Sound of HP laptop Pavilion dv6 does not work after installing SP2

Similar Questions

• Satellite 2400 - 103: sound does not work after installing SP2

  Hello!
  I had to install Windows XP Service Pack 2 to keep my Windows Update. Unfortunately, my audio device does no more work because XP is considered a potential threat.
  When first, I installed SP2 last year and saw that I had no sound on my PC, I just uninstalled it because I didn't know what to do for my sound card.
  Now that I have to install it, I must do something for this sound card (as a music lover, I am not not to be able to listen to it).

  Could you please tell me if Toshiba has created a code for this problem? The devices dialog box tell a Code 48. I'll contact Yamaha?
  Thanks a lot ofr your answers.
  Good bye
  Catherine

  Hello

  Have you checked the page of the Toshiba driver to update the audio driver?
  If this isn't the case, then do it!
  I visited this site and find a sound driver of Yamaha. The update is on 14/01/05 and all other drivers are since 2002. So I guess that the audio driver has been updated on the page.

  So download the driver and install it on your laptop!

  Good luck

• I have my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it might

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at * address email is removed from the privacy *.

  Thank you very much. I hope hear from you soon. Thank you once again :)

  Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

  could you please email me at e-mail removed for privacy

  Thank you very much. I hope hear from you soon. Thank you once again :)

  You have a laptop. So try the right button on your touchpad. It work?
  If so, the only remaining possibilities are:
  1. bad mouse. Get a new one.
  2. defective UBS port. Plug the mouse into a different port. See if the right click of the mouse works this time.

  P.S. We do give advice to users via e-mail. All responses must be published and remained in this forum so that others with the same problem will use the answer.
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Safari does not work after installing macOS Sierra

  Safari and apple store does not work after installing macOS Sierra

  Alas, my crystal ball is in the shop for cleaning, so you will need to provide more details on what "doesn't work" and above all error messages. First of all, let's start the App Store. Provide as much information as possible for those of us who do not sit on your shoulder.

• My safari does not work after installing iOS 9.3

  My safari does not work after installing iOS 9.3

  This is a known issues with 9.3 and Safari (with the mail application and other applications)

  Some have reported success goes in the settings, safari, advanced and Disabling Javascript. Others said that Opera browser works, so you can use it as a workaround until a patch is issued. There is no indication how long can take this difficulty. Maybe in a few hours, could be days.

  or you just have to wait it out.

• 11-n001tu x 360 PC Pavilion: 11-n001tu x 360 HP Pavilion touchscreen does not work after updating drivers

  Touch screen of my laptop does not work after update my drivers to date. I opened Tablet PC setting, he said: "there is no pen or touch input available for this view. (I used the shortcut to open the parameter because the Tablet PC set disappeared into the control panel as well as the features of the touch screen). I tried to make a recovery, but it has failed to bring to the touch.

  In addition, the HID-Compliant touch screen driver is missing.

  Please help me solve this problem, thank you.

  Hi there @BryanHech,

  Thank you for joining the Forums HP's Support and welcome! It is a great place to ask questions, find solutions and get help from others in the community! I read your post on the Forums of HP Support. I wanted to join you and help! I understand that your touch screen has stopped working after update the drivers on your laptop PC HP Pavilion 11 - n001tu x 360 .

  How you did update the drivers?

  You use Windows Update?

  Have you checked to see if the driver has been disabled?

  Have you tried to run the Troubleshooter in Windows?

  Have you tried to do a hard reset?

  Have you tried a update the BIOS and graphics driver?

  Have you tried to perform a screen touch diagnosis the HP Hardware Diagnostic tests?

  Have you tried to Configure the display key?

  Have you tried to activate the driver in touch screen device manager?

  Please follow these steps to see if you can activate the touch screen:

  • Open the Device Manager
  • Find "Human Interface Devices"
  • Expand "Human Interface Devices"
  • Right-click on "touch screen HD compliant."
  • Click 'Activate' (if available)
  • Restart your laptop.

  If losing your touch screen happened after you had made a set of Windows updates, use the system restore feature and choose a date that was before the problems began.

