Sony NW E407 "no memory".

Similar Questions

• Sony camera and the memory card

  I imported a number of photos of my Sony Cyber Shot DSC RX 100 to my Windows 7 photo gallery. Somewhere in the process, I shot some of them. I imported directly from my memory card. Now when I try to view pictures in my camera, it says "cannot display" - the error message also said on another "unable to turn" screen. Does anyone have any ideas about what happened and I can recover these photos in original size on my card?

  Looks like you did with the camera connected to the computer and Windows to change the format (turn).  I don't think you can export these back to the camera.  With the large capacity memory cards, I suggest you not to change the pictures on the memory card and keep for a while before deleting.

  Suggestion:

  Do not connect your camera to your computer.  Buy a memory card reader - they are inexpensive.  In fact, most modern computers have a built-in SD card reader.   Remove the memory card from the camera and insert it in the drive.  Connect the player to your computer and treat it like any other thumb drive USB.  The card reader is small and fits easily in your case of the camera, much better that the cables and such.

  Much faster, without fussing over the drivers, no battery worries.  This also means that you don't have to install anything on any computer to be able to copy your photos.  It also lets you remove the lightening fast compared to in the camera memory card.  Most of the software that comes with cameras is terrible.

• Sony VAIO VGN-CS220D Memory Upgrade

  I would like to upgrade the memory of my laptop Sony VAIO VGN-CS220D and wonder what kind I need. Also, what is the maximum amount of memory that can be installed in this laptop?

  Thank you.

  Hi JaalTravien,

  Thanks for the added information. I already checked the specification of this laptop completely and it shows that the maximum RAM you can put there is 4GB. [((2GB/DDR2/800/SO-DIMM) 2 x 4GB)].

  Jen

  If my post answered your question, please mark it as "accept as a Solution.

• Sony VAIO VGC-LS30 memory

  Is it possible to upgrade a Sony Vaio VGC-LS35 more than 2 GB of RAM?

  Hi oldcutler!

  Based on the specifications of your VAIO computer.

• Sony Vaio VGN-UX180P micro laptop - memory upgrade possible?

  Micro pc Sony Vaio VGN-UX180P memory manufactured standard 512Mbytes, quite low for this miraculous micro pc...

  I am not sure, but I can pass the memory by adding additional 512Mbytes?

  Doesn't look like the Sony VAIO UX has the memory locations. All memory is soldered on the motherboard. You can download disassembly guides here (http://www.micropctalk.com/forums/showthread.php?t=119&page=5).

• Flashcards for DSC-P200

  I have a DSC-P200 'old' I intend to keep it for now and try to find more info on compatible memory cards. The specs say that it takes a USB stick or a Memory Stick Pro, and I don't have the latter in the version of SanDisk Magic Gate. However, the accessories of the model on the Sony site show a memory stick duo and duo and duo Pro are now the most widely available. For me, duo style seems too broad for the location of the camera, and I don't see how an adapter could remedy this situation. But Amazon shows a Sony Memory Stick Duo replacement adaptor it says is compatible with 'Material Memory Stick'. Would someone please clarify this for me? If a style duo worked, possibilities of memory capacity card opens. Thank you

  Thank you for your post and welcome to the forums.

  Simply get a Memory Stick Duo adapter and you will be able to use the Memory Stick Pro Duo in the camera. Adapt the size of the memory stick adapter, either a Duo or Duo Pro.

• On Windows XP, how can I enter a BACK order?

  My oldest camera Sony DSC 707 takes memory sticks not PRO.  If I reformat the stick Pro using the e command line (player): FS:FAT /A:8192 it will resize itself clusters of my stick of memory PRO up to 8 KB.  This line has been recommended on a forum of PhotoTakers.  Format XP gives options limited so I think go under DOS, it's my only option.  How do I BACK?

  Click Start...

  Then click Run...

  Type "cmd" without the quotes reverse... you will spend in DOS mode...

  yep.................

