SPA9000 Call Park
Can anyone here explain the functioning of the Park on the SPA9000 appeal? I need the opportunity to put a call on hold and have another extension to take the call. If someone could walk me through the steps of a parking call and pick up on another post, I would appreciate it.
Go to linksys.com/kb and are looking for Answer ID 5238 or copy and paste this one ... http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5238&p_created=11688.
Tags: VoIP Adapters
Similar Questions
-
Windows 7 - Disable CPU Core Parking, it works.
I recently heard of a technical guy on Windows 7, it is features that call parking core, which would be activated / deactivated your processor from time to time. And that's the main cause you're system is the momentary lock and lock upward for some time, that happened when the core parking and discount is trigger.
For observed if you are affected, you can open the task, goto performance manager, then open resource manager.
then in the CPU tab, you will see some of your hearts are stationed, and they would be parked / unparked from time to time.
What I would like to ask is, if someone knows its safe or not to turn it off and succeeded, after doing so.
Here are the steps that I got from this guy, although I found that it is very difficult.
http://Forum.cakewalk.com/TM.aspx?m=1852473
http://Forum.cakewalk.com/TM.aspx?m=1861804
http://ultimatecomputers.NET/forum/viewtopic.php?f=7&t=3644
In addition, finally, will be this warranty? Thank you.
While my system config is followed:
HP Envy 17
Core i7 720QM
ATI Mobility Radeon HD 5850 graphics card
Window 7 64 bit
8 GB Ram
Kind regards
Antony LeeExactly how you see a kernel as "parked" in the resource monitor?
No it will not void the warranty, and seems to be a safe method.
-
Configure incoming calls to route to the internal unit
I have a Cisco 2921 router which has a 4 FXO inside card. I would like to configure so that ALL incoming calls on all 4 ports to be forwarded to a post internal (1001), it is a test environment and I can't seem to understand what Miss me. The config is below:
Building configuration...
Current configuration: 8500 bytes
!
! Last configuration change at 08:19:46 EST Friday, March 1, 2013 by sjones
!
version 15.1
horodateurs service debug datetime msec localtime
Log service timestamps datetime msec localtime
no password encryption service
sequence numbers service
!
hostname WH-VOIP-2900
!
boot-start-marker
boot-end-marker
!
!
logging buffered 10000000
!
AAA new-model
!
!
AAA authentication login default group Ganymede + local line
/NOAUTH AAA authentication login no
default AAA authorization exec group Ganymede + local no
/NOAUTH AAA authorization exec no
orders accounting AAA 15 by default start-stop Ganymede group.
Default connection accounting AAA power Ganymede group.
!
!
!
!
!
AAA - the id of the joint session
!
clock timezone IS - 5 0
summer time clock IS recurring
!
No ipv6 cef
IP source-route
IP cef
!
!
!
!
!
no ip domain search
IP domain name mgsd.edu
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
!
FXO trunk group
!
Crypto pki token removal timeout default 0
!
Crypto pki trustpoint TP-self-signed-3979560690
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 3979560690
revocation checking no
!
!
TP-self-signed-3979560690 crypto pki certificate chain
certificate self-signed 01
308201B 6 A0030201 02020101 3082024D 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 33393739 35363036 6174652D 3930301E 170 3130 31323232 31333533
30375A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 33 39373935 65642D
36303639 3030819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100DD47 9227149F 2D084CE5 3 D 7DBF4FCA 227595 C3519000 3F468821 D56F653A
E74FCBAD B4936598 F0C26B2B 6132ADE7 1B1BDC89 44D3C53F 63DDAF78 8E08FCA7
7044095A DBE38889 7CD 48871 94ED1CF9 F2ECC50A 8BD21AFC 5BC3B3FC B322E161
F3CE339A 88AA803B E3705349 03A7D918 C11E5844 ECF039EB FEC44CDF 52A59AE5
0C 430203 010001A 3 75307330 1 130101 FF040530 030101FF 30200603 0F060355
551 1104 19301782 1557482D 564F4950 2 D 302E6D67 323930 73642E65 6475301F
23041830 16801463 9BA90049 2F6005DC F2A35FC3 0EDB2530 0603551D 4138 329D
1 D 060355 1D0E0416 0414639B A900492F 6005DCF2 A35FC332 9D41380E DB25300D
06092A 86 01010405 00038181 005C2C45 9F687AEF 3219F567 337E55CD 4886F70D
9E524A1B 7879B3B1 F3C872F9 DFF7F014 FFE0D84B 67252EFE 3DFF8959 9565ADE2
79857E34 FFF2C3DE 667D5D62 8A4E4690 D874CF4A 8B 180832 7748D1E8 BB71543B
BC404126 02DABACB DDF24EE6 6F63F8CE F7F8494C 66115C B768BC77 DA2D5C2C 77
984DC376 A16F2B81 D1CBD44F F23B8605 D4
quit smoking
voice-card 0
DSP services dspfarm
!
!
!
voip phone service
h323 connections allow h323
allow connections h323 to SIP
allow connections sip h323
allow sip to sip connections
redirect ip2ip
Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
H323
!
voice class codec 1
g711ulaw codec preference 1
codec preference 2 g729r8
!
vocal h323 class 1
H225 timeout tcp establish 3
Call slow start
prerogative of the call
!
!
!
!
!
license udi pid CISCO2921/K9 sn FTX1448AJ6B
HW-module pvdm 0/0
!
!
!
username admin privilege 15 secret 5 $1$ iKc / $uQJli0iQG9VAu4PiFeYC8 /.
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
Description inside LAN
IP 10.40.0.51 255.255.0.0
automatic duplex
automatic speed
H323-gateway voip interface
H323-gateway voip bind port 10.40.0.51
!
interface GigabitEthernet0/1
no ip address
Shutdown
automatic duplex
automatic speed
!
interface GigabitEthernet0/2
no ip address
Shutdown
automatic duplex
automatic speed
!
IP forward-Protocol ND
!
IP http server
local IP http authentication
IP http secure server
IP http timeout policy slowed down 60 life 86400 request 10000
!
IP route 0.0.0.0 0.0.0.0 10.40.0.1
!
!
!
!
!
!
SNMP-Server RO community mgsdvoip
SNMP-Server RO community mhsswitch
location of Server SNMP "Mooresville High School"
Server enable SNMP traps snmp authentication linkdown, linkup warmstart cold start
Enable SNMP-Server intercepts ATS
Server enable SNMP traps eigrp
Enable SNMP traps envmon fan supply temperature State of the server stop
Server enable SNMP traps insertion withdrawal flash
SNMP-Server enable traps energywise
Server enable SNMP traps cef resources-failure-change of State peer peer-fib-state-change inconsistency
Server enable SNMP traps config-copy
config SNMP-server enable traps
Server enable SNMP traps config-ctid
entity of traps activate SNMP Server
Server enable SNMP traps hsrp
Enable SNMP-server holds the CPU threshold
Server enable SNMP traps syslog
Server enable SNMP traps vtp
Server enable SNMP traps srst
SNMP-Server enable traps voice
SNMP-server host 10.65.0.252 version 2 c mgsdvoip
SNMP-server host 10.10.0.252 version 2 c mhsswitch
RADIUS-server host 10.60.253.10 key Pa$ $word
RADIUS-server application made
!
!
control plan
!
!
voice-port 0/0/0
1 FXO-group of circuits
connection ÉRA 1001
Description 704-799-0516
!
voice-port 1/0/0
2 FXO-group of circuits
connection ÉRA 1001
!
voice-port 0/0/2
3 FXO trunk-group
connection ÉRA 1001
!
voice-port 0/0/3
4 FXO-group of circuits
connection ÉRA 1001
Description ==> 911
!
