SPA 122 and NEC pbx: incoming call problem

Hello
I signed a SPA122 on a NEC SV8100 pbx; the device is correctly recorded and can make outgoing calls, but it cannot receive calls...
The appellant receives a busy tone when SPA phone number calls.
If I register a CISCO IP Phone 303 the same pbx and using the same SIP account, the phone receives calls correctly, so I guess it's a SPA122 problem and is not a problem of pbx...
Attached a trace of Wireshark and the SPA122 configuration file.
Can someone help me please?
Kind regards
GIanni

Advertisement

I connect non sono di lettura delivery easy. Vedo UN

SP_GET_CALLING_PARTY_NUMBER:FAULT

My it could avere un meaning che non me lo spiego.

Ho riconfrontato I messaggi di uno SPA303 con lo SPA122:

SPA303_OK

Status line: SIP/2.0 180 ringing

Message header

To: 93 >. tag =d1be0d61d79b398bi0

From: "GIANNI" tag =40503246313536410000533 B

Call ID: 020289DCC781400000000004@192.168.177.160

CSeq: 1 INVITE

Via: SIP/2.0/UDP 192.168.177.160:5070; branch =z9hG4bK8865B851F1A24846

Contact: "226" 93:5060 >

Server: Cisco /SPA303 - 7.4.9c

Content-Length: 0

SPA122_KO

Status line: SIP/2.0 180 ringing

Message header

To: 187 >. tag =e2fa676e9ab1a8efi0

From: "GIANNI" tag =D94932463135364100027C20

Call ID: 02028A28628140000000000C@192.168.177.160

CSeq: 1 INVITE

Via: SIP/2.0/UDP 192.168.177.160:5070; branch =z9hG4bK9F3760FE2A28B38B

Contact: "226" 187:5060 >

Server: Cisco /SPA122 - 1.0.2 (006)

Content-Length: 0

Oltre ad some differenze ovvie come gli indirizzi IP, it call-id, I tag ed branch he, cambia chiaramente lo agent user name o server name.

No mi che aspect the causa del problema sia questo my tentiamo header. ForSE ha una notazione che non piace al PBX NEC Reed's is ignorarlo.

Try a nulla would not far away:

Nella sezione SIP-> settings SIP cancelliamo i campi SIP User Agent name e name of the SIP server.

Let me know. Grazie.

Tags: Cisco Support

Similar Questions

  • External incoming calls problem.

    Hello everyone,

    One of our voice gateway router has problem in there. It is malfunctioning and cannot receive incoming call. I think that call is hitting our router and our router is down.

    It is a BRI ISDN router with 2 Numéris coming. In the Manager of CCM, it is added as an MGCP gateway, but there his own so dial peer configurations. I checked and it does not any config Manager of CCM.

    Here is the debug isdn q931 to.

    ISDN Q931 BR0/1/1: RX<- setup="" pd="8 " callref="">
    Complete package
    Carrying capacity I = 0x8090A3
    Standard = CCITT
    Ability to transfer = speech
    Circuit transfer mode
    Transfer rate = 64 kbit/s
    The channel ID I = 0 x 89
    Exclusive, B1
    Called number i = 0 x 81, '510859'
    Plan: ISDN, Type: unknown
    16:51:19: ISDN Q931 BR0/1/1: RX<- setup="" pd="8 " callref="">
    Complete package
    Carrying capacity I = 0x8090A3
    Standard = CCITT
    Ability to transfer = speech
    Circuit transfer mode
    Transfer rate = 64 kbit/s
    The channel ID I = 0 x 89
    Exclusive, B1
    Called number i = 0 x 81, '510859'
    Plan: ISDN, Type: unknown
    16:51:23: ISDN Q931 BR0/1/1: RX<- disconnect="" pd="8 " callref="">
    Because I = 0x82E6 - recovery at the end of the timer
    16:51:23: ISDN Q931 BR0/1/1: TX-> the RELEASE_COMP pd = callref 8 = 0 x 81
    Because I = 0x80D1 - reference value of appeal not valid

