Spare headsets

Similar Questions

• Headset Bluetooth HT820 (Atria) spare parts

  I had a broken in my HT820 ear cushion and just lost another; Yes, I know, I understand or how it happened, but it did. The broken a leather ripped only, no problems in plastic. I have tried to get the replacement, plastic tips included, but it seems that there is no spare part for this so, afford to buy a new helmet, even when they work perfectly lost or broken ear-cushions

  Has anyone had this problem or knows where to find this part? I thought to find someone with a HT820 broken to get the spare him, but nobody publishes broken helmets.

  If anyone knows were to bring or a person selling a broken, please let me know!

  Thank you very much.

  
  

• Connect two BT headsets at appleTV4

  Hello

  Is it possible to connect two headsets bluetooth in appleTV4 at the same time?

  Apple say several units at the same time, the exodus headset and controllers, but do not know if both headphones work.

  Best regards

  Erik

  Bluetooth audio sends only the stream to a pair of headphones. However, you can buy dispatchers bluetooth spare parts in order to get the desired results, but as computers, tablets and phones only 1 headset can be paired at one point with the ATV...

• Can I connect the watch or Bluetooth headset at the same time?

  The watch or Bluetooth headset (maybe a pair of the Airpod) connect at the same time?

  I have iPhone 6 now and will update to 7 earlier.

  I do it all the time with my iPhone 6. I assume you mean to plug the headphones into the iPhone, right? Whatever it is, you can connect to the phone or watch.

• Problem syncing Bluetooth with headset Samsung level U

  I have an iPhone7 and the SW last update 10.0.2.  Bluetooth is turned on and the headset is also turned on.  The iPhone is not recognized/sync with the headphones?  As I know there is no way to update the firmware in the helmet.  I have another device and the phone synchronized without problems.  All the world has faced questions?  Headset works great on your old phone.

  to connect a bluetooth headset to a device, it has not been connected with before forcing the user to place the headset in pairing / discovery mode, how it's going to depend on the headset and should be in the manual of headset

• Can I connect more than one headset bluetooth with Apple TV 4?

  Can I connect more than one headset bluetooth with Apple TV 4?

  No, sorry. This is a limitation for all devices Bluetooth headset.

• How to use a Bluetooth headset to make phone by Apple Watch call?

  My question:

  my iPhone is on the platform to the floor. I'm in the garden, away from my iPhone, outside of the coverage of bluetooth. However, I'm on my WiFi network so my Apple Watch is connected to my iPhone via WiFi.

  I get a phone call on my iPhone at home and my rings Apple Watch on my wrist in the garden. I answer with the watch, but I would like to continue the conversation by using my bluetooth headsets, which are associated with my Apple Watch...

  Is there a way to do this? As far as I can see, bluetooth headsets can be paired with Apple Watch to listen music stored Apple Watch...

  Tnxs.

  Hello

  It is not possible to use a Bluetooth headset that is associated with Apple Watch in order to pass or receive phone calls.

• No sound when using a headset? 7 7 iPhone

  I've recently set to upgrade to an iPhone 7 latest updates installed and have clearly wonderful audio using speaker phones, but as soon as the headphones are plugged, theres little or nothing then vanish its pointless. The headphone volume is at full throttle and phone recognizes they are there, and today he said could be a problem in my iTunes account - where are the settings in iTunes to study and does anyone know a way to fix the inaudible? Help greatly appreciated!

  Hello and welcome to Apple support communities, Iarns82.

  If I understand your message to the right, when you use headphones with your new iPhone 7, there is no sound or the sound is very low. I use headphones with my own iPhone almost everyday, so I can certainly understand how it is important to get the best possible sound for the steps. I'm very happy to help you with this.

  The first thing that I recommend you do is try the sound with another pair of headphones. This will help determine if there is a problem with your headphones, or if the problem is with the iPhone itself. If the same sound problem occurs with a second pair of headphones, let's check some settings of your phone:
  

  1. Open your application settings.
  2. Select music.
  3. Enable the control of sound. When activated, your iPhone will detect when you play naturally music has low volumes and he will adjust accordingly.
  4. Check if the Volume limit is on. If this is the case, drag completely to the right to turn it off.

  Then, test your sound using your headset. If the problem persists, follow the steps If your headphones do not work with your iPhone, iPad, or iPod touch, specifically, this section:

  Look for debris, damage or loose connections

  1. Look for debris in making headphones for your iPhone, iPad or iPod touch.
  2. Check your cable to earphone, connector, remote control and headphones for the damage such as wear or breakage.
  3. Search for debris on STS on each earpiece. To remove debris, gently brush all openings with a small brush bristle that is clean and dry.
  4. Firmly plug your headphones in. If your iOS device has a case, remove the case to get a good contact.

  After you have gone through these steps, test again your helmet.

  Thank you for using communities of Apple Support.

