SPDIF interface

Similar Questions

• Nosound wav playback. SPDIF is active

  I am trying to play a wav file, do not hear it.  In the devices section of Control Panel Audio, when I play I see green bar activity then the SPDIF interface. When I test however, there is no sound. When I test the device of speakers, I hear, but even if I put the default that I do not hear the wav file.

  Hello Katherine001,

  ·         This happens with any particular .wav file or all .way files that you try to play?

  ·         Using the default Windows Media Player to play the .wav file?

  ·         Have you an error when you try to play the file?

  ·         Have you tried to read this file on another computer?

  ·         You have the SPDIF or analog speakers connected to your computer?

  You should try to read this file on another computer and check if you can hear the noise that the file may be damaged.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think

• No sound via HDMI output portable computer connecting to TV

  Original title: laptop HDMI to the TV - no sound
  
  Until a few weeks ago, it worked fine: I simply plugged the HDMI cable between my laptop and the TV and got audio and video on the TV (after the correct AV channel on the TV).  Now, I only get the video.

  I looked through other issues on this forum but have not found anything that works.  I hesitate to change too much, as it has worked before.

  I see two devices in my "playback devices": "Speakers" (default) and "SPDIF Interface.

  Laptop: Packard Bell Easy Note TJ65 Pentium Dual - Core CPU

  Windows 7 Version 6.1 (Build 7600)

  TV: Plasma Panasonic TX-PS42S10B (HD Ready)

  Any ideas, anyone?  I think that as I made very few changes, the fix should be simple.  I have not yet tried another cable, but I'm sure it's OK.

  BINGO!

  (So I had to go JustAnswers.com & pay £28, but I got the answer right away... well I went earlier!)

  Happy to share, though, for anyone faced with this annoying problem...

  I went to Device Manager (Start button > right click on computer and selectManage) and uninstalled the device calledIntel(r) Audio high definition HDMI.  Restart the computer.  TV connected with an HDMI cable.  Right click on the little speaker symbol & slected playback devices.  Panasonic TV shows as a device.  Right click on it & as default.  I got my sound back & all works correctly.

  It seems that the driver had been updated somewhere along the line and is no longer compatible.  Following this process makes the computer to replace its own driver.  All this time I was looking for a newer driver, and what she wanted was old!

  For the record, the device in the Device Manager is now called the high definition Audio Device. No mention of HDMI!

  Also, if you right-click on the desktop, you get a wizard to set up the TV interface.

• No sound in Windows 7 32 - bit (Notebook Toshiba)

  Hi all.

  First of all, I want to say, it is of a Toshiba Satellite P105-S9337 and this is a new installation of Windows 7 Ultimate 32 bit. Now, on XP, this laptop was perfectly fine - everything worked correctly. However, after installing Windows 7 seems to have met a problem with the audio does not. The details are being Toshiba V4.70 19/01/2009 - BIOS SMBIOS Version 2.4. The motherboard, from what I can tell, is called a P105-S9337 motherboard (shrug).

  Now I have almost tried everything. Before everyone tells me, Yes, I ran the store and check to see if my audio is enabled, the value by default, etc, etc. Windows 7 downloaded and installed its own version of the Conexant SmartAudio HD2 high-definition (4.36.7.60; 2008-04-11). However, has no - no sound.

  I was in the Web from Toshiba site and downloaded their Conexant Audio Driver for Windows 7 (v4.8.0.0), 04/09/2009. When defective, I downloaded versions of Windows Vista, they come out to see if they work. Also missed me. Then I fell a P105-S9339 version - to see if its pilots would work. However, nothing was done.

  I checked with programs that automatically download the drivers needed, but who has not yet detected that there is a problem. I can even open the playback Menu and it displays "Speakers" and "SPDIF Interface" listed. I'm going to play a song, and it will show the volume on the speakers!

  The only time where I hear audio is if I plug in headphones. I can hear sounds through headphones, but no speakers.

  Also one thing I've observed. Whenever I update to automatic pilots of Windows 7 to the latest drivers Conexant 4.8, my reading of "Speakers" changes to "internal Audio / headphones." Why would it be?

  Please, I've worked on this all day. I can't find a solution!

  My husband has had the same problem after I installed Windows 7 on a Toshiba Satellite P105-S9722 which was previously under XP. After a lot of research and frustration, we had to try theDriver Conexant Audio for Windows Vista(v3.18.0.51; 02-02-2007; 2.3M)

  I guess that they do not have a stable driver for 7, but the Vista driver worked instantly. I hope this has helped!

• Satellite P100 (PSPAAE) - SPDIF and helmet is the only audio options

  Interface SPDIF and the helmet is the only options for audio output, if the SPDIF of my sound card? Speakers work when using the webcam, but not now it are disconnected?

