Sound problems with the Portege M600 using WXP SP3

I had problems with my laptop and feel so frustrated his ongoing - please help!

I downloaded the audio driver (abt a million times - and tried to uninstall and reinstall)- and repeatedly get no icon of volume on top of desktop and a message saying "no sound driver are."

I managed to repair once - when I had WIndows Vista installed - by finding a dark patch - but this time - no solutions.

Can anyone help - it's so frustrating!

If I m remembering well, you need to install all the service packs and KB888111, KB835221.

Please, do it and see the results.

Tags: Toshiba

Similar Questions

  • Laptop G60-549DX (with OS Windows7-problem with the microphone when using Skype)

    Just bought a laptop G-60-549DX. His mic is BAD. Voice of cuts to when using Skype. Help!

    I was able to solve the problem with the microphone on the G60-549DX when using Skype.  I spend up to 6-8 hours, talk with convenience stores of HP.  They were very friendly and helpful.  The same help a friend.  My friend downloaded updated bios and micro drivers.  HP technician asked me to turn off the laptop, then remove the battery, unplug the power cord. With battery removed and stop, I pressed the market / off power button for a good minute evacuate remaining power into the computer. When I restarted the laptop I micro worked. I did a little more fine-tuning of the installation of the microphone.  Now, it works well on Skype and sound recorder. I won't take this back within the 14 days return policy.  It's a good computer I can say.  The technicians were all very friendly and helpful.  They called me several times to check to see if it still works OK! They are HUGE!  They want to help with any other question, I have perhaps with the computer.  Thank you very much for the help. Everyone was SO helpful.

  • Seeking help with a problem with the LR I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message, "could not create a JPEG sponsor limit you 92 k Bytes.Plea.

    Seeking help with a problem with the LR


    I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message.

    "Could not create a respondent JPEG limit you 92 k Bytes.Please increase the size limit files
    . (1).

    .....

    I tried to increase the size of the file several times,

    I left LR

    I restarted the computer.


    Any help or advice for this problem will be greatly appreciated


    Thanks in advance


    @stu

    Not because of the number of pixels, in this photo and the chosen level of quality there is no possible way to create a JPG file to the size of file you requested. You must change your export settings.

    Show us a copy of the export dialog box, so we can see clearly the part file setting and the size of the Image.

    Also indicate the number of this image (width and height) pixels after cropping (as appropriate) and prior to export.

  • Problem with the compilation by using the new compiler (Compilation failed during execution: compilation-abc)

    Hello

    Since the release of the fast compiler, I experienced problems with the compilation of the version release with it.

    As it was still in beta, and since it was still possible to use the legacy compiler, I chose to use the legacy compiler each time (especially since it was more stable).

    With this 64-bit iOS requirement came into play on February 1, the legacy compiler is no longer available because it has been completely removed from AIR 16 (and all future versions).

    Now, I can no longer compile release versions (debug versions are works well) because I have the following error every time:

    Error occurred during the application of packaging:

    Stack dump:

    0 program arguments: C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/bin/compile-abc / compile - abc.exe - mtriple = armv7-apple-ios - filetype = obj - sdk C:\Program Files\Adobe\Adobe Flash Builder 4.7 (Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/lib/avmglue.abc 64-fields C:\Program Files\Adobe\Adobe Flash Builder 4.7 (64 Bit)\eclipse\plugins\com.adobe.flash.compiler_4.7.0.349722\AIRSDK\lib\aot/lib/air-fields.)) arm-air.txt-O3-ane-symbol = MmgCmApiExtInitializer - ane-symbol = MmgCmApiExtFinalizer - ane-symbol = MmgRbApiExtInitializer - ane-symbol = MmgRbApiExtFinalizer - ane-symbol = MmgStoreKitApiExtInitializer-ane symbol = MmgStoreKitApiExtFinalizer-ane symbol = MmgGoViralApiExtInitializer-ane symbol = MmgGoViralApiExtFinalizer-ane symbol = MmgGaApiExtInitializer - ane-symbol = MmgGaApiExtFinalizer - ane-symbol = MmgGAIDFAAccessApiExtInitializer - ane-symbol = MmgGAIDFAAccessApiExtFinalizer - ane-symbol = AFExtensionInitializer - ane-symbol = PushwooshExtInitializer - ane-symbol = PushwooshExtFinalizer elease-temp\AOT\AOTBuildOutput4982262150932522887.tmp\ABCFilesList.txt-abc-file-list=C:\BingoIslandWeb\Client-branch-1.06.05\BingoIslanMobile\BingoIsland\bin-r

    Compilation failed during execution: compilation-abc


    I tried to pin-point the source of the problem leaving specific things in the code, while removing all the rest,

    But so far, all I could find is that he has a problem with the classes that extend EventDispatcher.

