sound options displays "disconnected."

The sound is not my HDMI cable to my Sony TV. It shows that it is disconnected.  It worked fine before, but after that I updated the drivers for my ASUS hd 7770 (2 GB) it has stopped working.  In fact, it works when I restart the computer.  I can "extend" monitors and have no problem, the visualization and the pleading on my Sony TV, but as soon as I put the monitors back to normal it loses the collection with tv in regard to sound only...  I am able to send video to the TV immediately after but the sound won't Cross and playback devices shows that the appliance is disconnected.

I also tried different things such as setting the HDMI etc. but default setting does not remain like that and the problem comes back.  I tried to roll back previous drivers and that has worked very well, but caused other issues with games etc...

Don't know how to solve this; ASUS did not support.

Thank you

Yes to make it work if I set my pc to never turn off the monitor and never Hibernate.

I guess I'll leave it like this for now.

Thank you guys.

Tags: Windows

Similar Questions

  • The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

    The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

    Hello

    Control Panel - SOUNDS - Audio peripheral devices configuration-manager

    Make sure you write down the description and model double click top - tab drivers - write version. Now
    Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
    CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

    If your driver shows 06 you have the default windows and part of the question.

    Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
    Put them - right click on Reboot - RUN AS ADMIN -.

    Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
    the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
    Just make sure that the version you have installed appears in the tab of the driver.

    Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    ---------------------------------------------------------

    After the updated driver.

    Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
    and show disabled devices - check your micro - highlight them, then lower right properties. Do
    of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
    and APPLY / OK changes.

    Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
    is the RealTek Audio Manager, yours can be quite different name if you have one.

    How to activate Audio devices hidden in Vista
    http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

    Connect one microphone, music player or other audio device to your computer
    http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

    Problems with sound and audio or no sound - a Mr Fixit
    http://support.Microsoft.com/GP/NO_SOUND

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Satellite A500: problem with the driver of sound and display after update!

    A500 Windows 7-64 bit

    I download the latest driver (6.0.1.6048) sound and display driver (8.16.11.8973) and I have a few problems.
    The colors are too bright and the sound is too deep (as the middle are too low).

    Hello

    Then why you n t go back to earlier versions of the driver?
    In your case, I would recommend setting the operating system at the point of time at first, until you have updated the drivers.
    Usually, this should help to recover the old drivers again.

    Welcome them

  • I have a NVidia GTS450 with HDMI output. When I connected it I had sound & vision. After the first time that I turned off the desktop computer sound options just told me THAT HDMI is not connected?

    I am running Vista Home Premium 32 bit. It does not seem to recognize the connection although it is really connected and one / v amp is running. I get the desktop on the HD TV but no sound.

    Hello

    By default the Vista transmits no sound on HDMI output.  To change this to change the settings in the control panel.

    Note: This will turn off sound from speakers or normal audio output on the laptop.  To get that back, you will need to reverse this process.

    a. click on the button 'start '.

    b. click on 'control panel '.
    c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.
    d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.
    e. This will bring up a window titled "Sound".
    f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.
    g. There should now be a checkmark on this option.
    h. the sound should play through your HDMI connections to the TV.

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  • When I open/close the cover I hear the sound of connected/disconnected from the device. How can I turn this off?

    Since I let my son use my laptop for a test, when I opened the lid I hear the sound "Device connected" and the sound "Device disconnected" when I close. He has no idea how it happened, and I can't find how to make it stop... Very minor, of course, but anyone know how to disable this option?

    Thank you!

    David

    Hi David,

    1. How can you be sure sound like "Device connected" or "Disconnected" sound?
    2. What is the number of brand and model of your laptop?
    3 are. what device you referring?

    I suggest that you perform the System Restore point that your laptop was working as intended.

    You might also be interested in this article.

    Change what happens when you close your laptop

  • sound via display of an elite 8200 port does not

    Hello, we have an elite sff 8200 with WIN 7 x 64 but we are not able to get sound display port. How can we solve this? We have only one option in the sound Setup. We get the image on the display port, but not his... According to this post (LINK) , it should work!

    No, HP could not solve the problem. We bought a graphics card small footprint for the PC with a HDMI Port built in, that solved the problem of noise...

  • in case of power save/hibernation - theater sound system "device disconnected" repeatedly

    When my desktop PC goes into hibernation system sound for 'disconnect device' begins to play repeatedly.

    So I changed the setting of the sound to 'none '. Now, he's playing the system "connected audio device" several times.

    At first, I thought it had something to do with the addition of a second monitor.