• retrieve deletedfiles

  I used a memory stick pro duo (sony) click on some pictures with my camera sony dsct900. THE MEMORY ORIGINAL.when EAST of STICK I first connected to my computer using a usb adapter, I was able to view the files, but I reconnected it it (after a few minutes), he showed that the card is corrupted (used 0 bytes, 0 bytes) and I need to format it to use it.then I Googled it and found this

  http://www.ehow.com/how_5247182_recover-data-corrupted-memory-stick.html
  and format the memory stick told with setting of ntfs. then I tried to recover the files, but I was unable to get any files.i have already done the following.
  1. run the cmd disk check
  2 recuva from piriform used
  3. Show hidden files
  is there a way to recover my data?
  Sorry if I posted in the wrong section because could not find a.

  Hello

  Sorry you really need to work with those who have had the problem and treat it with it on
  a regular basis. If I had the problem I would work with Piriform Recuva support and
  forums that are excellent resources.

  There are all kinds of businesses on the internet claiming their software can recovery
  device files, but only those who have actually used can be sure they can
  Help. And number of claims will be hype or wrong again.

  Check the answers for GravityDead in this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/recover-data-from-corrupted-Sony-memory-stick/c101543a-737C-E011-9b4b-68b599b31bf5

  Rob - SpiritX

• Size of Android OS on new XZ

  Collected my 32 GB XZ a couple of days and have been implemented.

  Just noticed that the operating system and a few apps (additional applications as 15 in total) has used up to 46% of the memory of the phone.  Only the operating system represents 10.6 GB.  Just checked my old Z2 that is running the same Android 6.0.1 and is 4.5 GB.

  I used the Xperia transfer Mobile app which although worked well has crashed a few times so had to abandon it and try again until finally, it worked.  Could be the problem?

  One of the reasons behind the allocation of memory is 64-bit and the other is that Sony reserves usually more memory in order to cover all the requirements of a future android update.

• I recently bought the camcorder FDRAX33. I wanted to know what card users would recommend?

  I recently bought the camcorder FDRAX33. I wanted to know what card users would recommend? I don't want to spend a lot of money. Thank you!

  If you want to use a Sony card, consider the Sony 64 GB SDXC Memory Card (class 3 speed) UHS - I (Sony #SF64UX/TQN).  If you record video 4K, then you can consider the Sony - 64 GB UHS - I (class 10/U3) SDXC memory card (Sony #SF64UZ/TQN).  The difference, other than the second being about twice the price as the first, is the writing speed.

  Sony compatible cards

  64GB SanDisk Extreme Pro UHS - I memory card SDXC U3 (class 10) (SanDisk #SDSDXP - 064 G - A46) is another option and is cheaper than the Sony U3 version.

  Of course there are higher capacity cards.

• Windows 8 blue screen - DRIVER_POWER_STATE_FAILURE caused by ntoskrnl.exe

  I have a new Sony Vaio Pro and have experienced outages of system 3 times.  All the accidents that happened after I've restored from hibernation and were related to the bug check DRIVER_POWER_STATE_FAILURE.  After the first two accidents, I ran Sony diagnostics on the memory and hard drive SSD and they passed the test.  I even sent my Vaio Pro to the repair depot to Sony for a test on the memory, hard drive and other hardware and they all passed.

  I found my Vaio Pro last Wednesday and updated the Windows 8 from scratch.  This morning, after the resumption of hibernation, I realized my Bluetooth mouse did not work.  So I stop the laptop hoping a restart could solve the problem.  However, it took almost 5 minutes before they would stop and restart Windows gave a warning:

  "Experienced problem with closed Windows.  Your PC fell on problem.  This problem case your PC to restart.

  BlueScreen Viewer it pointing DRIVER_POWER_STATE_FAILURE caused by driver ntoskrnl.exe.

  BlueScreen details as follows:

  A problem has been detected and Windows has shut down to prevent damage to your computer.

  The problem seems to be caused by the following file: ntoskrnl.exe

  DRIVER_POWER_STATE_FAILURE

  If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:

  Check to make sure any new hardware or software is installed correctly.

  If it is a new installation, ask your hardware manufacturer or software, the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading.

  If you need to use safe mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options and then

  select Safe Mode.

