SPA3102 will not dial a number, or forward calls to Elastix

For the past 2 days, I am trying to get this SPA 3102 to work as a PSTN gateway but no luck... My network is 172.16.1.0/24. My default gateway is 172.16.1.1 and local IP address of the SPA is 172.16.1.200. Elastix server is 172.16.1.8. I don't have any other VOIP providers so I na not configure my WAN for SPA settings (Nothing connected to the WAN port)

Here are the screenshots and my config settings:

The SIP Trunk settings:

Outbound caller ID: 383579 (my local PSTN number)

Chanels maximum: 1

Name of the Trunk: pstn

Parameters of peers:

do not allow = all
allow = ulaw
Polycom = no
context = of-RTC
dtmfmode = rfc2833
Host = 172.16.1.200
incominglimit = 1
NAT = never
port = 5061
qualify = yes
secret = 300
type = friend
username = pstn
Entrants settins empy rest under vacuum

Road of basketing:

DID number: 383579

Transfer the call to ext: 205

rest is default or is empty

Line1 SPA is disabled because I want just difficulty dailing and receive phone calls.

Here are a few screenshots of RTC in SPA line configuration:

As see you in picture above I have sound but spa isn't answer...

It comes from the phew journal asterisk call out:

-[358291@from-internal:1] Macro execution ("SIP/205-087af3d8","user-callerid |") SKIPTTL | ") in new stack
-Execution [s@macro-user-callerid:1] Set ("SIP/205-087af3d8", "AMPUSER = 205") in new stack
-Execution [s@macro-user-callerid:2] GotoIf ("SIP/205-087af3d8","0?") report") in new stack
-[S@macro-user-callerid:3] ExecIf execution ("SIP/205-087af3d8","1" | ") The value | REALCALLERIDNUM = 205 ") in new stack
-Execution [s@macro-user-callerid:4] Set ("SIP/205-087af3d8", "AMPUSER = 205") in new stack
-Execution [s@macro-user-callerid:5] Set ("SIP/205-087af3d8", "AMPUSERCIDNAME = Damir here") in new stack
-Execution [s@macro-user-callerid:6] GotoIf ("SIP/205-087af3d8","0?") report") in new stack
-Execution [s@macro-user-callerid:7] Set ("SIP/205-087af3d8", "AMPUSERCID = 205") in new stack
-Execution [s@macro-user-callerid:8] Set ("SIP/205-087af3d8", "CALLERID (all) ="Damir Reic ' <205>' ") in new stack
-Execution [s@macro-user-callerid:9] Set ("SIP/205-087af3d8", "REALCALLERIDNUM = 205") in new stack
-[S@macro-user-callerid:10] ExecIf execution ("SIP/205-087af3d8","0 |") The value | Channel (Language) = ") in new stack"
-Execution [s@macro-user-callerid:11] GotoIf ("SIP/205-087af3d8","1?") continue ") in new stack"
-Goto (macro-utilisateur-callerid, s, 20)
-Execution [s@macro-user-callerid:20] NoOp ("SIP/205-087af3d8","Using CallerID"Damir Reic" <205>" "") in new stack
-Execution [358291@from-internal:2] Set ("SIP/205-087af3d8", "_NODEST =") in new stack
-[358291@from-internal:3] Macro execution ("SIP/205-087af3d8","record-enable |") 205. OFF | ") in new stack
-Execution [s@macro-record-enable:1] GotoIf ("SIP/205-087af3d8","1?") check ") in new stack"
-Goto (macro-record-enable, s, 4)
-AGI [s@macro-record-enable:4] performance ("SIP/205-087af3d8","recordingcheck |") 20090827 205946 | 1251399586.64 ") in new stack"
-Launch Script AGI/var/lib/asterisk/acted-bin/recordingcheck
recordingcheck |-205946 20090827 | 1251399586.64: outgoing recording not enabled
-Recordingcheck AGI completed Script, return 0
-Execution [s@macro-record-enable:5] MacroExit ("SIP/205-087af3d8","" "") in new stack
-[358291@from-internal:4] Macro execution ("SIP/205-087af3d8","dialout-trunk |") 2. 358291 | ") in new stack"
-Execution [s@macro-dialout-trunk:1] Set ("SIP/205-087af3d8", "DIAL_TRUNK = 2") in new stack
-Execution [s@macro-dialout-trunk:2] GosubIf ("SIP/205-087af3d8","0?") Sub-pincheck | s | 1 ") in new stack"
-Execution [s@macro-dialout-trunk:3] GotoIf ("SIP/205-087af3d8","0?") disabletrunk | 1 ") in new stack"
-Execution [s@macro-dialout-trunk:4] Set ("SIP/205-087af3d8", "DIAL_NUMBER = 358291") in new stack
-Execution [s@macro-dialout-trunk:5] Set ("SIP/205-087af3d8", "DIAL_TRUNK_OPTIONS = tr") in new stack
-Execution [s@macro-dialout-trunk:6] Set ("SIP/205-087af3d8", "OUTBOUND_GROUP = OUT_2") in new stack
-Execution [s@macro-dialout-trunk:7] GotoIf ("SIP/205-087af3d8","0?") nomax ") in new stack"