!
!
SCCP local GigabitEthernet0/0
SCCP ccm 10.65.0.63 identifier 1 version7.0
SCCP
!
SCCP ccm Group 1
link interface GigabitEthernet0/0
associate the profile 1 WH-2900_CFB register
the associated profile 2 registry WH-2900_MTP
!
dspfarm profile Conference 1
Codec g711ulaw
Codec g711alaw
Codec g729ar8
Codec g729abr8
Codec g729r8
Codec g729br8
maximum sessions 4
associate the PCRS application
!
dspfarm profile 2 PSG
Codec g711ulaw
maximum sessions 2 material
associate the PCRS application
!
voice POTS dial-peer 1
trunkgroup FXO
incoming called-number.
!
Dial-peer voice 2 pots
destination-model 9 [2-9] 11
Setup progress_ind allow 3
alert progress_ind activate 8
progress_ind enable progress 8
port 0/0/3
Forward-digits 3
!
Dial-peer voice 3 pots
destination-model $ 911
Setup progress_ind allow 3
alert progress_ind activate 8
progress_ind enable progress 8
port 0/0/3
Forward-digits all the
!
Dial-peer voice 4 pots
trunkgroup FXO
destination-model 9 [2-9]... [2-9]......
Setup progress_ind allow 3
alert progress_ind activate 8
progress_ind enable progress 8
Forward-digits 10
!
voice pots Dial-peer 5
trunkgroup FXO
destination-model 91 [2-9]... [2-9]......
Setup progress_ind allow 3
alert progress_ind activate 8
progress_ind enable progress 8
Forward-digit 11
!
Dial-peer voice 6 pots
trunkgroup FXO
destination-style 9011T
Setup progress_ind allow 3
alert progress_ind activate 8
progress_ind enable progress 8
prefix 011
!
Dial-peer voice 32 pots
trunkgroup FXO
composition of 4-digit SRST Description to other sites
destination-model 2...
Forward-digits all the
prefix 704658
!
Dial-peer voice 100 voip
preference 1
destination-model [2]...
Setup progress_ind allow 3
progress_ind connect enable 8
progress_ind disconnect switch 8
session target ipv4:10.65.0.23
codec voice-class 1
h323 voice-class 1
DTMF-relay h245 alphanumeric
rate of 14400 Fax
IP qos dscp cs5 signaling
No vad
!
Dial-peer voice voip 101
preference 2
destination-model [2]...
Setup progress_ind allow 3
progress_ind connect enable 8
progress_ind disconnect switch 8
session target ipv4:10.65.0.63
codec voice-class 1
h323 voice-class 1
DTMF-relay h245 alphanumeric
rate of 14400 Fax
IP qos dscp cs5 signaling
No vad
!
!
!
!
access controller
Shutdown
!
!
Call-Manager-emergency
secondary-tone 9
MAX conferences 4-6 win
transfer full-consult system
3 timeouts interdigit
IP source address 10.40.0.51 port 2000
Max-joined 50
Max - dn 100 double line
primary phone message system is offline
secondary system message standalone
1 7046582 model numbering plan... extension-length 4
transfer-model. T
KeepAlive 10
voicemail 2525
call-Park select non-auto-match
ground of appeal forwards. T
call forward availability 97046582525
timeout before call 97046582525 16 noan
aa-mm-dd date format
!
!
VM integration
direct model * GNC
peer-to-peer of nonresponse 5 FDN of mires * GNC *.
peer-to-peer busy 7 FDN of mires * GNC *.
safe-to-post non-response 4 FDN of mires * GNC *.
safe-to-position 6 FDN of mires * GNC *.
!
!
Line con 0
password V01pG8te
line to 0
line vty 0 4
access-class 23 in
privilege level 15
password V01pG8te
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
password V01pG8te
transport input telnet ssh
line vty 16 1114
transport of entry all
!
Scheduler allocate 20000 1000
NTP 129.6.15.29 Server
end
Jeff,
I guess that 100 & 101 voip dial peers point to a CuCM?
The destination model on the voip dial peer does not 1001 on the ERA and they must change to something like: -.
Dial-peer voice voip 101
voice mail Dial 100
destination-model [12]...
voice mail Dial 101
destination-model [12]...
destination-model [2]...
Hope this helps,
Craig
PLEASE EVALUATE THE MESSAGES USEFUL
-
Access gui Cisco 2811 v7.0.4 w/AIM-CUE
Hello
We are running an older router which works fine for our needs, as indicated in the subject. I am trying to access the graphical interface for the AIM - CUE and am unable to. I can access the ccme.html to the router, but that is not integrated with the function of automatic monitoring, nor there of our current configuration info. I added a route to the QUEUE of the command prompt and I am able to ping and the ip address of the QUEUE to access from a browser, but it points to builtin of the 2811 CCME or CCP. Any help anyone could offer would be greatly appreciated. Thanks in advance for your help. Please find the config for the router and the GUIDE below.
Router:
Router#sh running-config
Building configuration...
Current configuration : 12555 bytes
!
! Last configuration change at 20:19:49 CDT Sat Oct 26 2013 by GlennP
! NVRAM config last updated at 20:06:24 CDT Sat Oct 26 2013 by cmeadmin
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging discriminator ENV severity drops 4 facility drops ENVMON mnemonics drops
FAN_LOW_RPM
logging buffered discriminator ENV 4096
logging console discriminator ENV
logging monitor discriminator ENV
enable secret 5 $1$nCKH$KBDP9dCX10xvqP98Ucm5u/
!
no aaa new-model
clock timezone CST -6
clock summer-time CDT recurring
!
dot11 syslog
ip source-route
!
!
ip cef
ip dhcp excluded-address 172.22.1.154
ip dhcp excluded-address 172.22.1.200
!
ip dhcp pool Voice
network 172.22.1.0 255.255.255.0
default-router 172.22.1.154
option 150 ip 172.22.1.154
!
!
ip name-server 4.2.2.2
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
!
!
trunk group FXO
!
!
!
!
voice hunt-group 1 parallel
list 101,102,103,104,105,106,107
timeout 60
pilot 200
!
!
!
!
!
voice-card 0
!
!
crypto pki trustpoint TP-self-signed-4121280238
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-4121280238
revocation-check none
rsakeypair TP-self-signed-4121280238
!
!
crypto pki certificate chain TP-self-signed-4121280238
certificate self-signed 02
3082023E 308201A7 A0030201 02020102 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 34313231 32383032 3338301E 170D3133 31303237 30313035
34375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D34 31323132
38303233 3830819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100C0A7 8EB7F49F C57776E1 9CD28DF9 F3EDF876 BB02405F 1DF7B345 319C419A
23C7D891 28F496B4 675D290C 60FAE2F4 6730D680 655DD0B5 61E64C72 2B73599A
A5567091 499FD933 646168FD 4E730B8C C1079AC5 7327B695 10ED4D76 2D931584
DDA2B93B 6681E10D C82F2ABB 9DB055C8 D157EACE AB19335C B172C3E3 D8EF8452
34E90203 010001A3 66306430 0F060355 1D130101 FF040530 030101FF 30110603
551D1104 0A300882 06526F75 74657230 1F060355 1D230418 30168014 ADD5749E
6A87B4CF 22F924BE 400851F6 B9F8412A 301D0603 551D0E04 160414AD D5749E6A
87B4CF22 F924BE40 0851F6B9 F8412A30 0D06092A 864886F7 0D010104 05000381
81004F81 D08AC0B6 41AAEA8B 35CAC6AF BC07DBF9 9CA42AF1 782BBCE9 1CBB68B6
0AD5A177 664FDFA0 079A5C76 29FB06B2 5760445F 8468F04B B6A37A39 32F8F079
DB6302FE 1792547D 199922B0 907C0CCA 1FD3C322 F7B70E7C 594E96F1 DE283C2A
B7313614 A028D7FF 96E9F047 79162805 4C1CA86F 0232BF0E 0A0659F5 24B7EEDA D5AE
quit
!