    I also receive a warning message on the map of the voice that is

    voice-card 0
    ! Caveat! 1 DSP at location 0 using firmware by default camera flash:
    ! It is not recommended, the default IOS version is 24.3.0
    DSP services dspfarm

    Also see the following output to see the dsp voice detailed command

    EDSP 0001 01 g729r8 IDLE 50/0/1.1 0.1 p
    EDSP 01 0002 g729r8 p 0.1 IDLE 50/0/2.1
    EDSP 01 0003 g729r8 p 0.1 IDLE 50/0/3.1
    EDSP 0004 01 g729r8 p 0.1 IDLE 50/0/4.1
    EDSP 01 0005 g729r8 p 0.1 IDLE 50/0/5.1
    EDSP 01 0006 g729r8 p 0.1 IDLE 50/0/6.1
    EDSP 0007 01 g729r8 IDLE 50/0/7.1 0.1 p
    EDSP 0008 01 g729r8 0.1 IDLE 50/0/8.1 p
    EDSP 01 0009 g729r8 p IDLE 50/0/9.1 0.1
    EDSP 0010 01 g729r8 p 0.1 INACTIVE 50/0/10.1
    EDSP 0011 01 g729r8 p 0.1 INACTIVE 50/0/11.1
    EDSP 0012 01 g729r8 p 0.1 INACTIVE 50/0/12.1
    EDSP 0013 01 g729r8 p 0.1 INACTIVE 50/0/13.1
    EDSP 0014 01 g729r8 p 0.1 INACTIVE 50/0/14.1
    EDSP 0015 01 g729r8 p 0.1 INACTIVE 50/0/15.1
    EDSP 01 0016 g729r8 p 0.1 INACTIVE 50/0/16.1
    EDSP 0017 01 g729r8 p 0.1 INACTIVE 50/0/17.1
    EDSP 0018 01 g729r8 p 0.1 INACTIVE 50/0/18.1
    EDSP 0019 01 g729r8 p 0.1 INACTIVE 50/0/19.1
    EDSP 0020 01 g729r8 p 0.1 INACTIVE 50/0/20.1

    Caveat! 1 DSP at location 0 using firmware by default camera flash:
    It is not recommended, the default IOS version is 24.3.0

    ----------------------------FLEX VOICE CARD 0 ------------------------------
    * DSP CHANNELS VOICE *.

    CURR STATE: inuse (busy) (b-output) busyout (bpend) held in the waiting
    LEGEND: (Bad) download (closed) stop (particles) pending

    DSP DSP DSPWARE CURR BOOT PAK TX/RX
    NUMBER TYPE NUM CH CODEC VERSION STATE RST AI TS ABRT PACK VOICEPORT
    ===== === == ========= ========== ===== ======= === == ========= == ==== ============
    C5510 001 01 no bad 0.0.0 idle 0 0 0 0/0
    C5510 001 02 no bad 0.0.0 idle 0 0 0 0/0
    C5510 03 001 no bad 0.0.0 idle 0 0 0 0/0
    C5510 04 001 no bad 0.0.0 idle 0 0 0 0/0
    C5510 001 05 no bad 0.0.0 idle 0 0 0 0/0
    C5510 001 06 no bad 0.0.0 idle 0 0 0 0/0
    C5510 001 07 no bad 0.0.0 idle 0 0 0 0/0
    C5510 08 001 no bad 0.0.0 idle 0 0 0 0/0
    C5510 01 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 005 02 None 24.3.0 idle idle 0 0 0 0/0
    C5510 03 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 005 04 None 24.3.0 idle idle 0 0 0 0/0
    C5510 05 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 06 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 07 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 08 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 09 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 10 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 11 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 12 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 13 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 14 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 15 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 16 005 None 24.3.0 idle idle 0 0 0 0/0
    C5510 01 006 None 24.3.0 idle idle 0 0 0 0/0
    C5510 02 006 None 24.3.0 idle idle 0 0 0 0/0
    C5510 03 006 None 24.3.0 idle idle 0 0 0 0/0
    C5510 006 04 None 24.3.0 idle idle 0 0 0 0/0
    C5510 006 05 None 24.3.0 idle idle 0 0 0 0/0
    C5510 006 06 None 24.3.0 idle idle 0 0 0 0/0
    C5510 07 006 None 24.3.0 idle idle 0 0 0 0/0
    C5510 08 006 None 24.3.0 idle idle 0 0 0 0/0
    C5510 09 006 None 24.3.0 idle idle 0 0 0 0/0
    C5510 10 006 None 24.3.0 idle idle 0 0 0 0/0
    C5510 006 11 None 24.3.0 idle idle 0 0 0 0/0
    C5510 12 006 None 24.3.0 idle idle 0 0 0 0/0
    C5510 13 006 None 24.3.0 idle idle 0 0 0 0/0
    C5510 14 006 None 24.3.0 idle idle 0 0 0 0/0
    C5510 15 006 None 24.3.0 idle idle 0 0 0 0/0
    C5510 16 006 None 24.3.0 idle idle 0 0 0 0/0
    * DSP SIGNALLING CHANNELS *.
    DSP DSP DSPWARE CURR BOOT PAK TX/RX
    NUMBER TYPE NUM CH CODEC VERSION STATE RST AI TS ABRT PACK VOICEPORT
    ===== === == ========= ========== ===== ======= === == ========= == ==== ============
    -END OF THE MAP OF FLEX - 0 VOTES