    Anyone encounter this problem and knows how to work around it?

    Thank you!



    I had this problem also with other things. It was difficult to solve. Remove all const and var conversion in the Document class solve my problems

  • Display problems with the Portege R600 and Win 7

    I have a R600 running windows 7, every two minutes, I have a display problem where where the vertical pixels seem to get every centimeter unaligned, so my screen seems to blur digital in bars across it.

    I have an external monitor attached and get the same problem with or without him. I have tired the driver of toshiba and intel driver.

    It seems to go away if I have windows min and max, but sometimes it doesn't. If I run my mouse an affected area, that it seems in trouble and sometimes it's not all screen.

    A refresh solves it.

    Anyone have any ideas?

    > I have an external monitor attached and get the same problem with or without him.
    Maybe I m wrong but in most cases if these symptoms are seen on the two displays (internal & external) then a graphics chip could be affected
    It would be the worst case, because that would mean that the motherboard needs to be replaced

    But just a question; have you noticed that using the previous Windows OS preinstalled by maybe Toshiba (Win XP or Vista), you must install the image of Toshiba again to verify if this display problem is still visible

  • HP Photosmart 6520 and problems with the air IPAD using IOS 8.0.2

    Used APPLE IOS 7. No problem with printing to the 6520. Now, I've updated to version 8.0.2. now, to get a message on the IPAD, saying: 'no printer not found '. No printing from laptop to printer and no problem shows on laptop as the printer selected in the folder devices and printers. Y at - it an update of software of HP to run version 8.0.2. .

    JERENDS, thanks for your response. I had already tried the "hard restart" at the suggestion of the Apple Tech Help, but that doesn't seem to help. But late last night after posting my question Imtried print again and IPAD are my printer without problem. Why he couldn't find yesterday morning but has been able to find it later in the day is one of the mysteries of life, I guess.

  • problems with the search by using the CIS application.

    Hello

    We are able to connect to the server of Stellent of our J2EE application using our java code CIS.
    while performing research sometimes we get the error and sometimes it works fine (no change in the code)
    We use the socket to SCS connection type to connect via adapterconfig.xml
    Server details:

    CS: 10gR 3

    Please let me know the reason why he acts differently and on what basis we receive this error is also not known. :(

    ... On our J2EE server console, we get the following:

    2009-03-13 14:37:08, web-0 420, WARN (com.stellent.cis.server.api.scs.protoco
    l.impl.HDAProtocol) - could not find the end of header marker! ()
    2009-03-13 14:37:08, web-0 420, WARN (com.stellent.cis.server.api.scs.protoco
    l.impl.HDAProtocol) - did not read all the headers entry, attributing the type EXERCISE
    WN_TYPE

    -------------------------------------------------------
    Of the CommandException stack trace:

