SP A10 - Error 633: the modem is not installed or configured for Dial-Up
I've already reformatted the hard drive and the utility CD to reinstall the modem driver. Anyone got tips on how to solve the problem? An external modem would solve it?
Either way, it's a satellite pro A10
Hello
If the HARD drive is formatted, use the recovery CD and reinstall the OS. After that, the modem must be recognized and properly installed. After that, configure Dial connection and check the modem. If the modem is not defective, it should work.
The strange thing is that there is Error 633 which means: the port is already in use or is not configured for remote access remote calls.
Please check this interesting site http://www.modemsite.com/56k/duns633.asp.
If there is no success please write again.
Good bye
Tags: Toshiba
Similar Questions
-
I had the teacher edition, but never received an email with the details of the product, etc. and the products are not installed (they ask for product key, etc)... What are you doing?
Hello
did you purchase your product of these companies like Amazon? If Yes, this isn't a serial number, only a code with which you can request a serial number from Adobe. Please take a look at http://helpx.adobe.com/x-productkb/global/find-serial-number.html. (Start here: How did you purchase your product?)
The next part, so I don't see at the very least, ceased to exist on my Adobe website, everything happens in the link above. I leave as an info yet, he could still fit for you. For this purpose, please click your way through your Adobe Store and find the button "get serial number". Fill in the form and after awhile, you will get the real serial number.
Hans-Günter
-
Qosmio F10 - driver of sound and the modem does not install
Hi all.
Firstly, my computer is 100% up-to-date. I recently had to do a complete reinstall of my OS
I got all my drivers and what not, install, but the driver sound max and the modem driver will not install.For the modem, it asks if I want to install it, I click Yes and it starts the installation and then he finshes and nothing comes. It is not installed.
I then try my sound, and it seems as if it will install, but then I get an error that says: no driver is found, please reboot your computer.Or something around those lines anyway.
Can someone help me please?
Hi, have u tried in safe mode. Why do not you download the latest drivers? You can try this site http://driverscollection.com/?H=Qosmio%20F10&By=Toshiba
-
I have Microsoft Vista Home Premium edition. I use the data card (broadband +, model - HUAWEI EC1262) to connect to the internet.
I get error 633 whenever I try to use the data card to connect to the internet on my laptop. He says that "the modem (or other connecting device) is already in use or is not configured properly" and preventing me from accessing Internet.I tried with a different brand of card data, but still getting same error. Map data even works on another laptop with Win7.
I did all the options like:
1 uninstall and reinstall modem drivers
2. release the COM port and the new port assigngWe always get but same error. Any solution for this problem would make.
Have you tried system restore? If you can restore the system to the date where it worked fine maybe it will work.
-
Error 633: The Modem already in use or not configured properly
Hello
I use a Windows7 Home Premium 64 bit PC.
When I am trying to connect to the internet via 3 g USB modem, I get error 633: Modem is in use or not properly configured.
The software and drivers have been installed correctly. I uninstalled and re installed several times without success. I tried the same thing in safe mode without success.Any help is appreciated.
Thank youHello
I suggest you to check if the modem is compatible with Windows 7.
Check out the link:
Windows 7 Compatibility Center:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
I would also recommend to connect the modem to a different computer and check if it detects there. If it does not work on another computer also, then the problem is with the modem and I would ask you to contact the manufacturer of the modem for any further assistance.
-
While I am connected to internet using Reliance Netconnect Huawei 1260, the connection disconnects after 10 to 15 minutes. Shows as connected Netconnect but does not work. I try to disconnect the connection, but it gives an error.
Reconnect to always remove the modem and then re - login again.
Please provede me a permanent solution to this. I use Windows 7 Enterprise
Hello
1. If it works well before?
2. what version of Modem drivers do you use? Do you have any other device connected to the computer?
First of all, I suggest you to check if the modem is compatible with Windows 7.
Check out the link:
Windows 7 Compatibility Center:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
I would also recommend to connect the modem to a different computer and check if it detects there. If it does not work on another computer also, then the problem is with the modem and I would ask you to contact the manufacturer of the modem for any further assistance.
Error 633 indicates that the port is already in use or is not configured for remote access dial out. You may need to check if the VPN and the connection connection try to use the same port that is causing the problem. You may need to check the settings of the modem and change the port for your needs.
To work around this problem, use one of the following methods:
Method 1:
Reserves explicitly the TCP port that is used for the VPN connection. To do this, follow these steps:
a. click Start, click run, type regedit.exe in the Open box and then click OK.
b. in the registry editor, find and then click the following registry subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters
(c) in the Edit menu, point tonewand then click multi-string value.
d. rename the multi-string value as 'ReservedPorts' and then double-clickReservedPorts.
e. in the value data box, type1723-1723, and then click OK.
f. exit the registry editor.
Registry warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/
.
Method 2:
Use the netstat command to find the program that is using port 1723. Then, end the process for this program. To do this, follow these steps:
a. click Start, click run, type cmd.exe in the Open box and then click OK.
b. at the command prompt, type the following command and press ENTER:
NETSTAT - aon
c. in the result which appears, identify the process ID for the program, if any, who is using the TCP port 1723.
d. at the command prompt, type the following command and press ENTER:taskkill/pid PID/f
Note: The taskkill command terminates the process that corresponds to the ID of the process. The/F option is used forcefully to complete the process.
e. at the command prompt, typeexitand press ENTER to quit the command prompt.
