Sound stops after a few seconds on you tube

Similar Questions

• Windows import video repeatedly stops after a few seconds when you use DV cam to convert and import analog videos

  With the help of a Canon Elura 40 mini DV camera to import my old Video 8 tapes to the .avi format. I followed the instructions from http://windows.microsoft.com/en-US/windows-vista/Import-analog-video-to-your-computer-by-using-a-DV-camera . However, when I click Start import import will work only for a few seconds and then stops. If I keep restarting after that it stops every time (5 to 10 times), I finally get a message under the controls of cam DV that says "commands does not. Then it will keep the import without problem. I discovered this solution accidentally, but not knowing when it will eventually continue to record does get the departure point. If I import directly using a digital camera 8 this is not the case, but the Video 8 does not play well on the Digital 8.

  Thank you.

  Hello

  Method 1: You can follow the steps described in the article below that addresses this question

  Error message when you try to import video clips from a device on a Windows Vista-based computer: "the import device is not responding.

  http://support.Microsoft.com/kb/922977
  

  Method 2: you can follow the steps mentioned in the link below

  
  Troubleshoot importing video problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-importing-video-problems

• Audio playback starts and stops after a few seconds

  original title: Audio playback

  By my speakers (Windows 7) starts and stops after a few seconds.  I have troubleshooted but found no problem.  I configured and tested with good results, but the problem persists.  Anyone else know this or knows how to solve the problem? PLEASE HELP :)

  Hi NuttyNetty444,

  If you have not already the case, follow the steps in this document. This should solve most common sound problems in Windows.

• Remote Desktop connects then stops after a few seconds

  I have two laptops to Windows 7.  We run OpenVPN which I will refer to the VPN server.  The other is the Client and with me on trips.  Open VPN is configured on the Client and the VPN server, and I can connect from inside and outside the network without any problems.  I also have an Open VPN Client with another port configured on a server QNAS.  I can connect without any problems.

  I want to run the OpenVPN server on one VLAN separated to prevent users to see my internal network and only sees another NAS.  I also use the VPN to offer our few users (3) the ability to connect and use my static IP address.

  I have a router TP-Link-ER-6120.  I can configure the three ports to run in 3 separate VLANS.  When I configure the VPN server works on my regular network to exploit the VLAN1 and VLAN2, I can always connect to OpenVPN and all I want to do works (NAS and Internet access with my static IP).  However, when I try to establish a Session to the VPN server computer remote desktop, I get the login and enter my user name and password.  I see the remote desktop window, open and usually see the remote desktop wallpaper and loading the desktop icons.  Then it crashes.  If he does until I can see the desktop, it automatically attempts to reconnect.  If she makes it that far, it stops with a window that says Remote Desktop connection has been disconnected.

  If I come back in the configuration of the router and change the configuration of VLAN for the server VPN is on the same virtual network, I can connect and the remote desktop connection is successful, as long as the customer is located on my network.  If I connect the Client to the VPN server from outside my network in this configuration, the remote desktop will always fail in the same manner described above.  I also have a QNAS on my network with OpenVPN configured and operational.  If I connect the Client computer to the QNAS, I can connect to the VPN server until the VPN server is placed in its own VIRTUAL LAN.

  Thus, work Desktop connections to local computers.

  However, since a remote off-grid remote office connections begin to work, but are stopped when connecting.

  -J' I ping the VPN server during connection attempts and never lose the connection.

  -J' used telnet to Server VPN 3389 port and it connects.

  -J' turned off the firewalls on both sides and went up to remove Symantec on the VPN and BitDefender server on the side side Client to use Windows Firewall on both.  And then disabled Windows Firewall as well and still no joy.

  Is there a setting in Windows I'm missing that allow the desktop connection remote on the LAN, but not enable during login remotely even if I can ping, telnet and usually access the rest of the network?

  Is it maybe a configuration problem on the side of the router?  Installation side route is a very simple graphic interface.  I configured for the VPN service roads and they remain in place (one for the QNAS) and one for the OpenVPN server.  I set up a static route (virtual server) for port 3389 go directly to the IP address of the VPN server, but that did nothing.

  Miss me probably something simple, but it launched my ass for weeks now.

  Any ideas?

  Hello Michael,

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  By the description, I understand that the problem with remote desktop connects and then stops after a few seconds on the system.

  Certainly, I understand your concern and will try my best to help you.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• ISA 550W: Youtube streaming stops after a few seconds

  Since I installed the ISA 550W, Youtube videos stop after a few seconds. It happens on all my devices: Windows 8, Samsung Smart TV, Android, Windows Phone...

  I have the lates firmware.

  This problem doesn't happen with the other streaming like DailyMotion site.