-Execution [s@macro-dialout-trunk:8] GotoIf ("SIP/205-087af3d8","0?") chanfull ") in new stack"
-Execution [s@macro-dialout-trunk:9] GotoIf ("SIP/205-087af3d8","0?") skipoutcid ") in new stack"
-Execution [s@macro-dialout-trunk:10] Set ("SIP/205-087af3d8", "DIAL_TRUNK_OPTIONS =") in new stack
-[S@macro-dialout-trunk:11] Macro execution ("SIP/205-087af3d8","outbound callerid |") 2 ") in new stack"
-[S@macro-outbound-callerid:1] ExecIf execution ("SIP/205-087af3d8","0 |") SetCallerPres | ") in new stack
-[S@macro-outbound-callerid:2] ExecIf execution ("SIP/205-087af3d8","0 |") The value | REALCALLERIDNUM = 205 ") in new stack
-Execution [s@macro-outbound-callerid:3] GotoIf ("SIP/205-087af3d8","1?") normcid ") in new stack"
-Goto (macro-sortant-callerid, s, 6)
-Execution [s@macro-outbound-callerid:6] Set ("SIP/205-087af3d8", "USEROUTCID =") in new stack
-Execution [s@macro-outbound-callerid:7] Set ("SIP/205-087af3d8", "EMERGENCYCID =") in new stack
-Execution [s@macro-outbound-callerid:8] Set ("SIP/205-087af3d8", "TRUNKOUTCID = 383597") in new stack
-Execution [s@macro-outbound-callerid:9] GotoIf ("SIP/205-087af3d8","1?") trunkcid ") in new stack"
-Goto (macro-sortant-callerid, s, 12)
-[S@macro-outbound-callerid:12] ExecIf execution ("SIP/205-087af3d8","1" | ") The value | CALLERID (All) = 383597 ") in new stack
-Execution [s@macro-outbound-callerid:13] GotoIf ("SIP/205-087af3d8","1?") output ") in new stack"
-Goto (macro-sortant-callerid, s, 11)
-Execution [s@macro-outbound-callerid:11] MacroExit ("SIP/205-087af3d8","" "") in new stack
-[S@macro-dialout-trunk:12] ExecIf execution ("SIP/205-087af3d8","1" | ") AGI | fixlocalprefix") in new stack
-Launch Script AGI/var/lib/asterisk/acted-bin/fixlocalprefix
> fixlocalprefix: using chart 0 + [0] [9] X.
> fixlocalprefix: using mires NXXXXX 0 +.
== fixlocalprefix: Dialpattern 0 + NXXXXX matched. 358291-> 0358291
-Fixlocalprefix AGI completed Script, return 0
-Execution [s@macro-dialout-trunk:13] Set ("SIP/205-087af3d8", "OUTNUM = 0358291") in new stack
-Execution [s@macro-dialout-trunk:14] Set ("SIP/205-087af3d8", "custom = SIP/pstn") in new stack
-[S@macro-dialout-trunk:15] ExecIf execution ("SIP/205-087af3d8","0 |") The value | DIAL_TRUNK_OPTIONS = M(setmusic^) ") in new stack"
-[S@macro-dialout-trunk:16] Macro execution ("SIP/205-087af3d8","dialout-trunk-predial-crochet |" "") in the new battery
-Execution [s@macro-dialout-trunk-predial-hook:1] MacroExit ("SIP/205-087af3d8","" "") in new stack
-Execution [s@macro-dialout-trunk:17] GotoIf ("SIP/205-087af3d8","0?") bypass | 1 ") in new stack"
-Execution [s@macro-dialout-trunk:18] GotoIf ("SIP/205-087af3d8","0?") customtrunk ") in new stack"
-Execution [s@macro-dialout-trunk:19] Dial ("SIP/205-087af3d8","SIP/pstn/0358291 |") 300. ") in new stack"
-Called pstn/0358291
-SIP/pstn - 0885 has 138 sounds
-SIP/pstn - 0885 has 138 replied SIP/205-087af3d8
-Packet2Packet bypass 087af3d8/205-SIP and SIP/pstn - 0885 has 138
-Remote UNIX connection
-Connection to UNIX distance disconnected
-[H@macro-dialout-trunk:1] Macro execution ("SIP/205-087af3d8","hangupcall:" "") in the new battery
-Execution [s@macro-hangupcall:1] ResetCDR ("SIP/205-087af3d8", "w") in new stack
-Execution [s@macro-hangupcall:2] NoCDR ("SIP/205-087af3d8","" "") in new stack
-Execution [s@macro-hangupcall:3] GotoIf ("SIP/205-087af3d8","1?") skiprg ") in new stack"
-Goto (macro-hangupcall, s, 6)
-Execution [s@macro-hangupcall:6] GotoIf ("SIP/205-087af3d8","1?") skipblkvm ") in new stack"
-Goto (macro-hangupcall, s, 9)
-Execution [s@macro-hangupcall:9] GotoIf ("SIP/205-087af3d8","1?") theEnd ") in new stack"
-Goto (macro-hangupcall, s, 11)
-Execution [s@macro-hangupcall:11] Hangup ("SIP/205-087af3d8","" "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on "SIP/205-087af3d8" in the macro 'hangupcall '.
== Spawn extension h (macro-dialout-trunk, h, 1) exited non-zero on 'SIP/205-087af3d8.
== Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on 'SIP/205-087af3d8"macro"dialout-trunk.
== Spawn extension (of-internal, 358291, 4) exited non-zero on 'SIP/205-087af3d8.

