Sony XBR-55X850D audio sync problem with Xbox One S

Similar Questions

• Audio sync problems

  I am a wedding videographer who has a few months ago, from FCP to the PrPro CS5. I am currently working on a wedding ceremony where I have some audio synchronization problems. I filmed the wedding with 3 cameras high definition. The video was filmed all HDV 29.97, with 32-bit audio 48000khz. In addition, I used microphones tie for the spouse and the officer, each record to a device in the WMA format. I used "free mp3 wma converter" (which may be part of the problem!) to convert the WMA in 480000khz 32-bit WAV files. After using HDV Split to ensure that there are no breaks, I have imported/captured everything in first CS5. Once I dropped everything in the timeline panel, I find the part in every audio layer where the officate said thank you, "you can be sitting." I created markers not numbered to the exact frame that starts and all the video layers 3 and 5 audio layers becomes synchronized. However, when I scroll further down the timeline, something badly screwed up and I don't know if it's the video w / audio layers, or if this is WMA files that I have converted to WAV. Any help would be great!

  There are several discussions on the use of a separate Audio recorder and the OOS issues. Much discussion was provided by a few of us "old-timers," who bemoaned how things were to be, when the movie camera was attached to the Nagra, and could be configured to provide synchronization of Crystal, but that does not seem possible today with our great digital equipment. Should be easy, but it is a difference in "clocks".

  Hope just to get this straight, as I blew it away last wire - one single user with Zoom Audio recorder has found that the Audio derived from 100.3%, used if just the Stretch tool w / maintain Pitch to address that. It took experimentation, but when he found the % correct, it fixed everything.

  For questions of a general nature OOS, this ARTICLE could offer some advice, but in the end, I think finding the % of drift, will fix everything for you and with this same equipment, will still work. Test now will be dividend in the future.

  For some additional information, I search on this forum for 'sync' and maybe filter the_wine_snob (me), or Jim Simon and read. Jim is the user who found the exact % that was disabled, as well as sound equipment made of marriages.

  Good luck

  Hunt

  PS - just ignore the elders moaning in our drool cups.

• Material RANE/Serato SL2 SL3 SL4 Core Audio Port problem with El Capitan

  Hi Apple,

  I and many others have had problems when using devices with Rane Serato DJ software where the breaks down of software, nor will we get audio drop-outs and crashes.
  (Audio Interface) device that I use is RANE SL3.

  MacBook Pro (retina, 13 inches, end of 2013)

  Version: 10.11.2 (15 c 50)

  Intel Core i7 2.8 GHz

  16 GB 1600 MHz DDR3

  Iris 1536 MB Intel

  1 TB SSD

  Serato have updated their software (1.8.1) to take in charge the last OX El Capitan (10.11.2) and announced that the problem is with the drivers of RANE and Serato not.

  See Site for more information: https://support.serato.com/hc/en-us/articles/213821528

  RANE said its now a problem with Apple and is a Port Audio problem. Please see their announcement about the update of BEEF: http://dj.rane.com/support/knowledge-base/el-capitan-update

  This is the Forum for discussion with RANE, saying they are awaiting your response on fixing this problem.

  here: http://dj.rane.com/support/knowledge-base/el-capitan-update

  Rane suggested only that downgrade us our BONES to the Mavericks or Yosemite. This should not be the case!

  We need answers, and for not having spent somebody else as everyone pushes the blame.

  Please you can find what the solution is rather then downgraded to a previous operating system. It's a very frustrating with all the people who spent loads of money on a Macbook and RANE hardware especially this time of the year where we DJs play every weekend like our jobs.

  Hope this gets sorted soon
  Concerning
  Anthony

  This is a user forum. While we, users can sympathize, is not in our power to resolve this issue if it's a bug.

  To allow Apple to know of this problem, you must use the appropriate feedback chanel.

  http://www.Apple.com/feedback/

• Sync problem with Palm Tungsten E2 & PC - Fatal Error Message on the screen of the PDA

  Recently my Palm Tungsten E2 will not synchronize with my PC. The following message appears on the screen of my handheld Palm when it tries to sync: "Fatal Error. ' Mgr.c, Line System: 4038, error launching Application. And a "reset" icon under the message that when activated, cause my PDA to reset through the sequence of the display date/time, etc. My PC system is Windows XP Professional. I recently updated my program to sync Palm from 4.2 to 6.2, which does not fix the problem I have. Your suggestions please?

  For this type of error, you need to reset hard E2. I hope that you have all your data in Palm Desktop. After the hard reset, change the desktop hotsync conduits replaces handheld and synchronize.

  Click on the following link for the Web page of kb.hpwebos.com for the article about reset procedures

  http://KB.hpwebos.com/wps/portal/KB2/common/article/887_en.html

  You can export your data for backup purposes, first in case something happens during synchronization.

  The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.

  Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.

  http://KB.hpwebos.com/wps/portal/KB2/common/article/28734_en.html
  Make sure you only select everything for the beach in the export window.

  With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.

  Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.

  With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

  For reference purposes, click the following link to the support page for your device on the kb.hpwebos.com Web page.

  http://KB.hpwebos.com/wps/portal/KB/na/Tungsten/E2/unlocked/home/page_en.html

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

• Problems with Xbox Hd Video Downloads

  I have a rt 32 GB surface and I'm running into a problem with the download of hd video I bought. the download comes to 7% that goes all the way to 99% down to 0%. This happens repeatedly, the network connection is solid, and all other content sd downloads very well. can someone help me?

  Hi Adam,

  He looks at the file you download may be corrupted or needs to be replaced.
   
  I suggest you to perform disk clean and start the downloads.
   
  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-in/Windows-8/delete-files-disk-cleanup
   
  Reference:
   
  Buying and renting videos using Xbox video
  http://support.Xbox.com/en-us/music-and-video/video/buying-and-renting-videos
   
  If the problem persists, you can post the question in the forums of Xbox support for further assistance.
  http://forums.Xbox.com/xbox_forums/xbox_support/f/3144.aspx
   
  Hope this information helps. Response with status so that we can help you.

• Help with xbox one

  Is anyway I can project my screen of mobile phone (samsung galaxy s4) to the TV using my 'Xbox ONE' on its last updated?

  Hello

  Your Question is beyond the scope of this community...

  I suggest that repost you in the Xbox Forums.

  "Xbox a Preview program FAQ.

  http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

  'Home'

  http://forums.Xbox.com/

  "Xbox forums.

  http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

  _________________________________________________

  "Xbox Forums directory.

  http://www.Xbox.com/en-us/forums

  General

  • Home/FAQ/Forum policy

  • Community general discussion

  Material & Discussion Services

  • Equipment & Services

  Xbox support
  Agent hours: M - F 09:00-17:00 PT

  • Xbox 360 support

  • Xbox 1 support

  • Xbox on supported mobile devices

  • Xbox on Windows support

  • Networking of hardware information

  • Material information TV

  Law enforcement forums

  • Xbox 360 account Suspensions & Console bans

  • Account Xbox one & measures Console application

  • Announcement
    PLEASE READ. Introducing changes of case review & forum

  Technical support of Xbox Live rewards
  Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

  • Xbox Live rewards program announcements

  • Xbox Live rewards Questions

  See you soon.

• How can you fix audio sync problems when editing DVD of imemories

  When I import video imemories on dvd in Adobe Premiere, the sound is out of sync. Have a fix for this?

  What format files are imemories give you? You can do a scan with the free utilities GSpot or MediaInfo (Google for download source) and post their results here.

  The smallest unit by which you can manually adjust the audio track in the MEADOW is a single image. To do this, you right-click the track and loosing audio / video, then do drag the left/right audio if necessary (or use the shortcut (Adobe Premiere elements 11 * using default shortcuts) to shift the).

  See you soon,.

  --

  Neale

  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• Elements 8 video audio sync problems on burn

  My apologies if this is the wrong place / way to go on this issue, but maybe someone can redirect my question to the correct place, if this is not the right path to follow on that - after a lot of research, I can't find answers on other posts / comments.

  I am runing Elements 8 and have had experiences format / accidents other noted. However, I kept fighting and developed a project simply consising of DV video and standard photos (jpg) with musical sound appropriate as support (mp3).

  When I now have all produced a DVD to work, in all other aspects, as I intended, my last frustration relating to audio and video of specific clips are not synchronized. While the audit and the video appears in perfect sync when played through the timeline once the burning process is complete when played as a result out of sync (by more than a second in some cases). This out of sync can be observed when the TS file is executed in windows media player before the file is burned on a DVD (so not a problem of the burn DVD I guess).

  This would indicate that this is not the DV download process that is involved, but the burning process (I burn on a file, first). I was initially background rendering (knew I had a choice) but to burn it later did pass this off but having no significant impact. It doesn't seem to be all the clips, but a number of them (they are all from the same source).

  I'm running a pretty good system with an Intel i7, 8 GB ram and am running vista (not a strength of the system!).

  Any suggestions as to why the desynchronization appears as a result of the burning process would be welcome.

  Thanks in advance.

  Steve

  I'm not an expert on the phase of creation in the Meadow, but here's what's happening again and many other programs complete creation:

  When we had imported assets, related to Menus and all other navigation settings, they will burn (file, Image or disc). According to what has been imported, still takes the size of the selected drive and is studying the assets. If necessary, it will be to Transcode the active movement to MPEG-2 and mux the video and Audio. It will create transcode files for this purpose. These are then left in the media Cache. Once completed this transcoding, yet then assembles materials in the order of DVD-video and written the necessary files, like the VOB. These are then written to a folder wrapped in an ISO file or burned directly on the disc. According to what is done, these files will not be abandoned on the computer after the burn process. Fact.

