Sony Smartwatch 2 - device not detected when connected to laptop computer

Hi when the connection of my smartwatch 2 in my laptop I get the USB device cannot be detected / no driver error and PC companion doesn't recognize it too. I know this isn't a laptop problem that I connect my Xperia Z tablet and Z1 phone him fine. Any help would be appreciated. Gavin

The SW2 is not a device that will be detected as a connected external device - updates are performed via an update to the app and apps are done via the phone - so you can not transfer files simply load it via your laptop

Tags: Sony Accessories

Similar Questions

  • USB device not recognized when connected to the computer

    original title: USB port problems

    When I plug a usb device, I get a message not recognized usb device (one of the usb devices attached to this computer has malfunctioned and windows does not recognize)

    Hello

    ·         Since when are you facing this problem? Were you able to use this USB device on the system before?

    ·         Remember to make changes to the system?

    ·         It happens with all USB devices that try you to plugin for the system?

    I suggest running the fix which is present in the article below and check if the problem persists.

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    Also, I suggest you return the item mentioned below.

    A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

    http://support.Microsoft.com/kb/925196

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.

  • GPIB has not detected when connected to the internet

    Hello

    I have keysight power supply connected to the PXI-8880 via GPIB, it does not detect when it is connected to the internet & it was detected when its not connected. Any body can help me to solve this problem.

    Hello

    This problem occurs because of a conflict in present multiple network adapters in the system. It was a question that has used for detection of targets ethernet to the system that has been resolved. But then this question has also resolved to do the same thing. You can follow the link on how to change the order of the present network adapters in the system.

    http://digital.NI.com/public.nsf/allkb/FD9E1AF5AB1343098625736F0076DE6B

    You must also make sure that the IP addresses of the network adapters are different, otherwise conflict can happen also.

  • "Boot Device not available" when starting cold laptop Dell Inspiron 8200 with Win XP.

    "Boot Device not available" when you power on a Dell Inspiron 8200 with Windows XP.  Repeated restart attempts after Windows starts.  Once in Windows, I can restart repeatly with no problems.  The "Boot Device not available" only occurs during a cold start the PC.  Any help is appreciated.

    Malkeleah,

    Thank you!  Unfortunately, the laptop is 8 years old and is no longer under warranty.  With your guidance, I'm going to explore repair or replace options.  Best wishes to you...  Taylor

  • USB device not recognized when connecting to printer

    Hello Microsoft,

    Hear I have problem in my PC. I connect to my new printer (RIOCH SP 100), but in my Winodws7, they show me that your usb device is not recognized. I try to use the resolution of problems. but it was a failure of dem, so now what is the way to solve my query.

    Hello Dhruv,

    Thanks for posting your question on the Microsoft community.

    We need more information about the issue so that we can help you better.

    What is the complete model of your printer RICOH SP 100 number?

    Thank you for details on the issue.

    This problem may occur because of settings and corrupt device drivers.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check.
    Reference:
    Open the hardware and devices Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    Please also run the printer Troubleshooter and check.
    Reference:
    Open the printer Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

    If this does not help, use method 2.

    Method 2:
    Controllers USB reinstall and check the issue. Please follow these steps:

    a. press Windows + R keys together, type devmgmt.msc in the run window and press ENTER.

    (b) in Device Manager, expand 'USB Bus controllers'.

    c. right-click any device under "Controllers of Bus USB" and click Uninstall.

    d. repeat the same steps for other devices.

    e. Once completed, restart the computer.

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • The blackBerry Smartphone Reload software: 552 (no answer, bb not detected when connected to pc)


    Nickolai, Hello and welcome to the Support Forums of community BlackBerry.com.

    1 have you done a recent backup of your Blackberry using the BlackBerry Desktop Software?

    2. If you pictures are stored on the card, you will be not should not lose them. Do you know?

    3. you don't say if you have, but that it has first: perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for about five minutes and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

    4. If after the reboot, you still have the 552 error, you must make the device on the wiping and reloading. I posted the instructions below on how to fix this error and may or may not remove and delete your contacts.

