Sound on Satellite Pro 4600 does not work
I downloaded the latest driver on this site.
But if I want to install it, I get an error. The INF is missing.
With Suse Linux, the sound worked. With 2000 is not Windows.
Can someone help me?
the Inf´s are missing? Maybe archive has not been correctly downloaded.
So, maybe you can give a try on the Canadian tosh site, they have almost all the drivers you can't find on this site:
Please give a feedback, would be appreciated. :)
The product key on my Satellite Pro P300 does not work.
I entered the key from the sticker on the back of the computer. What I am doing wrong?
Why use this product key?
Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.
Second, it's an OEM key and it will not work with other versions of Vista!
need your help...
I have the Satellite Pro U300 series and most recently the numbers four and six obtained busted... its does not work so I try to use the superposition of numeric keypad but I have observed that after pressing FN + F11 nothing happens...
Please help me...
When you use FN + F11 small control LED must be lit and the keypad must be enabled.
If your laptop is preinstalled with Toshiba recovery image this option SHOULD work correctly.
So nobody here knows what you did with your laptop and why these options are not available more.
Before you start with advice how to get this working again once please let us know what operating system is preinstalled on your Satellite Pro U400.
I have toshiba satellite pro m40x laptop. It haves apromaly 11 months.
In recent weeks, the laptop does not work with the battery.
With the battery and the power running, if I turn on the laptop, it turns off after 10 seconds. If I only turn the computer batteries, laptop not respons.
The laptop works without battery.
I have rma is not the portable and the technical suport fixed the battery because it only 6 months guarantee.
I'm sure that battery modules were not upset because I used the battery not very often.
I disassemble and I wached the control circuit. I'm sure that something of them, it was broken, but I can't fix it without the schema.
Another question is if I can change the graphics card to laptop. Is actually a x600se but I need power more graphic
I hope you can help me
It is not easy to say what the problem is here. Have you noticed something strange with LED power control? It is also possible that the electronic power supply do troubled. Try to talk with authorized Toshiba and explain the situation. If you open only one Notepad, uneducated, it may be simply worse.
Graphics card cannot be updated as on desktop computers. I put t know how it is on this model laptop but the graphics card is fixed on the motherboard and cannot be traded.
My satellite pro c850 cd does not work after updating the bios of toshiba.
What should I do?
Saying: don t work do you mean it does not fuel upward or what do you mean exactly?
Flash the BIOS correctly?
Maybe something went wrong during the upgrade, which means that l ROM flashed module isn't properly
In most cases a special disc of crisis of the BIOS would be required to operate
Not sure if you can get it repaired by your own
Check this thread. Maybe this helps:
Otherwise you need help of the authorized service provider available in your country.
Okay, the computer is a Toshiba Satellite Pro L100 PSLA4. Problem occurred during an update of the BIOS on the official website of Toshiba. I downloaded the zip file, it extracts and activated the .exe file at the Interior.
The window opened by the .exe is a program flashing BIOS, the .exe wrote at the same time a new BIOS file to a temporary folder.
When he tried to use the program I got was an error saying it couldn't find the new BIOS to the entrance.
I tried again only to get the same error. Then I left the laptop for several minutes and when I got home, I found a laptop no longer Virgin.
On which I hear by an obvious lack of BIOS functions i.e. power LED does not change when the connection to disconnect it from the power outlet and the fact that I had to take out the battery to turn off the machine. When the power is turned on now it is check readers and restarts (no display, no beeps)
What should I do?
The first thing that comes to mind was to reset the BIOS.
A problem, I can not find the RTC battery or a rider switch.
I can't tell why it happened, but I can tell what happened.
In my opinion, something went wrong during the process of updating the BIOS and the ROM modules was not writer properly.
Simply says the BIOS update procedure has failed.
In this case, you will need to contact the ASP in your country for a fix
The technician must be able to rewrite the ROM module and updated the BIOS again.
Good luck buddy
See you soon
Recently, I load Windows 7 (64-bit) on my Satellite Pro P300. I downloaded all the drivers for W7 64 bit and installed everything, fortunately, most of the time.
The touchpad, however, is not completely functional. The upgrade page says to use the Vista drivers and did not provide any drivers for win7. Installing the Vista drivers didn't really go so well.
In any case, the essential element of the missing features is this thing where you drag your finger up and down the right edge of the touchpad, and it scrolls for you. I can click and double click and move the slider. But I can't scroll. And it's such a pain with move the slider above the scroll bar of the application, with a big screen.
Any help would be appreciated.
See you soon
If I understand you right you are missing these additional mouse settings. Am I right about that?
Which driver you have installed?
Perhaps Synaptics driver?
The machine (not mine) went suddenly "dead" outside of the led lighting, even if she had been normally before it was turned off.