  It's just a theory: If PrE follows very closely to this workflow, if perhaps happened by transcoding, say for a burning earlier and then make changes to the project, it could be that PrE is always trying to use these transcodes older files and that it is not picking up the changes made to the project. This can happen in still, and clean the media Cache takes care of it. Links to these previous transcode files may be messed up. Something like that could happen here - maybe not exactly the same, but similar.

  Still has a process of toolbar to clean or remove the media Cache. I don't know if the pre is similar, but do not think it does. Perhaps someone who knows what is the process of creating "under the hood", about PRE, can offer some thoughts. Steve? RTA? Anyone?

  I will also burn a small project in pre (something that I have to admit that I did only once, as I still use it) and just see what files are created and where they are created, before the physical burn.

  Thanks for your comment and happy that you got this synchronization "online!"

  Hunt

• Video audio sync problems

  Hello
  
  I have a video app that I'm building - and before I used FMS and TCP connections for the video. Now, wait to be much lower than with UDP latency, I implemented in my application and stratus as capable server RTMFP UDP. I used the video phone sample application tutorial a simple sendStream and receiveStream for video.
  
  However, unlike the application hosted itself, example my audio and video are completely out of sync - 4 seconds! I tried to look at the sample code to see if there was any special settings that have been made. I have found none.
  
  My questions:
  
  1 adobe there special settings in their hosted example application? If so, what are they?
  2 are there timing issues known with the help of RTMFP connections for video?
  3. what other also problems of audio video synchronization to face someone?
  4. If none of the above is true, what do you think are my mistakes? Please let me know if I need to add information to answer this question.
  
  Thanks in advance.
  Rohan

  with RTMFP, video and audio can go out of sync if your stream flow exceeds the capacity of your network. video is currently being sent with a reliability of 100%, so once it has queued for transmission, it will be sent (eventually). video is lower priority audio, so audio gets dibs on the capacity of your network. If the video stream flow is higher than what is appropriate for your network (after audio), video data will be back until its send buffer is filled, new images of the camera will stop to have captured him. in steady state, this may look like a multi-seconde shift between video and audio.

  try to lower your rate/quality video so that it fits in your network quality. video and audio should remain synchronized.

  with RTMP, there is a buffer of network transmission (TCP) for all parts of your stream (audio & video). When you have enough bandwidth, the TCP buffer will fill up eventually and video images will stop at been taken into account to compensate. so while the audio and the video might stay synchronized, the total end to end latency will increase. When you use RTMFP, the audio and video have stamps of independent transmission, so in the event of insufficient network resources, audio of the highest priority should be faster but the video can be left behind.

  -mike

• Audio visual problems with Windows XP

  I hope someone can help me - I have a problem that's driving me crazy! I have a Satellite Pro A120, running Windows XP.

  It began during the last week, ever since I got an update. Computer starts fine, but when I open some software (Word or Outlook), the screen seems to jump and my familiar taskbar going green/blue grey - not the same as the taskbar Windows classic because the Start button is displayed in a big.

  Added to that I lose sound so I can not play videos - I opened to the top of sounds and Audio devices, and nothing is selected with the shaded volume bar and the pointer to the left. Also, I have my Office 2003 programs put in place to open in a nice shade of blue... but now they open in gray. More depressing!

  I have a round work is to "let it happen", back on the desktop, select the Windows Classic theme, then the XP theme, then go to the run menu, type services.msc and 'start' Windows Audio and then everything seems OK... until I start it again!

  Have tried setting a Restore Point earlier - this has not solved the problem.

  Have you tried the patch XP KB 935448 from the Microsoft support site - this has not solved the problem.

  Phoned A Tosh and speaks at a high-level technician (sweet girl) who really can't help me... have forced me to re - install the latest version of the sound driver she thought it might be a hardware problem - can not see it is a hardware problem myself.

  Grateful for any help. Thank you very much.

  Hello Lindsay

  First of all, I must say that it is really not easy to deal with such problems, especially for the technical support agents. They must define if there is some hardware or software problem designed Toshiba. It's really not easy to be able to relate to this suddenly or after update problems.

  If system restore didn't help something serious. Maybe you should really backup your data and do some clean OS install.

• audio sync problem and cc animate animation

  1. more audio / timeline that includes a slide, most animations will play out of sync because the blade continues to play. the animation seems to be trolling the audio at the end of the slide.

