Sony Vaio VGN-FW11M-CD/DVD is damaged or missing error codes 10, 19, 31, 32, 39, 41 problem

Similar Questions

• My Sony Vaio VGN-NR260e mass storage controller driver is missing. Where can I re-download it?

  Where can I find driver for my Sony Vaio mass storage controller?

  On the Sony support site, specific to your model (if Sony compatible win7 on your model)

• SONY Vaio VGN-AW360J will not power

  Hi all

  I'm new to the Group of users, and this is my first posting.
  I have a SONY Vaio VGN-AW360J, the keyboard is for quite awhile, buggy not allowing the good boot-up, lock up, creation of random key entries and sorting. I found that if I opened the laptop, access to the slick KB then disconnect and reconnect it LT would work normally until I later had to reboot for some reason any. I ordered an exact replacement KB and I'm waiting for delivery is however now the LT does not power on at all. I checked the presence of 19.5 VDC at the level of the connector on the main Board after taking power, but don't know where else to check even if I can with my simple digital multimeter. I did all the procedures proposed on the site of Sony support without change.

  The symptoms are the following: no indication of power to the power switch, no green light. DC power is present on all four positions at the level of the connector PCB (PCN1). There is no change with or without the defective original keyboard connected and no change with all removable devices disconnected i.e.: CD/DVD drive, hard disk and RAM all removed from the main Board.

  Then, Oh, my darling Sony Vaio is completely dead in the preverbal waters of my digital life. My big question is, does anyone have knowledge of this problem and is at - it no reasonable or logical hope through the necessary repairs, if any?

  TKS,
  Dave S.

  Sorry for this Santec,

  I just explained on my post that the issue is already material. I'll also send you a private message for the info. Here's the correct link: https://community.sony.com/t5/VAIO-Hardware-Networking/How-do-I-get-assistance-with-my-VAIO-Laptop/m...

  Kind regards

  Vincent

  If my post answered your question, please mark it as "accept as a Solution.

• My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  My sony vaio vgn fw170j does not illuminate, the charging light turns on, but the computer does not light

  Hi Heyoabc,

  Please resend your message main here.

  Nick-

• Sony Vaio VGN-UX180P micro laptop - memory upgrade possible?

  Micro pc Sony Vaio VGN-UX180P memory manufactured standard 512Mbytes, quite low for this miraculous micro pc...

  I am not sure, but I can pass the memory by adding additional 512Mbytes?

  Doesn't look like the Sony VAIO UX has the memory locations. All memory is soldered on the motherboard. You can download disassembly guides here (http://www.micropctalk.com/forums/showthread.php?t=119&page=5).

• Sony vaio vgn-fs515b xp home edition keeps rebooting after loading screen xp

  I have a sony vaio vgn-fs515b with windows xp home edition and all of a sudden, he continues to go to windows xp loading screen and then guard reboot until you shut it down does anyone have an idea what is the problem and how to fix it?

  Hi arissavva,

  I may have a hardware problem; I suggest you to contact the manufacturer for more help and information.

  http://eSupport.Sony.com/

• I have a sony vaio vgn - fs415m laptop and I have no sound on it. I'm missing an audio device I think. How can I solve this problem

  I have a sony vaio vgn - fs415m laptop and I have no sound on it. I'm missing an audio device I think. How can I solve this problem

  Hello Keno09,

  Thank you for your message.  We will check your audio driver.  Please follow these steps:
  1. click on 'Start' > right click on 'My computer' > select 'manage '.
  "2 click on Device Manager.
  3. in the right pane, click the (+) sign next to "Sound, Video Game..."
  4. underneath, you will find the brand/model/name of your audio card/adapter?
  5. you will need to go to the site of the manufacturer and download/install the latest driver for your audio device.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I forgot sony vaio (VGN-CS18GN) login password using windows vista business 32-bit processor. How should I proceed?

  I forgot sony vaio (VGN-CS18GN) login password using windows vista business 32-bit processor. How should I proceed?

  Hello

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  HI, I have a sony vaio VGN-CR21S WHAT and I've upgraded to windows 7, but now my motion eye camera does not work what do I do, please quick help

  all I need is someone find my phone on the Sony site and that will be a pretty

  http://eSupport.Sony.com/us/Perl/select-System.pl?Director=home&PRODTYPE=24

  go to this site and to detect my model (vaio only)

• Only problem with VISTA (sony vaio VGN-FW375J)

  Hi guys... I hav a unique problem... I have sony vaio (VGN-FW375J) with drive HARD 320 GB, partitioned into C: (108 GB) drive, drive (60 GB) D: and E: (GB 118) drive, just around 286 GB... This means that I've lost almost 34 GB (I dono how to recover the 2 rear)... share form what I have 3 folders on all drives (autorun.inf, comment.htt, and desktop.ini) which am not able to remove 2... Thirdly, I have a unique problem, where in my free space (30 GB) in C: drive only 15 GB... I dono what happened to the other 15 GB... KINDLY HELP...

  Hi shiva55,

  Check to see if the following is useful.

  Method 1: Try to perform a disk cleanup and check if it helps.

  Delete files using disk cleanup

  Some of the files you are referring are system files that are required by the operating system, and you will not be able to remove them. But there may be malware infection as well.

  Method 2: Perform an online scan to find any infections on the computer.