    I hope to receive positive feedback from your people. I checked some documents and they said the default dspware to 12.24 t IOS is 24.3.0 which is displayed in the output with other DSP except dsp 1 and if I'm not wrong, it is integrated in the IOS rather then independent because I can't see any file in flash that could be DSPware. Any help will be much appreciated.

    Hello

    You get the dsp error message is because your DSP 1 at location 0 is bad and must be replaced.

    C5510 001 01 no bad 0.0.0 idle 0 0 0 0/0
    C5510 001 02 no bad 0.0.0 idle 0 0 0 0/0
    C5510 03 001 no bad 0.0.0 idle 0 0 0 0/0
    C5510 04 001 no bad 0.0.0 idle 0 0 0 0/0
    C5510 001 05 no bad 0.0.0 idle 0 0 0 0/0
    C5510 001 06 no bad 0.0.0 idle 0 0 0 0/0
    C5510 001 07 no bad 0.0.0 idle 0 0 0 0/0
    C5510 08 001 no bad 0.0.0 idle 0 0 0 0/0

  • Incoming calls problem

    My Xperia M4 double ring does not ring for incoming calls. Speaker works great when I listen to music. And sim 1 guard rejecting calls.
    If there is anything that Sony can do, please fix.

    I am pleased to learn that XperiaM4! Yes, you are only able to choose a ringtone to use for both Sims on the phone, however, you may be able to download a third party application from the game store that allows sim cards to have different one from the other ringtones. May enter "dual sim ringtone" or similar keywords in play store and take a look at the options.

  • Can Skype in the background and display the incoming calls?

    I have i-Pads on the wall which 24\7 software automation... Is there a setting that I can get calls incoming when Skype connects but running in the background?

    iOS 5 setting > notification > Skype (ON) > alert style (ALERT) > other (WE) all. iOS 5 setting > App Skyle > auto login (ON) > offline (NEVER) > notification message (sound and alert (ON).)

  • Problems with incoming calls not being recognized

    I have a motorazr2 V9m.

    Can I use any phone and call my motorazr2 V9m.

    The call will not be displayed on my motorazr2 V9m.

    On the phone, I'm calling from the call will ring until voice mail rises.

    A voice message on the motorazr2 V9m notification will pop up sometimes immediately or later.

    The voicemail notification pop up of time varies. Sometimes it will not show up until you try to make an outgoing call.

    I can call the other phone several times and the motorazr2 V9m will not display a call.

    I'll try 5 or 6 times before the motorazr2 V9m will show and ringing an incoming call.

    I tried this in many places with the same result.

    Any suggestions?

    Thank you

    Looks like a reset did the trick.

  • New update of Skype - no incoming calls more - Version 4.10.0.332 (4.10.332)

    Hello, SKYPE,.