  I disabled HTTP antivirus but it changed nothing. Web browsing is faster.

  Application control is not enabled.

  Any idea? Thanks in advance.

  Have you tried turning off all other security settings (i.e. an IP)?

  Have you tried to return to the previous firmware to see if the problem persists?

  Shawn Eftink
  CCNA/CCDA

  Please note all useful messages and mark the correct answers to help others looking for solutions in the community.

• Do not get the audit trail for oracle solaris running. It starts and then stops after a few seconds. How can I set up a secure target Oracle Solaris? cure

  I have installation BSM on my solaris 10 Server. I configured BSM to be sent to syslog. I registered my target secure on the server of the AV type Oracle Solaris. Add an audit trail of pointing to the syslog file. The Audit Trail starts and stops after a few seconds. the error I get from the agent log is

  [2014 11-25 T 11: 36:38.647 + 02:00] [collfwk] [ERROR] [] [] [tid: 10] [ecid: 192.169.1.50:11353:1416908198895:0, 0] FVO-8015: initialization of the instanceCollectionController AuditEventCollector error: run: process() Exception. [[

  Instance of Error initializing AuditEventCollector

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:322)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  Nested exception:

  java.lang.NumberFormatException: for input string: "invalid audit trail: / var/adm."

  at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)

  at java.lang.Integer.parseInt(Integer.java:449)

  in java.lang.Integer. < init > (Integer.java:660)

  to oracle.av.platform.common.exception.AuditException. < init > (AuditException.java:118)

  to oracle.av.platform.agent.collfwk.AuditEventCollectorException. < init > (AuditEventCollectorException.java:59)

  at com.oracle.solaris.SolarisCollector.initializeCollector(SolarisCollector.java:86)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:316)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  ]]

  [2014 11-25 T 11: 47:49.248 + 02:00] [collfwk] [ERROR] [] [] [tid: 11] [ecid: 192.169.1.50:11353:1416908869249:1, 0] FVO-8015: initialization of the instanceCollectionController AuditEventCollector error: run: process() Exception. [[

  Instance of Error initializing AuditEventCollector

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:322)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  Nested exception:

  java.lang.NumberFormatException: for input string: "invalid audit trail: / var/audit.

  at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)

  at java.lang.Integer.parseInt(Integer.java:449)

  in java.lang.Integer. < init > (Integer.java:660)

  to oracle.av.platform.common.exception.AuditException. < init > (AuditException.java:118)

  to oracle.av.platform.agent.collfwk.AuditEventCollectorException. < init > (AuditEventCollectorException.java:59)

  at com.oracle.solaris.SolarisCollector.initializeCollector(SolarisCollector.java:86)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.initialize(CollectionController.java:316)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.process(CollectionController.java:402)

  at oracle.av.platform.agent.collfwk.impl.controller.CollectionController.run(CollectionController.java:350)

  at java.lang.Thread.run(Thread.java:662)

  ]]

  Can you please help with instructions/solution implementation of Oracle Solaris secure target? A beginner in Audit Vault.

  I have the installation path for the database and which works very well

  concerning

  Thanks for the pointers. After you add hostname to the location of the trail, the audit trail is running

• 17 flash drive: videos played in Google Chrome stop after a few seconds

  Hello

  all the videos played in Google Chrome, stops after a few seconds after the upgrade to version 17,0,0,134 on Windows.

  Thank you

  I restart the pc and it works now, thanks.

• Satellite A110-180 - fan starts but stops after a few seconds

  Hello

  I have a Toshiba Satellite A110-180 and when I turn on the computer, the fan turns on but it stops in a few seconds and starts again in a while and stops again and starts... Then the laptop gets heat quickly.

  I bought the laptop about 5 years ago, so I think the problem is the fan or the circuit that controls the fan. Can someone who has had the same problem make sure that the fan is the problem?

  The fan part number is ATZHG000500. Does anyone know if a fan with P/N ATZHG000100 is compatible with my laptop, or if I can use another fan?

  Thanks for your help,

  Hey Wiley,

  First of all it of normal that the fan starts and after a few seconds, or 1 minute stops. Depending on the programs you run again the departure of fan after a few seconds or minutes. So, theoretically, it of normal what is happening.

  But if your laptop is almost 5 years old, you should try to clean. So I can recommend jet of compressed air. This could blow out the dust from the cooling fans. It is very cheap but very useful.
  Check it!

  In addition, I think that the thermal paste should be renewed a technicians authorized laptop can help you and answer if the other fan part number fits in your laptop. :)

• Playback stops after a few seconds when streaming, slows down after a few seconds, when I look at D/L had video offline.