  For Windows Vista and Windows 7 security scanning

  Malicious software removal tool | Protect your computer

• card on SONY VAIO VGN-FW11E ISATAP problem

  Microsoft ISATAP ADAPT # 2 on SONY VAIO VGN-FW11E

  YELLOW IN COLOR, this is the messege

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. HOW TO SOLVE IT?

  When I checked on the website says cannot ignore this messege, that is not the way to solve the problem is?

  can someone help me please...

  Thank you

  beeeeeeeeeeeeee

  Hello

  In this case, it is the correct action, ignore him.

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
  and on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message
  http://support.Microsoft.com/kb/932520

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• built in mic on sony vaio vgn-sz640

  built in mic on sony vaio vgn-sz640 does not work after format and install the driver windows 7 is web of sony sigmatel but there is no driver for windows 7 on this web site.

  Have you tried this site ?

• Can't uninstall DisplayLink Core Software on a laptop Sony Vaio (VGN-NR110E model) for a Windows Vista upgrade to Windows 7.

  Hi, I wonder if there is someone who can help me on this issue because it prevents me to install Windows 7 on my laptop.  I have a Sony Vaio VGN-NR110E model, and when I try to install Win7 it tells me that I must first uninstall DisplayLink Core Software.  I went to my control panel to uninstall the program, and it doesn't let me, saying another program he has in use.  On this forum, someone suggested that I'm trying to boot my laptop in safe mode, and it can allows me to remove the program there.  My concern with this would be if I remove this program in Mode safe, how could make sure I'd be able to re - install DisplayLink Core Software should anything go wrong when I try to install Win7?

  The other question I have is there are two other programs that appear to be linked to DisplayLink Core Software.  They are called SONY VGP-UPR1 and there is another utility called program SONY VGP-UPR1 (display Adapater). If I deleted those first, it seems that it can release DisplayLink Core software should be deleted.  In this case someone has already tried that and had success?

  Could someone install Windows 7 on a Sony Vaio VGN-NR110E?

  Hi RC2076,

  Welcome to Windows 7 answers Forum!

  From what I can see SONY VGP-UPR1is a USB docking station for VAIO, try to temporarily disable by right clicking on the program. You can go ahead and uninstall the software basis of DisplayLink, as long as you have the CD for this software.

  Once you are done uninstalling, you can install Windows 7 and later you install DisplayLink Core Software and select then the other two programs that are linked with the above mentioned software.

  You can also run the Upgrade Advisor and check it out. Here is the link to download the Upgrade Advisor.

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Integrated motion Eye webcam does not work after installation of own Windows 7 64 - bit (Sony VAIO VGN-AR770)

  Hi, I'm having so much worse for my webcam to work again after a clean installed Windows 7 64-bit (I used to run 32-bit vista). I searched the net and found many many people with the same problem but no solution yet that works for me. My last attempt:

  I manually installed these drivers recommended on this forum: http://forums.techarena.in/vista-hardware-devices/1135698.htm

  With the help of the method 'have disk '. Installation seemed to happen, but no program does not recognize my webcam. Skype, for example, seems to work, but the video is just black.

  In Device Manager > features the webcam is listed as "RY5U870/VGA-CAM F01_UVC of Imaging.
  "and noted that"this device works fine."" Many people have suggested to try to download the originals and installation using Vista compatibility, but I can't get these drivers to 64-bit, and when I download the 32-bit drivers, unfortunately they do not work.

  I understand that I hit a wall here on my laptop model Sony support (now obsolete), but I feel that there must be a work around that people found out there somewhere. Can someone help me get my webcam goes again?

  Windows 7 64 bit

  Sony VAIO VGN-AR770

  Hi BraveRutherford,

  Please see the following positions with similar questions and possible corrections:

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/40c2e84f-1213-4427-b84c-c0f6470eec90

  http://social.answers.Microsoft.com/forums/en/w7hardware/thread/8b0ecfd6-0fc7-44a1-A10c-938c7b422407

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to fix the fingerprint reader of the problems of compatibility with WIN 7 Sony Vaio VGN-SZ260P

  The fingerprint reader does not work on my laptop Sony Vaio VGN SZ240P since I've updated from Windows XP.  There must be a problem somewhere online.  Everyone fell on this problem yet? And if so how do solve you this problem?

  Hello Jason,

  This will be a little problem. The only available fingerprint driver is for XP, the operating system on this computer comes with. There is a driver at this location: http://esupport.sony.com/US/p/swu-download.pl?mdl=VGNSZ240P&upd_id=2134&os_group_id=13 which works on Vista with "loss of functionality.

  So, if you have a 32-bit Windows 7 system (it will not work in a 64-Bit environment) do the following: download the XP / Vista driver and install it. Once its installed go to the program icon or the file itself and right click on it, selecting Properties in the window that opens. When the new window opens, go to the top row of tabs and select the Compatibility tab. When that shows check the box run in compatibility and mode in the drop-down list that appears, select Windows 7. Then select Apply and after that finishes select apply to all users. That brings up the same menu for all users - check the compatibility in the Windows 7 box, click on apply, then click OK and click OK.

  If something does not work as I've described, post here with details and I'll try to work through it, with you. Let me know if this solves the problem for you.

  Kind regards

  BearPup