Sony DRX - 83OU DVD burner not recognized DVD

Original title: sony DRX-83OU DVD recorder

My sony dvd burner does not recognize a dvd when inserted. What is a cheap solution or do I have to buy a new?

Hello

1. is the issue limited to any particular drive?

2. what version of Windows operating system is installed on your computer?

3 are you facing this problem only when burning a disc?

Refer to the steps in the following Microsoft article and check if that helps.

Your CD or DVD drive is missing or is not recognized by Windows or other programs: http://support.microsoft.com/kb/314060

Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

Keep us updated on the status of the issue.

Tags: Windows

Similar Questions

  • Error "CD burner not recognized"

    Original title: my computer does not recognize my CD/DVD burner.

    A few weeks ago I had a system restore on my PC due to problems, made this week that I'm trying to burn DVDs and CD, a message appears saying: "engraver of CD not recognized."  I asked the person who I paid to restore my PC to this topic and he says that the drive may have failed, or I need to re install the software, I can never remember having to install a software before.  I want to try to solve this problem without having to pay him more money.  The pointers will be appreciated.  I have Windows Vista and it's a PC table top.

    Thank you.

    Hi Computernumpty,

    As you have tried the system restore, try these below provided Microsoft KB article and check if the problem is resolved.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116

    Hardware devices not detected or does not
    http://support.Microsoft.com/GP/hardware_device_problems

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • DVD burner not recognized

    After download of Windows 8 Primere elements does not recognize my DVD burner or can I upload on youtube. What can I do?

    This article covers many of the reasons for which the pre cannot find a DVD burner: http://forums.adobe.com/message/2776760#2776760

    Hope this helps and good luck,

    Hunt

  • "DVD SuperMulti LightScribe drive / burner" not recognized as LightScribe drive

    I've had my desktop PC HP Pavilion Media Center TV m8100y CTO for several years now, but I've never tried using the LightScribe feature to date. I downloaded the drivers and software from [link removed - site is no longer available] newer, but none of that recognizes the "LightScribe DVD SuperMulti Drive/writer" (TSSTcorp CDDVDW SH-222BB) as a LightScribe drive. What should I do to diagnose and fix the problem, so I can use the LightScribe feature?

    After looking in the system recovery, I don't think I'm going to run until my PC has more serious problems than the issue of LightScribe. The recovery process of the system to the factory settings and then reinstall everything new is a bit more than I want to go at this point. Thanks anyway for the help, old_geekster. I'm OK with the mystery of LightScribe remaining unsolved for a little longer. When I get to perform a system recovery, I will update this thread with the results regarding LightScribe.

  • Sony Walkman device is suddenly not recognized in Windows 7

    Windows 7 has stopped recognizing my Sony Walkman NWZ - E438F Media Player since the last update. Do you have a system restore, and it did not help. Restored the walkman to the factory settings, and that did not help either.

    The walkman works fine on another computer. I tried all my usb ports - and ports all work with other devices, but do not recognize that there is an external device connected, when I try the walkman. I get power from the usb connection, however.

    Hello

    Download and install the latest firmware for your drive and check if this solves the software.

    See this link:
    http://eSupport.Sony.com/CA/Perl/support-info.pl?info_id=569&MDL=NWZE438F

    Also, download the latest version of the software from the below link:
    http://eSupport.Sony.com/CA/Perl/SWU-list.pl?MDL=NWZE438F&SelectOS=44

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

  • Camera Sony HandyCam DCR-TRV280 is not recognized by Windows 7

    I have a Sony HandyCam DCR-TRV280, a Toshiba L505D-S5963 running Windows 7 Home Premium 32 - bit.  My PC does not recognize the camera.  I loaded all drivers and updates to date mentioned above, but when you say to "go into the Device Manager and find the entry for the firewire (IEEE1394) change the driver for the IEEE1394 driver LEGACY and now your camcorder will be able to speak correctly on your PC.", my device driver does not list an IEEE 1394 device.   However, I tried to load the copy and save the 1394bus.sys to C:\Windows\system32\drivers file, but it will not accept a .inf, .sys not file.  I really appreciate all the information below, but would appreciate a little more help.   Thank you

    Hello Softail1015,

    In addition to the response of Amrita M, please relay exact model number and type of the Sony camcorder.  You can also view the link below, provided by the manufacturer of the device that contains compatibility information and pilot for the Handycam from Sony DCR-TRV280 Digital8 camcorder:

    http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=DCRTRV280&SelectOS=46#div_pos_124

    In addition, it seems that the Sony DCR-TRV280 may require an IEEE 1394 connection to transfer the video from the camcorder to the computer. You can also check with the manufacturer of the device to check if the Sony DCR-TRV280 supports the transfer of DV via USB or USB streaming.