When it was given to see what we could do, I fear a failure to the mobo, but when we lifted up at an angle and press the power button upward, it began. Everything was as it should be - until we turned it off, then same thing happened, and again, it has started, then while I was holding it at an angle.
We thought at the beginning it was a faulty switch that could be replaced, but now we believe it is more likely to be something that is broken and is intermittent contact when it is in the right position.
If anyone else has had a similar problem and can tell us a little more about what we are against, please?
It's not easy to say why this problem occurs. Of course, this looks like a hardware failure, but I can't give t you a good answer exactly what s wrong.
Well, I think that the best way is to contact the after-sales Service of Toshiba partner. He can start the diagnostic test to analyze the malfunction.
Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.
In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
What should I do to get a normal departure procedure?
When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.
When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
The same thing happen on my Satellite A300.
the built-in on my Satellite T130 webcam does not work.
I use Windows 7 Home Premium and already reinstalled the drivers of webcam 64-bit through this Web site. However, when I click on the webcam application, simply, nothing happens - program doesn't open at all or turn off instantly. Skype is not also acknowledge a cam. In addition, there is no webcam in Device Manager (a not detected USB device however) and no symbol of cam in the Ribbon of Toshiba quicklaunch, which is like the camera is started according to the "manual".
Someone has an idea what is the problem? Looks like a common problem according to Google, but no suggestions other than to reinstall the drivers. Perhaps another application blocking the camera? Firewall settings?
I'd appreciate any help, thank you.
Best regards Florian
> a USB not detected if
Maybe it's the webcam from the webcam is connected to the internal USB controller on the motherboard.
It looks like a webcam driver is not installed correctly.
Try the webcam driver released for the satellite t230 or other series of satellites.
Versions are newer
Also recommend that you check the BIOS settings.
In some cases, the BIOS contains a webcam option where the webcam can be turned on and off.
Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.
On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
After doing this connect the power running and try to start again.
What happens when you do this?
Satellite A350 Touchpad does not work ok (unstable system and left button not loaded).
I tried to make the driver but nothing. No problem drivers (conf system). I have the driver for the touchpad stroped and with an external mouse everything is working properly.
What should I do? Don't you think it's hard or soft the problem. * The touchpad is NEVER worked.*
Thank you, and sorry for my bad English. :-(
The touchpad does appear in Device Manager or you have here yellow exclamation points?
Like Akuma says you can enable or disable the touchpad with FN + F9 key combination.
Did you check that?
In the worst cases, you must go to an ASP. It seems to be a hardware malfunction, and this must be checked by a technician of the laptop. Here, you can search the nearest ASP:
http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider
The function in my Toshiba Satellite C660 key does not work except volume.
This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(
Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.
Remove the preinstalled version, restart your computer and install the latest version.
After doing this it works again.
Hi, my Satellite L300D - 12L does not work.
I was on windows and it came with a blue screen with white writing on it. I didn't see what he said.
It turned off my laptop. Then it restarted. He got to the screen saying: start the system restart and start windows normally.
I did the repair of launch option. He said windows loads the files then pulls up to the Microsoft loading bar then the screen turns white for centuries, just with the arrow cursor. I tried to leave two repair a normal but get the same.
What can I do? Any ideas?
Looks like Windows is damaged. I would run Recovery by pressing zero during power on. Backup your data first, because the rags for HARD drive recovery.
Also check the RAM. www.memtest.org is a bootable CD or a FD
My Sony Vegas Pro 9 does not work with MP4 files or all the Quicktime files. I know this doesn't have much to do with Windows XP but I just thought I would ask, if you need any information I would be happy to give you.
Take a look at what it fixed my problem with Vegas platinum 9.0.
This is a link to the FAQ from Sony
Maybe you are looking for
I have a Macbook Air OS X version 10.7.5 I'm frustrated by continuing to try to upgrade my Safari 6.1.6 browser to the latest version 9.1.2. I get the message that my browser is up-to-date! Yet when I go to the site of the encyclopedia of Oxford it t
This question is so incredibly basic that no one has asked before. But as naïve as it may be, I just want to be sure, because if the old version is not uninstalled, I don't know how to make that happen. Thank you. Eric
Currently, I have installed Windows 7. Now, I try to install my printer back. It is a HP Photosmart C4345 all-in-One. I use a Hp Photosmart C4340 series CD to install it on my computer (last version was Windows XP) it tells me that I can't install it
When closing down my pc, I would have three options; Standby Disable Restart However the sleep option is removed, which leaves me; Turn off or restart. How to restore my mode sleep? Having to turn off the system and reboot later it is a kind of long-
I replaced a wireless adapter G from Linksys with a Wireless-N N600 USB adapter on my desktop PC. The new N600 adapter installs OK, the computer can see the EA3500 network router, but the two cannot connect. What's wrong? What should I do? Help! I ne