sovereign wealth funds are not loading the server

Similar Questions

• do not load the images

  On a server, I have some files in the main SWF loads SWF via loadMovie. But jpg loading in the main swf file by clicking on the small of sovereign wealth funds, does not load. Do not load the jpg. I use the same loadMovie. On my computer, locally it works. When I upload the site on the server the problem mentioned until occurs.
  
  Can someone help me?
  Thank you.

  I found the problem. The SWF file on the server is case-sensitive.
  I had the path indicated like this: loadMovie (' images/m1.jpg"); but the file was actually named "M1".
  Strange as it sounds the film plays well on my computer and the image was loading, but when I have downloaded the SWF file has not loaded the image because the image was called "M1" and my path was pointing to "M1".

• Animation stops in sovereign wealth funds Long

  I have a few presentations I am creating using a single Projector/EXE, including the two sounds and animation. They are quite long in terms of how many images, they (current is 16 K images +) and the problem I'm running into is that the animation keeps freezing at the end of the presentation. Audio continues to play, but the animation freezes.
  
  I have tried everything I can think of, but do not find one solution other than to divide the project in several sovereign wealth funds and their loading (loadMovie) external. Ideally, I would like to be just a single file, but it's the only way I can find to make it work.
  
  Is there a problem with Flash only plays not passed a number of executives?
  
  Anyone else run into this? Any help/suggestions would be greatly appreciated!
  
  Thank you
  Mike

  OK, I answered my own question...

  It seems that Flash has just one problem with a LONG timeline... I guess that another reason why to use clips of film has its advantages!

  Mike

• Additional licenses purchased in 2004, but they are not loaded on the server, and they can't find the hard copy of the licenses to load them in.

  Asked me to take over the COMPUTER Department of a small Christian school. They are running SBS 2003. They bought licences for additional client access in 2004, but they are not loaded to the server and they can't find the hard copy of the licenses to load them in. Also, they purhcased of XP Pro and Office 2003 licenses (I have the disks and keys to install but do not know how many licenses they own) and they are not either of the paper copy of these licenses. Is there a way to contact Microsoft to get the licenses? Any help would be appreciated.

  Bill

  original title: recover lost Volume Licensing

  I just figured this out...

  I called the 1-866-230-0560 Option 3 Volume licenses and talked to someone who searched under the name of the school in order to locate licenses. It is even searched under our zip code and found other licenses that have been purchased by the school where the dealer abbreviated the name of the school.

  I hope that this is useful information to others in the same situation.

  Bill

• imported from sovereign wealth funds, get the main swf data

  Hello world

  I'm shaking my old AS2 here school mindset. I have a main swf file that loads a bunch of subordinate sovereign wealth funds. I need my SWF to see some variables in the hand. For example (example simplified for conversational purposes), let's say I have a swf loading (we tell littleSwf), who has set his rotation based on a variable (we tell swfRotation) hand. Rotation code is inside the small swf. How does this small swf said / what is its number of rotation?

  How would I do that? I have tried everything I can think and did some research, but apparently not in the right places.

  Any input appreciated.

  Dan P.

  If you load the swf file in another, chances are you use a charger.  Thus, the charger becomes the parent of the loaded swf file.  And the main SWF is the parent of the charger.  So, using the most common mindset AS2, you want to get any variable in the main swf by a the parent.parent targetng... file that in AS3, can be done using... MovieClip (parent.parent).

  A correct way OOP to getting the value of the child rotation is to assign it to the swf main once it has finished loading the child.  To do this, you assign a loader listener to determine when the file has been loaded, and then you have the main file target the child through the Loader.content property.  You could then have a function in the child that the principal calls and passes the rotation value to as argument, or have just the main file perform the operation on the child using the value of rotation if it is appropriate.

• Most of the sites are not loading on all browsers

  Hello

  2 weeks ago my MacBook Pro was working fine and I used it on the internet using an Ethernet cable for the 1st time. Then I had to travel and come back 2 days without it. When I tried to use it via my WiFi router, I realized that most of the sites are not loading on safari, chrome, firefox, etc. Only Youtube, Facebook, Twitter, Apple.com, Google and Yahoo are working. When I try other websites I get messages such as;

  Unable to connect

  Firefox can't establish a connection to the server www.google.com.