  Hi all

  I'm having a bit of a hairy problem - * ANY * video streaming, whether it be HTML5 or Flash stops after a number of seconds (rare) seemingly random.  YouTube, I sometimes get a buffer wheel to turn constantly, sometimes nothing.  On Facebook or other sites, nothing happens - freeze just a video.  Internet high speed or bandwidth is not a problem - 50/50 FiOS here.  Sound œuvres until frost.

  I tried to download videos in FLV Downloader, but when I look in the Media Player, they slow down until they are very bad after a period similar to the streaming video.  His work sometimes until the downturn, sometimes does not at all.  VLC plays the video at the right speed, but without the sound.

  I tried deleting and re-installing flash player, run a restore point when the video was working and all the other stuff I tried, but nothing worked and I'm stuck.  I have no idea how to solve this problem.  It happened randomly yesterday (apparently).

  If anyone has any ideas, I'd appreciate a helping hand.  I am a student that takes about half of its classes online, so without flash or HTML5 video, I'm in all sorts of trouble.

  Thank you

  Matt

  * edit * on a whim, I just open Spotify to see if that would work.  No bone.  Nothing plays.  Not at all.  The music does not play in Media Player, (local or streaming)

  Well, it seems I solved the question - I have no idea why this is happening.  I have a Logitech G35 Headset.  Sometimes when I restart Windows, I get sound out of it (usually noticed during a Skype call).  If I unplug and re - connect the headset, everything is hunky-dory with the sound and Skype.

  I just had to do, and when I did, all the videos and other media began to work very well.

  I'm cursed confused.

• Adobe Acrobat stops after a few seconds

  Hello

  Recently, some of our users are problems where Adobe Acrobat Pro XI (11.0.16) stops after having been open for a few seconds.

  OS: Windows 8.1

  What I tried:

  • Removal tool including vacuuming (Download Adobe Reader and Acrobat tool - Adobe Labs ) can clean installation
  • Removal and remove manually the remaining records in C:\User\username\appdata\roaming, local and locallow, removing everything related to Adobe acrobat form the HKLM\Software and HKCU\software... then clean install
  • Adobe running with administrator privileges and it runs under a different user account
  • Removing and installing a version previous (11.0.05), which had the same stop to unextected
  • Removed the preferences as described here How to reset preference settings in Acrobat format.  (Note that he had no new folder preferences created after moving the former again and start Acrobat)

  So far, I have still no idea why this happens and how to solve it. I hope you can help.

  Thank you

  Thijs

  Hi thijsm96483536 ,

  He did up no error message when it stops? If so, please let us know.

  Also, please try referring to this link: Acrobat XI hangs at startup

  Let us know if that helps.

  Concerning
  Sarojini

• I have an iphone 6 s running ios 9.2.1 my wifi disconnection and after a few seconds that it reconnects, it happens most of the time, help me thank you!

  I have an iPhone running iOS 9.2.1 6s my wifi suddenly disconnects, and after a few seconds that it reconnects, it happens most of the time help me thank you!

  It sounds like you have a fancy for your apple WIFI products name prefer digital alpha without space.

• * Media Player stops. My drive stops, then recovers itself after a few seconds. Screen goes black for 1-3 seconds, BUT Audio continues!

  I have Vista Ultimate, but I'm not very smart PC!   When I try to watch a video clip, etc., SEE above EDIT.  My drive stops, then recovers itself after a few seconds.  Screen goes black for 1-3 seconds, BUT Audio continues!  Then Visual back for a while until that the same thing never happens again anywhere!  Also the FAN spins-up like a jet plane taking off!   Help, please.  Thank you.

  Hi Peter,.

  1 have had any changes made on the computer before the show?

  2. which media player you use to play the video?

  3. the problem occurs on all the video clips?

  I would say as update you the video card drivers and check if the problem persists:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem is not resolved, please respond with more information to help you best.

  Thank you.

• Stor.E access point stops working after a few seconds

  Bought a Stor.E wireless adapter and followed the instructions but after turn on the unit by connecting to USB power usage provides cables, access point WIFI disconnects after 4 or around seconds.
  1. I connect to usb power
  2. the indicator flashes in green and stays on
  3. wireless light turns green and stay on, turns off after a few seconds

  Managed to connect using the mobile app several times, while its sequel, but given that the WIFI point disconnects, can't use it.

  Any thoughts?

  1. I connect to usb power

  Stor.e wireless adapter must be connected to the power supply and the other end to the external HARD drive.

  

  Then, you can use the application to access the wireless content.

• Satellite M100-165 cannot stop - turns on automatically after a few seconds

  Hello!

