Sound is silent and will not turn back on.

Similar Questions

• Pavilion g6 turned off and will not turn back on

  My g6 kept turning off unexpectedly, and now it will not even turn around.  Help, please.

  The fire being orange means that the computer is "charge" of the battery.  If it is always orange and never goes back to white then there is something wrong with the battery because it is not that it is fully charged and the continuous computer to keep it loads or not related that she stopped.  This could be a battery problem or a problem with the computer loading mechanism.  It's probably more with the battery what either.  If you can get the computer to boot with the battery and you can get the HP utility Center to open, you can have it run a test on the battery and give you information about your battery.

• I have 6 phone is dead.  Will not turn back on

  I have 6 phone is dead.  Will not turn back on

  See Troubleshooting in the paper support. If your iPhone, iPad or iPod touch won't turn on - Apple Support

• my download paused and will not start back up

  My download of cs6 trial suspended and will not start back up

  Try this instead:

  Direct download links for Adobe software

  Mylenium

• Classic classic BlackBerry frozen during the update and will not turn on or off

  So I was in a wifi zone in a fast food place, and my screen said that I had to update software and because I would be there for some time, I allowed him. He said to date started and then told me that I had to be plugged in for the update, but I didn't have my charger. I don't remember if it continued on its own or if I hit just OK but now it is frozen on the ATT screen and will not shut off/on/restart. If I press and hold the off button, it counts down as if she died but do nothing and I can't use the touch screen to cancel or restart.

  I am very frustrated because I've had problems with this phone since I got less than 2 months ago.

  In addition, he is now connected and still will not do anything else.

• Re-installed Windows Vista and now it says my product key is not valid and will not turn on.

  original title: Vista Down... Need help, please...

  HII...
  I have a problem now
  I use Windows Vista Home Basic
  Recently I formatted my pc and reinstalled it clearly...
  But my windows vista could not activated online... My product is properly pressed, but it still will not yet enabled
  I can't think of her
  Please help me someone
  THX
  Concerning

  You may be prompted to activate Windows Vista

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 931573

  Vista controls and SLMGR explained

  http://www.tech-recipes.com/Rx/2062/vista_activation_slmgr_command_options_explained/

• help - all my colors changed and will not change back!

  running cs3 on imac osx

  make business cards, RGB mode.  colors are just right.   Then my printer tells me that I must give the file in CMYK mode.  so I changed to CMYK in Image - Mode, knowing that the colors would be different.  a printed version and Ugh, he hated; much darker and duller.  so, changing back to RGB Mode. and behold, the color did NOT change back!  I opened another file - one I had not tested with, which was nothing else than RGB.  and here!  She had changed too much in the dark and dull colors!

  What in the world is happening?  Help, please

  Thank you!

  I have my own customprofile that I use and use only, the opening of the dialog of the PS it is always set to printer manages colors.

  That makes no sense at all. If "printer manages color", this profile is not used; It is all done in-house in the printer. You belong to the printer.

  What kind of profile is and where exactly do you use it?

  EDIT: To make this from scratch, what are exactly these three profiles in all files of the "bad":

  1 document profile (find out by opening the profile dialog box convert and note what it says under Source space. Cancel out; do not fill in).

  2 the monitor profile (find out by opening the color settings. Open the drop-down list under working RGB space and scroll to Monitor RGB and associated profile. (Cancel).

  3 printer profile, if any. (This is defined in the dialog printing according to the paper, as long as Photoshop manages color).

• HP 6700: HP 6700 stops and will not feed back

  Our HP 6700 closed mode and do not print.  The screen is blank.  I tried to unplug the printer and the surge protector, wait 60 seconds and pluged new directly into a wall outlet and the problem persists.

  I am all good!  It is the external power module.  He exchanged with another HP with the same module and the printer was fine.  Believe it or not, the power module that didn't work on the HP6700 has worked on other HP printers.  GO FIGURE!

• To Hardrive with other active vista laptops. Now produces (and will not) turn on.

  I moved my hard drive from my old labtop labtop my sister. My hard drive was fully active Vista, but it says when I moved the hard disk that the product key is already in use. Yet, it was my Vista. Now, I have waited for a long time and may not use Vista at all. Is there a way I can use the same key?

  The OEM of Windows Vista license cannot be activated on another computer.  OEM license is permanenty linked to the original computer with which he came. Carey Frisch

• I tried to turn on windows defender and he said that there is an error. It will not turn back. Anyone with information would be a great help. How to start the service manually?

  I discovered that Windows defender is disabled. I tried to turn it back on, and he said that there is an error. How can I turn it back on? Anyone with information would be a great help. How to start the service manually? __

  Hello
   
   
  could a. you give us the exact error that you are experiencing?
  (b) also mention the error code, as well if it is listed.
  have c. you installed other software security like McAfee, Microsoft Security Essentials etc. ?
   
