Sony Xperia z3 Turned off and will not charge after being immersed for about 5 minutes

As the subject says. My Xperia Z3 was submerged for about 5 minutes in less than a foot of water. He was in charge at first, then it started to vibrate. The model will thus: 1 (typical to indicate the load power) Vibration, then a Triple vibrator. At this point the LED on the phone turns off. Now he's going to restart this process again and again until the phone is disconnected. That submerged while the phone components were closed and did not open. As far as the damage is concerned, it is a crack in the root of the hair in the backglass and part of the bezel has started to peel off near the camera for unknown reasons. Once again this damage is very slight, and only someone who knows what the phone looks like new would see same. Any help would be apperciated.

I'm sorry to see it, but you will need to contact your local care Xperia

http://support.sonymobile.com/global-en/contactus/

Request a trial of vacuum.

The crack may be the cause of the water damage.

Tags: Sony Phones

Similar Questions

  • My IPad sudenly turned off and will not restart. It is fully charged.

    My IPad sudenly turned off and will not restart. It is fully charged.

    What you have tried so that he could begin until For example you soft-reset/reboot trieda? Press and hold the home button and sleep for about 10 to 15 seconds, then the Apple logo will appear if all is well and it will start.

  • Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

    Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

    He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

  • Pavilion g6 turned off and will not turn back on

    My g6 kept turning off unexpectedly, and now it will not even turn around.  Help, please.

    The fire being orange means that the computer is "charge" of the battery.  If it is always orange and never goes back to white then there is something wrong with the battery because it is not that it is fully charged and the continuous computer to keep it loads or not related that she stopped.  This could be a battery problem or a problem with the computer loading mechanism.  It's probably more with the battery what either.  If you can get the computer to boot with the battery and you can get the HP utility Center to open, you can have it run a test on the battery and give you information about your battery.

  • My daughter IPhone 6s collected not from one day to the next.  Tried the portable charger all day.  Now turned off and will not turn on.  It does not get wet or damaged.

    My daughter has a 6 iPhone 4 months old.  She did not the last update.  Last night connected to load, it did not.  I thought that the cable may be defective.  Portable charger I tried today to school, did not work.  Just had it plugged into the wall for about 2 hours, now completely off and we can't get it back on.  That he suffered no water or other damage.

    First try to clean the port of lightning on the bottom of the phone. Use a bright light and a non-metal probe, like a wooden toothpick or plastic. Check the USB adapter and cable; Try one another adapter and a different cable.

    Then take it to an Apple store. It is covered by warrantly

  • I've updated my adobe plugin but FF continues to turn off and will not perform the update. I can't use FF if it maintains this doing.

    I have an error message and cannot play the videos on yahoo and a variety of sites. I click on FF to check the updates, but it gets stuck 'connection with mozilla '. I like FF, but I have no time to solve such problems.

    Hello phxpuma, adobe has released a critical fix for a vulnerability in its version of the flash plugin, which is apparently already exploited in the wild. That's why firefox will block the precarious versions which run by default on Web sites for your protection. https://helpx.Adobe.com/security/products/Flash-Player/apsb14-27.html https://addons.Mozilla.org/Firefox/blocked/p794

    Please update Adobe Flash Player version 16.0.0.235 as soon as possible, that you can download from http://www.adobe.com/products/flashplayer/distribution3.html (use the windows exe for plugin-based browsers).

  • My windows xp crashed and will not charge. I have the original disc of gold and reloading has so far as to ask the key 25 digits

    My windows professional xp crashed and will not charge. I have the original, but on the sticker affixed on the packaging it sayswindows xp pro genuine adv engl 16 h intl live cd NO KEY - so I did not have a key. I also have a professional windows sp2 oem disc with a yellow key sticker license but apparently is not the correct key to activate my drive in genuine advantage kit. Where can I get this key please?

    Hey Derek,

     

    Thanks for posting your query in Microsoft Community.

    From your description, it seems that you cannot activate Windows Genuine Advantage Kit after crashing Windows.

    I suggest to follow the steps below and we update on the State of the question.

    How to activate Windows XP:

    http://support.Microsoft.com/kb/307890

    Update your Windows product key:

    http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key

     

     

    Frequently asked questions about the Windows Genuine Advantage Kit:

    http://support.Microsoft.com/kb/932301

     

    For all windows questions do not hesitate to contact us and we will be happy to help you.

  • My safari has stopped working and will not charge

    My Safari has stopped working and will not reopen little matter how hard I try. I was told to paste some information on this forum.

