SP 420CDT - card PCMCIA and Win98

Hello

Don't know if anyone can help me, I recently bought a Satalite Pro 420CDT second hand with a fresh install of Win 98 SE.

Win 98 recognizes that the PCMCIA ports are there and it says there are no conflicts but does not recognize the card when I insert it (I try to use a USB card with her to get USB ports).

If anyone can help... Please

Thank you

Philip.

Hello

It's an old unit and only I can tell you is to check the BIOS settings. Press the ESC key while the laptop starts.

at the second site of the bios is a PCMCIA card from point. Please change this setting

Tags: Toshiba

Similar Questions

  • Card PCMCIA and R500 - is it possible?

    Hello. I am considering buying TP R500. But I am unable to confirm that the R500 is able to use PCMCIA cards (is there or is there not PCMCIA slot?) Some sources say yes, just a few steps. Thanks for the reply.

    If you look at the current image of the R500, you can see that there is an ejector marked with x and another marked dot, the x represents the expresscard Bay, while the point means the Bay of PCMCIA card.

    Zoom in a bit if you don't see it.

    http://www.NotebookReview.com/picture.asp?f=36720

    It is also confirmed by the reveiwer there the PCMCIA card with ExpressCard slot.

    I think R400 took away the PCMCIA card slot, but not the R500

  • (S2800-400) Card PCMCIA USB 2.0 problem

    Well, recently I bought this ST Labs USB 2.0 card for my laptop. When I tried to install the drivers I just got a blue screen when the pilots was almost innstalled. It was on Win XP, I got the advice of a friend to change my OS for Win 2000, I did that, but then the pilot innstaller has said that there is something wrong with the device, press Finish to open help.
    I did what troubleshooting said, except that the device was not in the Device Manager to all (Win 2000)

    Some help would be great :-)

    Hi, Lars

    One of my friends uses USB 2.0 PCMCIA card with two USB ports and it has no problem. How have you installed new hardware? You first install driver and after that insert card PCMCIA or you did the opposite?

    Is there any kind of instruction how to do it? It's perhaps better first of all install the correct driver and then restart the computer to insert the PCMCIA card.

  • My 420CDS Sat Pro accepts cards PCMCIA 32 bit?

    I would like to know if my labtop 420CDS accept PCMCIA 32 bit (cardbus)? Thank you very much

    Hello

    I found an interesting page, and it is of course possible to use cards PCMCIA 32 bit with your device.
    http://www.sparepartswarehouse.com/Toshiba, Satellite-Pro 420CDS, Laptop, Partslist.aspx

    Also check the BIOS settings. Maybe is it possible to set this option.

  • Problem with card PCMCIA-GPIB

    I have trouble getting a PCMCIA-GPIB to work.

    Background:

    This card works with another laptop that is identical, but a little older (~ 1 year). Two laptops have the image of an operating system of the same company, so they should be identical software-wise. They are two laptops running 32 - bit XP SP3 Dell. The two have identical nor is versions installed, except for the laptop that the card works on, which has installed LabWindows/CVI 5.5 (the other was the last CVI runtimes installed).

    What I did:

    1. install the latest drivers from NOR-488. 2 (2.8, of http://joule.ni.com/nidu/cds/view/p/id/2129/lang/en), restart.

    2. install the latest runtime LabWindows/CVI (2009 SP1, of http://joule.ni.com/nidu/cds/view/p/id/2072/lang/en), restart.

    (3 install last NI-VISA runtime http://joule.ni.com/nidu/cds/view/p/id/2186/lang/en(5.0.2,), restart.

    4. plug the PCMCIA card.

    5. check the Windows Device Manager indicates the GPIB card and doesn't show any problem with the device.

    6 open Measurement & Automation, select card PCMCIA-GPIB from interfaces, click "Scan for Instruments.

    When I do this, M & A is blocked. When I run the troubleshooter on the interface card, it fails, and the "Help" button which brings me to a page about the conflicts of resources. Device Manager shows no conflicts. When I try to scan for Auditors using RPIC, I get the error 'EDRV', and it crashes.

    What I tried:

    1 reinstall the software OR

    2 disassembly/insert the card in the laptop

    3 uninstall the card from Device Manager

    4 restart the laptop

    5 put the card in the old laptop (still at work)

    Can anyone suggest anything to try? It is vital that we get this card works with the second laptop.

    Thank you

    Carson

    Hello Carson,

    I find this other post talks about a similar problem to you. It gives steps on how to get it operational. I would like to know if that works for you.

    Best regards

    Adam G

  • Lets say I got a $10 gift card balance and I want to buy something will be only charged debit card 10 cause of $20 s $ of the balance of the gift card?

    Lets say I got a $10 gift card balance and I want to buy something will be only charged debit card 10 cause of $20 s $ of the balance of the gift card?