    com.stellent.cis.client.api.common.CreateAPIObjectException: error reading the answer of the content server: com.stellent.cis.server.filetransfer.SCSContentTransferStream: could not initialize class com.stellent.cis.client.api.scs.search.impl.SCSSearchResponse with the object of type com.stellent.cis.server.filetransfer.SCSContentTransferStream
    at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:62)
    at com.stellent.cis.client.command.impl.CommandFacade.executeCommand(CommandFacade.java:158)
    at com.stellent.cis.client.command.impl.BaseCommandAPI.invokeCommand(BaseCommandAPI.java:84)
    at com.stellent.cis.client.api.scs.search.impl.SCSSearchAPI.search(SCSSearchAPI.java:92)
    at com.pg.emfg.ewps.stellent.service.impl.StellentDMSServiceImpl.searchString(StellentDMSServiceImpl.java:348)
    at jrun__search2ejspb._jspService(jrun__search2ejspb.java:124)
    at jrun.jsp.runtime.HttpJSPServlet.service(HttpJSPServlet.java:43)
    at jrun.jsp.JSPServlet.service(JSPServlet.java:106)
    at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
    at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
    at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:241)
    at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:527)
    at jrun.servlet.http.WebService.invokeRunnable(WebService.java:172)
    to jrunx.scheduler.ThreadPool$ DownstreamMetrics.invokeRunnable (ThreadPool.java:348)
    to jrunx.scheduler.ThreadPool$ ThreadThrottle.invokeRunnable (ThreadPool.java:451)
    to jrunx.scheduler.ThreadPool$ UpstreamMetrics.invokeRunnable (ThreadPool.java:294)
    at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
    Caused by: com.stellent.cis.client.api.common.CreateAPIObjectException: error reading the answer of the content server: com.stellent.cis.server.filetransfer.SCSContentTransferStream: could not initialize class com.stellent.cis.client.api.scs.search.impl.SCSSearchResponse with the object of type com.stellent.cis.server.filetransfer.SCSContentTransferStream
    at com.stellent.cis.client.api.scs.impl.SCSObject.intialize(SCSObject.java:130)
    at com.stellent.cis.client.api.scs.impl.SCSServerBinder.intialize(SCSServerBinder.java:91)
    at com.stellent.cis.client.api.common.impl.CISAPIObjectFactory._initializeObject(CISAPIObjectFactory.java:250)
    at com.stellent.cis.client.api.common.impl.CISAPIObjectFactory.createObject(CISAPIObjectFactory.java:181)
    at com.stellent.cis.server.api.scs.impl.SCSCommand.prepareResponse(SCSCommand.java:300)
    at com.stellent.cis.server.api.scs.impl.SCSCommand.execute(SCSCommand.java:225)
    at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:57)
    ... 16 more

    Thanks in advance

    Prasad.V

    Hi Prasad,

    The above error is thrown when the socket with Content Server connection is terminated before that Content Server is able to send a full response. Most often, this occurs when the connectionTimeout for the CIS adapter is set to a shorter time than necessary for the Content Server service call ends.
    Note: The error message above also can be lifted during network downtime. Before proceeding with the solution below, you must make sure that there is no problem of network between the CIS Forum and the content server environment.

    -To implement the solution, please perform the following steps:
    1. open a browser and go to the page of information system Audit in the Content Server Administration section.

    2. in the Sections Tracing information section, select system, requestaudit, searchcache searchquery for the text box active Sections.

    3. make sure the Full Verbose Tracing above than the active Sections text box is checked.

    4. click the update button.

    5. at the top of the System Audit information page, click the link View Server output.

    6. on the page out of the server, click the clear button. Leave this window open.

    7. through the application of the CIS, submit the longest race of service or who causes the above error.

    8 return to the window of the browser in step 6, and then click the Refresh button.

    9 review the requestaudit tracing messages and find the service call that takes the most time. In most cases, this will be a GET_SEARCH_RESULTS call, other calls for service can also take some time. Below is an example of line tracing requestaudit showing a second service call 45.536.

    02.09 requestaudit 11:07:54.523 LONG_SEARCH_CUSTOM_SERVICE IdcServerThread-30944 [dUser = sysadmin] [QueryText = dDocTitle + % 3csubstring % 3F + % 60test % 60] [StatusMessage = success] 45.536 (dry)

    10 once the longest running service call is identified, add a reasonable buffer (e.g. 10-15 seconds) to take account of the additional load on the server. This amount of time of the call of service and the amount of memory buffer will be the value used for the connectionTimeout value.

    11. in the adapterconfig.xml, the node connectionTimeout for the CIS adapter to the value calculated in step 10. Please note that the value for the connectionTimeout configuration is specified in milliseconds. For example, if calling the function running longer, more buffer memory is about 60 seconds, then the value of connectionTimout can be assigned to 60000.

    12 restart the CIS Forum and the test.