    Then I disabled the 2nd monitor power when the use not. Is still healthy.

    So, I disconnected the VGA cable for 2nd monitor. Even the sound repeatedly.

    I could probably just change 'None' system for device disconnected but I want to fix the problem, not hide it.

    Hi David,

    Thank you for the update on the issue.

    If the problem persists, I you suggest to update the display drivers and then check the status of your question. You can see the steps in the article mentioned below to update the drivers.

    Drivers are updated occasionally. Windows can update automatically, or you can install the drivers updated yourself. It is important for you to have confidence in the updated drivers that you install. Windows warns you if it detects a suspicious or dangerous driver, you should not install.

    Download and install the drivers

    If steps above could not help try updating the drivers from the manufacturer's website. If you do not find drivers please give me the brand and model of your computer and we will try to find the proper drivers.

    Keep us updated on the status of your issue and we will be happy to help you.

    Kind regards

  • No options display remote content message after update to Thunderbird version 31.0

    Version of Thunderbird 31.0 updated via his usual auto update and now I can't see the remote content of new messages.

    Through online searches I found references to the fact that the button "Display remote content" is now replaced by a new notification with a Preferences button bar to display remote content.

    I have no problem with this change with the exception that I don't get this new bar notification and button, or the old, so I'm not able to get a message to load his remote content unless I have enable the privacy setting General to allow remote content that is far from what I want.

    I also checked the setting of permissions.default.image through the configuration editor and it is set to 1.

    I also found some search hits suggesting restart Thunderbird if this new notification bar is missing. I have restarted TB several times and even to download the Installer file for the version 31.0 and re-installed in this way and have also to restart my machine option remote message several times, but still not content.

    Help, please.

    If you have restarted with disabled modules? Help menu > restart with disabled modules.

    V31 has significant changes in the UI and it could well cause problems in modules and themes that stable for years.

  • Satellite L300D PSLC0C - need to sound and display driver for Win XP

    Hello everyone

    I have toshiba Satellite L300D PSLC0C.
    I recently installed Windows Xp on it and now I'm not able to get the display driver and audio drivers.
    I tried after the display drivers and sound respectively, but they both failed to install
    [Display driver | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 784 & selSho rtMod = null & language = 13 & selOS = 10 & selType = 11 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 4 & is lectedLanguage = 13 & type = 11 & page = 1 & ID = 63947 & DISO = 10 & driverLanguage = 42]
    [Driver sound | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 784 & selSho rtMod = null & language = 13 & selOS = 10 & selType = 42 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 4 & is lectedLanguage = 13 & type = 42 & page = 1 & ID = 63958 & DISO = 10 & driverLanguage = 42]
    Also I get an exclamation with PCI device and Bus SMB controller in Device Manager. I tried following Chipset utility, but it did not work.
    [Chip Set Utility | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 784 & selSho rtMod = null & language = 13 & selOS = 10 & selType = 94 & ADOs = yearupl & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 4 & is lectedLanguage = 13 & type = 94 & page = 1 & ID = 63940 & DISO = 10 & driverLanguage = 42]
    I'm really looking forward to any help on this

    Hello

    Because the laptop uses the ATI graphics card, you will need to install the driver of ATI graphics card. I think that you need the driver for the ATI Radeon X 1200 control some pages like omegadrivers.net and similar
    The chipset driver is an ATI due to AMD CPU driver.

    Audio driver seems to be Realtek.
    I recommend that you visit the page of Realtek and download the driver of the page.

  • I can't control the sleep display option - display decreasing intensity 5 minutes despite Power Options

    I have a HP Pavilion dv7, running Win 7 Professional SP1 x 64. It was purchased in 2010.

    The display dims (goes to dark blue, not black, the desktop is not visible) after 5 minutes of inactivity.

    The cover of the computer is open, pc is connected, nothing else is running.

    I have power Options (Control Panel--> equipment) and its--> power for trendy Options value

    HP recommended and I have edited the plan to these settings:

    • The brightness... 20 minutes
    • Turn off the display... 45 minutes
    • Put the computer to sleep... 1 hour

    I put these time abnormally high just to see if the system will follow this plan, and it's not.

    Which bothers me more that gradation display after 5 minutes.

    Are there other system options that replace power options?

    Please point me in the right direction.

    Thanks in advance for your time and help.

    Your blue gradation display can show it's a flavor of screen running.

    Check it out and set it to none.

  • No sound on Display port

    I have connected my T500 to a LCD TV using the display port adapter and HDMI to HDMI cable. Picture is fine, but his fate from the top of the tower only. How can I get sound through the TV please?