    Unless it's a gift card or otherwise indicated, the debit card will be charged $10 plus tax on this item.

    (143858)

  • My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

    On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

    System information:

    Model name: MacBook Pro

    Model identifier: MacBookPro11, 1

    Processor name: Intel Core i5

    Processor speed: 2.6 GHz

    Number of processors: 1

    Total number of cores: 2

    (By heart) L2 Cache: 256 KB

    L3 Cache: 3 MB

    Memory: 8 GB

    Boot ROM Version: MBP111.0138.B17

    : 2.16f68 SCM Version (system)

    USB:

    USB 3.0 Bus:

    Host Controller Driver: AppleUSBXHCILPT

    PCI Device ID:0x9c31

    PCI revision ID:0 x 0004

    The seller ID:0 x 8086 PCI

    Mass storage device:

    Product ID:0 x 1000

    Provider ID:0 8564 x

    Version: 11 h 00

    Serial number: 45H3PTDPV3XSLHKB

    Speed: up to 5 GB/s

    Manufacturer: JetFlash

    Location ID:0 x 14500000 / 9

    Available current (mA): 1800

    Current (mA): 76

    Additional operating current (mA): 0

    Apple keyboard / Trackpad:

    Product ID:0 x 0259

    ID:0x05ac of the seller (Apple Inc.)

    Version: 2.24

    Speed: up to 12 Mb/s

    Manufacturer: Apple Inc..

    Location ID:0 x 14400000 / 2

    Available current (mA): 1000

    Current (mA): 40

    Additional operating current (mA): 0

    Built-In: Yes

    BRCM20702 Hub:

    Product ID:0 x 4500

    Name of the vendor ID:0x0a5c (Broadcom Corp.)

    Version: 1.00

    Speed: up to 12 Mb/s

    Manufacturer: Apple Inc..

    Location ID:0 x 14300000 / 3

    Available current (mA): 1000

    Current (mA): 94

    Additional operating current (mA): 0

    Built-In: Yes

    Host controller USB Bluetooth:

    Product ID:0 x 8289

    ID:0x05ac of the seller (Apple Inc.)

    Version: 1.18

    Speed: up to 12 Mb/s

    Manufacturer: Apple Inc..

    Location ID:0 x 14330000 / 6

    Available current (mA): 1000

    Current (mA): 0

    Additional operating current (mA): 0

    Built-In: Yes

    Software:

    Presentation of the system software:

    System Version: OS X 10.11.5 (15F34)

    Kernel version: Darwin 15.5.0

    Volume: Macintosh HD to startup

    Boot Mode: Normal

    MacBook Pro name: Stuart computer

    User name: Stuart Berwick

    Ensure the virtual memory: enabled

    Integrity of system protection: enabled

    Since the starting time: 6 minutes

    USB 3.0 Bus:

    Manufacturer: Apple Inc..

    Location ID: 0 x 14330000 / 6

    Available current (mA): 1000

    Current (mA): 0

    Additional operating current (mA): 0

    Integrated: Yes

    Model name: MacBook P

    A simple restart of the machine is reset.

    On the hub to try another cable and a different port if possible.

    The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.

  • Upload pictures on sd card pc and import for iPad

    Upload pictures on sd card pc and import for iPad

    you have a question?

  • External Usb Audio Card Popping and cracking sound with Satellite L500

    Greetings,

    My name is Boyan and I am from Bulgaria, and a year ago, I bought a laptop satellite l500 series (I can't tell which is exactly the model at the moment because my computer is not currently with me and my user manual, the only thing that is said is that it is for L505/L500/L500D / L505D.) But from memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal, because I gave him for repairs for the same problem that I say down below)

    The problem with my laptop, is that when I plug in a Usb Audio card in my laptop I have a crackling sound during live sound is played hollow map external speakers/headphones. I tried several sound cards and speakers/headpohnes which work perfectly well with other computers, including laptops, but the problem continues even when I use an external sound card to connect to the laptop not appearing in my laptop speakers/headphones.

    The problem is important only when the signal passes through an external audio card and it is very disruptive since I use my laptop to create music and I bought a sound card expenssive and speakers that can not be used with the laptop. I tried 3 types of sound cards:

    M-Audio Fast Track Pro

    BEHRINGER uca 222

    and a simple 3d audio usb audio card external and the problem persists.

    At first, I thought that the problem is software and I should install the new drivers, windows 7 automatically recognizes and installs the drivers for the devices and I have its in (but with the cracks and educated) so I tried using the official drivers sold for me with the sound cards, but without success: the problem was still there. I tried to find the new drivers of the sound cards on long official distributors and I downloaded it but the problem was still there. Then I tried to delete all the audio drivers on my computer and just use the external sound card for sound but this eighter helps force. I updated my drivers for my sound card build - in as well but again - no luck.

