Similar Questions

• Versions CS6 not appearing is not in the CC extensions Manager

  I have several versions of CS6, sitting along side now CC versions, but none CS6 software appear in the new extension manager.  Means I can't install plugins for versions CS6 more?

  Make sure that you open the extension Adobe CS6 Manager and not CC

  CS6 extensions will not be displayed in the CC extensions Manager

  I hope this helps!

  Julia

  Post edited by: jgrummel

• Headphones not appearing is not in the playback devices

  There is a headphone 3.5 mm quite inappropriate on my computer, which is oriented toward the front, so if I have for example pull the wire of the headphones a little, unplug headphones in and out of my computer speakers streams sound, my family is asleep probably not want to hear. I checked "Show disconnected devices" and "see the disabled devices" in my reading , in the settings of the its tab. Is there a way to disable the real speakers and just leave the volume of the headset upwards?

  had same problem try this, open your DD realtek audio Manager and go to the options in the upper-left (Cog) click before and back devicesplayback out two different audio streams, hope it helps

• Do not open the PIX device manager

  After changing the default configuration of the internal ip address can no longer be 3.0 (1) PDM to open in IE 6. I ping the internal IP 192.168.0.1 and pdm does not work with https://192.168.0.1

  Running PIX 501 version 6.3 (3)

  Thank you

  You should do a "show http" and see if you allow hosts on the network 192.168.0.0/24 to PDM in the Pix.

  There is a good chance that this could not been changed from the previous subnet that you were using.

  Hope this helps,

  Peter

• Connection to the local network not appearing is not in the area of notification on the Windows 7 computer.

  Connection to the local network not appearing is not in the area of notification on the Windows 7 computer.

  Right-click on the taskbar and select Properties, and then click Customize.  Look for the connection and modify to display the icon and notifications.

• missing net.rim.device.resources.Resource of class, ask not appearing is not in the Simulator

  Hi all

  I use the Eclipse JDE plugin to develop my application.  It worked well until I have start using hash tables in my code.  After that my application will not work and gave error "error loading of class net.rim.device.resources.Resource.

  This class is part of the standard library and do not know what this error is due to.

  I tried to reinstall eclipse and all the plugins and now my request will not even appear in the Simulator .

  Help, please.

  Thank you

  Sri

  What M.Sohm said is true. To expand a bit about it: If you have a ResourceBundle and the package in the file .rrh statement is at odds with the .jdp, strange things can happen. And if you move a ResourceBundle in a different package, training package not updated automatically, you must address yourself.  Make sure that the package in the .rrh statement corresponds to the Package Explorer view say it should be.

  So when you add hash tables, which was the only thing that you added?

  Do not panic on the application not appearing is not in the Simulator.  When you run an application in the Simulator, build files (.cod, .jar, etc.) are copied into the directory of Simulator (\plugins\\components\simulator).  When you reinstalled, the directory of Simulator has been rebuilt from scratch, without the build of your application files.  Because you can't build, you don't get new build files to copy into the Simulator.

  Hang in there.

• Installation of older Versions of CC (not appearing is not in the previous versions tab)

  Installation of older Versions of CC (not appearing is not in the previous versions tab)

  Hi Karen,.

  If you do not get the options to install the previous version in view previous version option on the CC desktop app, it can occur for the following reasons.

  (1) If you have already installed the previous version

  (2) if the creative cloud is not enabled on your machine

  (3) with the help of a version outdated cloud creatives desktop application.

  Please refer to the following links.

  For installing previous versions CC https://helpx.adobe.com/creative-cloud/help/download-install-app.html#topic-3

  Activation of the questions Solve common Adobe Creative cloud activation of (log) and questions (disconnect) disabling or error messages

  https://forums.Adobe.com/message/8389127?et=watches.email.outcome#8389127

  To uninstall the desktop application uninstall the Adobe Creative Cloud desktop application

  For installation Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  Please let us know if the above information is useful for you.

• Why are my tool fill and sign not appearing is not on the bar and how do I solve this problem.

  Why are my tool fill and sign not appearing is not on the bar and how do I solve this problem.

  Salvation;

  What version of Acrobat or Reader are you using?  When you open the form are the fields highlighted and "complete" without clicking the 'Fill & Sign' tool to open the bar fill tools & sign?

  I suspect that the form that you opened is already ' to fill' so the fill tool & sign just offers you the possibility to sign the PDF and all filling out forms is managed the the Acrobat/Reader native app.  In the view below, I opened a 'Acroform' which is a PDF file that has form fields to fill and so the bar fill tools & sign has only 'Sign' button - it's what you see?