As you can see he composed, if found the dialing rule, but nothing happens on the SPA, it will not simply compose anything on.

I guess that something is wrong in RTC spa or configuration of trunk, but I don't know what. I tried like 5-6 guides of strach and none worked for me. Any suggestions?

Kind regards

Damir

HUH! I won't curse now, but I shoul!

Given that I'm NOT using any VOIP provider and I JUST wanted to use RTC it makes SENSE I don't connect anything to the WAN port, BUT when I configured the WAN port with my LAN IP (172.16.1.200) and put a few other IP on the LAN port, everything started working.

It's rly rly rly is NOT logical, but I got it working now.

Tags: VoIP Adapters

Similar Questions

  • New GE Skype Wireless not dial a number

    account called the mobile phones or regular computer very well. Set up wireless with the same account and he answers the call, but do not dial. You compose here but no ring or you connect.

    Unfortunately, this is a known issue with this phone, and no one reported a solution. It does not all credits for the call, but insists on the fact that you have some and makes you pass through this circle if your balance is less than a threshold. For now, at least, the only solution is to buy credits you can never use.

  • will not except sereal number

    I bought Adobe Audition 3 21/10/2008 and that you bought a new computer and it says is not the serial number, the serial number is 1137-1483-5642-7083-6664-2104, registererd to Geoff Beckton, E'mail address [email protected] can help you

    Hi Turbo636,

    Welcome to the Adobe Forums.

    The activation for CS3 hearing server is no longer available.

    Please follow the steps mentioned in the below article to download, install and activate CS3 hearing.

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

    Note: Please do not post your serial number on the Adobe Forums.

    Thank you

  • I'm not a user of cloud. I have the old copy of the Indesign that will not reinstall. Who can I call or contact. Urgent

    I'm not a user of cloud.

    I have an old InDesign (version 5.5) I need to reinstall after a hard drive failure. SN will not work. Who can I contact or call?

    Hi Rick,

    As you mentioned that the serial number does not work, you can check the help below documents:

    Error "serial number is not valid for this product". Creative Suite

    Invalid serial number error

    In case of error message, please specify.