    After substantial thing frist I did when (2 weeks after I bought the laptop) was to contact the store where I bought my audio card and they said that the problem may be so eighter latency or high voltage of the laptop they advised me to try to reduce the latency of the parameters or to try and see if the problem persists if only my laptop running on battery power. I tried two things, and they did not help. Audio cards worked without problems on all the other computers I tried them but me. So they told me that the problem could not be audio cards.

    What I then was that I gave my laptop for the Distributor official of toshiba in my country so that they can solve my problem. What they told me, is that a problem with the version of windows which was preinstalled on my laptop and it was not compitable with the sound cards (which was bizzar survey because I tried them on the same windows and they worked, only on other computers). So I'm back from my laptop and passed under my Windows 7 Home Premium 64 bit operating system to Windows 7 Ultimate edition 64-bit and Windows 7 32-bit Ultimate edition on all versions, that's the problem: whenever I activate a low of passes of audio signal and Audio Usb card he heard cracks and educated. I even tried isntalling Windows XP, but the laptop want spesific SATA drivers for the Windows XP installation which although I found - they helped me install XP and I didn't go the BIOS of the computer to try to put a new and so on, because I'm not sure about that and I could lose my warranty so I said in the official repair shop for Toshiba in my city to put XP on my computer to solve the problem but they can't because they are not liscened to work with software that isn't a recipt for its purchase (which I did not because I bought my windows xp a long time ago and I lost the recipt)

    I gave her to get it repaired for the second time by telling them that the change of my operating system has not solved my problem and what they were doing was they changed the motherboard on my computer, indicating that the build in the device realtek audio on my computer is good enough to support a card usb audio or it may be broken and they change the whole motherboard because the generation of card is stuck, so they did it, but my problem has not been resolved. They told me that although I use and map external audio usb signal always going trough my only internal and I have to disable so I tried to disable this trough Control Panel, but this does not solve the problem and I don't have a BIOS option to disable my sound card build-in. Another thing I thought that maybe the problem is that two audio cards do not work on the same bitrate and Hertz so I put both cards to 16 bit 48000 Hz DVD quality (also tried the other options on the 3 cards that I have) but it's the same thing.

    They told me that it's just my luck and the construction of the sound card does not support this external sound cards and I would had been more careful when they choose to my laptop first.

    I couldn't accept this awnser for several reasons:

    (1) this sound card works on a lower version of windows and are supported by many older models of Realtek and a lot of old computers (one of them bought 2000! and my laptop is of 2010!)

    (2) the guys who were the apperantley of fixing problem don't go so deeply into my problem because they didn't know that in fact the problem was that only they knew that there is a problem with the audio card and the computer interact with them, they knew not that it cracks during the direct play the external audio card.

    (3) I can't accept the fact that Toshiba is manufacturing of models with maps audio chipset that cannot support a simple external Usb Audio card. It is totally unacceptable to me, and I sincerely hope that this is not the case!

    (4) they have tried my audiocards on another laptop of the same series, claiming that they have not at their dispossal at the moment so I'll go tomorrow at a local store and try the sound cards by myself on the same computer in the store.

    What I have now, it was that I gave my laptop for repair requesting a statement of the problem in wrtting with details of the problem so I can go to court or ask for a new laptop, but I'll be charged with little money because according to them there is no problem in the laptop and the problem is that my external sound cards are not compitable with the build in house chipset sound card. If I give my laptop for repair, and there is no hardware problem, I'll have to pay the money. I will do this, but I'm now crazy, because that does not solve my problem and I am wasting time and money.

    What I ask here is, if you can not help me solve my problem and advice me what to do to fix it, please give me the details of the chipset built in Driver sound card on my motherboard, so I can check if it is compitable with my external sound cards and contact the dealers of the sound card to ask them their opinion. Or if you can tell me what it is compitable with and what not, that would be great. Personally, I think this laptop should have no problem at all with a simple external usb running sound card, but I ask you, if you know something more about it.

    If a problem with the build in chipset then Toshiba is manufacturing (or at least sell) audiocards which are not in a normal standart but unfortunately I can not do nothing except complain to Toshiba and never treat whith such productgs more. Otherwise, if this is not true, then my laptop has a problem that is different and I have to go to court with the mans for mounting repair is not my laptop or do not give a new one when I guarantee will not fault of Toshiba and it will be in a way solve my problem.

    I hope that you understand how important it is for me and I hope I have fix the problem as soon as possible.

    P.S

    I want to say that I am familiar with grammar mistakes, that I did in the text below, and I would ask your excuses that I'm not a native speaker of English.

