Sound does not work after the computer Windows XP formatting.

Similar Questions

• Satellite U200 - sound does not work after the installation of Win8.1

  Hello guys,.

  I have some old Satellite U200-165. I installed windows 8.1 Enterprise assessment successfully after that I changed the hard drive SSD, but the sound does not work. Windows showing that his work perfectly, but it does not come out.

  An advise please.

  Satellite U200 is a pretty old and not supported for Win8 or Win8.1 machine. I think that we have no report on this forum how this old piece of equipment works with Win8.

  If the sound card is properly installed, have you checked all the sound settings?
  I presume that the same problem is with a headset, right?

• Satellite A200 - 1 M 7: the sound does not work after the downgrade to XP

  Hello!

  As in the topic I have a problem with my sound card - it simply does not work under Win Xp (under Vista everything worked).

  In Device Manager I have two 'points of inquiry:
  -Controller\ PCI memory
  -Unknown device
  I assumed that the unknown device is my sound card, but still can't make it work :/

  I've already upgraded the bios and install page of toshiba Realtek drivers.

  Really need help.

  Adrian

  Hello

  No sound after installing XP operating system. What to say man I searched here in the forum similar threads and it seems that it is a common problem.

  But you worry about don t; I think that I found the key ;)
  After installing win XP, you must update the latter State. Install all the patches and hotfixes provided by Microsoft. You must use the website to update Ms. The tool on this page checks the system and selects all necessary updates!

  Very important are the patches; KB888111 and KB835221
  These hotfixes must be installed before installing the sound card driver.

  The Realtek sound card driver can be downloaded from Toshiba or on the official website of Relatek page.

  By the way; It is very important to install drivers in the correct order. On the Toshiba page, you will find the installation instructions. So please follow the guidelines mentioned in this doc.

  concerning

• Windows 7 Aero does not work after the computer and Lync 2010 screen sharing session force shutdown

  Hi guys,.

  I can't activate Aero, my theme is stuck on Basic after that I got a power issue and forced stop running Lync 2010 screen sharing (this disables Aero but it turns on when the sharing is stopped).

  I'm running Windows 7 Ultimate x 64 on a workstation with the following specifications:

  CPU: AMD Phenom II X 4 955

  RAM: 16GB DDR3 Corsair

  GPU: nVidia GTS 450 (1 GB of GDDR5 memory)

  My Windows experience index is 5.9 (determined by HDD SATAII, the rest scores are higher than 7).

  Troubleshooting I executed before writing these lines:

  • Updated my nVidia drivers
  • Checked the themes and DWM Session Manager services, both started, both the Auto value
  • Ran the store built, the problem cannot be resolved
  • Running the Wizard Microsoft Fix It, he pointed out that my graphics card does not support Aero Glass

  So the GPU is not the problem, I've been running Aero until this problem has occurred.

  Any ideas?

  Thank you!

  Hello

  It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum.

  You can follow the link to your question:

  The customers TechNet Lync and devices Forum

  http://social.technet.Microsoft.com/forums/en-us/ocsclients/threads

• Deliver the sound does not work on the computer.

  So sometimes the sound on my computer works just simply. This problem occurred recently: after watching a few movies on the computer using a double headphone output (I was watching with my sister) it worked fine, no problem. A day or two later, I tried to watch a video (on headphones) and the left earphone wasn't working - no sound didn't go out. I figured out the headphones were very good, but it's the computer problem. He started to work again the next day, but then most problems - sometimes no sound at all. No speakers or the headphones. Ever since then, it's like Russian Roulette, sometimes it is sound, sometimes it does not. I just wish the best. I tried troubleshooting and he said that he could not detect any problems. I tried to it turn on and off again? Yes, several times.

  I'm desperate for help! Thanks in advance.

  Hello

  If the computer has a separate sound card remove ALL power and then remove and reinstall
  the map. If it's built-in sound so either she developed a hardware problem or
  something interferes with him. If the device goes wrong it may be replaced if

  a separate device or it can be disabled in the BIOS or Device Manager and
  a card can be used OR a USB card sound.

  Check in the Device Manager - Sound - Driver tab - go to the site of the manufacturer of the audio device
  Download and install the latest driver.

  ========================================================

  Sometimes 3rd part antivirus/security or another program may be causing interference.

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8/8.1
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx
  =========================================================

  Check with support from the manufacturer of your system (manufacturer of motherboard for customized systems) their
  online resources and the drivers and ask questions in the forums about known problems.  Or
  with audio device manufacturers / real sound if a separate device/map.

  No sound in Windows - use the troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab3&V3H=winvistatab1&v4h=winxptab1

  =========================================================

  Check if you have the latest available driver. Download and install the latest driver.
  If you have the latest driver to re - install the same.

