spa3102 from point to point
Environment: PBX in the basement with charger of fiber on the second floor. PBX does not support an IP conference room phone but all office phones are WHAT VOIP connected to a card in the PBX. I need to get an analog extension to the second floor.
How can I configure the SPA 3102, connected to a line on the PBX and ethernet to pass and the SPA 3102 on the second floor of the connected switch and telephone analog?
If your PBX is digital and supported sip you may be able to simply use an analog terminal adapter (ATA) and install a new extension on the PBX.
If this is not possible, it is possible to use a SPA3102 to an analog telephone line from the PBX interface and extend this line to a distant analog terminal as an another SPA3102 adapter or other terminal adapter analog voip which takes supported unregistered calls. Using a SPA3102, is not as elegant or professional than the commercial market TC1910 that was referenced and is sold specifically for this purpose of analog telephone extension.
"Back to back" to the SPA3102 2 configuration has been around for a while. Search on 'SPA3102' back to back and you will find the help as the detail in this thread
http://community.Linksys.com/T5/VoIP-adapters/connect-back-to-back-2-Spa...
Basically, you are configuring the SPA3102 PSTN line tab to attach to the analog phone line and communicate automatically with the ata remote using numbering direct ip unregistered. For a call from a PBX, when receiving sounds of the PBX the SPA3102 will automatically call the ATA distant. For an outgoing call from the ATA distance, when the caller takes the phone off the hook ATA automatically dials the SPA3102, which will return a tone to the caller.
The ata remote is configured on the tab as a voip phone line.
Settings key on both units is registry: no, do call without Reg: Yes, and call without Reg: Yes
Other parameters are noted in the thread referenced above.
Call is made using the ip address: port of the map. You configure the adapters with static ip addresses.
Tags: Cisco Support
Similar Questions
-
Menu from point items 18 click on...
Hello
I have a menu with links to a list of Chapter 28 video clips.
The video fits on a DVD - (I have successfully created a disc) - and the disc broadcast until the end without any problem.
The problem I have is that menu items menu from point 18 (from 19) do not highlight as pimples and so cannot be clicked.
This also applies to a back button "main Menu". Everything - in article 19 in the menu works as it should.
In the photos below, you will see the list of chapters a 28 connections added to the timeline. These are identically configured through the entire list.
Is there a limit to how many links can I have in a menu?
I have now spent three days trying to get this to work properly and my client waits patiently for the DVD of the evidence.
If I can't solve this problem, I'll have to find another piece of authorware... recommend a?
Thank you
Dave
There is a limit on the number of items, you can access a menu. Make a submenu. And as you have discovered 18 is the limit for a menu of 16 x 9.
-
How to get filenames from points of view V$ ASM_?
Oracle 11.2.0.1 on redhat 5.2. I would like to see the list of my ASK files with the filename (as in dba_data_files) and size. V $ ASM_FILE, there is a numero_fichier but not the file name. How can I get the filename from points of view V$ ASM_?user13148231 wrote:
Oracle 11.2.0.1 on redhat 5.2. I would like to see the list of my ASK files with the filename (as in dba_data_files) and size. V $ ASM_FILE, there is a numero_fichier but not the file name. How can I get the filename from points of view V$ ASM_?Hello
ASM files are not physical as database files. Of course there are alias names.
SQL > Select numero_fichier, name from v$ asm_alias;
HTH.
-
My tablet is lagging on flash! Lines drawn from point of departure!
Good so I scoured internet for centuries now, and I can't find a single solution to my problem. I've attached a screenshot of my problem and I use a Pro Intuos of Wacom support. My laptop specs are high, so is also not the issue.
Whenever I try to draw with my brush a line gets in. from my starting point. Flash is also slightly. When I try to drag or do SOMETHING there is a delay.
I've recently updated my wacom drivers to see if the problem will get better, but it didn't. So to conclude, I have had this problem since the beginning.
One solution I've found is to go into computer management > Services and applications > stopping and restarting the wacom professional service. It is however so my pen works like a mouse, which means no pressure/tilt sensitivity.
Please please please help. If anyone has any suggestions let me know
Found the solution!
You must go to the right click on your desktop and go to the display settings if you are on windows 10. Change the scale of your icons and text to 100%. Make sure that flash is closed before doing this. After that you the scale to 100%, please disconnect and reconnect. Flash should work perfectly!
-
polygonal from point lasso circle TINY tool
Is it possible to make the dang point circle when you use the polygonal lasso tool is more or a different color than just a small transparent ants market circle? It's ridiculously small and hard to find to close when I'm something lasso.