    Hi, I would just say that I had a similar failure although I wouldn't be surprised if she causing of yours, but you never have knowledge, my fault was the lid of my laptop [9 months], it contains the mic and when the lid has been in a certain angle cracks could be heard worse when I got my external sound card all the time it happened, luck, PS, it's a defective membrane [lid to the body] easily missed by engineer because he was the same angle you English is very good

    Post edited by: sido1

  • Card PCMCIA Satellite S1800 CAP is missing

    Help, please!
    After the purchase of a used Satellite S1800-314 (it works well), I wanted to connect into my card PCMCIA network RJ 45. But this was not possible. On the outside, it looks OK, but there is no cap on the inside.
    So please, what should I do to make this work?

    you mean that there are no pins inside? You can get it fixed if you want, but ask first in the store where you bought the lappie, what happened to the pins.

  • Pomp A100-773 and WIN 7: card reader and access keys Fn does not

    Hello
    I hope that this question did not arise 100 times before. (I have not found an answer in this forum)

    Problem:
    Card reader and FN keys do not work, where can I get drivers?

    I installed Win 7 Pro on my laptop Satellite A100-773. Everything works great and Win 7 has all the drivers installed, but the card reader and FN keys do not work.
    On the support home page is not oder pilot anything for this laptop with Win 7.

    Can someone help me with this?

    Tahnks.

    PS: it was not the version upgrade of the United Nations.

    Hi all,

    by now, I tried the extra package toshiba for model serveral for win 7 and vista, but before the installation there is an error.
    the card reader is now working with the card reader for win vista driver.

    Doesn't anyone know how to solve this problem?

  • Satellite A200 and Win7 64 bit - card reader and touchpad drivers needed

    Hello, I got a Toshiba laptop-

    Satellite A200-1QZ
    Weight: PSAE6E-07700HGR

    Now I install Windows 7 64 bit - after the installation of the card reader and mouse pad apps are on order!
    I used the list of all the drivers - for 32-bit vista compatibility and so on, but the pieces do not work!

    Please gave me a quick response if I get the system still running!

    Thank you for the Germany
    Steven

    I ve checked the Toshiba download page, and as I can see, your laptop model is not supported for Win7 64 bit. It is supported for 32-bit only. So please can you us the drivers you are using for 64 bit OS?

  • Vista on Qosmio F20: SD card reader and Media Player keys do not work

    I recently updated my Qosmio F20 for Vista.
    I got most of the job functions, but my SD card reader and fixed keys for media player still haven't.

    I can't find the drivers for them (I don't think they exist for a F20) so I was wondering if anyone had a solution.

    Thank you

    Hi faarn

    You can't find the Vista drivers as Vista don t drivers is on the page of Toshiba. Some people have posted a link to the official document on the units of Vista support and the Qosmio G and F20 was not on the list.

    But another clue. Check the drivers in another series as F30 or G30. But the chances are small that the pilots will run

  • I can't download anything in the App Store, I can not still to update anything without entering my card info and he says "he has a problem of billing with a previous purchase.

    I can't download anything in the App Store, I can not still to update anything without entering my card info and he says "he has a problem of billing with a previous purchase.

    There is something probably wrong with your credit card you enter. Check your previous purchases and know what the problem was. If it does not call apple for more information support. Good luck

  • Equium M40X: Need XP drivers for card reader and Lan

    I reinstalled xp on my laptop and came on the Toshiba site for drivers, but I can't find a card reader and the LAN does not seem to work.

    Any ideas where I can find these drivers.

    Hello

    The European driver Toshiba page provides all the necessary XP drivers for Satellite M40X.
    I found the driver v 1.0.3.1 Cardbus and the Realtek LAN driver v5.612.628.2004 for XP.
    So I really don't understand why you are not able to find these two XP drivers.

    They are there.

Maybe you are looking for

  • Satellite A200-1yo restarts from the drive with the CD player.

    Hello Can anyone advise me on my laptop Satellite A200-1yo. I am currently rebuildingy laptop and I'm going to put the laptop on the screen is black and do give an opition to press any key to start the reconstruction. He wrote but do want to rebot th

  • Installation of new drives in a raid configuration

    I use a mr10i and two drives RAID 1 raid controller. I'll add an additionall two disks to the raid level 1. What I need to know is: can I add the second set without having to completely erase the first two and set up a new configuration of raid.

  • Query < CLOSED > bike E Lollipop

    I bought the e bike from flipkart... Very good phone. But what e bike will be updated to Android lollipop 5.0.1? Anyone know? Thank you

  • Why can I not open an .xps file

    Downloaded or recorded files are converted to a file format ending with .xps, define properties such as an XPS document.  WWhy I'm unable to open these files?

  • Mobile Data Protection sensor driver?

    Hello.I use XP pro on HP 4520 s computer laptop but (HP Mobile Data Protection sensor) recognized by windows update when I put driver using Internet research in Device Manager.can I download standalone package (offline) of Microsoft because its not a