sound does not play when windows vista starts or stop

Similar Questions

• Sometimes sound does not play when you play multiple sounds simultaneously

  It is also a matter of best practices, too.

  I built a game that uses many different sounds (about 48 I think). Many are short, less than a second and a few are longer, of the music cues, etc..

  Example problem: sometimes when there are a lot of play sounds and a music signal is supposed to fire, the sound of the music does not play. I did a trace on the function that plays the sound music and performs this function. Are there limits to how sounds can play at the same time? (It does not only happen to a particular sound, could be any noise)

  Also, regarding best practices, if there is a sound that could be played several times at the same time, a new instance of the noise must be created each time as its played? If there is that a single instance of this noise, will be the previous reading of this noise cancelled when it is called for replay?

  Thank you

  Adam

  There is a soundchannel 32 limit (which may exist at a given time) imposed by the flash player.  all two identical sounds may not play in a number of ms on the other.  There is no perceptible advantage and refusing the deductions that you may be able to play the sounds that are noticeable.

• His Windows logon (7) does not play when the computer starts with the automatic logon.

  If I understand my Internet search, that this is a classic problem with Win7 and Vista I had my sound connection at startup of the computer each time. It comes, of course, with the sound of starting Windows (i.e. before opening of session) disabled.

  When I log out and then log in again once I get acoustic logging, so the question is about the AutoConnect at startup.

  I would really like to know if there is any small hack or trick that I could use to allow me to get a sound at startup to logon without having to connect.

  NB. There is no security issue on automatic logon, because it is a home computer and I live alone.

  Thank you very much
  Philip Goddard.

  I'm having the same problem, I think I'll call dell and see what they say, I integrated 5.1 audio so I guess that there is no sound card. I'll post my results

• Sound does not work for windows vista

  When I turned on our laptop today it says your audio hardware configuration has changed. You must reinstall soundmax.  I went on the factory site and downloaded the player and the error still occurs.  How can I fix it?

  It affects only the system files, not personal files, see the following topic for more information about the system restore:
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Don't know why sound does not play when I read my slides in Captivate 5.5?

  I don't know why but all of a sudden when I'm working on a project in Captivate and record to the slide, and then click Play move it I play the Visual, but I can't hear the voice recording.  If I only click on the audio icon on the slide to play the record I can hear him, but he doesn't play with the slide.  Any ideas why this might be happening?

  Thanks in advance.

  Hello

  Please check if you have accidentally selected the mute button controls on the timeline.

  You'll find it here-

  

  Thank you!

  Anjaneai

• Journal on the sound does not play while preventing the disconnection of its judgment

  original title: error sound system

  When the system connects to sound does not. When the system shuts down, the message that explorer.exe plays disconnection from the sound which is not cancel and I don't force farm system who does not save my work.

  Hello

  1. What is the exact error message you get?

  2. what was the last time that the computer worked well?

  3. are you faced with the question with the sound only when the system shuts down?

  4 did you a recent software or changes to the material on the computer?

  This problem may occur if the .wav file that is associated with the Windows exit program play for more than 10 seconds.

  To resolve this problem, configure the Windows exit program to use a shorter .wav file - play. To do this, follow these steps:

  1. click on Start, type sound in the Search box and then click on its list programs .

  If you are prompted for an administrator password or for confirmation, type the password, or click continue.

  2. click on the tab sounds and then click Exit Windows in the programs list.

  3. click on Browse, locate a .wav file that plays for less than 10 seconds, and then clickOpen.

  Note By default, the following file is used to program Windows output:

  %windir%\media\Windows Shutdown.wav

  4. click on applyand then click OK.

  Access the link below for more information:

  Message when you try to shut down or restart Windows Vista: "the following programs are still running: Explorer.exe playing logoff sound."

  http://support.Microsoft.com/kb/931330

  Note: The above article is for Windows Vista. It also applies to Windows 7.

  Hope this helps and keep us posted.

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• Sound does not work in my Vista computer.

  Original title: Hello I need solving audio sound problems no need for pilots to soand but I bought this record registration of his friend's Audio microphone

  who had the same problem before selling it, he was using this compact computer Presario f700 with windows 8 pro iam woundering if I had just the befdore of windows or start them at the same time that windows vista would be reqinize drivers

  Hey Joe,

  As the sound does not work under Windows 8 and Windows vista, it may be a hardware problem.

  We will try the following solutions and check to see if the sound works.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-sound-problems

  Download and install the driver for your model of laptop vista.

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?locale=en_US&TaskID=135&prodSeriesId=3548233&prodTypeId=321957

  
  

  Note: If you use the 32-bit operating system, download and install the 32-bit drivers.

  If you use the 64-bit operating system, download and install the 64-bit drivers.

  Also check out the following link:
  No sound in Windows

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  
  

  If the problem still persists contact support forum HP:

  http://h30434.www3.HP.com/PSG/

• An embedded MP4 does not play when published as swf.