  

  'Fill & sign' tools are to fill PDF documents that have no form fields real (they are flat and not fillable) and is able to add text fields, annotations and signatures for the "flat" PDF

  Thank you

  Josh

• .gif picture not appearing is not in the design Panel

  I have an image .gif not appearing is not in the design Panel, but it appears in the browser preview.
  
  < div id = "footerPanvalid" >
  < image src = "images/valid-xhtml10 - blue.gif" alt = "Valid XHTML 1.0" Strict height = "31" width = "88" / >
  < / div >
  
  {#footerPanvalid}
  position: relative;
  right: 200px;
  padding-left: 300px;
  z index: 23;
  }
  
  valid-xhtml10 - blue.gif appears also in the active panel
  
  Any ideas what going on?

  Put a border around #footerPanvalid to make sure that you can see in
  The design view.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "nikos_golf" wrote in message
  News:fclmk4$39d$1@forums. Macromedia.com...
  > I have an image .gif not appearing is not in the design Panel, but it appears in the
  > Overview of the browser.
  >
  >

  
  >
  >
  
  >
  > #footerPanvalid {}
  > position: relative;
  > right: 200px;
  > padding-left: 300px;
  > z index: 23;
  > }
  >
  > valid-xhtml10 - blue.gif appears also in the active panel
  >
  > Any ideas whats going on?
  >

• Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  Original title: System reports the NIC does not properly

  Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  As none of the problems are met with connection network, do I ignore this warning or try to update the driver?

  Hi eucalyptussurfer,

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  Please see the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP 15 ac189tu not find the bluetooth device please help me

  HP 15 ac189tu not find the bluetooth device please help me

  PLEASE HELP ME

  Mr President

  I found the solution

  I have install MS 72552.exe

  & his departure find device

  Thanks for supporting.

• Cannot read Psychonauts off Steam error - the game could not create the Direct3d device. Please make sure your video drivers are installed properly

  Original title: Running Win7 on Bootcamp. Error: The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I try to play Psychonauts out of steam. I am currently running Windows 7 via Bootcamp on my MacBook Pro 13-inch mid-2010. When I try to run the game, I get the message:

  The game could not create the Direct3d device. Please make sure your video drivers are installed properly.

  I tried to update DirectX, and I tried to download the Nvidia drivers associated with my laptop model. How can I solve this problem?

  Thanks again for the help.

  I'm not familiar with Apple but I found this:

  http://support.Apple.com/downloads/#NVIDIA

  Except that it is what I have from NVIDIA:

  http://www.nvidia.com/object/notebook_drivers.html

  Previously, only the original beta for mobile graphics drivers were available on the NVIDIA site with manufacturers having full control and ownership of the final version.

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of construction LabVIEW application disables the Windows Device Manager? Help on how to diagnose the problem?

  Please can anyone shed light on this, or suggest where to look?

  I built an application using the Application Builder of LV2014 (32 bit).

  On a Win7 X 64 PC at work, it installs and runs ok.

  On Win7 X 64 PC at the customer, it installs ok, but then after Windows restarts on demand 'device manager' no longer works and there are some unchangeable registry entries associated with nipalu. The client runs Symantec security software. A client COMPUTER technician is suggesting that LabVIEW is interacting with device drivers and this is the origin of the problem, but we do not know how to go further. It is not really acceptable to deploy computers where the Windows Device Manager no longer works. Surprisingly, the application itself works always - it's just Windows which messed up.

  Thank you

  Thanks for the suggestions. The company IT guy has not been able to talk to a person in NI UK support (no one was available), but he managed to keep it down to a problem with Dell Data Protection encryption Enterprise Edition. Delete first, then install the LabVIEW application, then reinsert DDPE gave a system where everything worked.

  We have built apps that used progressively more labview drivers (vision, labview base; digital i/o)

• Intel(r) management Engine Interface cannot start (code 10), I get this message whem check the computer Device Manager

  I get this message whem check the computer Device Manager

  Intel(r) management Engine Interface cannot start (code 10)

  Thanks Ephraim

  Please provide us with your administrative Event Viewer logs by following these steps:

  Click on Start Menu
  Type eventvwr in the find programs and files (do not hit enter)
  Click with the right button on eventvwr.exe and click Run as administrator
  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download .zip here (if you can) to skydrive or a file sharing service