    You can also view the link below, provided by the manufacturer of the device that describes the steps to know how to transfer video to a computer using an i.LINK (IEEE 1394) connection using the digital camcorder:

    http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C111893

    I hope this information is useful.

    Thank you

    Mary
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Sony Handycam DCR-SR80, getting not recognized in windows 7

    * - Title original - Sony Handycam DCR-SR80 60 GB 2.7LCD USB 12 X camcorder

    I upgraded my 64 bit pc and the software is installing capable but it does not recognize my cam, please someone help.

    Hello

    1. What is the brand and model of the computer?

    2. What is the error message you get when you plug in the camcorder?

    3. other USB devices work fine on the computer?

    We checked and found that this camcorder is compatible with Windows 7 64 bit. Click here to know more: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Sony%20Handycam%20DCR-SR80%2060GB%202.7LCD%20USB%2012X%20Camcorder&v=Sony&uid=DCR-SR80&l=en-US&pf=0&pi=0&s=DCR-SR80&os=64-bit

    You can also download the drivers updated to the camcorder here: http://esupport.sony.com/US/p/model-home.pl?mdl=DCRSR80&LOC=3#/downloadTab

    Method 1.

    Connect the device, run the hardware and devices Troubleshooter and check if that helps.

    Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

    Method 2.

    You can update the camera driver and check if that helps.

    Update a hardware driver that is not working properly: http://windows.microsoft.com/is-IS/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

    Refer.

    Install a USB device: http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

    I hope this helps.

  • SD not recognized on the Satellite A100-787

    Although the card slot recognizes the memory stick from Sony, the SD card is not recognized at all. I tried the card on the other computer and it worked fine. The driver for the card slot works well.

    Any ideas?

    Sorry, but it is not easy to tell what can be the problem. What is the capacity of this SD card? You have produced high quality or some unknown manufacturer SD card?

    If possible, try to get the second SD card and test how it works with your laptop Satellite A100.

  • Connected to the Portege 3500 USB DVD burner is not recognized correctly

    I am trying to connect a burner DVD HP DVDv 940th my 3500.When Portege I plug in the device, it is not recognized and the Device Manager list as a storage of unknown mass without a driver. Where can I get this driver?

    Hello

    Try to check the assumption of the manufacturer or the download page. Manufacturers of portable gift use support external devices t produced by other companies.

  • Tecra M5: UJ - 841 s not recognized as DVD/RW by any burning software

    I've seen on other posts that it is common that the drive to be identified in Device Manager as a DVD-RAM (which is what's happening) but my DVD multi (on a Tecra M5) burner is not recognized by any DVD burning software.

    Is there an update or driver that I should have?

    Thank you

    Hello

    My first question: do you use the Toshiba OS since the Toshiba Recovery CD?
    Have you install and use multiple applications all burning?

    To my knowledge the practice he s not advised to use burning different programs together.
    You must use only one. I recommend Nero. It s nice.
    If the sonic is installed on the HARD drive, try to remove it and use only nero.

    If the drive is not able to manage DVD media, you should check the different brands.

  • Can't burn files to DVD, error: "Media is not recognized.

    Original title: cannot burn files to DVD

    I am running Windows XP. I tried to burn different files on discs DVD new (e.g., Imation DVD - RW and RiData DVD + RW). I tried using Easy Media Creator 9, AShampoo Burning Studio ^, a Windows Media Center to burn my DVD discs (especially JPEG photos). In each case, I get the error message that my "media" are not recognized. This player will play music but it not "burn" my photos. Help, please!

    Hello
     
    1. what type of DVD burner do you have? Is this a DVD burner with capacities of reading and writing?
    2. have you ever burned a DVD using this DVD player in the past?
    3. are you able to burn the CD?

    Method 1.
    To diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
    Reference:
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/mats/cd_dvd_drive_problems

    Method 2.
    The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
    How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
    http://support.Microsoft.com/kb/321641/
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I just replaced my cd/dvd drive with a new TEAC one. I have Vista (32-bit) but iTunes Windows Media players, it is not recognized as a burner and won't read blank media. I need help!

    TEAC DV - 28 S - W model number

    Hello

    Try these steps and see if it helps.

    Step 1: Run the provided article fixit.