    Since you provided the new version of Skype for IOS, incoming calls stopped working. I've tried everything. I talked to two of my friends and they know exactly the same problem. I also talked to an agent of very naughty Skype chatting. This is the culmination of the measures already taken:

    1 Delete SKYPE and reinstalled

    2. check that we have the latest version of IOS and SKYPE

    3. under Notifications, made sure everything is turned on

    4. under settings, then on SKYPE, made sure sign is automatically turned on and switch to offline mode is set to 'NEVER '.

    5. also ensured that a device is connected with AN account

    6. it doesn't matter if you call the SKYPE NUMBER or SKYPE to SKYPE, the call does not work

    7 missed calls / messages appears later in SKYPE when you open the SKYPE application

    8. complete reset of the network settings Device IOS

    9. on my iPad, I actually completely deleted and reset the whole device to the factory settings and deleted everything out of it. Reinstalled only SKYPE, but the same behavior. Does not work.

    Incoming calls work on my Mac Book and my PC.

    Also, if you keep the 'in focus' app on your device IOS, which means that you make sure that your screen is not locked or you do not use e-mail, etc., then the incoming calls will work on SKYPE.

    SKYPE: You need to fix this ASAP. It is terrible user experience. I have a real number of SKYPE that I use regularly. My whole family uses SKYPE with each person having their own SKYPE number. Now, we can no longer talk to each other.

    By the way I know that you're going to ask the question, so here's my version of IOS: 6.1.3

    SKYPE: PLEASE CORRECT THIS IMMEDIATELY, OR BE A WAY FOR THE ENTIRE UNITED STATES, BACK TO THE OLD VERSION OF SKYPE.

    See you soon

    All discussions on this topic moved here:

    http://community.Skype.com/T5/IOS-iPhone-and-iPad/no-incoming-calls-since-August-update-4-10-v-when-...

    Go to this link and start reading the page 7 from...

    We can close this thread

    See you soon,.
    Farms

  • Skype rejects all incoming calls.

    I have major problems with incoming calls.

    When an incoming call arrives, my client desktop computer immediately rejects the call. Basically the same as picking up the phone and immediately hanging up on the caller.

    However, I can shout to the people, and the call works normally. I can even use the video when calling other people.

    Reset the client by following the directions listed elsewhere on this site I give one call in which he tries to connect, but never quite finished the connection and hang up. After that, he immediately goes to immediate disconnection.

    It's really very annoying because I am currently unemployed and must be able to receive calls from employers and potential employers.

    Currently using Skype 7.0.0.102 for the desktop on Windows 8.1.

    Is it possible I can get support on this issue?

    In fact, I just a little more research and found that, apparently, the first call after starting Skype will go, however, Skype will be "think" are you still in this first call, even though you could have ended it already and therefore show that you are 'busy' and reject an incoming call.

    There seems to be a problem with many users of Skype 7.0.0.102 and Support of Skype is apparently downgrade to Skype 6.9 and disabling automatic updates, which I won't do. (I like the new design of Skype 7.0: happy)

    I guess the only solution for you is to go back to an older version of Skype, so you can receive your important phone calls to potential employers (good luck!), but my solution is to simply suck it up and wait for an official update of Skype/Microsoft.

    Kind regards

    Jasper

  • Ask incoming calls to make photos FULL SCREEN

    I have an iPhone 6 Plus and unfortunately my incoming calls do not display my picture of contacts in full screen - it's back to the small circle photo! Please if Apple has removed this feature back into place! If no but I'm having this problem then please help!

    Add/change photo in the Contacts application directly on the iPhone.

  • is it possible I can get Siri to tell me that my incoming calls?

    I don't know if it's possible, but when I have my Bluetooth headset and I have incoming calls I don't want to take my phone out to see who is calling.

    No, Siri no announcement incoming caller ID.

  • Connect Skype and incoming calls to the PBX - account problem

    Hello

    I have Skype Connect enabled and linked to my PBX with a SIP profile.

    Now, I need activate incoming calls from Skype to my PBX.

    Therefore, I need to link a Skype business profile account, but he refuses because the account I want to connect is a 'personal account '.

    -Can I convert this account to business account?

    - Or maybe I can delete this account and reuse the same Skype name?