!
license udi pid CISCO2811 sn FTX1030A49Q
username cmeadmin privilege 15 password 7 08721D1D5C4854424A
username GlennP privilege 15 password 7 115A485642435A595C
!
!
no ip ftp passive
ip ftp source-interface FastEthernet0/0
ip ftp username cmeadmin
ip ftp password 7 091F1F5A4C54464753
!
!
!
!
!
interface FastEthernet0/0
ip address 10.1.1.146 255.255.255.0
duplex auto
speed auto
!
interface Service-Engine0/0
ip unnumbered FastEthernet0/1.1
service-module ip address 172.22.1.155 255.255.255.0
service-module ip default-gateway 172.22.1.154
!
interface FastEthernet0/1
ip address dhcp
duplex auto
speed auto
!
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 172.22.1.154 255.255.255.0
!
ip forward-protocol nd
!
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
!
ip route 0.0.0.0 0.0.0.0 10.1.1.30
ip route 172.22.1.155 255.255.255.255 Service-Engine0/0
!
!
!
tftp-server flash:phone/7940-7960/P00308000500.bin alias P00308000500.bin
tftp-server flash:Desktops/320x212x12/CampusNight.png
tftp-server flash:Desktops/320x212x12/CiscoFountain.png
tftp-server flash:Desktops/320x212x12/MorroRock.png
tftp-server flash:Desktops/320x212x12/NantucketFlowers.png
tftp-server flash:Desktops/320x212x12/TN-CampusNight.png
tftp-server flash:Desktops/320x212x12/TN-CiscoFountain.png
tftp-server flash:Desktops/320x212x12/TN-Fountain.png
tftp-server flash:Desktops/320x212x12/TN-MorroRock.png
tftp-server flash:Desktops/320x212x12/TN-NantucketFlowers.png
tftp-server flash:Desktops/320x212x12/Fountain.png
tftp-server flash:Desktops/320x212x12/CiscoLogo.png
tftp-server flash:Desktops/320x212x12/TN-CiscoLogo.png
tftp-server flash:Desktops/320x212x12/List.xml
tftp-server flash:gui/admin_user.html alias admin_user.html
tftp-server flash:gui/admin_user.js alias admin_user.js
tftp-server flash:gui/CiscoLogo.gif alias CiscoLogo.gif
tftp-server flash:gui/Delete.gif alias Delete.gif
tftp-server flash:gui/dom.js alias dom.js
tftp-server flash:gui/downarrow.gif alias downarrow.gif
tftp-server flash:gui/ephone_admin.html alias ephone_admin.html
tftp-server flash:gui/logohome.gif alias logohome.gif
tftp-server flash:gui/normal_user.html alias normal_user.html
tftp-server flash:gui/normal_user.js alias normal_user.js
tftp-server flash:gui/Plus.gif alias Plus.gif
tftp-server flash:gui/sxiconad.gif alias sxiconad.gif
tftp-server flash:gui/Tab.gif alias Tab.gif
tftp-server flash:gui/telephony_service.html alias telephony_service.html
tftp-server flash:gui/uparrow.gif alias uparrow.gif
tftp-server flash:gui/xml-test.html alias xml-test.html
tftp-server flash:gui/xml.template alias xml.template
tftp-server flash:ringtones/Analog1.raw alias Analog1.raw
tftp-server flash:ringtones/Analog2.raw alias Analog2.raw
tftp-server flash:ringtones/AreYouThere.raw alias AreYouThere.raw
tftp-server flash:ringtones/AreYouThereF.raw alias AreYouThereF.raw
tftp-server flash:ringtones/Bass.raw alias Bass.raw
tftp-server flash:ringtones/CallBack.raw alias CallBack.raw
tftp-server flash:ringtones/Chime.raw alias Chime.raw
tftp-server flash:ringtones/Classic1.raw alias Classic1.raw
tftp-server flash:ringtones/Classic2.raw alias Classic2.raw
tftp-server flash:ringtones/ClockShop.raw alias ClockShop.raw
tftp-server flash:ringtones/DistinctiveRingList.xml alias DistinctiveRingList.xm
l
tftp-server flash:ringtones/Drums1.raw alias Drums1.raw
tftp-server flash:ringtones/Drums2.raw alias Drums2.raw
tftp-server flash:ringtones/FilmScore.raw alias FilmScore.raw
tftp-server flash:ringtones/HarpSynth.raw alias HarpSynth.raw
tftp-server flash:ringtones/Jamaica.raw alias Jamaica.raw
tftp-server flash:ringtones/KotoEffect.raw alias KotoEffect.raw
tftp-server flash:ringtones/MusicBox.raw alias MusicBox.raw
tftp-server flash:ringtones/Piano1.raw alias Piano1.raw
tftp-server flash:ringtones/Piano2.raw alias Piano2.raw
tftp-server flash:ringtones/Pop.raw alias Pop.raw
tftp-server flash:ringtones/Pulse1.raw alias Pulse1.raw
tftp-server flash:ringtones/Ring1.raw alias Ring1.raw
tftp-server flash:ringtones/Ring2.raw alias Ring2.raw
tftp-server flash:ringtones/Ring3.raw alias Ring3.raw
tftp-server flash:ringtones/Ring4.raw alias Ring4.raw
tftp-server flash:ringtones/Ring5.raw alias Ring5.raw
tftp-server flash:ringtones/Ring6.raw alias Ring6.raw
tftp-server flash:ringtones/Ring7.raw alias Ring7.raw
tftp-server flash:ringtones/RingList.xml alias RingList.xml
tftp-server flash:ringtones/Sax1.raw alias Sax1.raw
tftp-server flash:ringtones/Sax2.raw alias Sax2.raw
tftp-server flash:ringtones/Vibe.raw alias Vibe.raw
tftp-server flash:phone/7940-7960/P00308000500.loads alias P00308000500.loads
tftp-server flash:phone/7940-7960/P00308000500.sb2 alias P00308000500.sb2
tftp-server flash:phone/7940-7960/P00308000500.sbn alias P00308000500.sbn
tftp-server flash:phone/7941-7961/apps41.8-4-1-23.sbn alias apps41.8-4-1-23.sbn
tftp-server flash:phone/7941-7961/cnu41.8-4-1-23.sbn alias cnu41.8-4-1-23.sbn
tftp-server flash:phone/7941-7961/cvm41sccp.8-4-1-23.sbn alias cvm41sccp.8-4-1-2
3.sbn
tftp-server flash:phone/7941-7961/dsp41.8-4-1-23.sbn alias dsp41.8-4-1-23.sbn
tftp-server flash:phone/7941-7961/jar41sccp.8-4-1-23.sbn alias jar41sccp.8-4-1-2
3.sbn
tftp-server flash:phone/7941-7961/SCCP41.8-4-2S.loads alias SCCP41.8-4-2S.loads
tftp-server flash:phone/7941-7961/term41.default.loads alias term41.default.load
s
tftp-server flash:phone/7941-7961/term61.default.loads alias term61.default.load
s
tftp-server flash:CP7905080002SCCP060817A.zup
tftp-server flash:CP7912080003SCCP070409A.sbin
tftp-server flash:ATA030204SCCP090202A.zup
tftp-server exit
tftp-server music-on-hold.au
tftp-server enable
!
control-plane
!