Press right on entry to close the selection.
-
"Update files" when moving from points
Hello
As you know, every time you move a file from one folder to another, DW will identify the related linked files and update for you. In the past, whenever I could do this, I just want to move the file, and in a second or two a pop up window would be with a detailed list of linked files. This window would ask if I wanted to update these files. I click 'Yes' and it would take seconds.
I'm not sure what I did to change the way that is done, but now for some reason any whenever I move a file a window opens asking if I want to analyze the site. I click Yes, and the result is a dialog box indicating "scan all files in the site", which lasts less than 10 minutes to complete. The final product is the same, but it takes much more time.
Does anyone know what I can accidentally fact to cause this? I travel some type of adjustment?
-Mark
You have disabled Cache in your Site Deffinitions?
-
Note: This problem occurred with Tablet Genius... not with the mouse...
Thanks in advance,
Hello
This problem is reproducible on some specific devices only and is currently being studied and followed internally. No progress on this will be provided.
Meanwhile, if it only once is could not a problem for you you please uninstall the driver for Tablet and Flash (cleaning use CC tool) and re-install the latest version of drivers for your tablet, and also Flash Pro CC 2014 creative cloud. Restart the system and check if the problem occurs? Because most of the time the driver update has helped solve the problems associated with the brush.
Thank you
Sangeeta
-
Draw a line from any Point to any Point B dynamically using AS3
I'm doing an animation where there are several places (for example A, B, C, D,...) on a map. If a person clicks a location A and then B elsewhere, I wanted to draw a dotted line from point A (from the destination of the aircraft) to point B (to destination of the flat) using AS3. Please help me...
Here's a quick timeline and dirty code it does (class is below):
var line:Shape; var lineGraphics:Graphics; var clickSwitch:int = 0; var mousePositions:Array = []; var conversion:Number = 180 / Math.PI; init(); function init():void { drawBackground(); line = new Shape(); addChild(line); lineGraphics = line.graphics; stage.addEventListener(MouseEvent.CLICK, onClick); } function onClick(e:MouseEvent):void { clickSwitch = 1 - clickSwitch; mousePositions[clickSwitch] = new Point(mouseX, mouseY); if (clickSwitch == 0) { drawLine(); } else { removeLine(); } } function removeLine():void { lineGraphics.clear(); line.rotation = 0; } function drawLine():void { lineGraphics.lineStyle(1, 0xff0000); lineGraphics.moveTo(0, 0); var dotDistance:Number = 2; var nextX:Number = dotDistance; while (line.width < Point.distance(mousePositions[0], mousePositions[1])) { lineGraphics.lineTo(nextX, 0); nextX += dotDistance; lineGraphics.moveTo(nextX, 0); nextX += dotDistance; } line.rotation = conversion * Math.atan2(mousePositions[0].y - mousePositions[1].y, mousePositions[0].x - mousePositions[1].x); line.x = mousePositions[1].x; line.y = mousePositions[1].y; } function drawBackground():void { var s:Shape = new Shape(); var g:Graphics = s.graphics; g.beginFill(0xC0C0C0); g.drawRect(0, 0, stage.stageWidth, stage.stageHeight); g.endFill(); addChild(s); }
Class:
package { import flash.display.Graphics; import flash.display.Shape; import flash.display.Sprite; import flash.events.MouseEvent; import flash.geom.Point; public class DottedLine extends Sprite { private var line:Shape; private var lineGraphics:Graphics; private var clickSwitch:int = 0; private var mousePositions:Array = []; private var conversion:Number = 180 / Math.PI; public function DottedLine() { init(); } private function init():void { drawBackground(); line = new Shape(); addChild(line); lineGraphics = line.graphics; stage.addEventListener(MouseEvent.CLICK, onClick); } private function onClick(e:MouseEvent):void { clickSwitch = 1 - clickSwitch; mousePositions[clickSwitch] = new Point(mouseX, mouseY); if (clickSwitch == 0) drawLine(); else removeLine(); } private function removeLine():void { lineGraphics.clear(); line.rotation = 0; } private function drawLine():void { lineGraphics.lineStyle(1, 0xff0000); lineGraphics.moveTo(0, 0); var dotDistance:Number = 2; var nextX:Number = dotDistance; while (line.width < Point.distance(mousePositions[0], mousePositions[1])) { lineGraphics.lineTo(nextX, 0); nextX += dotDistance; lineGraphics.moveTo(nextX, 0); nextX += dotDistance; } line.rotation = conversion * Math.atan2(mousePositions[0].y - mousePositions[1].y, mousePositions[0].x - mousePositions[1].x); line.x = mousePositions[1].x; line.y = mousePositions[1].y; } private function drawBackground():void { var s:Shape = new Shape(); var g:Graphics = s.graphics; g.beginFill(0xC0C0C0); g.drawRect(0, 0, stage.stageWidth, stage.stageHeight); g.endFill(); addChild(s); } } }
-
Hi all,
Has anyone ever put in place a class derived from point cloud which could have different colors? What about the different width of stripe?