    Currently, I have 2 accounts (the admin Manager, "msfsupply" and a different account 'msf.supply').

    I can't activate one of them for incoming calls.

    I would like to be able to use one of these Skype names for incoming calls from my Skype Connect.

    Please tell us what is the best thing to do.

    Thank you

    Renaud

    Haha...

    I started first with the help of Skype.

    They told me to contact microsoft, because it is a business problem.

    I called Microsoft

    They told me that it was not for them either and I should post a question here on answers.microsoft.com to get a technician on that.

    Skype sale:

    https://www.Skype.com/en/business/

    We do not work for Microsoft.

    We are mainly volunteers here, just like you, computer users who give free advice from other users in our own spare time.

    So, all I can suggest is TechNet, if Skype and Microsoft won't help you:

    https://social.technet.Microsoft.com/forums/Lync/en-us/home?Forum=sfbfr

    Kind regards.

  • I didn't call and incoming call outgoing

    I fell like Iphone6s big trouble. I bought Iphone6s or 64 GB-GBR date December 17, 2015. Please help me. I have no incoming call and exit. Sometimes, received a call incoming and outgoing but problem fallen time maximum about to call. I am from Bangladesh. My friend Mr. kamal there send 6 s Iphone for me just gift. I don't understand how can I do now? My mobail part number: MKQQ2 / serial number of the BA: F7 * RYD IMEI: *.

    Sorry, but your post makes no sense in English.  Get help to repost your question, or post in your native language. NEVER send personal information such as your IMEI number and the serial number in this or any public forum.

  • BlackBerry Z10 problem with reception and to make a call after updating to OS.

    I just updated my Z10 STL100-3 model with the new operating system 10.3.2.2168. Now, I can not answer incoming calls. The phone rings, but there is no screen to answer or reject the call. I am also unable to unlock while the phone is ringing. Once the caller hangs up the normal opening if Poster Advisor I missed a call and then allows me to unlock the phone. When you place a call, the screen does not change for me to end the call. In other words, I touch the contact and it will automatically start the numbering, but the screen does not respond or don't change to indicate that the call is made. Then I need to cut the phone to hang up!

    Hello and welcome to the community!

    Well, assuming that you have waited the usual 48-72 hours, with a lot of reboots (including the battery grips) and this behaviour is new, and the only thing that has changed is the operating system updated... so, the most common thing to do after an update which results in problems is to perform a reload of the OS. Sometimes the update process have errors and others... with a reload often cure the problems.

    Official methods, which will be controlled as to what exact OS versions are available:

    Unofficial methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval (unless you're on 10.3.2, in which case 10.3.1 and earlier are now blocked, but you should be able to use any 10.3.2 it's official):

    Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

    Good luck and let us know!

  • The easiest way to support the call between the ports of SPA-8000 and 2 GWs?

    My group of Silicon Labs is interested by using several SPA-8000 s to configure the VoIP impairment test systems for use with our data and fax modems.  (Coincidentally, ports FXS SPA-8000 use our devices Si3215 SLIC).  The SPA-8000 s will not interface with an ITSP or PSTN, but we do not have a deficiency of external network device (Shunra VE unit), we will use to undermine statistically VoIP packets.

    I saw the note of analog, IP/PBX solution phone app, but I like to keep installation as simple as possible (i.e. use only 8000 s-SPA without a SPA-9000).  It is possible to make calls to port - au port uses only the SPA-8000 and an external router (i.e. without an ITSP or SIP server)?  The SPA Administration Guide - 8000 stipulates that FXS-to-FXS connectivity is possible using an IP router controlling crossed, but provides no specific information. Can you recommend a Cisco/Linksys router that allows this?

    Thank you

    Bob Giaraffa

    Dear Sir;

    This is possible. All you have to do is connect the two SPA8000 to a router that provides IP addresses. Easier configuration, each SPA8000 WAN IP address to static.

    On each device, all you have to do is:

    -[Line x] appeal without reg Yes

    -[Line x] years call without reg toYES

    -Define a (digital) user id - this is what the other pty faces

    -On the defined proxy ip_address:port the FXS port to the other device that you want to set the line (it's one by one). First port is 5060, 5061 second and so forth...