  The site may be temporarily unavailable or too busy. Try again in a few moments.

  If you are unable to load any pages, check your computer's network connection.

  If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

  
  

  and

  
  

  Safari cannot connect to the server.
  

  Other applications using internet work very well. My router is also OK. When I use the laptop mode safe mode everything works fine and I can access the sites but I need my machine in its maximum capacity.

  Please help me, I would greatly appreciate it

  Thank you

  This is probably a problem with Server DNS (Domain Name). If you enter anything in the DNS domains for your Wi - Fi configuration, it rolls too the parameters provided by your router.

  The best way to dig you out of ANY configuration problem, is to set up again from scratch, using:

  System Preferences > network > Wi - Fi > (help me) > (Assistant)...

  Be sure to specify a set of 'Place' new, mnemonic name, NOT the default. After answering questions, don't forget to click (apply) and close the window to have the changes take effect. Now, this set of parameters can be applied "all at once" when you're back at this place.

  When, in another location, create a new package from 'Rental' from scratch, so as not to crush those who work somewhere else.

• I constantly get the error 'could not get new comments. One or more files are missing on the server.

  I constantly get the error 'could not get new comments. One or more files are missing on the server.

  It gets a little old. I know that the files are there. There is some ongoing compatibility issue?

  Hi kuntzmd

  Please visit: http://forums.adobe.com/thread/533034

  http://forums.Adobe.com/thread/33586

• Could not load the navigation for subject area? What does this error mean

  When I run the overall consistency check in my RPD. I get this error.
  Could not load the navigation for the business area.
  Source of the dimensional table has no column mapping.
  -What it means and how should I solve this problem?

  Hi friend

  Check if you have correctly joined on LTS (joins between the source tables: facts and dimensions). If you do not have joins on LTS you must create it.

  And also check if the BMML table columns are mapped to the correct table (propierties of each source table and select the tab "column mapping").

  Kind regards.

  Published by: Hammett81 on December 3, 2010 10:10

• Can not find the server/problem loading page

  I've made a few changes to a CFC that caused it not to compile. When I tried to access my web application it gave me the error as planned CF, pointing to my invalid code. I commented on the service out and reloaded my app. When I tried to view it in the browser, I'm greeted by an error can not find the server. What disturbs me is that I am able to access other web applications without an error cannot find the server in the browser. Does anyone know why an application would cause an error of cannot find the server and not others? I hope this is clear :) Any help would be greatly appreciated.

  Apparently I WASN'T looking to another web application, but a prototype html that the browser displays because he had no tags CF. The problem is that somehow the CF Server service was not working. It works... problem solved.

• Sovereign wealth funds in tilelist slow?

  I have a tileList component that I'm loading SWF in. One of my sovereign wealth funds has a particle system in it, and every time it is loaded in the tilelist component of the particle system slows down. Whenever the sovereign funds are loaded, I use tileList.removeAll () to clear, then tileList.addItem () to repopulate the tileList. My guess is that this is not actually unload SWFs completely so that they are piling up in memory. What should I do to unload SWFs completely to prevent any slowing down?

  You must use the DataProvider of TileList property to method removeAll() access as: myTileList.dataProvider.removeAll (), refer to this document http://www.adobe.com/devnet/flash/quickstart/tilelist_component_as3/

• Preloader base for several sovereign wealth funds?

  I watched 100 + discussions on the web, not one right answer.

  I want an AS3 equivalent script for the following script (that I made):

  loadallthefollowingswfs.intocache ("home.swf", "products.swf", "contact.swf");

  I want a bunch of different SWFs, which are all in the same directory, be loaded into the cache before the display of the FSV.

  I want to put this text in the first image of an index.swf

  When it loads ALL SWFs in the cache, it will move on to frame 2 of the index.swf and keep moving.