    Kind regards

    Sheena

  • MovieClip will not add to the list after calling addChild()

    I have a MovieClip in the library who refuses to be added to the stage during his call with addChild(). Here's the code.

    You will see a function called clickedACTDD_BTN. You will also see that the function offers a choice if the MovieClip is present, then it is deleted. If it is not present, then this is given properties and added. Also, note my tracing instructions in each choice. All signs as expected but the MovieClip ever arises. I've been on that days code and just can't see what I did wrong. Everyone sees it?

    package
    {
    PAheader 1.0

    import flash.display. *;
    import flash.events. *;
    import flash.geom. *;

    SerializableAttribute public class PAheader extends MovieClip
    {
    public var headerScreen:Screen = Screen.mainScreen;
    public var hdrLogo;
    public var BLKback;
    public var PRFLAVTR:profileAvatarMC = new profileAvatarMC(); Profile avatar
    public var msgbubble:messageBubbleMC = new messageBubbleMC(); ToolTip
    public var magGlass:magnifyingGlassMC = new magnifyingGlassMC(); In the shape of magnifying glass
    public var ACTDD_BTN:ActionsDDBtnMC = new ActionsDDBtnMC(); ACTIONS drop-down list button.
    public var HISDropD_BTN:HistoryDDBtnMC = new HistoryDDBtnMC(); HISTORY drop-down list button.
    public var REPDD_BTN:ReportsDDBtnMC = new ReportsDDBtnMC(); Button drop-down list of REPORTS.
    public var actionbucket:ActionBucket = new ActionBucket();

    public void PAheader()
    {
    addEventListener (Event.ADDED_TO_STAGE, initPAheader);
    } / - End constructor public function PAheader().

    public void initPAheader(e:Event_=_null):void
    {
    trace("==============================================");
    trace ("PAheader called.");
    trace ("of PAheader: visibleBounds.width:" + headerScreen.visibleBounds.width + "visibleBounds.width:" + headerScreen.visibleBounds.height);
    addEventListener (Event.RESIZE, resizedHeader);

    BLKback.width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,1024);
    BLKback.scaleY = BLKback.scaleX;
    //------------- adding Assets ----------------------------------------------------------------------------------------- ---------------------------------

    -Avatar profile
    PRFLAVTR.x = stage.fullScreenWidth - PRFLAVTR.width - 10;
    PRFLAVTR.y = height/2-PRFLAVTR.height/2;
    addChild (PRFLAVTR);
    -The ToolTip
    msgbubble.x = PRFLAVTR.x - PRFLAVTR.width - 10;
    msgbubble.y = height/2 - msgbubble.height/2;
    addChild (msgbubble);
    -Shaped magnifying glass
    magGlass.x = msgbubble.x - msgbubble.width - 10;
    magGlass.x = msgbubble.x - msgbubble.width - 10;
    magGlass.y = height/2 - magGlass.height/2;
    addChild (magGlass);

    } // ----------------------------------------------------------------------------------------- -------------------------- End public function initPAheader().
    public void resizedHeader(e:Event_=_null):void
    {
    trace ("header REDIMENSIONNE");

    } // ----------------------------------------------------------------------------------------- ------------------------- End public function resizedHeader().

    public void addActionsDDButton(caller:MovieClip):void
    {
    trace ("addActionsDDButton. the appellant is: "+ calling);

    -ACTIONS button
    ACTDD_BTN. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
    ACTDD_BTN.addEventListener (MouseEvent.CLICK, clickedACTDD_BTN);
    ACTDD_BTN.addEventListener (MouseEvent.MOUSE_OUT, outACTDD_BTN);
    ACTDD_BTN. ScaleY = ACTDD_BTN.scaleX;
    ACTDD_BTN.x = HISDropD_BTN.x - ACTDD_BTN.width;
    ACTDD_BTN.y = BLKback.y;
    caller.addChild (ACTDD_BTN);
    trace ("added ACTIONS!");

    } / / - End public static void addDDButtons().