    (1) make sure that you have Blackberry Desktop Manager installed.
    http://NA.BlackBerry.com/eng/services/desktop/
    (2) on your PC, go to start > run and copy and paste the following line exactly (i.e. with quotation marks):

    'c:\program files\common research in motion\apploader\loader.exe' /nojvm

    (3) the Application Loader Wizard will appear - click on "next".
    (4) in the ' connection: ' drop-down menu, you should see "USB - PIN: UNKNOWN". Click on the button "next".
    (5) you should see a list of applications ready to be installed for your Blackberry. Press Next and finish, and that you are well on your way to get your Blackberry to life. Just unplug and let the process finish completely.

    NOTE: If you do not display the list of applications mentioned in step 5 and instead to see the message "the Blackberry Desktop Software has no Blackberry Device Software for the device you have connected to the computer. Contact your wireless service provider or system administrator', then you must download the Blackberry operating system for your support and your device.
    http://www.BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate type of carrier and network, select your Blackberry model from the list and download the latest version. Install this download and follow the steps above again and you should be on the right track.

  • iPhone not charging when connected to the computer via USB

    Original title:

    I use windows 7, when I connect my iphone to laptop, it does not load .i don't know it's because of device drivers not installed.when I connect my phone to another laptop its load.  Thank you

    Hello

    1. are you facing problems with USB devices?

    2. that you get an error? If Yes, what is the exact error message?

    3. is your phone detected in iTunes?

    4. doesn't Windows detect the iPhone as storage medium?

    5. are you aware of any changes made to the computer, before the show?

    Method 1:

    Run the hardware troubleshooter and check the issue.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2:

    Try to plug it into a different USB port and verification.

    Method 3:

    Check out the following link.

    iOS: device not recognized in iTunes for Windows

    http://support.Apple.com/kb/TS1538

    I hope this helps.

  • USB device not recognized when connected to Toshiba Port Replicator II

    I recently bought the Replicator above, loaded the software, restarted my computer and only then connected the device according to the instructions.

    I get the error message "unrecognized usb device".
    When I go in my gear and check for driver for this device 'unknown' told me that no drivers have been shipped for her

    So my Replicator does not.
    I deleted the software and reloaded with the same result

    I have a laptop Tecra A8 running Windows XP Service Pack 2
    Any help or suggestion would be appreciated

    As much I know PortReplicator II only is not supported for Tecra A8. According to the sustained specification is Port Replicator III + only.

    If you try to use the option not supported, it is not easy to give any help.

  • Devices not recognized when connected to itunes from a PC. Recently upgraded to windows 10 and appears there is no driver

    I'm sure that this request has jumped several times. I've recently upgraded hardware and software being windows 10. All devices being Ipads, Ipods and Iphones are not recognized in iTunes once connected to your PC. The PC is to recognize that a device has been plugged in with the usual beeps. I've seen drivers and it seems that usb iTunes etc is not listed. How this can be fixed. Thank you inadvance for advice

    Hello, Aubin Grove,.

    Thank you for using communities Support from Apple!

    I understand that your iOS devices are not recognized by iTunes when you plug it into your computer. There may be two different causes for this type of situation, but we have some great troubleshooting to help you resolve this situation.

    To begin the process of diagnosis, I would suggest reading over and working through the information mentioned in the following article.

    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support

    See you soon!

  • external device is not detected when you connect to a personal computer.

    Windows 7 pro, pen drive sound edition does not detect when you are connected.

    Yes sir its resolved, so that the new windows 7 pro, its pre disconnected installation mode. so that I can re active in what optins usb boot menu settings.

    Thanks to you all.

  • We get the popup "USB device not recognized", when nothing is connected.

    Original title: pop up message

    I connected the USB cord to transfer information from your old phone to new phone via Itunes.  Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize.  Nothing is plugged in, but message appears every few seconds.  How can I get him to stop?

    Hello

    It seems that you are getting the popup "USB device not recognized", when nothing is connected.

    What is the brand and model of your computer?

    I suggest to uninstall the USB controllers and check if you get the context menu.


    Method 1: Remove and reinstall all USB controllers


    a. clickStart, type devmgmt.msc in the start search box and press ENTER.

    b. expandBus USB controllers.

    c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.

    d. restart the computer, and windows will install the rear USB drivers.

    If reinstalling USB host controllers fails to resolve the issue, go to method 2.

    Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.

    If you have additional problems, please reply to this post and we will be happy to help you further.

  • USB driver on my pc not shown when connected

    I've always been able to connect my MP3 with my USB to my system to download my music files, but lately when I tried this, it does not work. No mp3 symbol or it does not load the internal software. Help, please

    Hello

    Set the MP3 MTP Mode for WMP11 sync - mode MSC to treat the MP3 as a reader.