  Technical information:

  STOP: 0X0000009F (0X000000000000012C, 0XFFFFFA80196707C0, 0 X 0000000000000004, 0XFFFFF880009EC810)

  Ntoskrnl.exe - address 0xfffff80189072106 base at 0xfffff8018901e000 DateStamp

  0x51a966cd

  Here's my minidump file:

  https://DL.dropboxusercontent.com/u/1928780/093013-7531-01.dmp

  File Msinfo32.NFO:

  https://DL.dropboxusercontent.com/u/1928780/Msinfo32.nfo

  Dump file memory (do not know why this file is nearby big 550MO):

  https://DL.dropboxusercontent.com/u/1928780/memory.dmp

  p.s. I think this may have something to do with my Bluetooth driver I had experienced many times the Bluetooth driver has been disabled by Windows and the event viewer reported "the Local Bluetooth is not indeterminate way and will not be used.  The driver has been unloaded. "

  Thanks in advance,

  William

  Hi William,.

  The attached file of the DMP is the error checking DRIVER_POWER_STATE_FAILURE (9f) .

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  9F, {4, 12 c, fffffa80196707c0, fffff880009ec810} error checking

  Parameter 1 of the bugcheck is 4 , which indicates that the transition of power over waiting to synchronize with the Pnp subsystem.

  The 2nd setting is 12 c , which indicates that it is exceeded for a total of 12 seconds.

  By default, the crash dump is failing UsbHub3.sys who is the pilot of HUB-USB3 (System driver and not the true cause, and is due to the fault by something else).

  If we look further into the dump:

  ERROR: Module load completed but symbols could not be loaded for btmhsf.sys

  FAILURE_BUCKET_ID: 0x9F_4_btmhsf_IMAGE_UsbHub3.sys

  Implicit thread is now fffffa80 196707 c 0

  ^^ If we run one! thread on the address fffffa80 196707 c 0:

  Child-SP RetAddr: Args to child: call Site
  fffff880 '20b42f20 fffff801' 890bb7cb: fffffa80'00000001 00000000'00000000 00000000'00000003 00000000'00000000: nt! KiSwapContext + 0 x 76
  fffff880 '20b 43060 fffff801' 890ba60f: fffffa80'18b23ef8 fffff880 '0115a 178 00000000 00000000' fffff880' 0622a 202: nt! KiCommitThreadWait + 0x23b
  fffff880'20 b 43120 fffff880'06114700: fffffa80 '16115fd8 fffff880' 00000001 00000000' 00000000 00000000'00000000: nt! KeWaitForSingleObject + 0x1cf
  "fffff880 '20b431b0 fffff880' 06117ef0: 00000000 ' 00000018 fffff880 ' 0622a2f8 00000000'00000000 00000000'00000018: btmhsf+ 0 x 33700
  fffff880 '20b431f0 fffff880' 060fb1e4: fffffa80'17 has 00030 fffff880 '20b433b0 fffff880' 0622a2f8 00000000' 00000000: btmhsf+ 0x36ef0
  fffff880 '20b 43260 fffff880' 060e2b84: 0000057f 'e9eaddd8 00000000' 00000127 fffff880 '0622a2f8 fffff880' 0115 has 178: btmhsf+ 0x1a1e4
  fffff880 '20b432b0 fffff880' 060e2cce: 00000000'00000008 fffff880 '20b 43370 00000000'00000008 fffff880' 20b 43378: btmhsf+ 0x1b84
  fffff880 '20b432e0 fffff880' 0114ecb0: fffffa80'16153860 00000000 00000000' fffff8a0 '04c3a748 fffff801' 89403cfe: btmhsf+ 0x1cce
  "fffff880 '20b 43310 fffff880' 010e881d: 00000000 ' 00000127 fffff880 ' 20b433b0 00000000'00000119 fffffa80'16153860: Wdf01000! FxPkgPnp::PnpEventSurpriseRemoveIoStarted + 0x2c
  "fffff880 '20b 43340 fffff880' 010e9032: fffffa80 ' 16153980 fffffa80' 16153988 fffffa80 ' 16153860 fffff880 ' 20b434c0: Wdf01000! FxPkgPnp::PnpEnterNewState + 0x1a1
  "fffff880 '20b433e0 fffff880' 010e8cdd: 00000000 ' 00000000 fffff880 ' 20b434c0 fffffa80 ' 16153970 fffffa80' 16153860: Wdf01000! FxPkgPnp::PnpProcessEventInner + 0 x 122
  fffff880'20 b 43450 fffff880'0114 701 d: 00000000 00000000' fffffa80 '16153860 fffff880' 00000000 00000000 00000000': Wdf01000! FxPkgPnp::PnpProcessEvent + 0x18d
  fffff880 '20b434f0 fffff880' 010d1ecf: fffffa80'16141 b 30 fffff880 '20b 43570 00000000 00000000' fffffa80' 1615d1d0: Wdf01000! FxPkgFdo::_PnpSurpriseRemoval + 0 x 25
  fffff880 '20b 43520 fffff880' 010c99da: fffffa80'197 b 9010 fffffa80 '197b 9010 fffffa80' 197b 9010 00000000 00000000': Wdf01000! FxPkgPnp::Dispatch + 0x18f
  "fffff880 '20b 43580 fffff880' 010c9aa6: fffffa80' 197b 9010 00000000'00000005 fffffa80 ' 161531 c 0 fffff880 ' 062fca20: Wdf01000! FxDevice::Dispatch + 0x19a
  fffff880 '20b435c0 fffff880' 062e3cbe: fffffa80 '197b 9010 00000000 00000005' fffffa80' 1615e190 00000000' 00000000: Wdf01000! FxDevice::DispatchWithLock + 0xa6
  fffff880 '20b 43600 fffff880' 062e3484: fffffa80 '197b 9010 00000000 00000000' fffffa80' 1615e190 00000000' 00000000: bthport! BthDefaultPnpHandler + 0x2a
  fffff880 '20b 43630 fffff880' 062e2cc1: fffffa80 ' 1615e190 fffff880 '062fca17 fffffa80' 1615e190 fffffa80 ' 197b 9010: bthport! BthHandleSurpriseRemoval + 0xc4
  fffff880 '20b436b0 fffff880' 062e2b04: fffffa80' 197b 9010 00000000'00000701 fffff880 '062fca20 fffff880' 20b 43800: bthport! BthHandlePnp + 0x16d
  fffff880 '20b 43700 fffff801' 8940a8f7: fffffa80 '1615e040 00000000' c00000bb 00000000 00000000' fffff880' 00a 82180: bthport! BthDispatchPnp + 0 x 68
  "fffff880'20 b 43750 89526 fffff801 39 d: 00000000 ' 00000017 fffff880 ' 20b 43819 fffffa80 ' 16137710 fffffa80' 16137060: nt! IopSynchronousCall + 0xc7
  fffff880 '20b437c0 fffff801' 895265e6: fffff8a0 ' 04069710 00000000'00000308 fffffa80' 16137060 00000000 00000000': nt! IopRemoveDevice + 0xd9
  fffff880'20 b 43880 fffff801'89526501: fffffa80'16137710 00000000 00000000' fffff8a0 '0c432a01 fffff880' 20b 43930: nt! PnpSurpriseRemoveLockedDeviceNode + 0xaa
  fffff880'20b438d0 fffff801'89526468: fffff8a0 00000000'00000000 00000000'00000000 ' 0c432a70 fffffa80'16137710: nt! PnpDeleteLockedDeviceNode + 0x5d
  fffff880 '20b 43910 fffff801' 89525bcb: 00000000 00000000' fffff880 '20b43a70 fffff8a0' 0b89e6f0 00000000'00000005: nt! PnpDeleteLockedDeviceNodes + 0 x 98
  fffff880 '20b 43970 fffff801' 893b52e5: fffff880'20b43b88 00000000 00000000' fffff8a0 ' 05764100 fffff8a0' 00000000: nt! PnpProcessQueryRemoveAndEject + 0x2c3
  fffff880'20b43ae0 fffff801'89418346: fffff8a0'04069710 00000000'00000000 00000000'00000001 00000000'00000000: nt! PnpProcessTargetDeviceEvent + 0x9d
  "fffff880 '20b43b20 fffff801' 890b62a1: fffffa80 ' 196707 c 0 fffff8a0 ' 0b89e6f0 fffff801 ' 8941805 c fffffa80' 16748130: nt! PnpDeviceEventWorker + 0x2ea
  "fffff880 '20b43b80 fffff801' 8904afd9: fffffa80 ' 00180000 00000000 00000080' fffff801 ' b 890, 6160 fffffa80 196707 c 0: nt! ExpWorkerThread + 0 x 142
  fffff880 '20b43c10 fffff801' 890ff7e6: fffff880 ' 00a 82180 fffffa80 ' 196707 c 0 fffffa80 ' 06741b 00 fffffa80' 06765940: nt! PspSystemThreadStartup + 0 x 59
  fffff880'20b43c60 00000000' 00000000: fffff880 '20b 44000 fffff880' 20b3e000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16