  An embedded MP4 does not play when published as swf.  The PlayBar is where. The swf embedded on the page works OK. I downloaded all the files generated to the Web site. Any ideas?

  I have not used the program for a while, so I'm a little rusty and I just know Captivate 8, so I hope I'm just something stupid. Oh yes, when I first publish and choose to view the project, he plays. If something must be different when it's moving online?

  And here is the link. I'm probably going to replace the voice to mine. My husband says that he looks like Siri and it really bugs. Mine is not great, but he assures me sound better than automated.

  http://susancvineyard.com/nav/portfolio/portfolio.swf

  Thanks for any help.

  Susan

  Post edited by: Susan Vineyard

  Make sure your video file is all characters lowercase and without spaces or punctuation characters.

  Check that your site administrator has set the video as a type of authorized file mime type.

  Link to the file that Captivate HTM publishes and not to the SWF that you did in the above link.

  Make sure that all THE published files have been downloaded successfully to the web site, including the video file.

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Why CRYSTAL_REPORT program does not work with windows Vista? __

  Why CRYSTAL_REPORT program does not work with windows Vista?

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• HP P6130Y: Secondary hard drive does not appear in Windows Vista - 64 Bit

  I installed the second SATA drive in my HP 6130Y, a 1 TB WD Black. HE appears during startup, is displayed in the home page of the BIOS password HP PC-Doctor and SMART BIOS tests.

  But he does not appear in Windows Vista 64-Bit.

  My current setup is configured as follows:

  • SATA1 - Seagate 750 GB SATA drive
  • SATA2 - DVD
  • SATA3 - new WD 1 TB drive.
  • SATA1 controller is set to RAID.

  Thanks for any help you can provide!

  Hello

  Go to Administrative Tools--->---> Disk Management in the computer management and expand the screen entirely.

  Now, look for the new drive, right mouse click on it if you see initialize and then format the new hard drive.

• Looping FLV does not play when I use addChild

  Hi all

  Kglad wrote the code below (located in a frame of a clip to child script). It works very well to seamless loop the FLV in an FLVPlayback component in this clip.

  In the main timeline, I use removeChild to remove this clip of film when it was used. Can I use addChild to add at the time where the clip must be used/seen again. (I do it to preserve the resources of the machine).

  However, when I use addChild to add the MC back, for some reason, it does not immediately play like the first time it times. He expects a cycle before it begins to play again. Does anyone know why it does not play the moment where it is added in? ('Auto play' is checked in the FLVPlayback properties.) I can post more code if necessary.

  Thank you very much!

  The code in the script of the frame of the child clip that holds the FLVPlayback:

  Fl.video import. *;
  
  FLV animation loop
  var int index = 0;
  childMovieClip.addEventListener (fl.video.VideoEvent.COMPLETE, completeHandler);
  childMovieClip.source = "FroggyTop.flv";
  childMovieClip.play ();
  readyNextPlayerF();
  
  function completeHandler (e: fl.video.VideoEvent): void
  {
  childMovieClip.play ();
  childMovieClip.visibleVideoPlayerIndex = index;
  readyNextPlayerF();
  }
  
  

  function readyNextPlayerF (): void
  {
  index ++;
  childMovieClip.activeVideoPlayerIndex = index;
  childMovieClip.source = "FroggyTop.flv"; assign the source

  }

  Post edited by: paul_james123

  The game of the FLVPlayback instance is not dictated by its presence as a child.  Using addChild does not reset it to a starting state.  If you remove it, it remains to do everything what is done out of sight of the scene.  When you add to this is probably in the middle of everything he did while sitting in its limbo deleted.  When you remove it, you should stop it, and when you add it back in you should start it.

• Audio does not play when editing my calendar...

  I had this problem where in my calendar if I press 'play' on the slide so that I can get an overview of how things work, it works through action, but it does not play the sound. I see my audio in the slide, I can hear the audio if I go in the audio editor or on the closed captioning thing closed... but when I'm actually on the timeline, nothing. I can right click on my audio in the timeline and select 'read' a so-called play just the audio, but does not slide.

  Anyone know what is happening? It's the second or third project that I had this problem with, I am currently on my updates. I use version 5.0.3.631 and Captivate 5... any help would be appreciated!

  Hello

  Look at the bottom left of your planning bar. You should see a small speaker icon. Click on it and I bet that your audio is.

  See you soon... Rick

• Audio does not play when discovers .swf in the browser

  When you view the .swf file in a web browser, the audio file does not work. The sound does not get played. However, by double-clicking the .swf file, it works very well with the sound.

  Any suggestion?

  I don't really know why the path is relative the HTML instead of the swf file.  but it's even worse: there are some things that are relative to the swf.  I don't remember what they are, but eventually the files called by the loadvars or urlloader class.

  so, you can always try both if your path doesn't work.  (btw, you use the debug version of flash player so you can see that you have a path problem during the test in your browser.)

  but the html file contains code to integrate the swf file into the html page.  then, I call it the html integration.

  in any case, all's well that ends well.  I'm glad that you have solved that problem.