Restart your computer. This may cause the program that uses the TCP 1723 port to use a different port.
I hope that helps!
-
Vista Basic with dial-up. I reinstalled vista and now the modem will not work with any of the numbers given by my provider. He throws error numbers (Sorry didn't write them) and said that the modem is already current usage or other computer is busy. The modem does not appear in the lists of material and reinstallation does not work. The computer does not recognize when a new modem is installed either. I use the same drivers provided with the computer when I got it.
Hello
I suggest to refer to this link and follow the instructions in the link below and check, if this can help:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-modem-problems
It will be useful.
-
Want 4500: Connection error! The printer could not connect to the server
Connection error! The printer could not connect to the server!
Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!
I am successfully connected to my router and can print from my pc and my ipad with airprint.
PC "will not find"the printer either for purposes of updating
What I need to change the DNS. If so, I don't know what it is or how to do it!
I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.
Can anyone help?
Very frustrated customer :-(
Hi @roopuk,
Thanks for getting back to me.
Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users. Try the same steps as described above, but this time use the following parameters:
Manual preferred DNS Server: 209.244.0.3
Auxiliary manual DNS server: 209.244.0.4If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.
What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services. In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server. HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.
Here is the information that you need for your provider service to open ports on your router/modem...
-Multicast must be enabled
-Hello enabled for AirPrint (relevant for iOS and Mac OS users)
-Mac filtering should be disabled
-Also, make sure that your router's firmware to date if
necessary
- The dmz on the router mode and turn it on to the printers IP address: _Ports to open are: Eprint and Apps
Incoming Ports.
UDP
80
443
------------------
Outbound portsTCP
5222
5223
-------------------
Once they are open, you should have no problems connecting to services web eprint on your device.I would like to know how it works for you.
Kind regards
-
My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n
A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.
Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.
-
I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
Thanks for the helpThis problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).
You need to install the missing components (for example, Redistrbutable end 2005 ++).
- [908165/questions/908165] The URL is not valid and cannot be loaded
- bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll
-
upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found
Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.
TT2
-
Original title: Dell Inspiron 1501 with Windows XP Media Edition drive d / error/defect of the decoder.
After download of Internet Explorer 8 I now get a decoder error when you insert a DVD and Media Center. The message says 'malfunction of the decoder or not installed' and suggests to restart the computer and Media Center. This does not solve the problem. The drive is identified as Philips SDVD8820. What can I do to fix this?
Hi Don,
You can download and run the Microsoft Windows XP Video Decoder Checkup Utility . This utility will help you determine if an MPEG-2 video decoder, or a DVD decoder is installed on your system and if the decoder is compatible with Windows Media Player 10 and Windows XP Media Center Edition 2005.
Hope the helps of information.
-
Had this feature Sharper Image 5 days weather for Christmas and of course we have over-paid for her-$50 bed bath & beyond. I'm not as technical as most of you, but I am unable to even get the software to install. I get an application error installation "the application could not initialize properly (Oxc0000135). Click on OK to terminate the application. "I got the Version 1.01 in the box (and it does not say is the app forecast 4 days) and am running XP. Thanks in advance for any help - of course, the is Helpline is to give an ambiguous 'we are closed for the holidays' without parameters for the last seven days... Grrr...
Sure that the error occurs when you don't have a .NET framework is installed on your system. You can download/install here: http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=26
-
Windows xp tells me that my modem is not installed properly.and is the title of the dialog box. Slcpappl? I have xp pro sp3 8.
original title: anbody know what ' slcpappl ' alluded?
Hello
1 how long have you been faced with this problem?
2 have you made changes on the computer before this problem?
3. What is the exact message in the dialog box?Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
Suggestions for a question on the help forums
http://support.Microsoft.com/kb/555375 -
Error 1222: The network is not present or not started
I have a home network with two computers. I've implemented such that file, internet and printer shares, a set-up that has worked well for a while. All of a sudden, I could not access the computer on which the printer is connected to everything. This computer, however, was still able to access the internet, but not able to access its own location on the computer network. I ran the Diagnostics of the network and the convenience of homegroup without result. I discovered that the Server service is not running and tried to start, but rather, I got the error "Windows could not start the Server service on Local computer. Error 1222: the network is not present or not started. "LAN diagnostics donnГ not answers. After the Server service does not, I cannot share files or printer, but can somehow get internet to share.
Help, please. Thank you
Hello
Maybe this can help, http://support.microsoft.com/kb/170336
Jack-MVP Windows Networking. WWW.EZLAN.NET
Maybe you are looking for
-
turn off for reasons of sacurity
Hi my iphone is disable when I recived you can new version 9.3.1
-
Y410 Ubuntu 10.4 and Huwaei E153 hsdpa usb modem
Hello IM using lenovo y410 with ubuntu 10.04. I bought the new Huwaei E153 hsdpa usb modem. But it shows as usb storage device. I can't install to use it as modem hsdpa. Please ask me... How to install this modem. Thank you
-
Don't the 7 Slate more has a construction of the hygrometer and if by chance will be HP of output or has a tablet with sensor hygrometer?
-
I "sorry - East (my mind) gateway router?"
I ' live in Russia and my router - DIR-300 programming ISP, reboot to step 6!
-
Hi, my dreamweaver use language is Turkish but I want to change to English, but how, please help me?