See you soon,.
Cyrille
Hi CD,.
The problem you see is the result of the configuration of the pen. EndCap property is essentially the brush tip style you are using. In my view, that the default is flat, which causes your line look like his zig zag. Instead, use a round tip and you will get a much smoother looking line.
Dim myPen As New Pen (col, 20)
myPen.EndCap = Drawing2D.LineCap.Round
e.Graphics.DrawLine (myPen, pt1, pt2) -
Point cloud: color gradient
Hello
I can't find an example where I can create a custom class plot. I have to be able to line the plot of color based on the value of Y and make it look like a smooth gradient. Ideally, I would like to change the size of the line as well. This would allow me to "draw" the 3 variables using a 2D graph. I started (VB.Net):
Imports NationalInstruments.UI
Public Class clCustomPlot
Inherits from point cloud
Public Sub New()
MyBase.New)
End Sub
Protected / Sub OnBeforeDraw(ByVal sender As Object, ByVal e As NationalInstruments.UI.BeforeDrawXYPlotEventArgs)
End SubEnd Class
But VS tells me that:
Void of MeasStudioGraphLineColour error 'OnBeforeDraw' cannot be declared 'overrides' because it does not replace a sub in a base class.
Thanks for your help,Nicolas
I got it to work! For all those who are interested, here's a VB.Net custom dispersion diagram that will show you how/color along the line of control.
Imports NationalInstruments.UI
Imports System.Drawing
Imports System.Drawing.Drawing2D
Public Class clCustomScatterPlot
Inherits from point cloud
Private dblMin As Double
Private dblMax As Double
Private colMinColour As System.Drawing.Color
Private colMaxColour As System.Drawing.Color
Public Sub New (ByVal MinValue As Double, ByVal MaxValue As Double _)
ByVal MinValueColour As System.Drawing.Color, ByVal MaxValueColour As System.Drawing.Color)
MyBase.New)
"no check is performed for the fact that MinValue<>
dblMin = MinValue
dblMax = MaxValue
colMinColour = MinValueColour
colMaxColour = MaxValueColour
End Sub
Protected override void OnBeforeDraw (ByVal e As BeforeDrawXYPlotEventArgs)
"Clip data, browse the data cut, map and draw."
Dim intrigues as XYPlot = e.Plot
Var clippedXData() As Double = Nothing
Var clippedYData() As Double = Nothing
parcel of land. ClipDataPoints (clippedXData, clippedYData)
For i As Integer = 0 To clippedXData.Length - 2
Protected x 1 Double = clippedXData (i)
Protected x 2 = Double clippedXData (i + 1)
Var y1 As Double = clippedYData (i)
Var y2 As Double = clippedYData (i + 1)
Dim point1 As PointF = plot. MapDataPoint (e.Bounds, x 1, y1)
Dim point2 As PointF = plot. MapDataPoint (e.Bounds, x 2, y2)
Var pen As Pen = New Pen (ValueToColour (y2))
Dim g As Graphics = e.Graphics
g.DrawLines (pen, new PointF() {point1, point2})
Next
e.Cancel = True
End Sub
Private Function ValueToColour(ByVal value As Double) As Color
If value<= dblmin="" then="" return="">=>
If value > = dblMax then return colMaxColour
Pctg As Double = (value - dblMin) / (dblMax - dblMin)
Dim a, r, g, b As Integer
a = CInt (CInt (colMinColour.A) + pctg * (CInt (colMaxColour.A) - CInt (colMinColour.A)))
r = CInt (CInt (colMinColour.R) + pctg * (CInt (colMaxColour.R) - CInt (colMinColour.R)))
g = CInt (CInt (colMinColour.G) + pctg * (CInt (colMaxColour.G) - CInt (colMinColour.G)))
b = CInt (CInt (colMinColour.B) + pctg * (CInt (colMaxColour.B) - CInt (colMinColour.B)))
r = Math.Max (0, r): r = Math.Min (255, r)
g = Math.Max (0, g): g = Math.Min (255, g)
b = Math.Max (0, b): b = Math.Min (255, b)
Return System.Drawing.Color.FromArgb (a, r, g, b).