  Take care.

• Pairing Bluetooth headset with Apple Watch 2 series?

  Hoping that someone here has some good ideas, so I can avoid having to go through the centre commercial/Apple Store!

  Bought a watch series 2 the day of the launch, immediately tried to pair with the bluetooth headphoens I got (AvierBTE somethings). No luck. Thought maybe I just got bad headphones - but they always associate with my iphone 6 s. bought a pair of Mswift Pow helmet off Amazon and bluetooth headset at the same time borrowed a friend this pair with its original Apple Watch. My Mswifts, or his headphones will pair with my watch, although the two pair with my iphone.

  My watch IS pair with my amazon echo - so I know the bluetooth works.

  The watch is the headset in discovery mode, but when I try to pair, it gives an error and says it cannot associate, check that the camera is turned on, in range, etc..

  Another person had problems of this kind and has managed to find a solution?

  Hello

  Make sure that you follow the instructions for pairing here:

  Use the Bluetooth with your Apple Watch - Apple Support Accessories

  It can help to turn off pairing your headphones for your iPhone (or any other device that they can already be coupled to) before their pairing at your watch.

  It can also help when you try to pair your headset with your watch, to move the two devices to another place, away from any device Bluetooth can be active.

• can I listen to music on the watch with a wireless headset while I swim laps?

  can I listen to music on the watch with a wireless headset while I swim laps?

  Short answer, Yes, but you will water proof wireless headsets. Not for the first watch of Gen.

• IOS error 10 Bluetooth headset

  Hello

  Since I've upgraded to iOS 10 on my iPhone 6, my quick mpow Bluetooth headset does not work as Hey used to. When I turn on, they automatically connect to the iPhone and I get the small icon beside the battery meter indicates the State of charge, however, they do not appear as an audio device in spotify, itunes or other audio applications.

  Only the way to solve it is to "forget the device" and re-pair the helmet - pain in the * when to go to the gym, etc.

  I tried to reset the network settings according to another post on the forum, but there is no reaolve the question.

  Any ideas? She must have iOS 10 as they worked perfectly well until last week and I tried it on my iPod touch 4th generation and they work perfectly.

  Thank you

  I have this problem also with a SoundPeats QY8. I think it's a bug of iOS 10 because he was allowed in the iOS 9.

  In order to obtain the device name displayed for audio playback, one solution is to click on the name of the device under Bluetooth settings after it is already connected, which is a useless chore.

• Can you iPhone 7 connect to USB headset

  Hello!

  I am the owner reasonably high-end headphones Sennheiser Momentum M2 wireless. It connects to my iPhone via bluetooth or using removable 3.5 mm plug + cable. When I use it with my MacBook, I connect USB cable to the USB port on my MacBook Pro to listen to the audio quality (M2 these headphones have a micro-USB connector).

  It made me wonder if I could connect my M2 headset with my iPhone 7 using a micro-USB male for cable male-lightning and listen to music when, for example, the battery is dead, or when I want the best quality audio.

  Thanks in advance for taking the time to answer my question.

  No, the usb headset is cards usb audio full blown for computers that require device drivers work

• iPhone 7 bose headset does not when you use adapter

  the head phone microphone does not work on the iphone using the adapter 7. Everyone knows about this problem?

  Hello

  Other users have reported the same problem.

  He can help, at least temporarily, to disconnect and reconnect the headset to / la carte.

  A user says that Apple can work to correct a software bug.

  I suggest that you let Apple know that you are also facing this problem:

  • https://www.Apple.com/feedback/iPhone.html

  More information (for example):

  Problem with iPhone 7Plus, lightning audio commands, connector and inline

• Lighting control and microphone headset disconnects on iPhone 7 more

  Here's my question:

  I use headphones a lot. While driving, my desk at work etc.

  I have an iPhone 7plus and have lightning of headset connected, is I let them cool for a long period of time, I can hear this sound as a click. Once this click occurs, mic/line controls stop working, but I can still hear notifications and music.

  I can restore the connection just unplug the headphones and plug their folder in. My fear is that this is some kind of energy saving function, but I'm not sure.

  Does anyone else have this problem?

  I'm having the same problem.

  After sitting idle for a few minutes there is a pop sound and then controls no longer work until the headphones are disconnected and re connected.

  This problem also affects the mic which means that if you get a phone call and try to answer through the helmet, the person at the other end will be unable to hear you.

  I'm afraid unplug and re - connect the headphones will cause unnecessary wear on the port of lightning and the helmet.

  Hope that soon, there is a fix for this problem.

• Headset does not work for phone calls on the iPhone 6 s with update of iOS 10

  Is there a way to solve this problem

  Go to settings > Bluetooth and turn Bluetooth off then turn it back on.

  If this does not help, the pair of UN then re pair the headset > Set install and use third-party Bluetooth - Apple Support Accessories