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    Step 2: Run the troubleshooter of CD/DVD burning.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

    For ITunes:

    http://support.Apple.com/kb/ts1436

    See also:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

  • Burner DVD not recognized computer Gateway 2750 laptop under Vista

    I have a DVD burner and my computer recognizes that the CD burner, I try to update the drivers but it doesn't show any DVD material. __

    I have a laptop gateway 2750 running Vista Home Prem and I a bicoeur precessor.  My computer only recognizes the CD-ROM drive and does not see the same DVD at all.  I tried updating my drivers but it won't allow me to add a DVD driver. Help

    Hello

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

    Check with the support of the door of entry for firmware updates and known issues.

    ===========================================

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Tecra S1: DVD ROM not recognized burner (Plextor PX-608AL)

    Hi all

    I bought a DVD ROM Writer (Plextor PX-608AL) that is not recognized by my Tecra S1 with XP Pro.

    I installed the latest BIOS v2.50 as well as the latest Windows patches.

    To the search, in the Setup of the BIOS (ESC during startup), the drive is not available.

    I tested the drive in my old non - Toshiba with Win2k laptop with no problems.

    Mounting frame is also OK (tested with the original Toshiba DVD ROM)

    Y at - there a trick to getting a 3rd disc part DVD working in a Tecra notebook?
    What is generally a problem

    Thanks for reading my ad and you answers or advice

    Klaus

    Hello

    It won't be very easy get your new work of drive on your S1, I will explain why:

    Most DVD players for laptops (including your Plextor 608AL) do not have jumpers to set
    their place according to the requirements of the laptop.
    Three settings are available: master/slave/CableSelect

    Most Toshiba laptops require the CD to react as a secondary master drive, unfortunately
    a disc factory settings in bulk comes as a disk Primary Master or CS.

    There are two options how to get to missing jumpers to make it work.
    (1) thanks to a new firmware patch that has this option defined by the software based on Toshiba standard or
    (2) by a bridge of material on some pins to the back of the drive.

    As you can see, both options will cancel the guarantee of the reader and are not easy for a techie/technician.

    As for option 1) on the search for a suitable firmware... no there are none available now. I checked the official site of Plextor, but also sites of patch firmware... NO CONCLUSION.
    According to another Forum, business Plextor responded to a request for a firmware adapted with this answer:

    start of quote:
    Dear Sir.

    The drive is detected beeing as a master drive.
    This setting cannot be changed. Are there no rider to do so.
    How mount you the device to your laptop, it's up to you.
    It of different for every laptop and either found in the manual of books or you can request that information from the manufacturers for your laptop.

    Kind regards
    end quote (source: http://club.cdfreaks.com/showthread.php?t=199145 )

    As in option 2), it requires some skills with soldering and I do not think that this forum is suitable for me to explain this procedure. You should google around to find the procedure "pin 47 ashore" on your own, taking all the risks of losing the warranty and/or the drive on your own.

    Concerning

    chain

  • HDD and dvd are not recognized in the configuration menu, what could be the problem?

    The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

    dhobs,

    Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

    You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

    Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

Maybe you are looking for

  • Cannot install OSX on SSD

    Having some problems trying to install OSX on a SSD The specifications of the imac are iMac 24 inch 'Core 2 Duo' 2.66 (early 2009) 2.66 GHz Core 2 Duo (E8135) Intro. March 3, 2009 Disc. October 20, 2009 Order MB418LL/A Model A1225 (EMC 2267) Family I

  • Z35 VESA Mount

    Is there a specific acer or the Z35 adapter vesa mount, once you remove the media. I have the supports VESA 100 x 100, but does not because of the depth of the vesa mounting locationOr have I missed something. I buy the used however monitor Thank you

  • Link to the database part?

    Hello I recently tried to replace a screen cracked on a laptop (15-j170us) and doing so damaged a PIN in the connector ZIF display. I'm trying to find the part number of the Board of Directors system for my exact model and lists 5 possible parts repa

  • Hotmail hangs after I delete e-mails, cannot do anything until it unlocks. Refresh does nothing

    After the signing in Hotmal and delete unwanted emails immediately noticed, Hotmail blocks for awhile.  Hit the refresh does nothing.  I can't go to the other Hotmail folders cannot click on anything. I am running Vista 64 and 9 of Solution Explorer.

  • Dell support can make the diagnosis online on my computer damage water connected to the same network as the one I use now?

    HI: My Office has undergone a lot of overhead sprinklers water damage in my condo fire. I ordered a new power and it fuels the system very well, but I have no video and tried the video card of the computer another and it does not work. I can connect