  All other discussions about the State of the web is "have each loading of swf when it is open" (I won't want them all preload them in the cache before display anyone of sovereign wealth funds), or the so-called discussions "you should all FLAS combine in a single fla and preload just a swf file (I don't want to be I want to separate fla/swf files).»

  Anyone have any suggestions on how to load several SWF files into the cache when you access an image from a swf?

  Thank you.

  This should be the number instead of uint.

  and there should not be spaces in getNextHighestDepth()

• How a pdf manages several sovereign wealth funds during execution?

  If a pdf document contains several sovereign wealth funds, which get turned on and off several times, made each a series in its own instance of Flash Player?

  If not, can they run separately without problem?

  Can we SWF work for awhile and then another SWF run, followed by a return to the first SWF back to halfway through or it starts it Framework 1 again?

  By enabling a Rich Media Annotation, it forms a new instance of sandbox for the execution of the public Service, so you can have several active RMA simultaneously without too much trouble (except things like steal the focus from the other). They see each and other libraries and you can not share data directly with each other as the LSO is deactivated, but base-as a string data can be sent through tunnel via AcroJS If you know what you're doing.

  When an RMA number off, everything is cleared - Acrobat / Reader not automatically store any "data resume" but you can create a traditional recovery system by encoding the SWF to export/import status information for the PDF file. You need to ensure everything needed to "take back" is placed in the State of string data, then read and analyze whenever the SWF loads. Again, this data packet is not visible to other content.

• Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  Original title: System reports the NIC does not properly

  Using Vista Home premium on HP pavillion m8075a model RZ555AA-ABG. Norton network adapter "Microsoft ISATAP map2" diagnostic reports works do not correctly-could not load the required device driver (code 31)

  As none of the problems are met with connection network, do I ignore this warning or try to update the driver?

  Hi eucalyptussurfer,

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  Please see the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could not load the webapp in deployment

  Hi guys,.
  I'm trying to deploy my adf application.but get this bug.any idea what I am doing wrong.

  [18: 30:38] cannot determine the platform target profile.  Using default

  [18: 30:38]-deployment began.  ----

  [18: 30:38] the target platform's (Weblogic 10.3).

  [18: 30:41] recovery of the existing application information

  [18: 30:41] analysis of the dependence running...

  [18: 30:41] building...

  [18: 30:49] deployment 2 profiles...

  [18: 30:49] wrote on the Web for C:\Users\Fusion\Desktop\demoApp - Copy6\ViewController\deploy\demoApp_Project1_webapp.war application Module

  [18: 30:51] wrote the Module Enterprise Application-C:\Users\Fusion\Desktop\demoApp - Copy6\deploy\demoApp_Project1_demoApp.ear

  [18: 30:52] Application deployment...

  [18: 31:06] [Deployer: 149191] Operation "deploy" on demand "demoApp_Project1_demoApp" boot on 'WLS_FORMS '.

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "WLS_REPORTS".

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : [Deployer: 149145] failed to contact "WLS_REPORTS". Deployment is delayed until 'WLS_REPORTS' becomes available. ; nested exception is:

  java.rmi.UnknownHostException: could not discover the URL of administration for the server 'WLS_REPORTS '.

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "AdminServer.

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] [Deployer: 149193] Operation "deploy" on demand "demoApp_Project1_demoApp" failed on "WLS_FORMS".

  [18:31:15] [Deployer: 149034] an exception has occurred for task [Deployer: 149026] deploy demoApp_Project1_demoApp on WLS_REPORTS, AdminServer, WLS_FORMS. : could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] WebLogic Server Exception: weblogic.application.ModuleException: could not load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] caused by: java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet

  [18:31:15] check the server logs or the console of the server for more details.

  [18:31:15] weblogic.application.ModuleException: failed to load the webapp: 'demoApp-ViewController-context-root ".

  [18:31:15] undeployment.

  [18:31:15] - incomplete deployment.

  [18:31:15] remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

  Thank you

  Raul

  User, please tell us your jdev version!

  It seems that you have not installed the adf runtime for your version on the server you are trying to deploy.