    public void addHistoryDDButton(caller:MovieClip):void
    {
    trace ("addHistoryDDButton. the appellant is: "+ calling);
    -HISTORY button
    HISDropD_BTN.width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
    HISDropD_BTN.scaleY = HISDropD_BTN.scaleX;
    HISDropD_BTN.x = headerScreen.visibleBounds.width/2 - HISDropD_BTN.width/2;
    HISDropD_BTN.y = BLKback.y;
    caller.addChild (HISDropD_BTN);
    trace ("added HISTORY!");
    } / / - End addHistoryDDButton() of the public service.

    public void addReportsDDButton(caller:MovieClip):void
    {
    trace ("addReportsDDButton. the appellant is: "+ calling);
    -The REPORTS button
    REPDD_BTN. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
    REPDD_BTN. ScaleY = REPDD_BTN.scaleX;
    REPDD_BTN.x = HISDropD_BTN.x + ACTDD_BTN.width;
    REPDD_BTN.y = BLKback.y;
    caller.addChild (REPDD_BTN);
    trace ("added REPORTS!");
    } / / - End addHistoryDDButton() of the public service.

    / * function removeButtons(theCaller:MovieClip) public
    {
    If (theCaller.Contains (HISDropD_BTN): theCaller.contains (ACTDD_BTN): theCaller.contains (REPDD_BTN))
    {
    theCaller.removeChild (HISDropD_BTN);
    theCaller.removeChild (ACTDD_BTN);
    theCaller.removeChild (REPDD_BTN);
    }
    } / / - End public static void removeButtons(). * /

    public void clickedACTDD_BTN(e:MouseEvent_=_null):void
    {
    trace ("Clicked clickedACTDD_BTN!");
    If (Contains (actionbucket))
    {
    trace (this);
    removeChild (actionbucket);
    trace ("1");
    }
    on the other
    {
    trace (this);
    actionbucket. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,161);
    actionbucket.scaleY = actionbucket.scaleX;
    actionbucket.x = ACTDD_BTN.x;
    actionbucket.y = ACTDD_BTN.y + ACTDD_BTN.height;
    actionbucket.y = ACTDD_BTN.y;
    addChild (actionbucket);
    trace ("2");
    }
    } / / - End clickedACTDD_BTN() of the public service.

    public void outACTDD_BTN(e:MouseEvent_=_null):void
    {
    If (Contains (actionbucket))
    {
    detectTarget (actionbucket);
    }
    } // ----------------------------------------------------------------------------------------- -------------------------- End public function outACTDD_BTN().

    public void detectTarget(target:MovieClip):Boolean
    {
    var mousePoint:Point = target.localToGlobal (new Point (target.mouseX, target.mouseY));
    If (Target.hitTestPoint (mousePoint.x, mousePoint.y))
    {
    trace ("equity bucket!");
    Returns true;
    }
    on the other
    {
    trace ("not on STOCK bucket!");
    Returns false;
    }
    } // ----------------------------------------------------------------------------------------- -------------------------- End public function detectTarget().
    } // ========================================================================================= ======== End public class PAheader{}.
    } // ========================================================================================= =================== End package{}.

    my mistake, this.addChild (this) is not going to work.

    PAheader is a class and a class is not on stage.

    an instance of the class could be on stage, however.

    and another instance might not be on stage.

    just because you see something that is a member of PAheader class, or maybe just looks like a class member, does not mean that all instances, or even none, are on stage.

    to be sure: trace (this.stage) = null, means the instance you are checking is not on stage.

    "(and I don't know where you want to add this instance of the class, but, assuming that your document is a MovieClip and not a Sprite), MovieClip (root) .addChild (this) might work, although it's bad coding."  and stage.addChild (this) of colin will not work because the stage is not defined in this class.

  • Can not dial any number, because when I press the call button, it returns the error message

    Dear friends, I am struggling to dial any phone number. When I press on the symbol of the dial, it immediately returns the error message 'arrested contacts' - ' o is parou - in Portuguese.
    I already tried to clean the cache and the data of all the apps, tried the hard reset and still the same error. What could possibly be wrong? The errors began after I composed a total of 16 numbers huge telefone number (XX XX xxx xxx xxx xxx). Could it be related to that?
    Thank you all!
    Billy of the Brazil!

    Hello

    Dialing a long number should not affect the Dialer in this way. I suggest you factory reset on your phone via the settings > Backup & reset > reset data. Before you do a factory reset, you might want to backup your data.