    ----------------------------------------------------------------------------

    If necessary:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Make sure that Windows is updated appropriately that there have been several USB updates.

    1 check that the driver letters for them, for a player, if the drive of the default drive letter is changed, what is happening.
    Mine was h: I added a device that took H: and the player stopped. So I put it back to H: and the other
    device to J: and everything worked again. If necessary start - type in the area of research-> disk management find top
    -Right-click on it - RUN AS ADMIN

    Don't forget to remember the MP3 must be set to the PSG to sync with WMP, and meteorological service of Canada to copy and delete files
    and update the firmware.

    If no joy follow these steps:

    You may need a powered hub. (all the USB ports on your computer are not powered, often only 2)

    Try these:

    Make a Restore Point

    Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

    Here, your devices are the MP3 player.

    Now look everywhere EXCEPT the USB controllers for your devices (cannot be found) and if you find
    It RIGHT CLICK and UNINSTALL all.

    now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

    APPLY/OK

    RESET

    This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

    Here is the similar procedure under XP, Vista is the same, except that we need clear specific devices, as appropriate.
    http://support.Microsoft.com/kb/310575

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.

    http://www.NirSoft.NET/utils/usb_devices_view.html

    You must remove all instances of the devices and restart.

    -------------------------------------------------------------------

    If the above does not work (and it should be considered the preparatory work).

    This works for any MP3 player when the USB stack is not corrupted:

    1 player to delete and restart computer - switch to MTP mode on your MP3 player

    Regardless of what brand of MP3 you have

    1. check this Just In Case

    http://KB.SanDisk.com/app/answers/detail/A_ID/42/kW/E200 * / page/2/r_id/101834

    2. does not present (web page as reference)

    http://KB.SanDisk.com/app/answers/detail/A_ID/192/related/1/kW/E200 * / page/2/r_id/101834

    In XP: Start - RUN - CMD

    In Vista: (Do this way!)

    Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

    Copy and paste this command into windows XP or Vista CMD - press enter

    NET local service localgroup administrators / add

    3. then follow:

    http://KB.SanDisk.com/app/answers/detail/A_ID/139/related/1/kW/E200 * / page/2/r_id/101834

    I hope that your MP3 now works.

    -------------------------------------------------------------------

    Only if necessary:

    Try a system restore before what happened:

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Companion of Xperia does not detect when I unlock my phone

    Companion of Xperia does not detect when I unlock my phone and keeps the dialog box "device is locked" even after that I unlocked the phone.

    I restarted the phone as well as killed processes all XC and rebooted too, but no difference.

    What's wrong?

    Overview running Xperia Z3 and Android N.

    OK, found a solution.

    Developer mode entered,

    Enabled USB debugging

    Again inspected the option 'Select USB Configuration' to 'PSG '.

    Now unlocked XC.

    Weird.

  • CD/DVD Rom drive - disk not detected when you try to play a movie or a cd.

    I tried everything in the book according to what the technical support guy me to HP.  Gave me a new optical drive.  I made the purchase and asked the guy.  How do I get the driver if it does not appear in my device manager?  He said just to install the new optical drive, and it will download automatically.  Yes, it was the most ridiculous thing.  He did his best to convince me.  Now, I received the new optical drive and even absurdity.  It won't work.  Try to get assistance and spend hours on the phone with them and no one can help me.  Wow.  Scam, scam, I don't really know what to call it.

    Hello

    Maybe it wasn't the drive first:

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • O2 dongle is never to step of the password and then just says device not detected / found

    Original title: im trying to use my o2 dongle to connect to the internet, but for some reason some he used to let me...

    Ive connected the dongle and it goes through the normal treatment it says connection. However, it's never at the stage of the password and then just says device not detected / found

    Hello

    You can try to reinstall the USB controllers and check.

    a. Click Start and type devmgmt.msc and then click OK.

    b. expand Bus USB controllers.

    Note: You will need to scroll down to find this point.

    c. the first USB controller under Bus USB controllers right click and then click on uninstall.

    d. Repeat steps above for each controller USB is listed under Bus USB controllers.

    e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

    f. check the device to see if it works.

    You can also consult the following link:

    Tips for solving problems of USB devices

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Hope this information is helpful

Maybe you are looking for