    Hope this helps

    Thank you
    Srinath

  • Capture problems with the Portege M200

    Hi, I have developed a directshow application which captures the screen and stores it in a movie file. It has filter to capture-> WMVideo encoder DMO-> Avi MUX-> burner leader. The application works fine in the Toshiba protégé 3500 Series with trident video accelerator on this card. But it does not work on Toshiba protégé M200 machine with NVIDIA GeForce 5200 video on that card. Basically, the application captures one image.

    If I remove the compressor filter it captures so correctly. I want to know what is wrong with the machine. With encodre why there is not capture. I tried on other machines with NVIDIA video card series and it won't work as well. Why is it so?

    Hello

    Well, maybe your application has a bug?
    Unfortunately, I m not programmer or application developer and I can't solve this problem. Sorry, but I don't think that you will find here the answer to you question because most of the users are users of laptops Toshiba common not a developer of applications. :(
    Good luck

    Good bye

  • Problems with the Portege M700 command

    I would like to order the Portege M700-S7008 with 2.40 ghz, turbo cache + qwerty US keyboard, which is available on the site of toshiba, based in the United States.

    On my local site toshiba I can only find Portege M700-10O (which no a 2.20 ghz, turbo cache, BE-azerty keyboard), which is certainly not what I want. But the US site has no option to ship international.

    What should I do?

    Hello

    the fact is that the machine with the desired configuration is only available in America. Since Toshiba sells for all countries separate the configurations you have only 2 options:

    1. find a Distributor on google which could help you and sell / send you the machine with THIS configuration

    2. or you can wait some time with obtainig of this machine, maybe toshiba europe will give an offer that you need in a few weeks. Usually (AFAIK) Toshiba europe is not always parallel with their services and offers as other countries. This also applies to other countries such as the Australia, the Canada or Britain.
    I think that little patience and you will get what you want or need.

    Welcome them

  • BlackBerry Z10 problems with the battery while using the LTE

    Given that I am connected to LTE (4 G) battery is not longer than 8 hours. Is this normal?

    Use of the battery can vary from one user to another, based on dozens of factors, including running applications, intensity of the mobile signal, the overall health of battery, use of data, etc. There is no use of a normal battery without comparing many factors.

    But 8 hours use of the battery can be normal that Q10 with moderate to heavy use in an area with a great LTE signal at least.

  • No driver found for the new USB drives don't. No problem with the devices previously used.

    Hi, I can not install any "new" USB keys or USB external drives. The error is "driver not found".

    The thumb drives and external drives that I've used are working properly. The error is for the devices was not used in this machine.

    I tried to follow a tip on a site and deleted INFCACHE.1 (after creating a restore point), but it has not changed the behavior.

    Windows 7 32 bit.

    Kind regards

    Check if you have limited the available somehow drives... possibly VMWare has reserved
    the drive letters. Best is to check with the VMWare Support and forums.

    Look in Windows disk management and see if something is there.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Problem with the Internet connection using IE7 and Windows Vista

    Hi all

    I don't know if I'm in the right forum, but I need someone, help please...

    I just bought a new XPS420 with Windows Vista Home Premium and IE7 already installed.  The 2-3 days, internet worked very well.  Now, whenever I open IE7, I get a message on the connection not found or something like that.  I did some research and some forums suggest to reset IE7 using Tools/Internet Options / Advanced.  It worked... but only temporarily.   After that I turned off my computer and turned back on later in the day, open to the top of IE7, it does not work yet.  If I turn off the modem, it does not.  If I do a reset, as shown above, it would work again.

    I finally called AT & T Tech support, but they could not diagnose the problem.  While we were on the phone and try to open and close IE7, and that is, I logged.  Then to test, I turned off the computer and turned it back on and of course, internet Explorer did not work.  The AT & T guy me open system information to check the properties of the network and all said that "this device works correctly.   He also suggested to disable my anti-virus program (I have preinstalled MacAfee), which I was very reluctant to do. So before you disable MacAfee, I tried IE and it worked, so I was happy.  I closed the browser and open it again and it worked; turned off the computer and turned it back and the browser did not work.  I already lost count how many times I had to do that!   When I click on diagnose the problem, I got a message on xxx.xxx.x.xx DNS. do not answer, as the server ping the remote host, but does not got a response.  On hearing this, the representative said that it must have something to do with Vista and that perhaps the OS has not been installed correctly and he suggested that I contact the place where I bought my computer and ask them to reinstall.