  • Necessary staff - Acrobat 9 Pro will not accept serial number

    I've recently updated to the Mavericks (I know I know... but not baby!). The only reason why do better that I stopped at Mavericks was to ensure that my CS4 would still work for me (I can't currently upgrade to a new CS'A). Initially, I installed from my disks, but ran into problems starting with InDesign (error code 5 and then say that it was not installed). Acrobat Pro would not accept the serial number, and after that Photoshop and Illustrator arrested for opening and gave error code 150:30.

    Because CS4 is an older version, there is no phone support. I went to the cat. He is not much either, just a parrot who repeats what I said - finally didn't so that he could not help me to «go to the forums» I'm on the forum and help very warmly received with uninstalling, cleaning (CC Cleaner Tool, etc...) and reinstall. They advised me to reinstall to a DMG downloaded from Adobe. I did everything above and it works now very well (at least seems!).

    My only problem is still Acrobat Pro 9 I remember this as a recurring problem over the years (thanks to a previous operating system upgrade). In the past, I was able to get help from Adobe because at that time, he was not as old. I managed to get someone on the phone who helped me darkly that I can't remember or repeat. In the search on Google and forums to research, it's apparently a problem for a lot of other people - but I have not found an answer that works, just a bunch of frustrated people. I have told me (more than once) that the customer service are the only ones who can finally solve the problems associated with the granting of licences or activation/unlocking serial number - which included a second round to try the phone, then cat and now forums. So here I am again!

    Adobe Acrobat 9 Pro has been installed with all of the suite CS4 - both times (first from my drive, (deuxieme from the DMG from Adobe). Not as a stand alone, but the license number seems to treat it as one and does not account for more that it has been installed. I have only a serial number on my disks box, which does not work for Acrobat Pro 9. Initial CS4 installation took this serial number, and since it's a CS2 upgrade - it took and serial number. This is not an option in Acrobat Pro. She asked only a serial number.

    In desperation (since not getting anywhere with Adobe - so far), I downloaded a key Locator, and he finds the serial number for the installation of Acrobat Pro. But it doesn't work anymore. ??? I noticed that the key finder says 'Acrobat 9.0' not 'Acrobat Pro 9.5.5' as in my applications folder (it is fully updated today - even if I can't open it). I manually applied all the updates to CS4 - as programs no longer work on the newer operating system. There were 23 patches for Acrobat Pro and it took a lot of time to work through the process, so not looking forward to it once again!

    I've exhausted most of the tips and troubleshooting tips. I contacted as many sources as I can. I spent more than a week (full time) on this 'project' to date.

    What we are supposed to do? We cannot use Time Machine either, it screws everything up by other means...

    Help, please!

    (I have no hair left out...)

    I went through a lot of stages, misadventures, installs them, reinstall. But I finally solved my problems.

    The final installation resolved all the issues with the error: 6 / error: 5 / error: 150:30 and above all, the problem with Acrobat 9 Pro accepts only not my key. It was mostly with my original installation disk, since the beginning of time. I've been lucky (and persistent) enough in the past to get people help me tech workaround. Now, you're on your own - with the help of the forum!

    I probably wrote what has worked under the wrong subject (it was actually an update of a forum member who helped me).

    So I post it here too, just in case someone else is having a similar problem... and to answer myself. ) I like to wrap things!

    I don't know that I've mentioned before... but something else that could make a small difference, was that Java has been pre-installed by the third CS4 install. It was installed after the 2nd installation of CS4 and I don't take her away after having served all things Adobe (as described below).

  • Adobe XI Pro will not accept serial number

    I bought a copy of Adobe Pro XI.  When I try to save the serial nuber (i.e. Adobe provided and is saved for me on my account belonging to this software as Adobe) installation of "wizrd" says it is not valid for this product!

    What can I do to get this straightened out?

    You can use a serial number of windows and therefore need to exchange a platform.

    Contact adobe support, https://helpx.adobe.com/contact.html

  • iPhone 5 c will not notify a number only

    My daughter recently received a new iPhone 6 s.  Since that time, my iPhone 5 c don't notify me with noise or vibration when I get a text from her.  Others she say their iPhones signal them as usual and my phone tells me for all that I get texts from texts.  I went into my contacts to be course he said no 'none' for his texts, and he says 'default '.  I tried to change his tone, but I still don't have the text, but not a signal.

