Spa8000 menu voice doesn't recognize tones

Similar Questions

• Gigaframe L80 - Windows doesn't recognize it as a second monitor

  Hello

  I have a Toshiba Gigaframe L80 but is not fully functional.
  Windows doesn't recognize it as a secondary monitor so I can't extend the desktop in the framework.
  Only works in clone mode.

  I tested it on 2 computers according to the manual and the addon, I installed the .NET 2.0 (and 3.0) and I use the software/driver that comes in the box, but it is not recognized and is not shown in display properties.

  Can you help me?
  Is there a driver/software/firmware for the L80 was updated to fix?

  Anyone with the same problem?

  Hello

  I found this info:

  Sub visualization allows the Gigaframe to act as a second monitor for your PC
  To activate the view Sub follow these steps:
  (1) install subview on the laptop.
  (2) in the main menu of gigaframe select settings, then press OK
  (3) select subview and press OK
  (4) select and press OK. Now the Gigaframe is in display Sub mode and is not operable.
  (5) connect the GigaFrame to your PC with the supplied USB cable
  (6) run the subview on your PC software
  (7) the display of Sub pop window, display the current screen display in the gigaframe

  By activating the function void View the willing Gigaframe of two display modes:
  Scope and the Clone mode.

  To assign the suffixe_etendu mode_ Gigaframe follow these steps:
  (1) right click on the desktop and select properties from the menu
  (2) in the display properties panel select the settings tab
  (3) under the view drop-down list, select 2. default monitor on Subview
  (4) check the option extend my Windows desktop on this monitor and the bottom of the settings tab

  Note: in extended mode screen gigaframe becomes your office extensions!

  To set the Gigaframe in _Clone mode_ follow these steps:
  -Uncheck the extent my Windows desktop on this monitor option!

  The gigafmae display the same screen as displayed on the monitor of your PC in Clone mode!

  Love let you subview job function properly, please consider to stop your acceleration DirectX function! _

  If you want to play the video on the Gigaframe, you must select it * as primary monitor! *

• Windows Media Player doesn´t recognize the subtitles on my movies

  Windows Media Player doesn´t recognize the subtitles on my movies

  Hello

   
   
   
  1. what operating system is installed on the computer?
  2. If it works well before?
  3 did you changes to the computer before the show?
  
   
  Method 1: Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  
  Method 2:
  
   
  Follow the steps mentioned below:
   
  (a) open Windows Media Player
  (b) click the game menu, point to lyrics, captions and subtitles, and then click the applicable.
  
  Reference:
   
  Show or hide the menu bar in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows7/show-or-hide-the-menu-bar-in-Windows-Media-Player

• Re-installation of Windows XP doesn't recognize any hard drive - help

  Hello

  I have model X60s: 17044JU

  I installed XP of origin.

  My computer is very slow and I am trying to reinstall XP from my CD (and the HD format so I have everything clean).

  When the blue screen Windows installations appears and loads the drivers etc then it tells me that it doesn't recognize any HDD.

  I thought that I might need the SCSI or RAID drivers, but since I don't have floppy drive I can not load their.

  How to install new XP any help would be appreciated.

  Thank you

  Miron

  Moderator edit: number masked to prevent improper use.

  go to the bios hard drive mode menu switch from ACHI to compatibility.

• Had a project done with first elements 11.  All media files and PRE files were in the same folder on an external hard drive.  Received a new computer, loaded first items 11 (which of course doesn't recognize not all previous projects as it is)

  Had a project done using first items 11 (the file exported and posted on youtube).  All the media files and PRE files associated with this project were located in the same folder on an external hard drive.  Got a new computer, responsible for first 11 elements (which of course doesn't recognize not all previous projects because it is a new installation) and now cannot open the original project to make some adjustments (connected to the external hard drive of course)...  Even tried to open the last saved auto program as well, no luck.  Just get a shell of the original project, but no real media file is passed in. Then get a prompt asking you where the file "rendering-3090026..." (20 More digits) is located.  Looking for C drive and external hard drive without success. Help!

  

  delilah12

  Which operating systems are involved - old and new?

  The external drive has the same drive letter on the new computer as it did when it was used on the other computer?

  Where are the video preview and the old led, Audio preview files compared to new? See Edit Menu/preferences/Scratch discs?

  Are all the place where is the file... messages just to render files? If all are for rendering files, what happens if you click ignore for their

  messages? Can you enter into the project and render it again if necessary and proceed with the project?

  Please see the bulletin. With the above information, we will decide which way to go? It seems that a media disconnect situation has developed in

  the passage from one computer to the other.

  RTA

• iTunes doesn't recognize or not restore iphone 5s

  Monday last iTunes stopped recognizing my iPhone 5 s when I plug it to my PC. This also means that it doesn't connect on wifi for my iPad to use hand-off.

  I tried to reinstall iTunes and update iTunes and the phone. I also tried to restore the phone but iTunes doesn't recognize even in recovery mode. I tried to reset the network settings and nothing has worked.