    Try to open Safari in safe mode.  Make sure Safari is no longer running, the black dot in the icon on the Dock should not be visible.  Hold down the SHIFT key while clicking on the Safari icon.  If Safari loading, the problem is related to the third-party extensions or plugins.

    If Safari is slow, unresponsive, which closes unexpectedly, or has other issues - Apple Support

  • Satellite C650D - Activate Wi - Fi is turned off and does not turn on

    Computer laptop Satellite C650D 006011 will not Wi - Fi switch on, even by Conectivity doctor or Instructions from Toshiba. F8 key does not appear on the monitor when the FN key pressed to activate a Wi - Fi connection.

    Laptop is about 12 months, a Wi - Fi connection worked initially. Have reinstalled the Wi - Fi drivers in an attempt to activate the e-mail... always to turn on Wi - Fi to connect.

    If the WLAN card is listed correctly in the Device Manager you should not reinstall WLAN driver. Driver WLAN has nothing to do with ON / OFF feature.

    > F8 key will not show on the screen when you press FN key
    Your problem is not WLAN driver and the functionality of the FN.
    Add the value of Toshiba install package.

    I can't get it for you because the description of the model 006011 C650D is unknown to me. Please recheck the model name and model number. You can find it on the bottom of your laptop placed on the sticker of Toshiba.

  • 6plus iPhone will not charge unless it is turned off. Will not recognize an apple cable or other. Download accessory not supported message.

    IPhone 6 with charge is no longer at least that turned off. Tried blocks and cables apple and spare parts. Download accessory not supported message.

    iOS 9.3.1

    Could damage the material due to the use of cables not Apple, etc., which is why you see the, "accessory not supported."

    Probably need to repair > https://www.apple.com/support/iphone/contact/

  • Audio default HDMI output goes to "not connected" when the receiver is turned off and does not reset as defdault when the receiver is turned on

    I have an NVIDIA HDMI output connected to audio receiver 7.1 Onkyo TX - NR. 818.  It is defined as the default output.  When connected, it works well.  When I turn off the receiver, the output goes to "not connected" and scene of my returns instantly becomes the default.  When the monitor is switched on again, the HDMI out remains "not connected" and audio is directed to the monitor.  If I unplug the pc HDMI cable and reconnect it, the HDMI from the receiver instantly responsive as default device.  How can I stop her from doing this change, whenever I have turn off the receiver?

    Hello

    Try this: http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio-e-g-Windows-8/Nvidia-HDMI-Output-quot-Not-plugged-in-quot-Audio-not-going/m-p/1001191#M16981

    Good luck.

  • my computer is turn off and gets very hot after a half hour

    for some time my computer is to do really hot after half an hour when im using it and then after a few minutes its deactivation and I have to wait like 20 minutes because he does not want to go back. It has been like that before, but it's only like 4 times... but now for 1 month it turns off... Please help me.

    Hello

    Question of heat and ventilation. If a PC remove ALL power and reinstall the cards memory and cables (both
    in fact, ends) - remove and replace them - are not just tight. Try adding a small fan blowing in or
    through the ventilation openings.

    If those who don't erase the question that you should seek immediate help from a real computer (no leeks store
    and the glances at a BestBuy or other big box stores) or the manufacturer of your system Support.

    Heat can cause very serious problems with your hardware in order to not try to solve this one more
    minimum without professional technical assistance.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • ScanDisk will not work after being planned in Vista

    Click on: drive > properties > tab.click Tools check for errors and check the two boxes.to automatically fix the file errors.and to check and recover bad sectors.reboot.no scandisk.just directly in windows.it it rub the simple 3-step windows scan breast... but not the full scan that I'm wanting.this is the only pc I've seen who has this problem , and he always does after a complete restoration of the original image.

    * original title - why the schedualed error checking is not working after reboot, (win ista home premium 64-bit) *.

    Hi magicman77,

    1. you try to perform disk error checking on the drive on which Windows is installed?

    I suggest you to schedule chkdsk /r to reboot following the steps mentioned below and check if it helps:

    a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.

    If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

    b. type the following command and press ENTER:

    Chkdsk /r

    c. When you are prompted to schedule chkdsk at the next reboot, type 'Y' (without the quotes) and press ENTER.

    d. restart the computer.

    WARNING:
    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Reference link: check your hard drive for errors

    I hope this helps.

  • Windows 7 says that's not true, after being installed for some time. Does system restore or recovery.

