Sound card does not work after upgrade to XP Pro

Similar Questions

• My sound card does not work after working yesterday. "This device cannot start. (Code 10) »

  Hi support team!

  I have a HP Pavilion zv6000 and my audio does not work and I enter the Manager of devices and displays this error: "this device cannot start. Code 10 "after this I installed my audio driver from the site and still the same problem.

  With repsect, OZNalex.

  

  OZNalex wrote:

  Hi support team!

  I have a HP Pavilion zv6000 and my audio does not work and I enter the Manager of devices and displays this error: "this device cannot start. Code 10 "after this I installed my audio driver from the site and still the same problem.

  With repsect, OZNalex.

  

  Hello

  First do a hard reset.

  Please go through this Hotfix from Microsoft for the error you are getting.

  Please uninstall & update audio driver & BIOS after checking, you have such version specified in the site pilot here on the website of the HP product . Reboot after that. Do the troubleshooting in the Microsoft Fix document.

  When you're done, shut down the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key ESC that you start the computer to launch the Start Menu, and then select F10 to open the BIOS menu.  Press F5 to load the default values (sometimes it's F9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press F10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Check if its working

  Thank you

• video card does not work after upgrade to windows 7.

  When I upgraded to windows 7, my transformed into graphics Standard NVIDIA graphics card. I cannot access my media Center tv and can not play. When I update the graphics card through hp.com, my internet cannot connect.

  Update the driver for card video from this link.

  http://www.nvidia.com/download/index.aspx?lang=en-us

  mohanad

• Re: NB200-134 - touch FN does not work after upgrade to Windows 7 Ultimate

  My NB200-134 of FN keys does not work after upgrade from Windows 7 starter to Windows 7 ultimate. I tried to install all the drivers found on the Web from Toshiba website for my lappy but it still does not work.

  Help please

  Hi asalamk,

  The FN keys are controlled by value added and Flash Cards Support utility package. I think you forgot to install these tools

  You should recheck the Toshiba page and download these two tools. Start with the installation of the package of added value, and then restart your laptop. After this utility installation of Support Flash Cards. Reboot once again and all the FN buttons should now work correctly.

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Satellite 5000 with Windows XP, Service Pack 1 is installed and now my sound card does not work

  Everyone knows this problem.

  I have a 5000 Satellite with Windows XP. I installed SP1 and now my sound card does not work.

  Any ideas out there?

  Does anyone have this problem?

  I reinstalled the Yamaha drive a couple of times and always the same: no sound?

  I bought this unit in Holland and it was great until the problem of Service Pack. I heard that Comcom was a dealer right here. Maybe I'll have to make to them, if I can't help here?

• Satellite A300D-15B - Webcam does not work after upgrade to Windows 7

  My webcam does not work after upgrade to Windows 7. I installed the drivers but still having no luck

  Hey Buddy,

  What does it mean exactly when you say he won t work?
  You get an error message or only a black image? What model of laptop you have and that you use the Toshiba Windows 7 upgrade kit or a disc of Microsoft?

  At this moment I can only offers to install latest driver of the webcam of the official website of Toshiba. Make sure that this driver is released for Windows 7 and not Vista.

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

• VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

  Hello

  I upgraded the PC host, but also virtual machines to Windows Pro 10.

  TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

  Is this a known issue?

  Thank you!

  Kind regards

  Joe

  SOLVED!

  
  

  I uninstalled VMware Player, including the abolition of the configuration files.

  
  

  re-installed VMware Player and it worked!

• Pavilion dv6 sd card reader does not work after upgrade to windows 8

  Hello

  My card reader SD HP Pavilion dv6 does not work after windows 8 upgrade (6 months ago). Previously, it was working fine when I was with Win 7 (which is the default OS with this laptop).  I don't find the device in Device Manager (under the peripheral system or hard drives). Read the similar section in the HP forum, but it did not help as much as the device is missing in this case. Can anyone help?

  Hi SanSam.

  Thank you.

  Install the driver from Realtek for Windows 8 card reader.

  Please post your results.

  Best regards
  ERICO

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

  After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

  Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

  Hello

  you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

  It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
  Would appreciate comments on your success.

  See you soon

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

  I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

  Please would you give me help? I really appreciate!

  Thank you very much.

  Eleanor

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  ========================================================================

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com