  
  Let us check if the service is set to automatic.
  1. Click Start-> run and type services.msc
  2. now, locate the service named Windows Defender,
  3. double click to bring up the Properties window.
  4. set the startup type to automatic
  5. click on apply, and then click Start
  6. click OK, and then click Close window Services/Local
   
   
  We hope to hear from you soon.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A200-13 M - black screen and will not turn off

  Hello

  I just bought a * Satellite A200 13 M *. In the first market, Windows Vista seems to be properly installed and worked to internet (wifi) access. The Norton program has been updated, and I could download and install OpenOffice. However, as OpenOffice had reported a small amount of disk space available (55 GB) I tried to see the hard drive in the browser.

  I clicked on Control Panel and waited to open. At this point, the arrow of the mouse has frozen. After awhile, I tried Ctrl, Alt, Del, and the system asked if I wanted to stop. I did, and a new screen has announced that Windows is being closed. This screen froze then in turn. I waited for a while and then tried to turn it off with the switch. The screen went black.

  However, the blue light comes on, the fan is still running, but I nothing seems to wake up the machine. I called the service of maintenance of the shop, I bought from (Darty), but they are overloaded and said they'd call me in a couple days (!). Is there anything I can do in the meantime that would allow me to continue to work with the machine.

  Thank you

  Tim Mason

  Strange sounds! But it's a computer and sometimes, these machines don't {color: #ff0000} {color} strange things ;)

  Anyway... try to remove the battery from the laptop and unplug the power adapter.
  Wait about 20-30 min and connect everything again.

  Then try turning on the laptop computer. If it is not a serious problem, the laptop must again!

• My daughter IPhone 6s collected not from one day to the next.  Tried the portable charger all day.  Now turned off and will not turn on.  It does not get wet or damaged.

  My daughter has a 6 iPhone 4 months old.  She did not the last update.  Last night connected to load, it did not.  I thought that the cable may be defective.  Portable charger I tried today to school, did not work.  Just had it plugged into the wall for about 2 hours, now completely off and we can't get it back on.  That he suffered no water or other damage.

  First try to clean the port of lightning on the bottom of the phone. Use a bright light and a non-metal probe, like a wooden toothpick or plastic. Check the USB adapter and cable; Try one another adapter and a different cable.

  Then take it to an Apple store. It is covered by warrantly

• XP Reinstall or repair the installation, all the keys show as zero and will not turn on!

  I do installs repair and re - installs several PCs in the last days, and none of the license keys are coming as valid, though even I am sure they are (the PC came directly from Dell).

  Now, I have one, I did a repair install, though I have the correct cd (oem, oem cd installation), the key showed as not valid for repair so I used the public keys of http://technet.microsoft.com/en-us/library/bb457096.aspx to complete the installation.

  Now, however, I can not connect to Windows. It won't let me open a session as long as I go through the product activation and activation says that my (valid) key is not valid! I would use the key update tool, but cannot connect to use it!

  It said that the key which is on my COA which has been on the Dell PC is not valid? It's a bit infuriating. The first couple I gave up and used nine keys of unopened copied of XP that I have, but I'm out of those now and in any case the old keys must be still valid! Unless MS is turn off old keys to sell more. Seems pretty shady to me.

  More information is needed, such as:

  1. is the Dell keys to products for Windows XP Home Edition or Windows XP Professional?

  2 is the OEM Windows XP CD, you are using a Windows XP Home Edition or a version of Windows Professional?

  3. what level of Service Pack is installed on the CD that you are using? 1, 2 or 3?

  4. have you tried to use the Windows product key update tool ?

  5. have you ever tried to activate by phone: How to activate Windows XP by phone

  Carey Frisch

• my desktop pic is not displayed on the entire screen. It has been moved and will not be back. __

  My office does not appear my picture on the entire screen. I tried to move it through its expansion, but it doesn't let me do.

  Right-click in the middle of your desktop

  A menu will appear > click Properties
  A window opens
  Select the Desktop tab
  This should give you options on how you want the photo positioned, tiles, centered and stretched.
  You want to stretch the image so that it covers the entire screen.

  Serving the community one computer at a time

• Help! My lines changed apparently no reason apparent and will not change back!

  So, I mind my business when all of a sudden, BAM! All my lines changed faster than a shrinky dink. I tried turning it off and then on again, I tried checking to see if the thing "Snap to Pixel Grid" had something to do for her, I even tried prayer. Nothing has worked so far. That's what I'm working with now, as you can see I have more fine Dick of the Ant lines, even if they must all be from 7pt 3 pt. Even the symbols of "the eye" to view the layers are missing from their students, which I find a bit disconcerting, but I figure is probably also a symptom of the issue as well.

  so... Help? Please?

  

  you are using the traced

  Display > GPU preview

  to return to "normal".