    I installed Windows 7 Home Premium 64-bit for system integrators that I purchased from newegg. It has been installed since April / May and worked fine until now. I've tried some other solutions to this problem, and none of them seemed to work for me. Here are the diagnostic information.

    Diagnostic report (1.9.0027.0):
    -----------------------------------------
    Validation of Windows data-->

    Validation code: 0x8004FE21
    Validation caching Code online: n/a, hr = 0xc0000022
    Windows product key: *-* - 2V8MX - 6W6FY-QV9G3
    Windows product key hash: 7OKQvU3zqMLEBwJbyNvbLLvP9E = +
    Windows product ID: 00359-OEM-8702173-90703
    Windows Product ID Type: 3
    Windows license Type: OEM System Builder
    The Windows OS version: 6.1.7600.2.00010300.0.0.003
    ID: {2726D545-3F1A-4942-8A34-5F2FE1E20DAC} (3)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0 x 00000009
    Build lab: 7600.win7_gdr.100618 - 1621
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 103 blocked VLK
    Microsoft Office Enterprise 2007 - 103 blocked VLK
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->
    [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
    [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
    [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

    Other data-->
    Office details: {2726D545-3F1A-4942-8A34-5F2FE1E20DAC}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-QV9G33S-1-5-21-57199979-1290623787-413427169the system manufacturer,System Product NameAmerican Megatrends Inc. 00359-OEM-8702173-90703 0901 20100208000000.000000 + 0009FBA3607018400FA04090409Eastern Standard Time(GMT-05:00)03103103Microsoft Office Enterprise 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6586414 ACD7202654E586

    Content Spsys.log: 0 x 80070002

    License data-->
    On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070426' to display the error text. "
    Error: 0x80070426

    Windows Activation Technologies-->
    HrOffline: 0x8004FE21
    HrOnline: n/a
    Beyond: 0x000000000001EFF0
    Event time stamp: n/a
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:
    Altered the file: %systemroot%\system32\sppobjs.dll
    Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
    Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
    Altered the file: %systemroot%\system32\sppwinob.dll
    Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
    Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
    Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
    Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
    Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
    Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
    Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
    Altered the file: %systemroot%\system32\drivers\spsys.sys

    --> HWID data
    Current HWID of Hash: OAAAAAIABgABAAEAAAABAAAAAgABAAEA6GEWutKcVIAGnlwaRpDEtVTyEDNWG6x3zu52JZJjQOk =

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes, but no SLIC table
    Windows marker version: N/A
    OEMID and OEMTableID consistent: n/a
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    APIC1147 APIC 020810
    FACP 020810 FACP1147
    HPET 020810 OEMHPET
    MCFG 020810 OEMMCFG
    020810 OEMB1147 LASRYVITRAGE
    SSDT A M I POWERNOW

    OK, I reinstalled Windows 7 and that fixed my problem. Thanks for your help.

  • Sony KDF-55E2000 turn off and on itself

    I have a Sony KDF-55E2000 who goes out, then back, without any input from me. The power light on the front of the TV flashes green while he's back back, like it normally does when the TV is turned on. No other lights are flashing. Is the power light blinking is not indicative of a problem typical, as indicated in the manual.

    I already contacted Sony support, but was unable to get any useful information (answer: repair). I did a power reset and restored to factory default settings, but that didn't help. What other issues may be the cause of this behavior? I'm comfortable open TV on mine and replacement of parts, as long as I have a small idea of what I should look for.

    I replaced the lamp once since the purchase of the TV. I replaced the lamp in January 2010. Until I replaced the lamp, at the front of the TV lights blinked in the expected color and style specified in the manual. Of course, this was not the case this time. I didn't open the door to the lamp for replacement of the lamp 5 years ago. Other problems potential I can guess are dust build-up causing overheating, one several fans at default, the sensor of the lamp or lamp door sensor is going bad, the pilot/ballast lamp goes wrong, or the lamp itself is bad. The problem is the behavior I see with the power light does not seem to correspond with these problems. Does anyone think any of these potential problems could be past based on the behavior I'm reports? Is there something else that could be and I could look?

    Thank you very much for the help.

    Matt

    Quick update: I bought a new lamp, installed, and everything looks great again. If that didn't work, I wasn't going to get it fixed. It just was not worth it financially. It would have been better to put the money in a new TV. But, we'll see how long I can keep this going with lamps. Thanks for the suggestions of George.

Maybe you are looking for