  More troubleshooting if necessary:

  Microsoft - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  What happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Satellite P300 - Value Added package does not work after the computer restarts

  Hello

  I have a Toshiba Satellite P300 PSPCCA Windows vista ultimate x 64. I can't do my work button soft touch. I downloaded latetest VAT package and installed. After installation it asks to restart but I restart my laptop and I make just restart Flash Card and my button works all good touch app that is silent, Media Player, etc., but once I restart my laptop it stops working.

  I tried the uninstaller and reinstalling but no luck. I read in the forum toshiba on running CCleaner and do a fresh install but still have the same problem.

  Does anyone of you knows how to solve this problem.

  BTW, I got the software AVG internet security on my system, but have added folder toshiba for exclude of realtime scanning just in case if its causing problems but not luck. I searched qurantine folder and its nothing in there.

  Please help me get my work button soft touch.

  Thank you.
  Kind regards
  Jay

  Post edited by: Jay Padia

  Hello Jay

  I agree with Akuma. All you can do is remove VAP preinstalled system and reinstall the latest version. Why you didn t follow the instructions to restart the computer after the installation of VAP?

  I installed VAP several times on my Satellite P200 and Satellite A300 without any problem, but after installing the latest version, I rebooted phone immediately. The procedure of the facilities has been completed and necessary processes started in the background. I guess that's the problem on your Satellite P300.

  If nothing is done the last step is to install the OS by using the DVD facilities. After doing this you will own preinstalled OS and everything works well again.

• Internet and the sound does not work after the ATU Vista 64-bit

  I really didn't want to display in the hope I would find the answer using Google, as I did in the past, but this one i can not find the answer for.   2 days ago I d/l a program called Advanced System Care. I was told by 3 of my friends it works well to clean your junk files, Defragging ect ect.

  After d/l and the operation of the program, I had to leave and shut down the system. Today I start everything is fine, and then I noticed that I have a red X on my speakers. This is not the red X you get when cut there a smaller lower-right next to the speaker in the toolbar. When I mouse over it, it says "Service Audio work not" when I click it to repair, so good it shows all is working (volume mixer control is non-interactive) then I go to control panel and click on the speaker and I get "this computer cannot play audio because the windows audio service is not enabled.»   You want to enable "I click Yes and it brings back me just in the region, that I was when I clicked on the small speaker in the toolbar with the red x.»  Everything always looks the same as it was when I put in place.

  Is there anything else I can look?

  Second problem happened at the same time.  I have the same red x on my 2 computer screen in the toolbar on the bottom right. When I try to repair it it says this "this service cannot be started because it is disabled or because it has no enabled devices associated ' when I go to Device Manager and check to see if it is still showing my d-link wireless there is black! on a yellow background. When I try to access the computer to find local internet connections, it says that it can't find. I know that my Linksys is working because my Iphone is connected.  I already tried to install a cord between my router and my system and it still does not notice the internet even when you try to reconfigure.

  I read where I can make a dirty windows vista installation and fix it. but I really hope that there is a better way.  I also tried to restore my computer to last week when I made a back up and it seems after the use of this program, that he got rid of that as well. So now im out with to be able to roll back before I D/L this close program useless lol

  I'm using Vista ult 64 bit, that the computer is built for gaming and music. OCed Q6600 to 3.2 4gig ram 8800gt 2 in sli on a configuration card XFX mother if any other system or other questions please do not hesitate to ask.  I hope that someone has had this problem and can help me to solve it.  I don't want to reformat my HD or what I really want to pay Microsoft to talk to them on the phone

  Thanks for your help

  After 3 hours on the phone with the microsoft problem solved. Seems some how using CSA and the update of microsoft it limited my computer to start all programs at startup.

• Sound does not work on the computer and the volume icon does not appear in the system tray.

  Original title: my sound icon has disappeared from the taskbar.  The Control Panel indicates the sound is on, but I can't hear anything.  What happened and how do I get my sound back?

  Have a Toshiba laptop that always displays the lower icon audio in the right hand of the screen.  The sound icon has disappeared and I can't hear anything.  I check Contol Panel and sound, and he says it works and is turned up... but I can't hear a thing.  How can we retrieve icon of audio and how I can hear sound?

  Hello

  Thank you for your response.
  I did a "System Restore" and the icon reappeared, and the sound now works.
  I restarted the computer a couple of times, but that does not solve the problem.  Also, I went into the Panel and checked to see if the speakers were working and were lit, and they were.
  It wasn't until I did the restore of the system that the icon reappeared and the noise began to work again.
  Thank you.

• Mosue does not work after the computer starts

  OP: THE MOUSE CLICKING ON ITSELF AND THEN NOT WORK AT ALL AFTER MY COMPUTER STARTS. WHAT IS THE PROBLEM WITH MY COMPUTER?