    He also asked me to install Firefox as an alternative.  When I did, it worked.  But IE7... at the time.  I could not afford to shut down my computer once again because I was already late to work, but I guess I'll find out later. But maybe I have to use Firefox if IE does not work.  I have not really tested who. Is the thing with Firefox, it is not compatible with our applications work as well as web pages, I am trying to access (I tried one before I left) a work t look the same and difficult to navigate. And it shows "protect on" on the lower right of the browser that performs the same way, he shows up on IE.

    Sorry for the long post, but I also need to evacuate.  The resolution could really be as simple as turn off the anti-virus?  But then, how to get us protected?

    Help, please!  I'm so desperate for a solution.  My mother also uses this computer to access its work files.

    Thank you
    Remms


  • Problems with the Web Service using XML in Flex

    Hello

    I use a ColdFusion CFC, which is configured to generate an XML string. It runs on ColdFusion MX 6.1 and is configured as a remote web service. I tested the call and it returns the string XML fine when it is called from another method of Flex unfounded. My problem is this simple Flex application to call the same function via a service web, I wrote below. I cannot get to the exit results, keeps showing as NULL. I can't use the HTTP of Flex appeal for remote access because I'm not under MX7. Does anyone know what is wrong with my code? BTW, I would do the work of cross - domain.xml file to call the cfc, let me know if you want to test and I can add your domain name. Thank you!

    <? XML version = "1.0" encoding = "utf-8"? >
    "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute" >

    <! - set Web Service to get the XML data of course catalog - >
    < mx:WebService
    ID = "cd".
    "WSDL =" http://training.wonderware.com/components/courses.cfc?wsdl "
    Load = "CD.getCourseCatalogXML.Send ()" "
    showBusyCursor = "true" fault = "Alert.show (event.fault.message), 'Error' ' result =" cdResult (event) ">"
    < mx:operation name = "getCourseCatalogXML" resultFormat = "e4x" >
    < mx:request >
    < IDCalendrier > 3 < / IDCalendrier >
    < / mx:request >
    < / mx:operation >
    < / mx:WebService >

    < mx:Script >
    <! [CDATA]
    Import mx.controls.Alert;
    Import mx.rpc.events.ResultEvent;
    Import mx.rpc.events.FaultEvent;

    [Bindable]
    public var outputString:String

    public void cdResult(event:ResultEvent):void
    {
    outputString = event.result as String
    }
    []] >
    < / mx:Script >

    < mx:Canvas horizontalScrollPolicy = "off" verticalScrollPolicy = "off" >
    < mx:Text width = '100% ' paddingLeft = "4" paddingRight = paddingTop "4" = "4" >
    < mx:text > OUTPUT: {outputString} < / mx:text >
    < / mx:Text >
    < / mx:Canvas >

    < / mx:Application >

    Thank you very much! I do not have the notion that the HTTPService is indded just an HTTP call. So yes that it a much simpler way to call just ColdFusion to return the XML string to the application. No reason to use Flash Remoting or CFCS etc... and certainly not a web server. This made the turn that I called a HTTPService now what charges by coldfusion page that returns XML and bam, works well with e4x result etc... Thanks tracy!

  • Problem with the configuration to use Silver Style with labview 2011 (32-bit)

    Hi my friends.

    I installed labview 2011 32 bits. I select money style my default control style. but when I create the new VI, labview creates no controls in the silver model

    the controls are created in modern style.

    can someone help me solve this problem?

    with all my thanks: Saeid

    If you're down by controls via the palette, then it will drop any type palette you are in.  You are most likely in the range of modern control.  The setting that you are talking about is when you create a command or the indicator by right-clicking on a primitive terminal.

  • Problem with the new camera using Bridge Photo Downloader

    I have the new Olympus E5. I can't use the Photo Downloader in Bridge for RAW files. It is not convert ORF (RAW) files to DNG.

    Adobe updates the plugin as soon as possible for the new models of cameras Camera Raw. In the meantime, you can use a software that came with your camera.

Maybe you are looking for