!
voice-port 0/3/0
trunk-group FXO
no battery-reversal
no comfort-noise
connection plar 300
description 715833XXXX
caller-id enable
!
voice-port 0/3/1
trunk-group FXO
no battery-reversal
no comfort-noise
connection plar 300
description 715833YYYY
caller-id enable
!
voice-port 0/3/2
trunk-group FXO
no battery-reversal
no comfort-noise
connection plar 300
description 715833AAAA
caller-id enable
!
voice-port 0/3/3
!
!
!
!
dial-peer voice 100 pots
trunkgroup FXO
destination-pattern 9.T
!
dial-peer voice 800 voip
description VM
destination-pattern 800
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
dial-peer voice 300 voip
description Sterling AA
destination-pattern 300
session protocol sipv2
session target ipv4:172.22.1.155
dtmf-relay rtp-nte
codec g711ulaw
no vad
!
!
sip-ua
mwi-server ipv4:172.22.1.155 expires 86400 port 5060 transport u
!
!
telephony-service
no auto-reg-ephone
max-ephones 40
max-dn 100
ip source-address 172.22.1.154 port 2000
timeouts interdigit 3
system message Sterling Optical #258
load 7960-7940 P00308000500
dialplan-pattern 1 . extension-length 3
voicemail 800
max-conferences 8 gain -6
call-park system application
moh flash:/music-on-hold.au
multicast moh 239.10.16.1 port 2000
web admin system name admin password cisco
dn-webedit
time-webedit
transfer-system full-consult
secondary-dialtone 9
fac custom dpark-retrieval *00
create cnf-files version-stamp 7960 Apr 15 2013 22:15:20
!
!
ephone-dn 1
!
!
ephone-dn 11 dual-line
number 101
name Front 1
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 12 dual-line
number 102
name Front 2
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 13
number 103
name Front 3
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 14
number 104
name Exam Room
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 15
number 105
name Screening Area
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 16
number 106
name Lab
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 17
number 107
name Insurance Office
call-forward busy 800
call-forward noan 800 timeout 10
mwi sip
!
!
ephone-dn 18
number 108
name 7940
!
!
ephone-dn 19
number 109
name Spare1
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 20
number 110
name spare2
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 21
number 111
name Spare1
call-forward busy 800
call-forward noan 800 timeout 70
!
!
ephone-dn 30
number 201
label General VM
description General VM
call-forward all 800
hold-alert 30 originator
!
!
ephone-dn 77
number 777
park-slot timeout 300 limit 2 recall
description Call Park Slot
!
!
ephone-dn 88
number 888
park-slot timeout 300 limit 2 recall
description Call Park Slot
!
!
ephone-dn 99
number 000
mwi off
!
!
ephone-dn 100
number 001
mwi on
!
!
ephone 1
mac-address 0015.62EA.5C58
username "frontdesk1" password cisco
type 7960
button 1:11
!
!
!
ephone 2
mac-address 0015.62B5.DBF6
username "frontdesk2" password cjp44206
type 7960
button 1:12
!
!
!
ephone 3
mac-address 0007.855C.853F
type 7940
button 1:13
!
!
!
ephone 4
mac-address 0017.E001.0940
type 7940
button 1:14
!
!
!
ephone 5
mac-address 0007.8553.2B3C
type 7940
button 1:15
!
!
!
ephone 6
mac-address 0015.C614.A1D1
type 7940
button 1:16
!
!
!
ephone 7
mac-address 0015.F9EC.1EED
username "insurance" password 1234
type 7940
button 1:17
!
!
!
ephone 9
!
!
!
ephone 10
mac-address 0007.8553.2E74
type 7940
button 1:20
!
!
!
ephone 11
mac-address 0019.E855.7616
type 7940
button 1:21
!
!
!
line con 0
line aux 0
line 194
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
login local
transport input telnet ssh
transport output telnet ssh
!
scheduler allocate 20000 1000
ntp master 6
ntp peer 69.164.217.193
ntp peer 204.9.136.253
end
CUE:
Router#service-module service-Engine 0/0 sess
Trying 172.22.1.154, 2194 ... Open
AIM-CUE#
AIM-CUE# sh running-config
Generating configuration:
clock timezone America/Chicago
hostname AIM-CUE
line console
exit
system language preferred "en_US"
ip name-server 4.2.2.2 4.2.2.3
ntp server 172.22.1.154 prefer
software download server url "ftp://127.0.0.1/ftp" credentials hidden "6u/dKTN/h
sEuSAEfw40XlF2eFHnZfyUTSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfG
WTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP"
site name local
site-hostname 172.22.1.154
web credentials hidden "c9yem6kD1vJqrOHVxftjAknfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0n
fGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP"
end site
privilege ViewHistoricalReports create
privilege manage-users create
privilege manage-passwords create
privilege ViewRealTimeReports create
privilege local-broadcast create
privilege broadcast create
privilege vm-imap create
privilege ManagePublicList create
privilege ViewPrivateList create
privilege ManagePrompts create
groupname staff create
groupname Broadcasters create
username GlennP create
username insurance create
username admin create
username cisco create
privilege ViewHistoricalReports description "Privilege to view historical report
s"
privilege manage-users description "Privilege to create, modify, and delete user
s and groups"
privilege manage-passwords description "Privilege to reset user passwords"
privilege ViewRealTimeReports description "Privilege to view realtime reports"
privilege local-broadcast description "Privilege to send local broadcast message
s"
privilege broadcast description "Privilege to send local or remote broadcast mes
sages"
privilege vm-imap description "Privilege to manage personal voicemail via IMAP c
lient"
privilege ManagePublicList description "Privilege to manage public lists"
privilege ViewPrivateList description "Privilege to view private list"
privilege ManagePrompts description "Privilege to create, modify, or delete syst
em prompts"
privilege ViewHistoricalReports operation report.historical.view
privilege manage-users operation user.configuration
privilege manage-users operation user.mailbox
privilege manage-users operation user.password
privilege manage-users operation user.remote
privilege manage-users operation user.pin
privilege manage-users operation system.debug
privilege manage-users operation user.notification
privilege manage-users operation group.configuration
privilege manage-passwords operation user.password
privilege manage-passwords operation user.pin
privilege manage-passwords operation system.debug
privilege ViewRealTimeReports operation report.realtime
privilege local-broadcast operation broadcast.local
privilege local-broadcast operation system.debug
privilege broadcast operation broadcast.local
privilege broadcast operation system.debug
privilege broadcast operation broadcast.remote
privilege vm-imap operation voicemail.imap.user
privilege ManagePublicList operation voicemail.lists.public
privilege ManagePublicList operation system.debug
privilege ViewPrivateList operation voicemail.lists.private.view
privilege ManagePrompts operation prompt.modify
privilege ManagePrompts operation system.debug
groupname Administrators member admin
groupname Administrators member cisco
groupname Broadcasters member admin
groupname staff privilege broadcast
groupname staff privilege local-broadcast
groupname Broadcasters privilege broadcast
groupname staff phonenumber "201"
username insurance phonenumber "107"