Var col As Color = System.Drawing.Color.FromArgb (a, r, g, b).
Return col
End Function
End Class
-
Crash and passage of error 0xC0000005 pointer to array
Hello
I am interfacing a detector CCD (head of c7041 cotrolled by usb c7557-01 controller) using a dll factory supplied which contains functions for controlling the detector. The dll installed correctly, make a simple program to control simple functions (such as cooling, the ADC resolution...) ad it works fine.
In fact, I try to get data from the CCD sensor using "getProfile", wich request as an argument a pointer to an array of U16.
The reference of the dll is not as clear, but I discovered that the service must "fill" the table with data.
How can I switch from point items in a table of U16?
Now, if you pass the array to the function, labview crashes.
Thank you
Eugenio
It is more likely that your function should be called as. No guarantee, as the documentation is rather rare, but it is a reasonable estimate of the documentation that you have provided.
-
10MB ethernet point to point, traffic problems
We have a 5324 on each end of this service from point to point ethernet 10MB.
When we flood udp the link to a server on the end, all other ports of call, i.e. ping, snmp, e-mail and others.
Therre any options to ensure that ALL traffic gets a piece of the pipe, and it does not collapse. ?Thank you
-
Video point-to-point call - SX20
All,
If I have 2 end points x SX20 registered in the same cluster of UCM and accessible via the internal network with no crossing of firewall, should I additional permit (they all have two licenses of room) to make a video call from point to point?
The licenses around that are a bit of a headache! :/
Thank you
D
Hello
Room for your CUCM licenses just save your endpoint SX20 points and make a point to video call within your network.
Kind regards
Acevirgil
-
Coordinates of the point on the spline
Hi guys.
I'm banging my head on the wall for some time now, with this question.
As a simplified version, I have a perfect circle, and I need to find the coordinates of the midpoint between two vertices. In this case:
A is a summit which coordinates [0, 0]
B is a summit whose details [500, 0]
A1 is OutTangent from point A of coordinates [138,-138]
B1 is InTangent point B of coordinates [362,-138]
The goal is to find the coordinates of the midpoint.
Again, it is the very simple scenario. Other times tangent will be different lengths and forms will be so, at random, so I want to wrap my head around to find coordinates based on 2 summits and InTangents and OutTangents.
Thanks in advance.
UQg,
I think it works:
t =. 5; percentage along the path (between 0 and 1)
P0 = [0,0]; vertex 1
P1 = [138,-138]; tangent 1
P2 = [362,-138]; 2 tangent
P3 = [500.0]; Vertex 2
c = 3 * (p1 - p0);
b = 3 *(p2-p1) - c;
a = p3 - b - c - p0;
((un * t + b) * t + c) * t + p0
Dan
-
Question on brush\pointer form
How do I get my pointer\brush to original - all of a sudden everything that I see a small sign + and can not see edge of brush, so I know what I am cloning or erasure. With the help of CC
Please check preset
Change the brush size and hardness in Photoshop CS6 "Julieanne Kost's Blog
How to change the clone stamp brush cursor from point crossed at a circle?
Concerning
Baudier
Maybe you are looking for
-
login screen shows but won't let me log on
I turned on my IMac this morning. Displays the login screen, but when I click on my name, it does not. I did a restore to my time capsule, but it changed nothing. I can't always connect. Any help would be appreciated.
-
A Wi-fi-no live connection connects
network security weak shared - key not supported by windows -this is the error message I get. It worked fine for months. He doesn't want a security key 9which I) in the search for networks not supported, nothing appears. The router is in a closed off
-
destination folder access denied in external HARD disk
I have problem with my external hard drive on windows. I am running windows out of boot camp, my external hard drive had drivers mac and is the mac format what ever he calls. Here's the question, I can't access my hard drive on my other laptop window
-
How to highlight the selected line in an interactive report in apex5?
HelloI want to emphasize the selected line in the report by changing the background color of the line. Basically, I want to do this. I really want to do is, select a row in the report and according to the selected line, I want to retrieve other data
-
In FDMEE where can I activate the zero power supress?I see this in the newspaper,ZP................ Zero suppress, amount field contains a value of 0 and zero suppress is runningI want to create blocks in Essbse so a calc will produce correct results