  We can see the various routine calls BTHUSB Device bthport.sys (Bus Bluetooth driver) who then finally enter various before btmhsf.sys some error checking.

  btmhsf.sys is the Intel Proset Bluetooth HighSpeed filter driver and probably the culprit here. Update this driver ASAP - http://downloadcenter.intel.com/default.aspx?iid=gg_support-EN_01+home_downloadctr
  or uninstall it if you do not plan to use BlueTooth.

  ---------------------------------------------------------------------

  If after doing the above, you are still blocked, remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes:

  -AVG removal tool http://www.Avg.com/us-en/utilities

  In addition, to answer your question as to why the MEMORY. DPM is so important because it's a dump of memory rather than a small kernel. Kernel memory dumps contain all the kernel memory was working with and that was in use at the time of the accident, that is why it is larger and provides much more information.

  Kind regards

  Patrick

• I can't print from my stick duo memory Sony on my hp envy 5532 what I am doing wrong? Please

  I have a Sony camera that has a memory stick duo sony and it does not in my hp envy5532 what am I hurt? He used to fit into my printer Epsom ok... help

  Hi!, Puppydoog:

  Welcome to Forum!

  If you have a camera Sony, with Tick Pro Duo memory, you can first of all, with the camera software and connector cable, download for PC, or through one of the card reader, PC (Kingston FCR-HS219/1 or similar). After that, you can copy to the PC with the same card reader, SD card, for use, in your printer, HP Envy 5532.

• Replacement of a card memory Sony Cyber-shot DSC-T100

  I have a Sony Cybershot DSC T100. I lost the memory card recently. wondering how I can replace it. Thank you!

  The Cyber-shot can use a Memory Stick Duo.

• Message "memory full" Sony ICDPX312

  I have a digital voice recorder (model ICDPX312). I used it for about six months without any problem.

  Now he's giving a message "memory full" when I try to save a new file - in spite of the fact that I have not ALL sound files on the recorder (all have been moved to my desktop computer and deleted from the device).

  When I plug it on my Mac, and 'get info', told me that 1.9Gigs is available (as it should). When I navigate in the folders in which the records are stored, I can confirm that there are no remaining files on the device.

  How to reformat (?) the device so that it frees its memory and I can continue to use it?

  Thank you for your post and welcome to the forums.

  There is a formatting procedure which is on pg 85 users manual:
  http://www.docs.Sony.com/reflib/docget. ... 0,' manuals
  If this does not work please contact the Sony Support by clicking here:

  http://eSupport.Sony.com/us/Perl/suppor... l = ICDPX312

• I can move video from Sony DCR-SR42 files to a memory stick?

  Please show me how to move a movie from a disk file to a memory stick Sony DCR-SR42 hard. Thank you.

  Location Memory Stick of the DCR-SR42 is used to record images and so it is not directly the camcorder can transfer files from the hard drive to a Memory Stick. However, once you have the camcorder connected to your computer, you can then move the files using your computer.