username GlennP supervisor designate
restriction msg-notification create
restriction msg-notification min-digits 1
restriction msg-notification max-digits 30
restriction msg-notification dial-string preference 1 pattern * allowed
backup server url "ftp://127.0.0.1/ftp" credentials hidden "EWlTygcMhYmjazXhE/VN
XHCkplVV4KjescbDaLa4fl4WLSPFvv1rWUnfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8Z
ZNgd+Y9J3xlk2B35j0nfGWTYHfmP"
calendar biz-schedule sterling_open
closed day 1 from 00:00 to 24:00
open day 2 from 10:00 to 18:00
open day 3 from 10:00 to 20:00
open day 4 from 10:00 to 18:00
open day 5 from 10:00 to 20:00
open day 6 from 10:00 to 18:00
open day 7 from 09:00 to 17:00
end schedule
calendar biz-schedule systemschedule
open day 1 from 00:00 to 24:00
open day 2 from 00:00 to 24:00
open day 3 from 00:00 to 24:00
open day 4 from 00:00 to 21:00
open day 4 from 22:00 to 24:00
open day 5 from 00:00 to 24:00
open day 6 from 00:00 to 24:00
open day 7 from 00:00 to 24:00
end schedule
ccn application autoattendant aa
description "Sterling Auto-Attendant"
enabled
maxsessions 4
script "aa.aef"
parameter "busClosedPrompt" "AABusinessClosed.wav"
parameter "holidayPrompt" "AAHolidayPrompt.wav"
parameter "welcomePrompt" "AAWelcome.wav"
parameter "disconnectAfterMenu" "false"
parameter "dialByFirstName" "false"
parameter "allowExternalTransfers" "false"
parameter "MaxRetry" "3"
parameter "dialByExtnAnytime" "false"
parameter "busOpenPrompt" "AABusinessOpen.wav"
parameter "businessSchedule" "systemschedule"
parameter "dialByExtnAnytimeInputLength" "4"
parameter "operExtn" "1001"
end application
ccn application ciscomwiapplication aa
description "ciscomwiapplication"
enabled
maxsessions 6
script "setmwi.aef"
parameter "CallControlGroupID" "0"
parameter "strMWI_OFF_DN" "8001"
parameter "strMWI_ON_DN" "8000"
end application
ccn application msgnotification aa
description "msgnotification"
enabled
maxsessions 6
script "msgnotify.aef"
parameter "logoutUri" "http://localhost/voicemail/vxmlscripts/mbxLogout.jsp"
parameter "DelayBeforeSendDTMF" "1"
end application
ccn application promptmgmt aa
description "promptmgmt"
enabled
maxsessions 1
script "promptmgmt.aef"
end application
ccn application sterlingaa aa
description "sterlingaa"
enabled
maxsessions 6
script "sterlingaa.aef"
parameter "Sterling_Sched" "sterling_open"
parameter "Sterling_Hunt" "200"
end application
ccn application voicemail aa
description "Sterling Voicemail by RhinoIT"
enabled
maxsessions 4
script "voicebrowser.aef"
parameter "logoutUri" "http://localhost/voicemail/vxmlscripts/mbxLogout.jsp"
parameter "uri" "http://localhost/voicemail/vxmlscripts/login.vxml"
end application
ccn engine
end engine
ccn reporting historical
database local
description "se-10-1-1-6"
end reporting
ccn subsystem sip
gateway address "172.22.1.154"
mwi envelope-info
mwi sip sub-notify
end subsystem
ccn trigger http urlname msgnotifytrg
application "msgnotification"
enabled
maxsessions 2
end trigger
ccn trigger http urlname mwiapp
application "ciscomwiapplication"
enabled
maxsessions 1
end trigger
ccn trigger sip phonenumber 2000
application "voicemail"
enabled
maxsessions 4
end trigger
ccn trigger sip phonenumber 300
application "sterlingaa"
enabled
maxsessions 6
end trigger
ccn trigger sip phonenumber 800
application "voicemail"
enabled
maxsessions 6
end trigger
service phone-authentication
end phone-authentication
service voiceview
enable
end voiceview
voicemail callerid
voicemail broadcast recording time 300
voicemail default messagesize 240
voicemail notification restriction msg-notification
voicemail mailbox owner "admin" size 775
description "admin mailbox"
end mailbox
voicemail mailbox owner "insurance" size 775
description "insurance mailbox"
end mailbox
end
-Pat
Is not clear what you mean. IP of CUe should put CUE GUI.
-
Hello
I have a dial enough (basic) issue of regime. I need all incoming calls to the PSTN to directly access our standard of Auto number express unit which is currently extension 502. I thought I had set up properly in CME (8.6), but I get a message that the number is not reached. Any help is appreciated as I may have missed something. Here is the abbreviated Config:
Current configuration: 12212 bytes
!
! Last configuration change to 14:11:35 PST Tuesday, August 26, 2014 by routeradmin
! NVRAM config last updated at 14:11:37 PST Tuesday, August 26, 2014 by routeradmin
! NVRAM config last updated at 14:11:37 PST Tuesday, August 26, 2014 by routeradmin
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname voicerouter
!
boot-start-marker
boot-end-marker
!
!
map of type t1 0 0
Select the secret 4 t3Ic8qb5ewMDWvTa4L9l1WMKprop/NnpCj9WtdkqGGc
!
AAA new-model
!
!
AAA authentication login default local
AAA authorization exec local logon
AAA authorization network local logon
!
!
!
!
!
AAA - the id of the joint session
!
clock timezone PST - 8 0
clock to summer time recurring PST
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
!
No ipv6 cef
IP source-route
IP cef
!
!
!
DHCP excluded-address IP 192.168.8.1 192.168.8.19
!
IP dhcp pool owhvoip
network 192.168.8.0 255.255.248.0
default router 192.168.8.1
option 150 ip 192.168.8.1
Rental 30
!
!
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
primary ISDN switch type - or
!
Crypto pki token removal timeout default 0
!
!
voice-card 0
dspfarm
DSP services dspfarm
!
!
!
voip phone service
h323 connections allow h323
allow connections h323 to SIP
allow connections sip h323
allow sip to sip connections
Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none
!
the voice of class custom cptone jointone
Conference of two colors
frequency 600 900
300 150 300 100 300 50 Cadence
!
!
!
!
translation of the voice-rule 1
rule 1 /9400/ /502/
!
voice translation-rule 2
rule 1. * / /5415489400/
!
!
voice translation-profile Inbound_Calls_To_CUE
translate 1 called
!
Local-ILD voice translation-profile
definition of call 2
!
!
license udi pid CISCO2911/K9 sn FTX1641AHX3
HW-module pvdm 0/0
!
HW-module sm 1
!
!
!
username routeradmin password 7 091649040910450B 41
username privilege 15 password 7 cmeadmin 03104803040E375F5E4D5D51
!
redundancy
!
!
!
!
controller T1 0/0/0
long CableLength 0dB
time intervals PRI - Group 1-10, 24
!
security of the zone of confidence
the internet security zone
zone-pair security trusted internet source of internet destination
zone-pair source security not reliable-is trust internet destination trust
!
!
!
!
!
!
!
interface Loopback0
IP 192.168.17.1 255.255.248.0
!
the Embedded-Service-Engine0/0 interface
no ip address
Shutdown
!
interface GigabitEthernet0/0
Description Internet
DHCP IP address
no ip redirection
no ip proxy-arp
Shutdown
automatic duplex
automatic speed
!
interface GigabitEthernet0/1
IP 192.168.8.1 255.255.248.0
automatic duplex
automatic speed
!
interface GigabitEthernet0/2
no ip address
Shutdown
automatic duplex
automatic speed
!
interface Serial0/0/0:23
no ip address
encapsulation hdlc
primary ISDN switch type - or
ISDN incoming-voice
No cdp enable
!
the integrated-Service-naturel1/0 interface
IP unnumbered Loopback0
the ip address of the service module 192.168.17.2 255.255.248.0
! Application: CUE running on NME
Service-module ip default gateway - 192.168.17.1
No keepalive
!