  Timo

• Works well in the preview of Flash, but not when the server!

  OK my Flash animation tests and works well on I publish Preview in Flash, but when I upload it to the server it does not work as it is supposed to. is there a way to debug or trace what happens while it is running?

  Details:

  I have 113 tcname_1 of dynamic text-> tcname_113 field names

  I have 113 buttons named button_1-> button_113

  The dynamic text boxes get their data to a file named trees1.txt

  I tried to change three of the text boxes to use device fonts, but has not made a difference

  Here is my code AC3:

  Links button: all the buttons to open in iframe "tdes.

  link en button number

  I have 113 buttons.

  for (var i: int = 1; i < = 130; i ++) {}

  {if (this ["button_" + i])}

  This ["button_" + i] .addEventListener (MouseEvent.Click, f);

  }

  }

  function f(e:MouseEvent):void {}

  var n: String = e.currentTarget.name.split ("_") [1];

  navigateToURL (new URLRequest("ranch.php?id="+n), "tdes");

  }

  end of the links button

  Create the instance of URLLOader

  var myLoader:URLLoader = new URLLoader()

  the data will come as URL-encoded variables

  myLoader.dataFormat = pouvez

  Load using a URLRequest, same local beeing

  myLoader.load (new URLRequest ("trees1.txt"))

  listener onLoad handler

  myLoader.addEventListener (Event.COMPLETE, onDataLoad)

  Error handling

  myLoader.addEventListener (IOErrorEvent.IO_ERROR, onIOError)

  myLoader.addEventListener (SecurityErrorEvent.SECURITY_ERROR, onSecurityError)

  Could be an error or a message

  myLoader.addEventListener (HTTPStatusEvent.HTTP_STATUS, onHTTPStatus)

  Add a listener for the complete event

  function onDataLoad(evt:Event) {}

  trace (evt. Target.Data.cant);

  for (var i: uint = 1; i < evt.target.data.cant; i ++) {}

  This ["tcname_" + i] .text = evt.target.data ["tcname_" + i]

  This ["tcname_" + i] .visible = false;

  This ["button_" + i] .addEventListener (MouseEvent.ROLL_OVER, buttonover);

  This ["button_" + i] .addEventListener (MouseEvent.ROLL_OUT, buttonout);

  trace (i);

  }

  }

  ON working CAPITAL make the visible text field and change color

  function buttonover(e:Event) {}

  var tf:TextField = TextField (this ["tcname_" + e.currentTarget.name.split ("_") [1]]);

  trace (tf.name);

  TF. Visible = true;

  tf.textColor = 0xff0000;

  }

  MAKE working capital change color and make invisible

  function buttonout(e:Event) {}

  var tf:TextField = TextField (this ["tcname_" + e.currentTarget.name.split ("_") [1]]);

  tf.textColor = 0 x 000000;

  TF. Visible = false;

  }

  reminders of the error

  function onIOError(evt:IOErrorEvent) {}

  trace ("IOError:" + evt.text)

  }

  function onHTTPStatus(evt:HTTPStatusEvent) {}

  trace ("HTTPStatus:" + evt.status)

  }

  function onSecurityError(evt:SecurityErrorEvent) {}

  trace ("SecurityError:" + evt.text)

  }

  again is it works fine when publish Preview in Flash, but not on the server. the text does not show the server when I hover over the buttons!

  You can see that to:

  www.myblueranch.com/index2.html

  Do you notice something that I did wrong? is it possible to debug while on the server?

  Thank you very much.

  Layth

  When I see her in IE8 and Firefox 3.6.8 I see text, although in Firefox the text sometimes does not appear.  But I attribute not this program does not, but even more to what appears to be insufficiently size textfields.  What you need to do is set the property to autoSize to the textfields.

  I created a movieclip that contains the button and the textfield and use that instead of 113 separate instances of both.

  In all cases, you should be able to get the Flash debug player so that you can see this error occur during playback in the browser (http://www.adobe.com/support/flashplayer/downloads.html).  Although you won't find may not be any errors, fair textfields that are not the big enugh to display their text.