  Hi vickylou001,

  Probably, you need to reinstall the audio driver. It might be something wrong with the audio output of the audio driver settings. In order to check the Web from Toshiba site to download the audio driver and reinstall.

  By the way: what OS do you have?

  Did you notice the same problems before installing Logitech webcam software?

• Choice of laptop: requirements of DVI, SPDIF, deejay

  I'm about to buy a laptop

  I have specific criteria and I've been browsing the site for some time and still not sure what's best for me. Please recommend. Here's what I need.

  -I will work with 16-bit 12mpx photos (maybe PhotoShop, Lightroom, Paint Shop Pro, PTGui) and I need sufficient (but not unnecessarily high) CPU and memory
  '-J' intend 15.4 ", but if there are reasons (some interesting features such as below), I accept 17.
  -mobility and autonomy are very important to me
  -requested features follow in order of importance:
  1 reasonable pixel size (1440 x 900/15.4 "is probably acceptable, 1920 x 1200/17" is too small)
  2. connect to my flat screen (1920 x 1200 at this time) via VGA DVI - D (preferred) or normal
  3. connect to my ex-PC internal SATA HDD (I'll keep and now make external)
  4. connect to my receiver via SPDIF 5.1 - before it was unavoidable... now, nice to have following
  5 can be used for DJ - ing: which requires independent and line out headset. Often the DJ software solves it through before L, R, REAR L, R channels.
  But it is very rare for the prohibition of nuclear tests, so I think this should be solved through external sound card
  6 - DVB - T tuner (or external possible? what interface?) (if conditions 4 and 5 are met, it is secondary... in other words, I prefer external tuner for external sound card)

  There are other things, but they are very common:
  WiFi, Bluetooth, approx. 4xUSB, card reader, DVD, WebCam, micro burner?

  I appreciate your time

  R *.

  Hello

  I don't have time to check what Toshiba portable computers that meet your requirement, but what you could do is to check the European site of Toshiba-> Products-> area of notebooks

  You will find the most recent series of Toshiba and hardware specifications together.

  PS My favorite series is a series of Satellite Pro P maybe a P300

  See you soon

• New Audio USB Interface lose sound on El Capitan

  Hi all!

  A few weeks ago that I upgraded my MacBook Pro retina 15 "end 2013 to El Capitan, after that my USB Audio Interfaces (Focusrite Scarlett 2i4) and Safire 6 USB stopped working properly. Both work correctly when they are connected to an iMac 5K running the same operating system.

  I can listen to Audio for some time (about 10-2 Minutes, it is always different), when the Audio starts to crush und get outs, after a certain time there is only silence "click on" come out of the speakers.

  Heres an Audio file of the sound that results from: https://www.dropbox.com/s/5nb96bmdh47kmi2/20160923%20141619.m4a?dl=0

  I already tried to reinstall OS X (starting with CMD R and reinstall OS), reset PRAM and SMC. Nothing has changed the question. Any ideas where it comes from?

  Greetings

  Chris

  It is most likely a software conflict. Note the time at which audio is running out. Open the Console and look for accidents or mistakes at this time.

  The reason why it crashes on a mac, but not the others most likely is related to differences in software installed. Run Etrecheck on touch mac and post the report here.

• The interface usb audio of Behringer U-Phoria UMC404HD work with Garageband?

  I just got an interface USB 4 channels for recording guitars and microphones. It has no driver, but instead uses the Mac OS. I implemented the sound control panel to recognize the device input and output, can I use the Audio configuration utility and MIDI to fit a recording at 192000HZ.

  My problem is that as soon as I open GarageBand 192000HZ setting falls down to it is more low 44100 HZ. It is a flaw with the audio interface Behringer or is it a problem of system software?

  I will mix Behringer messages on this problem, a guy says that the interface has a bad component castigates other Garageband.

  I would appreciate hearing from anyone with any interface from Behringer, who used it to 192000HZ using Garageband.  Any other comments welcome.

  

  

  I have this problem on 3 different computers using systems to a new installation of 10.11 10.6.8. A few different USB cables. More recently, on an I7 Mini with memory 16 concerts with 10.11.6. Currently on Garageband 10, but the same problem with Garageband 6

  I talked to an Apple technician and the answer is that Apple has "capped" sampling in 441000HZ setting.

  Thus, in spite of the box is designed to accept 192000Hz sampling, apparently GarageBand has been paralyzed for a lower sampling only to the adjustment system. Another program audio I, Amadeus Pro, has no difficulty with the parameter to 192000.

  TSK, tsk Apple...

• iPhone 5 s acting weird from the hotmail interface has changed

  Hello

  My 5's mail app iPhone acted as weird as the hotmail Web site interface has changed a few weeks ago. The Junk folder disappeared and now, when I get an email, the phone rings and vibrates as before, but it is there no preview on the lock screen, or the notification Center.