  I have the problem of identical or very similar to those described in the threads:
  Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=15325]
  Link: [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=109125]

  When I try to turn off my Satellite M100-165 ("shut down" in Windows or even by pressing the power button while I'm in BIOS) it lights up after a few seconds. It lights when it runs on batteries. She also doesn't appear when I press the button for 4 seconds.

  I tried to recover the system with the recovery CD (Windows XP Home). I also tried with Windows Vista. Always the same.

  In fact I have BIOS version 2.90 (updated from version 1.90, as far as I remember) but with an earlier version, the problem exists also.
  I think when I got the version of the BIOS before 1.90 this problem did not exist (but I don't remember this version number).

  Thank you for any suggestions.

  Hello

  It's a very unusual question and, for me, there is not just some explanation. It will be interesting to know what Toshiba experts say on this subject. Make a call and let us know what they say.

  The strange is that the same thing will happen with two different operating systems. I can't say for sure why this happens, but your laptop is a bit confusing and of course change the shutdown with restart. If it is result of BIOS update service people should know about it.

• IPhoto 9.4.2 hangs on Macbookpro OSX 10.8.5 after a few seconds.

  IPhoto 9.4.2 hangs on Macbookpro OSX 10.8.5 after a few seconds.

  'Certain inconsistencies in the library'-> recover, but it does not help.

  What to do now?

  Here are the first lines of the report:

  Process:	iPhoto [66579]
  Path:	/Applications/iPhoto.app/Contents/MacOS/iPhoto
  Identifier:	com.apple.iPhoto
  Version:	9.4.2 (9.4.2)
  Update information:	iPhotoProject-710042000000000 ~ 2
  Item App ID:	408981381

  The external application ID: 11723545

  Code type:

  X 86 (native)

  Parent process: launchd [287]

  ID of the user:

  501

  Date/time:	2016-01-05 20:39:54.165 + 0800
  OS version:	Mac OS X 10.8.5 (12F2560)

  Report Version: 10

  Interval since last report:	14627 sec
  Crashes since last report:	2

  Per-App interval since last report: 994 sec

  Per-App crashes since last report: 2

  Anonymous UUID:

  049D7CBC-B1B5-12F4-7308-621A449425D7

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGSEGV)

  Exception codes: KERN_INVALID_ADDRESS at 0x00000000c52f59f0

  VM regions near 0xc52f59f0:

  Shared CG images

  c 00000000 00000000 0001000 c 0009000 [32K] rw-/ rw - SM = SHM

  -->

  Shared CG images

  00000000c5b33000-00000000c5b3b000 [32K] rw-/ rw - SM = SHM

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  0 com.apple.JavaScriptCore		0x921123ae JSC::DFG:GPRTemporary:GPRTemporary(JSC::DFG::SpeculativeJIT*,_JSC::DFG::StorageOperand&) + 110
  1 com.apple.JavaScriptCore		0x92142dc4 JSC::DFG:SpeculativeJIT:compile(JSC::DFG::Node&) + 59684
  2 com.apple.JavaScriptCore		0 x 92113929 JSC::DFG:SpeculativeJIT:compile(JSC::DFG::BasicBlock&) + 889
  3 com.apple.JavaScriptCore		0x92115b85 JSC::DFG::SpeculativeJIT::compile() + 69
  4 com.apple.JavaScriptCore		0x9210001f JSC::DFG:JITCompiler:compileBody(JSC::DFG::SpeculativeJIT&) + 63
  5 com.apple.JavaScriptCore		0x92100e47 JSC::DFG:JITCompiler:compileFunction(JSC::JITCode&,_JSC::MacroAssemblerCodePtr&) + 231
  6 com.apple.JavaScriptCore		0x920fe73c

  iPhoto crashes on MacOS X 10.8.5, if you have enabled places.

  Do a test: If iPhoto will launch once you disconnect from the Internet, the solution is to disable access to Google Maps and disable places of research.

  The first versions of iPhoto 11 started to plant for many users suddenly last month.

  There is a problem with the functionality of the site, because Google maps will no longer be supported.

  See the solution of Huxly647:

  Huxly647 , November 20, 2015 12:05 AM
  Re: iPhoto crashes after opening several times in reply to carvermon Useful

  I found a solution that works for me...

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  Let me know if it works for you guys...

  Deletes two files "googlemap.html" and the googlesearch.html of iPhoto application bundle prevents the JavaScript running inside and causing the accident.  Log of course do the same thing. So it's pretty clear that something happened at the end of Google.

  To access the files inside the iPhoto application select it in the Finder and ctrl-click on it. Then use the command "Show Package Contents" from the menu.  Open the content subfolder and then resources.

  Do not try this fix without making a copy of the iPhoto application before trying to delete the two files of the entire application.