  I don't want to take it to my local dealer because one of the guys he has messed up my old iPhone 5 and I configured on the wrong carrier after giving me 2 messed up phones under warranty.

  Erase all content and settings to fix this or am I just stuck with a phone that does not work with my other devices?

  I thought I had tried all the tips listed before but have not seen the thing on Device Manager. Now it works again.

• Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Did you see if the ideas presented in the response of this other thread can help?

  Multiport USB - C map update will not install

  A few usual ideas, reset SMC, the NVRAM reset, start in safe mode; VR;

  the kitchen sink; wash the cat... burning incense. I would try a variety of things!

• My Acer Aspire v 17 Nitro Black edition doesn't recognize my built in camera

  My Acer Aspire v 17 Nitro Black edition doesn't recognize my built in camera. And also on Device Manager I do not find the Image device where I should find the camera

  Hello...

  If you have already tried the factory reset, it might be a hardware problem with the webcam. In this case, you will have to send the laptop for repair.

• I play with my lap top and accidentally decliques the network to which the computer used, now when I login it doesn't recognize me, I can't even on the desktop to fix

  Microsoft windows xp professional

  Ctrl alt del to access

  and then type the password

  doesn't recognize me any more that I décliqués the wrong box to change the settings of the home network

  Hello
  
  1. is your computer connected to a domain?
  
  If your computer is connected to a domain environment I would ask you to contact the administrator of the computer.
  Your journal Id and password is checked on the network, since you are not able to connect to the network it is why you are unable to connect.
   
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Fuze doesn't recognize the MPEG-4 audio layer - any suggestions?

  Fuze doesn't recognize the MPEG-4 audio layer - any suggestions?

  I have loaded a series of MPEG-4 audio layer files on my rocket. I can see them on the "rocket" when I consider my computer but not the "rocket" itself.

  Anyone know what I'm doing wrong?

  Thank you

  Donn

  The Sansa times .mp3, .wma. OGG, FLAC and .wav. It cannot decode m4a or mpeg-4.

  Are downloads of iTunes? Apple doesn't want read you elsewhere on your computer and whatever this dopI little pocket music player they do is called?   M4a and .aac are owners of Apple formats.

  You must extract these files from CDs in mp3, or if you do not have CD you will need to convert m4a to mp3. Download the free media encoder and conversion (transcoding) these files mp4 to mp3 high quality, 192 Kbps or higher. If you use more low-quality mp3 will save you space, but the sound quality will suffer.

  And if you use iTunes to rip a CD, you can change the settings (in Edition/Preferences/Advanced/import music, which differs from the advanced visible tab) to mp3 instead of m4a files when rip you.

  If your files are m4p, the p is for protégés who are protected against copying the files, which means that you're not supposed to move on another device.  The only way to convert is to go into the underground world of pirate.

• my computer doesn't recognize my usb device and mouse

  MY COMPUTER DOESN'T RECOGNIZE THE DEVICE USB AND MOUSE IT NOT THERE NO COMMUNICATION BETWEEN THE COMPUTER AND THE MOUSE ALSO COMPUTER AND PORTABLE USB

  Thank you

  You must indicate what is the brand of mouse and the model? Whjat transponder type does the mouse have? The mouse has ever worked? Your laptop has 4 USB ports. No device works in one of the ports?

  The USB FLASH DRIVE is recognized if plug you it into a USB port on a different computer com?

• My 2 minute video of camera kodak registration has an .mov extension there. Director of Windows doesn't recognize. Quik time player someone. How can I create a small movie of 2 minutes with video and still images

  How to create a movie with Windows movie maker, it doesn't recognize a small video with the extension. My camera kodak MOV.  Windows Media will play sound only.   Quik time player shows video & sound, but it seems to change you must buy software Quik Time.  Is there something that recognizes. MOV and is free?

  If you convert the .mov file to .wmv format
  You should be able to open it in Movie Maker.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• My Sony vio laptop doesn't recognize USB storage?

  My Sony vio laptop doesn't recognize USB storage?

  Is it a USB 'ding' heard when you insert the USB storage device?  If so, you then have to make right click on my computer, select manage, then disk management, look on the right side and the storage of the assign a drive letter.

• My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive.

  Original title: CDs? DVD not recognized

  My laptop (Windows 7) doesn't recognize CD or DVD when inserted in the drive.  No error message does nothing! ???

  Sorry my bad https://support.microsoft.com/en-gb/mats/cd_dvd_drive_problems/en-us , Ric (I've corrected the link as well)

• PC doesn't recognize me as the administrator

  Separated from this thread.

  my windows 8.1 PC doesn't recognize me as the administrator. I can't make changes on my PC settings. Whenever I just pushes the button, it flashes and does not go to the program, including the store.

  Hello

  Please refer following fix and tell us if it helps:

  http://www.thewindowsclub.com/lost-administrative-rights-in-Windows

  Hope this helps, good luck :)