  What is happening to someone else? How can I fix it?

  Thank you

  Hello

  It can help to check your email notification settings:

  • Go to settings > Notifications > mail > select an account to check the notification settings.

  You can also update your iPhone to the latest version of the software (your post indicates that it is not up-to-date):

  • Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

• Audio interface Thunderbolt to crash Windows Boot Camp

  Hello, my audio interface crashes Windows Boot Camp on my MBP 15 "retina. It works very well on the side of the BONE. I've updated everything (including the drivers and firmware for the device). The audio interface is the MOTU 828 x. It is designed for use with Windows via TB - my concern is that this does not mean Boot Camp Windows

  When I turn on the device, Windows crashes immediately on a blue screen saying: "your PC has encountered a problem and needs to restart...» PNP_DETECTED_FATAL_ERROR ". I tried all combinations of plug etc. aside first turned off, turned on mac.

  Thanks for any help or ideas!

  Run a test and reset SMC and NVRAM.

• Hard drives, Interface regularly ejected

  Hi people,

  Since the update to the latest El Capitan (10.11.6), all my external drives and the interface is constantly ejected.  want to go back to the previous version, but the ejected disc always has this version.  Options?

  BOE

  Try disabling put hard drives to sleep even when in energy saver preferences.

  In addition, check with the manufacturer of drive for an update to fix the problem.

• Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  I mean ' diskutil cs * " and so on..."

  Yes, you must use the resizeStack command. Please see Re: how to repair fsck "your drive could not be partitioned..." Bootcamp does not as an example.

• How to change language in Firefox interface to English in Windows?

  I have Canon find where to change the settings of the interface. I need English to be the language of the interface.

  If the Firefox UI (toolbars) is in the wrong language or you want to change the current language then get Firefox in the language of your choice.

  You can find the full version of the current version of Firefox (41.0.2) in all languages and all systems operating here:

  • https://www.Mozilla.org/en-us/Firefox/all/

• Need a MAC interface to resize fonts in the dashboard of thunderbird?

  In this expanding market of Hi-rez and retina display screens a user friendly interface is desperately needed to allow for the expansion of at least the sidebar font size, otherwise the menu s in thunderbird. Not everyone who uses a computer has 20/20 vision and surely after using thunderbird on a 13 "Macbook Pro, it won't be long before you'll need sunglasses!
  Hey Mozilla, this necessary improvement is expected for a long time! Seriously! I was squinting at Tbird for almost 10 years, and now I need glasses thanks to what seems to be the apparent equivalent 8pt text! I really hope that someone to kiss my request before my prescriptions are transformed into coke bottles (a quick google shows that I'm not the only one having this problem)! If the answer to this request is to whip up a quick hack to a file that does not yet exist, you think, well I can tell you that GUI users will not even know on a file name, much less how to handle the details of this stylesheet to MIA cryptic deeply called userChrome.css! Come on, lets get real for a moment...
  If there is someone out there who can get out of an interface module friendly user or an extension which will give the technicians or those of us who don't want to spend 1/2 day learning how and where create this masterpiece and the other 1/2 of the day manipulating its variables, I can assure you, many users of Tbird will be grateful!

  To adjust the fonts in menus, thread pane, folder pane etc. :

  https://addons.Mozilla.org/en-us/Thunderbird/addon/theme-font-size-changer/

  http://KB.mozillazine.org/Bad_Eyesight_-_Thunderbird

• Crack suddenly / audio distortion via USB interface

  Hello

  I use an iMac of retina end of 2015, which is connected to a USB AG06 Yamaha interface. The interface provides an audio output to my studio monitors.

  For these months, audio works flawless, but all of a sudden yesterday things got ugly. Briefly the sound works (often less than 30 seconds) then crackling / distortion occurs, causing finally audio fade out and back in. The problem is temporarily resolved if I disable the interface and turn it back on. I have not changed the settings or installed new applications - the question is just appeared from nowhere.

  Initially, I assumed that it was the fault of the USB interface, but I tested it on another Mac and it works without any problem. I tried to restart, stop, uninstall all additional audio devices, and disconnect all other USB devices, but the problem is still there. I tried other USB devices, including a Schiit Audio USB DAC on the iMac even, and it also works without any problem.

  Any idea is appreciated!

  Thank you.

  all USB audio devices act the role of being a card usb external audio such always needs a driver, don't know if there are any drivers for the card generic usb audio if I was you, then I go to yamaha and look for an osx for your version of driver for their product

  Apple do not have drivers for hardware devices of third party if included in osx, then it is because the developers of hardware committed a pilot tested and improved Apple and became part of the osx installation

  If a new version of Mac OS x is installed, and yamaha has not committed a driver or the same clerk driver than the last time and he could not test it because it displays the questions you experiences in some cases, and you are upgrading, then there is no new yamaha rider so your system just stick to previous driver