IP forward-Protocol ND
!
IP http server
local IP http authentication
no ip http secure server
IP http path flash:/cme-gui-8.6.0
!
IP route 192.168.17.2 255.255.255.255 integrated-Service-naturel1/0
!
!
!
!
!
!
flash TFTP server: apps31.9 - 3 - 1ES26.sbn
Flash: term31.default.loads TFTP server
flash TFTP server: SCCP31.9 - 3-1 SR 4 - 1s .loads
Server TFTP flash: jar31sccp.9 - 3 - 1ES26.sbn
flash TFTP server: dsp31.9 - 3 - 1ES26.sbn
Server TFTP flash: cvm31sccp.9 - 3 - 1ES26.sbn
flash TFTP server: cnu31.9 - 3 - 1ES26.sbn
!
!
!
control plan
!
!
voice-port 0/0/0:23
!
!
!
profile MGCP default
!
SCCP local GigabitEthernet0/1
SCCP ccm 192.168.8.1 identifier 1 version4.0
SCCP
!
SCCP ccm group 15
associate the ccm 1 priority 1
register the associated profile 1 CFBOWH
attempts of KeepAlive 5
!
Dial-peer voice voip 500
destination-model 5...
session protocol sipv2
session target ipv4:192.168.17.2
SIP DTMF-relay-notify
Codec g711ulaw
No vad
!
voice pots Dial-peer 10
translation-profile entering Inbound_Calls_To_CUE
!
Dial-peer voice 20 pots
translation-profile outgoing Local-LTD
destination-style 9...
port 0/0/0:23
!
!
!
!
access controller
Shutdown
!
!
phone service
Protocol ipv4 mode
conference material
Department of Health-folder-buffer 90
No auto-reg ephone
authentication credentials cmeadmin tshbavsp$ $4
Max-joined 50
Max - dn 200
IP source address 192.168.8.1 port 2000
dnis dir-search service
delays of transfer-reminder 30
Oregon's wild harvest message system
URL of http://192.168.17.2/voiceview/common/login.do services
URL authentication http://192.168.8.1/CCMCIP/authenticate.asp
location of the cnf file flash:
load 7931 SCCP31.9 - 3-1 SR 4 - 1s .loads
zone schedule-5
time format 24
voice mail 500
MAX conferences 8-6 win
application of system call-Park
ground of appeal forwards. T
Department of health flash: / moh.wav
Web admin system name cmeadmin secret $5 1$60ro$u.0r/cno/OD2JmtvPq4w9.
DN-webedit
transfer-figures-collect-orig-call
transfer full-consult system
transfer-model. T
Standard AEC
create the files-cnf version-stamp 7960 26 August 2014 12:49:29Hello
Can you try to add your pots peers 10 dial
!
voice pots Dial-peer 10
/ / DESC * MATCH INCOMING CALLS *.
translation-profile entering Inbound_Calls_To_CUE
incoming called-number.
port 0/0/0:23
!Then repeat the test
Concerning
Alex -
Beginner question - if else statement
I know that noting on JavaScript. I created a form. A field is called 'Parking' and the user can select from a drop-down menu "Couple" or "Single".
The next field is titled "fees". I need this field to auto-complete.
If Parking = Couple, then fees = $150.00
Any other fees = $125.00
I hope that my thinking is correct. If the user selects the Couple in the Parking drop the cost field will be filled automatically at $150.00. If the Couple is not enabled (i.e. Single would be) then charges will be filled with $125.00.
What is the adobe javascript just to add in the field for the "Tax" field properties
Thank you for your help with this. As you can see, I'm a complete newbie to this.
Galen
JS is case-sensitive. Your domain name is 'parking' is not 'Parking', as it appears in the script. This would cause the script to fail.
I recommend first test it in Acrobat and make sure that you have the option to display the console on errors and warnings (under Edit - Preferences - JavaScript), because this would make it immediately obvious that there is a problem.
-
Stock Adobe watermark not removed after licenseing images in the library.
I added several images for my first Pro CC project (2015). The client likes to change it, so I went back to concede the images to remove the watermark. The licenses of images in my library just right and my monthly statement of image is reduced by one. However, the image in my project still has the watermark. Only way I can remove it is add the newly authorized version tot eh project, replace the images and then delete the original image of the water - a marked. I thought that once I have a license of the image in the library of my projects were supposed to be updated automatically? What I take this manual step for each image that I used in my project or I missed a button "replace or update" easy somewhere?
Thanks for the reply from Brad! I appreciate that I was not doing something "evil". Help my sanity! It is therefore regrettable that most customers want to see the project as it will be no watermark, so its normal to the top on a white background and crop an image to fit a video composition and or corrections of color for a client.
I found the work around others who seek to solve this problem in their own first Pro CC projects (2015):
- Make sure that when you add an image to your library project, it goes to your project folder.
- You can set the type via FILE | PROJECT SETTINGS | RECORDS OF WORK. Look for the entry CC libraries downloads and change it 'even in as project'
- This will create a "Libraries CC downloads" folder in your project file. When you add pictures/videos to your project, it will save them here.
- You can set the type via FILE | PROJECT SETTINGS | RECORDS OF WORK. Look for the entry CC libraries downloads and change it 'even in as project'
- In your Premiere Pro library window, you can then add filigranées images to your project in Ctrl or right click on the desired image and selecting Add to the project.
- The image/video watermark will be added to your project window in Premiere Pro, in the file in your project folder and can be added to your mounting sequence / timeline (s).
NOTE: This is the trickiest part. In the Adobe training videos, they say everything you have to do is license then the image in the library and delicate images update automatically in your project, however, they did say not unless you directly change the image (i.e. of Chromakey, color correction, etc.) it will be is no longer auto-effacer the tattoo once licensed. (According to Brad Lawryk, you could potentially do all these things by using an adjustment layer, then move a license would be auto-updated your original unmodified image/video (I have not tested it yet).) If you do not use an adjustment layer, I found two solutions for updating your images to the new non-watermarked version.
SOLUTION 1: Delete the original (watermark) image in your project folder and replace it through the 'library' agency CC window and then allow the Agency in question to the image/video non-filigrane
- These steps assume that you have changed not original filename watermarked for example, let's say the image watermark of origin you used recorded in your bin organization named "park bench". Assuming that you also set up the project to save added pictures/videos on your hard disk to the project, as described above. If you have changed the original name of the video, the following instructions will not work.
- Open your project from the body with delicate images.
- You use Finder on MAC or Windows Explorer, find the image or video that was recorded originally in the libraries of cc file downloads when you have added the watermark version and delete your file CC libraries download on the hard drive of your project.
- This will result in a missing/no related video/image in your Premiere Pro project window.
- In Premiere Pro, use the library to add the image now under license to the project.
- This will result in an image duplicated in your project Panel and a new copy of the image/video not filigranées in your libraries CC downloads folder.
- If the original image/video has been called "bench", you have now a new one called 'Park bench_1' or something similar so added to the location of project as the first picture in the body.
- This will result in an image duplicated in your project Panel and a new copy of the image/video not filigranées in your libraries CC downloads folder.
- The original image "park bench" will always be that active in the sequence of project however and can now be stated as unrelated.
- Make sure that when you add an image to your library project, it goes to your project folder.
