "to ensure that the feature is turned on" and I am prompted to 'open the printer HP SW,... '. ».

    Go to Windows and by clicking on "HP SCAN" in the HP/HP Officejet 6600 directory I get the a warning window stating "HP Officejet unidentified 6600.

    Can someone, please?

    Thank you in advance.

    Hey,.

    Try this document! A "no computer has detected" or "Connection error" message when scanning for HP Officejet 6600 e-all-in-one and 6700 Premium e-All-in-One Printer Series (H711)

    Have a great day!

  • Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

    Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

    Hello

    I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

    Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

    See how it works for you:

    If you see a message like this:

    Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

    It is in the case Log:

    Event type: Information
    Event source: Application Popup
    Event category: no
    Event ID: 26
    Description:

    Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

    Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

    You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

    If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

    You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

    The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

    Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

    You also will be able to properly run a browser on the system afflicted to go on Internet download one.

    There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

    You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

    If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

    When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

    Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

    If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

    TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

    If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

    Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

    I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

    You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

    c:\Windows\System32

    Here is the link to my SkyDrive and you can get the file you need here:

    https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

    When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

    When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

    You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

    You then put the downloaded files in the correct folders on your system.

    That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  • STOP: c0000135 {Unable to locate component} __This application failed to start because winsrv was not found. Reinstalling the application may fix this problem.

    I have a problem with my laptop which comes to hang. Bluie screen.
    the screen show:
    STOP: c0000135 {Unable to locate component}
    This application has failed to start because winsrv was not found. Reinstalling the application may fix this problem.

    In my opinion, is due when I have T.V. Media installed on your computer. I try to use the safe mode and select disable it the automatic restart on system failure option and press ENTER. But nothing works. I have all the time the blue screen with winserv wasn't written. I try to have access to have access to safe mode or something to download, because I try to download criticism 885523 update that I download on a USB key.

    Please this drive crazy me I need your help

    You receive a "Stop: c0000135" and "winsrv was not found" error message after you install Windows XP Service Pack 2

    http://support.Microsoft.com/kb/885523

    S.Sengupta Media Center MVP

  • message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

    I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

    Hi vlademer,

    D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

    Follow these methods.

    Method 1: Follow the steps in the article.

    Problems installing and uninstalling programs on Windows computers

    http://support.Microsoft.com/kb/2438651

    Method 2: Scan the file system (CFS) auditor to repair corrupted files.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

  • svhost error: this application has failed to start because xul.dll not found. Reinstalling the application may fix this problem

    I got a message when I reboot my pc
    «svhost error: this application has failed to start because xul.dll not found.» Reinstalling the application may fix this problem.
    I need someone to help solve this problem.

    Let's see...

    I downloaded this zip file to see what was in it.  The version of the file in this download link xul.dll is approximately 2 years and version 1.9.0.14

    The version of the xul.dll of Firefox on my system (trying to keep up-to-date and all) is aged two weeks and version 5.0.

    I think I want to reinstall Firefox, but this isn't the Firefox forum.

  • Cannot run Real Player. "This application has failed to start because MSVCP90.dll not found. Reinstall the application may fix the problem.

    I'm unable to launch Real Player. I get a message saying that, ""this application has failed to start because MSVCP90.dll not found. " Reinstall the application may fix the problem. I did play several times in past three days, but to no avail. "I even installed the" install Microsoft Visual C++ Redistributable Package in 2010. as suggested by Joel S-Support Engineer at one of the similar Querys. I I am facing the same problem even after installing, so! The same dll missing or damaged.

    I even started recovery deleted files dll in the registry by using strange solutions on the Web "Recuva" but it is of no use.  I do not know! I even started thinking of reformatting the hard drive or changing into a new One.  It's very frustrating. Lately no Fortunately, I hit to the top of your site looking for answers! I'm still fumbling for answers!

    Kindly help me! I anticipate a quick recovery solution please!  Thanks Roy

    Hi Roykarnataka,
     
    MSVCP90.dll errors might indicate a problem of registry, a virus or malware problem, or even a hardware failure.
     
    Scan the checker (SFC) system files on your computer and check if it helps fix the problem.
     

    SFC analyzes and verifies the versions of all protected system files after you restart your computer.

    Check out this link to do the same thing:

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    More information is available at: (sfc) System File Checker

  • Computer not found displayed on the printer control panel. ?

    Computer not found displayed on the printer control panel. It analyzes not but prints ok. Running the utility HP scanner Diagnostic 4.2 says service Windows Imaging does not. If you ignore this message says the Twain service does not work because it is used by another service?

    Problem solved. I managed to get Windows Imaging served running afetr a lot of the research and this scanner enabled to work. Thanks, but does not need your help after all!

  • File not found error in the Welcome screen

    Help please!

    I have the exact problem described below, but do not have a folder with the same name as the volume created on the volume. Please can anyone help - I have tried everything. This problem happened when I upgraded to Fireworks CC!

    "At the launch of Dreamweaver on your Macintosh if your home screen does not load and you see an error"File not found", please check if you have a folder with the same name as your volume created on the volume. For more information about this event through the pdf document attached. Other dreamweaver dialog/panels that will be empty because of this problem are Jquery color chart, Adobe Edge Webfonts tab in the dialog manage fonts, dialog error W3c information, dialogue externalize Javascript and svn revert dialog. After having made changes indicated in the attached document, please check all the dialogues/panels affected to confirm that everything is working as expected. »

    Thank you

    This problem has been resolved by renaming current Martin of the Volume of work. The reason to get the "file not found" error in the case of Martin is because there is a folder inside the current workload that has the same name as the Volume itself (the name of the "system" folder. Please refer to the screenshot above).

    @cabolivar, can you please check if you have any folder in your root folder which has the same name as the name of current workload? If it's confusing, please post a screenshot as Martin. Try out us and solve it for you.

    Thank you

    DBC

Maybe you are looking for

  • NB200-13th change in Windows XP to W7, W8

    Someone who comments if it is advisable to spend the W XP, because the support ends and Windows must be?

  • Satellite L505 - WPA2-PSK does not work, but works of WPA - PSK

    Hello I have a Satellite L505 and I tried to use WPA2-PSK security to connect to my Netgear DGN2000 router, since I read that only this authentication allows speed Wireless-N, but it does not work. I chose it as the mode to use on the router and Wind

  • How to start PSC-2200 in SafeMode remotely?

    Is there a way to boot into SafeMode remotely, or do I always have to use the switch? Maybe something I can get away with deleting a file any, it should start successfully?

  • HP 15-AC143WM: replace the DVD with SSD drive

    HelloI would like to remove my laptop DVD drive and replace it with an SSD. Is it possible to connect a laptop SATA drive this in any case and if so, how? my laptop HP 15-AC143WM Any help appreciated, Thank you REDA

  • Problem with DateTimePicker does not extend correctly

    Hello I am currently tinkering around with some of these shape objects and I put a DateTimePicker control in my code QML.  It shows very well with the current selected date, but when I click on the selector to change the date, it only shows the top l