    Does anyone have any ideas as to what could be the cause?

    Thank you

    GmaPeg

    Hello, GmaPeg!

    Thank you to provide details about the issue you are experiencing currently get notifications of your daughter in the Messages application.  I know how it is important for you to be notified when you get a text to it.

    Changing the settings of notification in its contacts on your phone was definitely a great first troubleshooting step.  I have an idea of what might happen with messages of your daughter:

    1. open the Messages app on your iPhone

    2. tap the conversation of your daughter with you

    3. tap on 'Details' top-right

    4. drag the slider of "do not disturb" on the left (out of service)

    Have a fantastic day and you thank for being among the communities Support from Apple!

  • Windows xp will not update [error number: 0x8DDD0018]

    I'm repairing an old laptop with windows xp, but I can't check the xp updates I might need. It gives me this error number: 0x8DDD0018

    Help

    Dennis,

    Is Windows XP Service Pack 2 (SP2) or the SP3 installed?

    You may receive an error message that contains the "0x8DDD0018" code or the code '0 x 80246008' when you try to download the updates on the Microsoft Windows Update Web site or the Microsoft Update Web site

     

    http://support.Microsoft.com/?kbid=910337 >

    The current time and the date now in Baja California, Mexico is 09:00

    Sunday, April 14, 2013
    DST - 0700 UTC
     
    UTC/GMT is 16:00 on Sunday, April 14, 2013
                
    Current weather conditions in San Felipe

    Sunny82 ° F / 28 ° C
  • I reinstalled a lizenced 6 Lightroom on new hardware, but I didn t turn off the first installation. After a crash of the new material I disable couldn t. The new facility now works but Lightroom will not accept serial number because

    No one knows what to do or do I have to contact adobe?

    Contact adobe during the time pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html.  request a reset of count of activation.

  • I am running Vista Home Premium (although upgrade automatic is activated, the system will not install SP1.) Support Ms called and they asked me reinstall the OS. I did and the same problem.) I have Toshiba Satellite laptop. My system does not open the

    How can I open files to .phtml?

    You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the correct help it.

    See you soon. Mick Murphy - Microsoft partner

  • How can I re - install Acrobat 9 Pro from a Master Collection CS4 to a new computer, but I don't want the rest of the collection? The prompt will not accept my serial number.

    I've migrated Adobe Acrobat 9 Pro from an old computer. When I try to run my adobe pdf files, the app invites me to enter a serial number. The number I have is for the CS4 Master Collection. The system will not accept this number. Anyone know what I can do in addition to re-setup of the entire collection (which I don't need)? And how to avoid having to buy a new Acrobat Pro?

    You can not migrate to the installations of the Adobe software from one system to the other, as these applications install plug-ins and various preferences and code in several locations on your system (Windows and Mac OS - and WIndows was also the question of a myriad of registry entries). You must disable it on your old system and installation of support on your new system. There is no shortcut for this. Sorry!

    -Dov

  • SPA-3102 PSTN idle status, will not answer but watch sounds.

    Greetings,

    I am a complete newbie in the world of voip. I have an spa3102 and a computer virtual trixbox. When I use my softphone to compose, it makes to the spa3102 (shows the id of the last and gives a status of the appellant voip 'reply') but I get an "all circuits are busy now" and does not change the status of IDLE pstn. It also will not answer the phone for incoming calls to the PSTN.

    Outgoing stuff could be a problem of numbering plan (don't know not just guessing) here it is:

    (S0:xx. <@gw0>)

    I tried the regular (or default) (xx).

    incoming calls are supposed to go to a handset on my desk, for example ext 101 is the dial plan: (S0:101@internalip)

    I can't see the forest for the trees. Can someone give me some advice on where to look. I'm completely puzzled by something non-response externally, and why I get a all circuits are busy if there are inactive on the status page.

    an interesting note: If line1 is connected to an analog phone, it will dial a number, but always shows failover for a reason any...

    Thank you very much!!!

    Greetings!

    Thanks for the reply. I do not know if I explained properly (sounds like I don't have). I have a trixbox and I use the SPA in interface with my RTC and I want to have a fax machine (but later) on the FXS port. The problem I have is that I could not field calls to the collection. They would just ring and ring. I thought it was a dial plan (and hope it was not a hardware problem), but he just wouldn't answer the phone. He would show 'Ringing' like the PSTN status, but Voip would be "IDLE". I've been pouring through the guide of the administrator, forum messages for about 2 weeks now.