- Your hard project in the folder library CC download, you will have a new image or a video called "park bench".
- If you did not remove the original in step 3, then it may be among the 'Park bench_1' as good and the rest of these steps will not work.
- In your project window, select the new 'Park bench_1' that you added (it is allowed without the watermark) and delete it.
- Now SAVE and CLOSE your Premiere Pro project.
- Reopen your project of the
- Agency will now go and find the original image/video name in the folder downloads of CC library and Ottoman, each instance of "park bench will magically be replaced in your project with the new image and video non-filigrane.
- Body may give you a message saying something has changed in this well, but it will allow you to charge it or link that he and you'll be ready to go.
- Agency will now go and find the original image/video name in the folder downloads of CC library and Ottoman, each instance of "park bench will magically be replaced in your project with the new image and video non-filigrane.
- Open your project from the body with delicate images.
- In Premiere Pro, use the library to ADD the image now under license to the project.
- This will result in an image duplicated in your project Panel and a new copy of the image/video not filigranées in your libraries CC downloads folder.
- If the original image/video has been called "bench", you have now a new one called 'Park bench_1' or something similar so added to the location of project as the first picture in the body.
- Original image "park bench" will always be that active in the project sequence.
- Your hard project in the folder library CC download, you will have a new image or a video called 'Park bench_1' or similar as well since the hard drive project or the project itself likes to have two the same exact file in the same place at the same time name.
- If the original image/video has been called "bench", you have now a new one called 'Park bench_1' or something similar so added to the location of project as the first picture in the body.
- This will result in an image duplicated in your project Panel and a new copy of the image/video not filigranées in your libraries CC downloads folder.
- In your project window, select the new 'Park bench_1' that you added (by simple click on it) (it is allowed without the watermark).
- Then, Ctrl or right click on the image/video in your sequence/project schedule and select REPLACE WITH CLIP | OF THE TRAY.
- Repeat this step for each instance of the image in your timeline.
- Check watermarks went to each instance of your sequence.
- Now you can remove the old watermark image/video original of your project window and your record CC download library on the hard drive of your project.
-
SPA9000 And direct Ip calls?
Hi, I just bought a SPA9000, and I wonder if I can set for direct ip calls.
I use the FXS 1 on the spa9000 and line 1 is already on my VOIP provider.
PBX settings
Call the routing rule: (4xx<:L1>. |) <:L2>8xx. | <:L3>7xx. | <:L4>6xx.)And 1 line numbering Plan is:
(<><:@mydynds.com:5061>xxxxxxx)Therefore, the call and the newspaper
-----------------------------------------------------------------------
[3] RegOK. NextReg in 58 (1)
2. number of report 1 (1)(40 ms)
Calling:[email protected]:6060
[0:0] DIAL the ALLOC AUD (port = 16434)
[0:0] RTP Rx upward
[JIU] CallRoute:L144549141
PRI--> INVITE--> pub
Calling:[email protected]:5061
Bcc:ringback / CallProgress 2
CC:ringback
[0:0] RTP Rx Dn
Pub - 200--> CCI - 200--> pri (appeal)
[0:0] ENC INIT 0
[0:0] RTP Tx Up (pt = 0-> c0a80165: 16438)
[0:0] RTCP Tx upward
----------------------------------------------------------------------
But after some time 20 seconds or maybe less she then drops the callRespLooseMatch
[0:0] 16 (2) LAT -.
RespLooseMatch
RespLooseMatch
PRI says BCC GUEST: pri - 200--> CCI - 200--> pub
CC: finished
[0] alert FM stop RxTx (c = 002c67dc; a = 0)
[0:0] call of Rel AUD
359dc0 terminated DLG
Sess end 3668ec
TP Analyzer error: 34
[0] on the hook-----------------------------------------------------------------------
Any ideas?
Thanks in advance.
I tried to research on your problem and I found another element which may help us: Lets guess 2 devices and b. also allows assume address IP is 192.168.1.50 and B device IP address 192.168.1.51.
Configure these settings in device A:
Step 1: Line 1 tab, set port SIP SIP settings section: 5060.
Stage 3: In line 1, Proxy and registration section all the empty fields or no. except to call without Reg: YES and years without Reg: YES.
Step 5: Tab of row 1, section of subscriber information full name value:user ID: 11 and leave the other fields swamp.
Step 7: In the tab section of plan Dial Dial Plan of line 1 on the Court together (21S 0<:@192.168.1.51:5060>), enable the IP numbering: YESConfigure these settings in device B:
Step 8: Line 1 tab, set port SIP SIP settings section: 5060.
Step 10: In line 1, Proxy and registration section all the empty fields or no. except to call without Reg: YES and years without Reg: YES.
Step 11: Tab of row 1, section of subscriber information full name value:user ID: 21 and leave the other fields swamp.
Step 13: In the tab section of plan Dial Dial Plan of line 1 on the Court together (11S 0<:@192.168.1.50:5060>), enable the IP numbering: YESNow, how does it work:
-To call device 1 line of device (any line) B dial 11.
-To call device B line 1 of the device (one line) dial 21.This has proved works with two SPA phones that are configured in the same local network segment. But in you I thing deal you make IP dial in on a remote network that would probably be another network. In this case, I think that you must configure the VPN between the network where the SPA-9000 and the other phone remotely. Then configure the IP numbering as as it is done in the above procedures.
I hope this helps.
-
Unconditional call forward on SPA9000
Hi all, I am trying to set with CFD for all calls on SPA9000 SPA922 telephone. I have one-way voice problem.
I did extensive debugging with traces SIP and I think I found a problem.Here is a part of SIP trace, step 2: (I deleted the IP and all the unnecessary parts)
16:19:50.67257 - C5CM - xx.xx.xx.xx - S = 5060 - D = 5060 - TOS = 0 x 68.
INVITE sip:[email protected] SIP/2.0Referred-by:; REF is 103 Diversion:;. reason = unconditional
User-Agent: Linksys/SPA9000-6.1.5v = 0
o = Clarent 162066 162067 IN IP4 zz.zz.zz.zz
s = Clarent C5CM
c = IN IP4 222.173.190.239
t = 0 0
m = audio 48879 RTP/AVP 0 8 101 100 102 103 104 105 t38
a = rtpmap:0 PCMU/8000
a = rtpmap:8 PCMA/8000
a rtpmap:101 telephone-event/8000 =
a = fmtp:101 0-15
a = rtpmap:100 AC100/8000
a = rtpmap:102 AC102/8000
a = rtpmap:103 AC103/8000
a = rtpmap:104 AC104/8000
a = rtpmap:105 AC105/8000As I see it, the problem is in this line:
c = IN IP4 222.173.190.239
Here must be IP address: zz.zz.zz.zzWhence came this IP address?
It is not present in the config.I tried with firmware version 5.2.5 and 6.1.5 SPA9000. They both show the same behavior. I would go to the old versions and test them because I know that it worked in the past, but it seems that SPA9000 is not possible to downgrade.
Kind regards
Miro
-
SPA9000 outgoing call won't. Get the "busy" signal and "CallEnded" message.
Hello
I have 9000 SPA with SPA400 and 8 configured SPA941. Everything worked up until the service has changed the proxy. Now because of them I'm trying to configure a iristel Line3 lines. Incoming calls are coming. But not able to make outgoing calls using the iristel line. I tried to change the line. No use. Can be Server NAT is a problem. I use the LAN and the router is WRT300N. How do I enable port forwarding and what are the values of beach to give? Any help welcome.