    Roy

    The current view port does not sound, video only. It is a hardware limitation.

  • How to adjust the power of the low-battery warning sounds options?

    Original title: WHEN the RECHARGE PORTABLE IT beeps AND I can't do it; HOW can ME to the MUSIC, I turn OFF THE BEEP?

    OK SO WHEN MY DOUGH IS LOW, I THE BRANCH AND IT SOUNDS REALLY LOUD, I LISTEN TO MUSIC OR WATCH VIDEOS SOUND RS FORT BC AND A BIT BORING! HELP PLZ

    Hello

    Here are several methods.

    Double click on the speaker near right lower clock - mix - MUTE Windows sounds or lower the slider
    all the way.

    Control Panel - Power Options - click on change Plan settings for the offender to power you use and want
    Change - change Advanced Power Options - battery - defined as you wish.

    Control Panel - sounds - warning of low battery - you can set that None
    Also check the critical battery alarm

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Application is not displayed in the builtin display disconnect after secondary display

    I've linked my PC with a secondary screen with a station in the office. I took my PC from the docking station. Now, when I try to open a say for example VPN software, the page is open but I don't see the page on my integrated display. I tried Windows + P option, it does not work. How viiew the page in my view integrated?

    I found the solution...

    1 Windows + P => select extended.

    2. Select the window that does not appear in the display of builtin.

    3. press Windows + shift + right arrow or left arrow depends on the management of the secondary display.

  • BlackBerry browser google smartphones in ' go to ' option displays blank page loading.

    Hello, I am a newbie in the world of blackberry. I just got my friends, the Bold 9700 for my engagement present. I use it for a form of the week. I am Malaysian and I use the DiGi carrier. At first, everything goes smoothly, web browsing is excellent. I downloaded a few great application mainly form mobile google, such as google maps, google mobile and gmail.

    the last 2 days, I have a problem with the web browser. When I tried to look for something using the blackberry browser in the option "go to." I often encounter the blank page, especially those who use the option of google browser. When I turn to yahoo, the browser works well. The white screen also happen when I tried to type a web address like wikipedia.org and so on. The blank page still occur. About the "white page", the loading screen appears when complete loading, the display leave only space. left was only the scroll bar down on the left.

    I tried to solve why it was going on, the google browser in the option "go to" can work when I change the "encoding". I tried encoding, and I found one working (partially). Initially the encoding was auto and shows the ISO-8859-1. the work of encoding is ISO-2202-CN. Google has worked, but the web address bar meet the "white screen" problem

    I called the customer Service of my operator, DiGi. They guide me to solve the problem. Traction on the methods of battery, change of TCP/IP in advanced option, the activation of the APN setting. And the last option the guide was the "cloth of security." I did the back to the top of my data. After followed all the instructions, I still have the problem. Worse, I tried to download the google app again after the wipe 'security' the said seeing my phone number was invalid.

    I can't understand what is happening with my phone. At the beginning I had on the phone, I was really excited and impress with blackberry. After that things happen, I'm very disappointed. Is there someone out there who could help me?  I love my blackberry...

    Kind regards

    latifnoh

    Hi, I solved my problem. It is not the browser connection, his concerns setting up the blackberry, the might of the OS. I called several times (my carrier DiGi) and the solution was not there either. so the I thing this must be my BB is the problem, then I send it back for warranty service and what they're - format the OS.

    I'll be just mine yesterday and everythings back to normal. Everything inside seems a new one, as a new BB haha... Thanks be to God.

    He hopes to help! HAPPY!

  • No options display in the regions and languages of Windows 7 Home Premium.

    Hello

    I need a support from you,

    I bought a setrday tour here in Germany with Windows 7 Home Premium. But it came with Deutsch as a base language that I have no idea how work with the menu of the screen of welcome and all in German and I'm on pain. I am an Indian and working with the English and not able to find an option called 'Display language' keyboard and languages to change the display language tab. How if I could do that. Help, please.

    The ability to change the language is one of the features that distinguishes the pinnacle of the cheaper versions - product differentiation. Like any company Microsoft have the right to charge what they want for their products. Their websites explain this, for example:

    http://Windows.Microsoft.com/en-us/Windows7/products/compare?T1=tab15

    I fear that it is a case of caveat emptor.

    You might try sweet-talking to the company you bought the laptop from giving you an English version, purchase an English version or Ultimate.

    Good luck.   :)

    All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

Maybe you are looking for