    But I didn't know what the problem was. The spa3102 is waiting until she can establish a connection (with the internal phone system) until it meets the PSTN. This is why it continues to ring. The problem why it shows it is inactive and (even with enabled full logging to a syslog box) no traffic to SIP the trixbox internal... because I had the port internal plugged in... not the WAN port (or internet). Thats right... silly me...

    I gave the wan port an address on the same subnet and moved the cable to it, once I could talk to her I change address internal to something even not on my network (if no routing problem) and left the network adapter disconnected (internal nic). Then I changed the wan to the old internal address address (trix trunk was already configured in this ip address anyway...) and PRESTO! I tried calling the number RTC and started to receive log entries showing the sip signaling and he's trying to route the call to the box of trix. It works now! So he was not answering the phone in my case, because it could not connect to the pbx or the ip phone and that because I don't use the WAN/INTERNET port on my SPA. Something I don't remember seeing in the textbooks as a "hafto' or a 'must '... I might have forgotten that of course, but I don't remember seeing him there.

    So if you enable logging, and then call this number (I used the PuTTY and 'tail-f /var/log/spa3102.log"to see the entries that they light up the box of syslog) and you don't see any sip traffic, it could be that you must use the WAN/INTERNET port instead of the internal port apparently logical... BE sure THAT ENABLE YOU REMOTE ADMIN if you decide to give it a shot.

    Also you can do the spa to answer the phone, even if it has no where to send the call (or if you want incoming people to use a PIN) on the GATEWAY PSTN - VOIP, there is a setting "off hook during the VOIP call" (default = no), but change that Yes - he would answer... and then sit there... If I had a PIN with a dial plan that is associated with this would give a fast busy after the entry of the PIN. BUT now everything is cool!

    Thank you!

  • Can not dial AOL and broadband is very slow.

    I have a 2 year old Toshiba laptop.  Recently, he has been making slower and slower when it is connected to the internet.  Yesterday he could not dial the number of AOL and said that he had no dial tone.  However, if I listen carefully, I can hear the familiar beep and recording that says "If you want to make a call Please hang up and redial."  (this is what happens when a phone is off the hook)  Anyway, frustrated, I went to my neighbors who have broadband service, and the laptop is slower than molasses when on the internet through their broadband services.  The laptop works at speeds normal when not online.  I tried system restore to an earlier date... no help.  Then I reinstalled the entire system and still can not dial AOL.

    Any help would be appreciated!  :-)

    It is a symptom of severe infection so start by analyzing carefully:

    http://www.elephantboycomputers.com/page2.html#Removing_Malware

    If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). Please be aware that not all shops are skilled at removing malware, and even if they are, your computer may be so infested that Windows will have to be properly installed. If possible, have all your data backed up before taking the machine into a shop.

    MS - MVP - Elephant Boy computers - don't panic!

Maybe you are looking for

  • HP all-in-one 6110xp

    I can send but cannot receive faxes. Tried all over again: troubleshooting. Help

  • White screen powering a Satellite 1130

    I bought a second hand by Satellite 1130 laptop not too long ago and it worked fine for awhile but then it died on me... When I turn on the laptop the power light on the front comes on but nothing else. Laptop computer knows that it is on, as the DVD

  • Satellite P10-804 - Question on new install

    I am wanting to do a clean install on the old Satellite P10 [2004], but I'm a little worried about the updates that I'll have to do.In my view, that he could run in the hundreds. All Tips how do appreciated.

  • Problem with the Canon firmware on 1DX?

    Notice how the camera is turned off. Don't me disagree on CF card because I am using Sandisk 32 GB Extreme Pro 90/Mo/s. Even after the passage of the camera on and outside doesn't change anything, as well as different switching CF cards. Any 1DX user

  • is there one in order to reinstall the drivers on a pressario r3460us?

    I am running XP one a R3460US. In my view, that the laptop should be well cleaned and restored. I have the OS provided w laptop drive. I've also downloaded all the drivers for the R3460. I installed the other drivers on a Dell computer, and they reco