  Executives jump script is certainly a problem, but I have ways around it without having to cut the audio. Suppose you want to trigger a code engine animation after 2 seconds of frame skipping, and you want to stop jumping images after 10 seconds, this kind of approach works well (this example is 24 frames per second, changing 24-other values for other frame rates):

  var starttime is createjs. Ticker.getTime ();

  var firstframe = this.currentFrame;

  createjs. Ticker.setfps(25) (24);

  createjs. Ticker.addEventListener ("tick", movealong);

  self = this;

  setTimeout (CodeAnim, 2000);

  setTimeout(AtEnd,10000);

  This.Stop ();

  function movealong() {}

  var = now createjs. Ticker.getTime ();

  var f = Math.floor ((now-starttime) / 1000 * 24 + firstframe)

  self.gotoAndStop (f);

  }

  function CodeAnim() {}

  set the animation code course

  }

  function AtEnd() {}

  createjs. Ticker.removeEventListener ("tick", movealong);

  }

• BlackBerry curve 8330 sync problem with windows xp

  Hello guys,.

  I have problems of synchronization of my new blackberry curve 8330 with windows xp on vmware. I have a macbook, one that can run mac os and windows os. For work, I have TO use windows, so I run windows xp using vmware fusion. On windows, I've run my database, I synchronize with outlook 2003, and then synchronize outlook with my phone.

  I used to have a treo 600 and did very well. but with the blackberry, it's Hell!

  I uninstalled palm hotsync and downloaded blackberry Desktop Manager 4.7 on my vmware windows) side of my mac. The problem occurs when I connect the USB with the laptop and blackberry. the wmare window shrinks (goes from full screen to half of the screen and the screen turns black), with an error of vmware:

  "The 'Research In Motion RIM Composite Device' device was unable to connect to its ideal host controller. An attempt will be to connect this unit to the best available host controller. This can v undefined behavior for this device. »

  I click ok.

  then the display returns to live (not black) and usb takes over the device (showing on Device Manager), also showing the connected device and PIN on the Desktop Manager (DM). On the dm, I can set up the calendar, notes, etc. for synchronization (outlook sync with the device or replace one or the other). but when I click the sync button, nothing happens, no synchronization occurs, or the device on outlook, or dm.

  Lately, I did the following: go to the control panel of USB devices on the settings for this virtual machine window, and then select enable USB 2.0 support. still nothing...

  don't know what to do, any help would be greatly appreciated.

  Thank you

  --H

  Another question - the Blackberry is displayed in the Device Manager window?

• Video/external audio sync problems

  So I recorded the video of playing me the guitar and record audio to a separate computer, to be imported and synced up in post pro. My problem lies in the fact that audio and video are not synchronized rising due to my ability to cut and move the audio into a single framework. I have disabled the function of hanging, but it doesn't seem to help. It's a little less or just past a perfectly synchronised result. Can I trim/move the audio inside of Premiere Pro or what I have to guess and to restore the cut sound by 1/4 of a second by that it is disabled?

  For any question, please ask! I usually work in Cubase where publishing is going so deep as milliseconds and samples, so you can see where it's just a little frustrating... Thanks for any help =)

  Vincent M. Ippolito

  SRS Productions

  In the properties of the program monitor (menu from the top to the bottom right), click on "Show time audio units", this should allow you to edit sample level and milli seconds, you can choose in the settings of the sequence. Even without that, you should be able to get audio through a frame, 1/30 sec.

  Richard Knight

• BlackBerry 8520 Smartphone sync problem with BES 5.0.2

  Hello

  I have a BB 8520 with FW 5.0.0.681 synchronization with a BES server. Since I pluged into the computer to synchronize the contacts manually and not through the wireless, wireless sync account e-mail no longer sync.

  I tried to delete and cancelled the Service Office Service book but nothings changes. BTW, I only have two more accounts set up through the page Web of BES and they synchronize correctly.

  Any ideas?

  Sincerely,

  David

  Hi again,

  I realized what was wrong for synchronization after wyping... I used the BB with BES and BIS and BIS keeps configuration even if BB wiped which is logical because it is not portable by the BB...

  That's why I manages to get emails in the office mailbox... I feel better now that it is resolved

  ++

• BlackBerry Smartphones appointment recurring sync problem with Outlook

  Outlook 2003 SP3 has been synchronized with my curve perfectly until a few weeks ago.  Suddenly the clock wants to remove all my recurring appointments in my calendar in Outlook - hundreds of them.  I opted for no synchronization.  After reviewing the forums, I found a recommendation to delete all files from my Intellisync folder and try again.  So I did, and then resync the value upward my Desktop Manager and started around.  Amen - he wanted to remove all my recurring appointments, so I advanced and accepted the additions to my Outlook.  Now I have duplicates of all appointments on my BB!  My vision is OK, but it did not get my BB calendar additions.  Sheesh!

  Want to a * beep * (who really does not go through and remove all duplicates!), I would of course like to some lawyers!  Thank you in advance.

  hook up desktop manager backup and restore-advanced-find calendar on the right side and click on the clear button (make sure that the device is plugged)