Thank you. Hope it will work. I did the port forwarding today on WRT300N. To see the results tomorrow. Hope that the SIP line will remain registered until tomorrow.
-
Does my votebook parks HARD drive automatically
Hello
I had a day ago Satellite A300D-11 s 3.
And I want to know if parks HDD heads is when I put the PC to sleep ot put into hibernation or when I turn it off?
I searched a lot but I couldn't get any information.
I hope that someone will find out and tell me.Thank you!
You still see your user manual? Should be able to find some info here. It is usually on your C: drive in a folder called DOCS.
I'm sure that HDD Protection is only for the ultra portable laptop... That is to say their Tablet PC etc, but I could be wrong. :)
-
Global amusement park does not work with windows 7
I just got vista ultimate and worked world theme park but some things were not on the game, in any case I have windows 7 and the game installed but it won't start?
There is a way to get the program to run in windows 7! I cracked it. The game crashed because of the graphics engine in windows 7. All you have to do is to navigate in the main folder of theme park worlds and then go to the folder "data". Here are 2 files one is called Resolution.sam and the other is called _Resolution.sam. The first thing you need to do is open the file _resolution.sam with notepad. Here you will see a first option of graphics. Change the setting from 5 to 0 and save and exit. Rename the Resolution.sam Resolution2.sam, and then rename _Resolution.sam to Resolution.sam (remove underscore essentially). This will activate the substitution. Also make sure that any compatibility windows settings are disabled. If anyone of you has Theme Park Inc., it works for me with that aswell. People happy Gaming!
-
Scam/prank phone call?
I received a phone call from someone claiming to be representative of Microsoft Windows. He said I had a Virus and that he had to talk me through a few steps to do a small patch on my computer. He says his name is Steve Parker and gave a number of Id itself 12724. He was a foreign language and doesn't sound like a 'Parker '! This is the second time he called home and them twice was adamant that I get on my computer and it allowed him to help me with this problem of windows. He knew that our windows liscensed on behalf of my husband and I was the main user. He said that Microsoft called everybody in this country to provide assistance to this correction! This has ' scam/prank"written all over it! Should I proceed to post this to anyone outside of Microsoft Windows?
Hello
It's a scam.
Tell them that you declare them to the Police and hang up on them.
Microsoft does not contact you unless YOU have made prior arrangements with them to do.
There is an article in the link I'm you provide at the end of this one
Read this Information from Microsoft:
"Avoid scams to phone for tech support.
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx
Don't be fooled of unsolicited calls. Don't provide personal information.
Here are some of the organizations that cyber criminals claim to come:
Helpdesk Windows
Windows repair center
Microsoft technical support
Microsoft technical support
Windows Support Group Technical Department
Microsoft Research and Development Team (team of Microsoft R & D)
Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.
We have all the errors and warnings in our Event Viewer
If you gave them remote access and you do Internet banking, contact your bank, explain, and change passwords.
If you use your online credit card, cancel and get a new one issued to you.
And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.
See you soon.
-
Fake phone call from microsoft about an error report which does not send
a phone call on my landline today which is active for 2 weeks of the gentleman called Sam Parker claiming that it was Microsoft. He said that my computer was going slowly and that an error report had them alerted to the fact that certain safety ripped on my computer? There therefore eft with unfamiliar programs on here etc etc. Me being the shocking type said I saw the error message but not him hadn't sent because it crashed me the kick-off of the system. He didn't want to log on and it me by happen then to the technical team who could advise me where they were and I could remove them. All this happened yesterday, or the day before that I don't remember. I told him I wasn't going to do this as it could be anyone and asked for a phone number to call later today on. He gave me the number, but when I tried to ring it says wrong number and if I use the reminder it bleeps just like the engaged tone. Ayone can tell me if he's a jerk or real please? Thank you very much
For more information on this type of scam, see the following:
-
SPA9000 Setup problem with FXS ports
SPA9000 PBX, configured with two VoIP providers implemented voice-> 1/2 line parameters. A telephone is connected to the FXS 1 (or 2 FXS) port and able to choose the right VoIP provider when making outgoing calls.
SPA9000 question is that once the outgoing call is established, does not meet the other numbers composed for the extension of the called party number. Same question when you dial a number where voice prompt responds to the call, offering the choice of activities, to choose the specific number. None of the input selection works as nothing is written on the dial.
Located in the Canada. VoIP providers: freephoneline.ca & callcentric.com
SPA9000 Setup:
Software version: 6.1.5; Hardware version: 1.0.5(a)
Voice-> SIP-> PBX parameters-> call routing rule: (<:L1>9xx. |) <:L2>8xx.)
Voice-> SIP-> settings-> telephone numbering Plan PBX phone: ([89], S 11, 0 [3469] |) [89] 1 [2-9] xxxxxxxxxS0 | [89], 011xx. | ([89], xx.)
Voice-> FXS 1 / 2-> Dial Plan: ([89], S 11, 0 [3469] |) [89] 1 [2-9] xxxxxxxxxS0 | [89], 011xx. | ([89], xx.)Voice-> line 1-> Dial Plan: (<>xx.) [Smiley here shows insetad of: and >]
Voice-> 2-> Dial Plan line: (<>xx.) [Smiley here shows insetad of: and >]Voice-> regional-> ringtones of appellate courts:
Tone: 350@-19,440@-19;10(*/0/1+2)
Second tone: 420@-19,520@-19;10(*/0/1+2)
Outside the tone: 420@-16;10(*/0/1)
Prompt tone: 520@-19,620@-19;10(*/0/1+2)
Busy signal: 480@-19,620@-19;10(.5/.5/1+2)
Reorder tone: 480@-19,620@-19;10(.25/.25/1+2)
Off-hook warning: 480@-10,620@0;10(.125/.125/1+2)
Back ringtone: 440@-19,480@-19;* (4/2/1 + 2)
Confirm tone: 600@-16;1(.25/.25/1)
SIT1 Tone: 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
T2is Tone: 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0)
SIT3 Tone: 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0)
SIT4 Tone: 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0)
Tone MWI: 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2)
Cfwd-tonalite: 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2)
Holding tone: 600@-19;*(.1/.1/1,.1/.1/1,.1/9.5/1)
Tone of the Conference: 350@-19;20(.1/.1/1,.1/9.7/1)
Ensure the Indication of the ringtone: 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2)
Featured call tone: 350@-16;*(.1/.1/1)Hi @sglumac, it seems that your SPA9000 is a Cisco product. Please repost this at this link: https://supportforums.cisco.com/ for solutions.
SOLUTION 2: Use the REPLACE WITH CLIP function in the body
I hope that these steps will help other people who found themselves in my bind even in that I was.
Maybe you are looking for
-
HP Pavilion 17 Notebook PC: Realtek RTL8188EE adapter wifi connectivity issues
Help, please! I had bought this HP Pavilion computer with operating system Windows 8.1 and did the upgrade of Windows 10, when it came out. My wifi worked well until a few months ago. Now, I lose connectivity constantly. I searched the forums and tri
-
How to remove windows messages after upgrade to windows live mail?
I've updated to Windows Live Mail and want to know how and if I should delete Windows Mail?
-
try to use the USB port and the port is not read in the pc. might have to with the previous problem (Device Manager) thank you agfain falcon64
-
Original title: is it cutting or windows 7? I have windows 7 64 bit. I recently bought a cutting floppy usb drive. It installed ok, was visible in windows Explorer. As requested by cutting, I waited more than a minute to insert the disc. As soon as I
-
All Halo... Anyone know about the will of time required for a port to re-aging/re-learning when we use port security limited dynamic locking? Kind regards Leonardus