  To use the system restore in Windows:

  • Go to the Search
  • Type of Control Panel
  • Click on Control Panel
  • Click System
  • Click on the System Protection
  • Click the System Protection tab
  • Click on System Restore
  • Click Next
  • Choose a restore point
  • Click Next
  • A box that says "once started, the system restore cannot be interrupted. Do you want to continue? ' displays
  • Click Yes to confirm

  When the system restore is complete, you'll be up a pop that says that it has been completed.

  Please let me know if I answered your question by clicking the "Thumbs up" if the troubleshooting in this post steps solves the problem for you please click on the button "Accept as Solution" . This will allow to the others is that present the same problem a solution also. If you need assistance, I would be more than happy to continue to help you. Please just re-post with the results of the resolution of the problems.

  Thank you!

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• Dual-Boot Pavilion dv6 does not work

  Hello

  I bought a Pavilion dv6 with Windows 7 pre-installed. Now I want to dual-boot with Linux (Fedora).

  (1) this laptop has a 500 GB hard drive. So, using diskmgmt.msc, I shrunk the size of the primary partition by about 100 GB. Now, I have that much free space.

  (2) figured out the magic handshake to get the BIOS to run (the F10 hold to power up).

  (3) connected the DVD of the Fedora Installer. He settled in saying that there is not enough space. Tried several options for installation in 'free space' and 'replace existing Linux installation. Same question. Note that I have not yet tried Ubuntu.

  (4) booted back to Windows 7, looked again diskmgmt.msc. I noticed that I have the following partitions. 'System', which is 200 MB (NTFS), player C which is now 351 GB (NTFS), D drive Recovery 13 GB (NTFS), HP tools 103 MB (FAT32). Here are the possible question, all these partitions are listed as "primary". I read somewhere that there may be only 4 primary partitions (it can be extended partitions).

  My questions are:

  (1) is the fact that all primary readers are allocated to preventing me to install a secondary operating system (in this case Linux)?

  (2) if so, what are the disadvantages of the removal of the partition of HP tools (except perhaps less boring tools automatically runs all the time - with no apparent way to stop).

  Thanks for your interest.

  I've heard nothing back for 20 days, which raises the question to know if HP support people even read this, much less provide support on this forum. In any case, I managed to run dual-boot on mine. I hope this helps someone out there doing similar things. Here are the steps that I had to do (and some I do not have):

  1. Created the HP recovery discs... Well I tried to anyway. This process is configured to do one time only. Unfortunately burning failed on the first (I put by mistake a double layer DVD-R in the drive, but the drive itself is supported) and burning failed, but the process seems to still consider that he "get". Bottom line, if I ever corrupted hard drive, I'm out of luck (unless a HP support person has other suggestions).
  2. Bought a 1 TB external drive which has an ESATA interface with intention to save the different partitions of Windows.
  3. I bought Nero 9, which is supposed to make backups. However, he seems to have a bug where it said that I could not make a backup disk of an account that does not have administrator rights. The account I was using has Admin rights, so I guess that the program cannot handle permissions Windows 7 style yet.
  4. Defragmented the big drive (351 GB) C.
  5. Using diskmgmt.msc, used the "shrink" option to reduce its size to 351 GB GB 251, who did not assigned 100 GB on the disk.
  6. Using diskmgmt.msc, assigned a drive letter to the partition of HP tools (see the list of partitions in the previous post).
  7. Using Windows Explorer, tools HP Score Watch now upward because he received a drive letter (it was not visible before). I copied the contents of HP tools in a folder on the C drive, just in case I needed to get it back. It's only a few MBs.
  8. Once again using diskmgmt.msc, deleted the partition of HP tools. This frees up a single primary partition on the disk.
  9. Rebooted the laptop from the Fedora 12 installation disc. Now grub / gparted is happy because he is free to use partition.
  10. Chose to install grub on the MBR, definition of Win 7 as the default bootloader on the player option.
  11. Completed the full installation of Fedora.

• Computer laptop Pavilion dv6 will not work

  Hello, I have a computer laptop Pavilion dv6 with product number QE023UA #ABA. It works under windows 7.

  So I was just playing and my laptop turns off suddenly as if he had run out of battery life. But he is in CHARGE. I didn't know what happened, so I just pressed the power button and nothing happened. I pressed it again but longer, still nothing.
  (btw, I use an extension) I thought something was wrong with the plug, but nothing was wrong. I heard a strange noise coming from the ac cable. That is what happened: Advanced... Tip... Tip... Tip... Tip... and so on. I tried to remove the battery and put it back in, but that does not solve anything. None of the lights are on. I don't know what to do more and I am looking for help.