    Submit the changes

    concerning
    Alberto

  • 7 Windows fax and scan-error message "incoming call cannot be answered as a fax call.

    I use a U.S. Robotics 56 K Fax Modem model 5686 G v.92 and when a fax is sent it tells me that the call has been answered as a fax call and then during treatment, I get "incoming call cannot be answered as a fax call.  I've been working on this for 3 days now and just can't seem to get this point.  Any suggestions would be greatly appreciated.

    Hey Joe,

    You must ensure that your computer (or your external fax modem) is connected to an analog phone line, and that the phone line has a dial tone so that you can place and receive phone or fax calls.

    Method 1:

    Turn on send and receive options for a modem



    Check the modem settings to see if send and receive options are turned on.

    Turn on send and receive options for a modem

    1. click the Windows Start button, click all programs and then click Windows Fax and Scan.

    2. to use the fax at the bottom of the left pane, click Fax.

    3. click on the Tools menu and then click fax settings. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    4. click the general tab and then, under device name, make sure that the modem is selected.

    5. under send/receive options, make sure that allow it the device to send faxes check box is selected.

    6 make sure that allow it the device to receive fax calls check box is selected, and then choose how to receive faxes:

    * To answer phone calls as incoming fax calls manually by using Windows Fax and Scan, click on manually answer, and then click OK.

    * To have Windows automatically answer phone calls as incoming fax calls, click on answer automatically after X rings, select the number of rings after which Windows can try to answer phone calls as incoming fax calls, and then click OK.

    If someone else set up the computer to send and receive faxes, you might not have permission to use the built-in or external fax modem.

    Method 2:


    Give all users permission to send and receive faxes

    1. click the Windows Start button, click all programs and then click Windows Fax and Scan.

    2. to use the fax at the bottom of the left pane, click Fax.

    3. click on the Tools menu and then click fax settings. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    4. click on the Security tab and then, in the names box, any user or group, click everyone.

    5. in the permissions for everyone box, select the check box allow next to permission to Fax and then click OK.

    For more information, access the link below

    The problems of fax (valid also for Windows 7)

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-fax-problems#EJBAC

    Additional information:

    Configure your computer to send and receive faxes

    http://Windows.Microsoft.com/en-us/Windows7/set-up-your-computer-to-send-and-receive-faxes

    Fax and scan Windows

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan

    Fax: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/faxing-frequently-asked-questions

    Please post back with the State of the question and we will be happy to help you.

  • Can't do out calls and incoming calls go straight to voicemail

    Cannot do out calls and incoming calls are directed to voicemail

    See If you can not connect to a cellular or cell - data Apple Support Network.

    TT2

Maybe you are looking for

  • HP Laserjet 1217nfw multi-func: Yosemite Mac says my wireless HP (laserjet) printer is offline, but Mac 10.9 is good with it

    My HP Lasejet 1217nfw multifunction printer/scanner/fax printer is wireless and has been very well with Mac OS x 10.9 work laptop. Got another laptop Mac with Mac OSX10.10 (Yosemite).  Who does not recognize the wireless printer. I can add the printe

  • Remove the old updates to free up space

    Original title: updates for Windows Vista I regularly receive notifications of a security update for Windows Vista a/o updated for Windows Vista a/o Update Cumulative security for IE9.  In my history of update, the update files earlier I installed th

  • Can I create a Windows 7 recovery on a system disk dual boot?

    I want to uninstall Ubuntu from a computer running Windows 7 and Ubuntu. I understand that, to do this, I need to delete the partitions of Ubuntu on the computer and use a windows recovery disk. Because I don't have a recovery disk, I intend to use t

  • ListView refreshing

    Hello I work with ListView to display a list of contacts, some online and offline. I want contacts who are online to appear at the top of my list, and they might come online later so that they will be put to the top of the list, if they come online l

  • How to get rid of Ot Shot?

    OT Shot downloaded when I downloaded another program.  It caused problems almost immediately.  As recommended when I Googled, I deleted it via the control panel but the remains have stayed behind.  It's in the start menu as a small icon of heart.  It