  When I start my computer my mouse works fine for a minute or two, and then it starts clicking by himself out of control. I see the icon at the bottom of my computer screen touchpad flashes when it clicks and then after that it snaps really crazy for a few minutes, he clicks on the bottom and it wont let me click all. Its the equivalent of one person pushing the left clicker where I can't do something... someone help me please! BTW, I have a dell vostro, which is only a little more than a year that has windows vista if that helps at all.

  Hi fireflyz19,

  Thank you for your message.

  I suggest you go to the manufacturer's Web site to download the drivers.

  Here is an article that gives more detail how, see the section "manually update drivers":

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sound does not work after the installation of beats audio

  Laptop: HP DV6-7001TU

  OS: Windows 7 Home Premium (the laptop came with HomeBasic, I got a copy of used HomePremium).

  I came across this problem recently which was not there before, I bought the computer as soon as I bought almost 5 months ago, I did a format complete and installed Windows 7 Home Premium (hate the bloatware that comes + it came with HomeBasic).

  Audio worked fine uptill now, my brother got a new laptop DV6 with beats the other day, and the sound was better than what I had. So I thought it was the default sound drivers I had. I went there and am myself the audio drivers. Now, since I update the drivers, I have no sound on my speakers if I use not his for a long time, if I restart the noise comes back, but if I do not use anything his bound for awhile and then try to use it again, it disappears.

  The solution that I found (to restart the computer every time), is that if I click on the vloume icon in the taskbar and then click on the speaker icon that opens "speakers and headphones properties" and then click OK in the window that opens, the sound comes back.

  Things I've tried so far

  1. Once I have no sound, again, I tried the windows "Find and fix audio playback problems", he found nothing.
  2. I have uninstalled/cancelled codec IDT of the Manager of the devices, the drivers were responsible for default and the sound was back, once I did a Windows reboot find the IDT drivers and the problem was back.
  3. I have uninstalled/cancelled drivers IDT, uninstalled the software programs IDT add & delete, downloaded a new copy from the link above and installed again, same problem.

  Help, please! It drives me crazy, I get a lot of Skype calls during my work hours and I have to constantly to cling on my clients and that the correction of the sound and to recall them once again, this is highly inconvient.

  Software IDT uninstalled, deleted/rolledback the pilot programs, downloaded the HP Support Assistant and recommended IDT software, installed via HP Support Assistant. Everything works fine now.

• Suddenly wifi does not work after the computer restarts

  After that I restarted my netbook, it is no longer connect to any wifi public my ipod has no problem. It seems that I can connect to the router but no internet and no ip address. When I connect woman manully, it acquires the router's ip address. I can't even restore the system. When I tried to open IE, my alerts firewall running TCP/IP. Please help me.

  Hi yuanlinsh,

  · What is the number and the model of the computer?

  · What is the service pack installed?

  Follow the methods below:

  Method 1:

  Disable security software and firewall temporarily on the computer and then try to connect to the internet.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Follow the steps from the link below: Troubleshooting network connection problems:http://www.microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx

  Method 3:

  Also, try to reset the TCP/IP Protocol and check the results: how to reset the Protocol (TCP/IP) Internet:http://support.microsoft.com/kb/299357

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creative Cloud Desktop Access does not work after the computer loses power

  No crashes, no power surge in surge protector, not questions of cable or internet problems, creative cloud was installed and opened when the computer turns off while I was away from the office.  After restarting the creative cloud would not open access by computer.  I tried to uninstall and when unistall was over I had a message saying uninstall completed with errors.  I was not able to download access Office creative cloud of my creative cloud account or one of the other programs.  Only, I get a message saying that the failed download...

  you could run cc cleaner and then reinstall: http://www.adobe.com/support/contact/cscleanertool.html

• Sound does not work after the creation of DVD

  When I saw my movie in still the audio works but after that I have export to DVD, it no longer works. Any ideas?

  Thank you

  Chris

  Well, you've done most of the things I would say. This individual WAV would be high on my list.

  This leaves wondering what brand of blank media are you burning at?

  Also, as a test, you can burn the file and then play this folder with DVD playback software? How does it work?

  One last thought, your audio is connected to your set-top player, or whatever it is you are testing on. Please don't laugh, as has happened at least two other posters over the years.

  Good luck

  Hunt

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• Want to dv6 Notebook PC 7226nr: scan fingerprint hp simplepass does not work after the upgrade to windows 10

  My HP SimplePass fingerprint reader does not work after the upgrade to Windows 10.  Is there a fix for this yet?

  I thought about it.  The upgrade to Windows apparently damaged 10 HP SimplePass software.  Once I uninstalled and reloaded the program, everything started working.