  Sorry if my English is bad.

  The problem is solved, but thank you for responding.

• Sound does not work after installing new wireless keyboard and mouse

  I have windows xp Media Center installed the new logitech wireless keyboard and mouse, and now my sound does not work. The speaker light is on, the Device Manager does not show a conflict and said that everything works well, but still no sound. A friend has just installed a new microsoft wireless keyboard and mouse and is having the same problem so I know that's not new equipment. Does anyone else have this problem?

  Hi Red_t,

  Welcome to Microsoft Vista answers Forum!

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to XP Media Center and would be better suited to the Windows XP community. Please visit the link below to find a community that will provide the support you want.

  Windows XP Media Center edition Discussions - http://www.microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?dg=microsoft.public.windows.mediacenter&lang=en&cr=US

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 350 laptop G1: Touchpad does not work after open the cover.

  Whenever I close the lid, when I open again the touchpad does not work.

  I have to restart or put the computer to sleep in order until the beginning of touchpad working again.

  I solved my problem!

  I have unistaled the driver PS/2 Synapatics 19.0.12.95

  Thouch pad suite to work without the driver and now I finally can close the lid and open it again and use the touch pad immediately.

• WIFI does not work after installing WIN7 to HP Pavilion DV1000

  I hope you can help! After the complete collapse of the old WinXp I installed Win7 - mostly away from the ti works. However, WIFI does not work. (P/N is PY869PA #ABG, he also says dv1303ap on the label)

  Is there a driver for the available WLAN? Witout WLAn or internet access good old HP is pretty useless...

  Hi, Andreas:

  Here's what you need to do to get this old Intel Pro 2200 card to work with W7...

  Download the zip version of the driver from the link below.  The first file listed.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=15798&lang=eng&OSVersion=Windows%20Vista%2032 * & DownloadType =

  Unzip it into a folder.

  Go to Device Manager and click on the network controller needing drivers.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

• Satellite 3000-400-Accupoint does not work after installing Windows XP

  Hello

  I installed Windows XP (SP3) on my Satellite 3000-400, but the Accupoint II trackball does not work. It is not mentioned in the hardware Manager and I can't find a driver.

  Sorry for my bad English.

  Hello

  Do you mean that you can not use the touchpad buttons too?
  Hmm, sounds a little like hardware delivers what do you think?

  Have you tried to install a driver for touchpad?
  I didn't find the driver for the touchpad for Satellite 3000-400, but I found a satellite 3000-504 (the drivers are placed in the Archive)

  Try to install this driver and check if it helps.

• Headphone Jack does not work after installing the audio driver on Equium A200

  Can anyone help? I downloaded a page update Toshiba sound card driver and now my headset does not work.
  The sound plays just of computer speakers.

  Please someone give answers.

  See you soon

  Hello Rocko

  I don't know how to answer them. Maybe you should explain your problem a bit better. For example:
  What operating system you are using? Why you installed the sound driver? Is the reason why your own installation of OS or you have had a few problems of her before?

  Sorry, but I just want to understand what is happening with your computer satellite phone?

• Satellite U300 - 15 p CD/DVD does not work after installing Win 7 64 bit

  Hello guys...

  I have a portable Satellite U300 - 15 p with 4 GB of memory.
  I installed Windows 7 64 bit one mouth a go and after that, the DVD player does not work!
  Someone knows this problem?

  TKS

  This is the error

  SOFTWARE FOR DEVICE DRIVER HAS NOT BEEN INSTALLED SUCCESSFULLY
  * PLEASE CONSULT THE MANUFACTURER OF YOUR DEVICE TO HELP GET THIS DEVICE INSTALLED *.
  HM-ETmSE DGDGAM GSE - E1eNe ATA DEVICE * X * a failed

  Hello

  You must remove the upper and lower registry key filters.
  First remove the CD/DVD drive device manager.

  Then go to the registry and remove the filter top and bottom of this key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  After this reboot of the laptop.

  For more information, check this:
  http://support.Microsoft.com/kb/270008/en-us