Speach.dll results in the c# application and other TTS applications to exit without error

Hello

I'm looking to use the speach.dll within a c# application and noticed that it is causing the app exit without any exceptions, no newspaper, no error or anything.

Copy the following code will cause the failure:

using System.Speech.Synthesis;

        SpeechSynthesizer speaker = new SpeechSynthesizer();

        try
        {
            speaker.SetOutputToDefaultAudioDevice();
            speaker.SpeakAsync("Some text"); // <<< this causes the app to crash
        }
        catch (Exception ex)
        {
            Debug.WriteLine(ex.Message);
        }

The library of Microsoft.Speech.Synthesis works well. I also noticed that the Narrator fails to launch, just like all the other apps TTS.

Does anyone else have this problem or a solution?

Thank you

Win7 32 bit

Hi parenese,

You can get help on this issue in the MSDN forums.

Tags: Windows

Similar Questions

  • I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  Not compatible with the OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the new OS

    I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  System indicates the computer is not compatible with OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the latest OS.  I think that later models of Macbook Pro 17-inch with processors that allow updates.  I was wondering if these can be swapped or if alternatives were available.

    Only the RAM and storage (HD, SSD) can be changed.  Everything is welded to the map logical and selected specially for the system configuration.

    I'm sorry.

  • I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

    I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

    There are two main reasons for the mistakes of certificate:

    1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
    2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
         <>http://support.Microsoft.com/kb/931125 >
      and go down to the section:
      'Update Package root (designed for Windows XP only)'
      There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

    HTH,

    JW

  • How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

    Original title: deleted user accounts.

    Hi guys,.

    I want to know the activities of a user whose account has been deleted. How can I get the history, SID and other details of the accounts of users deleted in Windows XP, 7 and 8?

    Hello

    Thanks for posting in the Microsoft Community.

    There is no newspaper available for the activities of the user. There are just a few activities of windows and the error logs is stored in Windows.

    Hope this information helps.

    If you need help to resolve any issues related to Windows, please reply and we will be happy to help you.

  • I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu.

    I have some clips where does not show the audio waveform and others where the thumbnail to display the video does not show. THE possibilities of sight are checked in the Tools menu. Screen Shot2016-03-14 11_53_24.jpg I'm on a Mac Pro 2013. Latest version at all.

    Looks like without the audio element is a nested element.  You will need to restore the audio signal in order to see the wave forms.

    I have the same problem (sometimes):

    https://forums.Adobe.com/message/8527998#8527998

    Without rhyme or reason, as far as I can tell.

  • I bought the Photoshop 19.99 plan for a month so that I can check the new Illustrator and other new programs CC and see if I liked the concept... Now that I checked out, I decided to upgrade to the full cloud...  There is a prom one year

    I bought the Photoshop 19.99 plan for a month so that I can check the new Illustrator and other new programs CC and see if I liked the concept... Now that I checked out, I decided to upgrade to the full cloud...  There is a promotion for one year to 29.99 per month for users of cs3, but when I try to upgrade my contract he wants to load the full 49.99... is there someone I can call?

    Hello Mary,.

    There is a telephone support | Orders, returns and exchanges, you can use > http://helpx.adobe.com/x-productkb/global/phone-support-orders.html.

    If necessary and for further questions click on http://helpx.adobe.com/contact.html and 'open' Please use the cat, I for my part had the best experiences. I quote Adobe Preran employee: the chat button is enabled as soon as there is an available agent to help.

    Hans-Günter

  • In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). I can't understand how to disable.

    In Adobe Flash CS6, I have a blue box appearing around lines drawn with the line tool (and other tools like the brush etc.). Whenever I try to use a tool, a blue box appears around the line and I have to double click on it to handle, which opens just this line in a screen finery semi where all other objects are semi-gris in the background. I can handle this line in this screen, but nothing else at this point I could do 5 minutes ago. For example, I can no longer reach the 2 lines drawn by the tool online together. For some reason, it started randomly (probably due to an accidental combination) and I just can't put it to what it was. I inserted a video showing if all goes well I mean. Any help would be appreciated.

    Object drawing mode. Simply disable it in the tools Panel, or by using the default keyboard shortcut, which is J.

  • Results of the incomplete application of the dba_role_privs and/or dba_tab_privs

    Hello

    I am a PL/SQL Developer and I sometimes use an account with privileges to make DBAs ' ish small things. Using this account, I can create patterns and roles for example. Also I question the views dba_role_privs and dba_tab_privs using the privileged account. However, when our DBAs that the same query against these points of view on the sys account, they do not see the roles that I created using my privileged account. I don't know exactly what they see in these views when working in the sys - only that they do not 'my' roles.

    Can someone tell me why that is (and possibly what to do about it). Hope that's not trivial - I was not able to find all the previous messages on the subject and the documentation I can find says that all the grants are displayed by these points of view without making mention of the exceptions or conditions.

    / Jakob

    The key is that line in the documentation.

    ROLE_TAB_PRIVS described in table privileges granted to the roles. The information is provided only on the roles to that the user has access.

    Allows you to set up a try and see what happens.

    First, we will create a user, TEST_A

    SQL> CREATE USER TEST_A IDENTIFIED BY "";
    
    User created.
    
    SQL> GRANT CREATE SESSION, CREATE ROLE TO TEST_A;
    
    Grant succeeded.
    

    Then let's start as TEST_A, create a role and grant a privilege to table it.

    TEST_A > CREATE ROLE test_role;
    
    Role created.
    
    TEST_A > GRANT SELECT ON DUAL TO TEST_ROLE;
    

    Notes, creating a role implicitly gives access to the creator.

    So now, let's query ROLE_TAB_PRIVS as TEST_A

    TEST_A > SELECT role FROM role_tab_privs WHERE role = 'TEST_ROLE';
    
    ROLE
    ------------------------------
    TEST_ROLE
    

    As planned, we get the result. Now, login as SYS and run the same query:

    SYS > SELECT role FROM role_tab_privs WHERE role = 'TEST_ROLE';
    
    no rows selected
    

    No result, as expected. SYS was not granted this role and therefore do not see it in the ROLE_TAB_PRIVS view.

    Since you use your query as TWO different users and your query depends on the user that is running (because of the ROLE_TAB_PRIVS seen as a reference to the USER), you will get two different result sets.

    I hope this helps!

  • How to return results to the job application?

    Hello

    The application that I must be able to perform procedures and works asynchronously (run a stored procedure and do not wait the results.) A different thread will show the results at a later date).

    What I came up with is a mechanism that distributes the jobs by running the desired procedures and signals the application thread waiting on a performance of the work by using dbms_alert.signal. The application in his spare time reads the results of the table and then employment has created and he falls when it is done.

    The problem is I have many different methods, each do very different logic and you end up with another result/slider/record-set (different columns, different values), I need to be able to read the application after receiving the signal.

    I expect a statement as if by magic 'create table from sys_refcursor', but there seems to be no such thing (disappointment).
    I have read many things on the table and features in the pipeline, but the problem is that for each procedure, I set a different type for the return clause, and I was expecting something more 'generic '. I don't want the procedures to make the table of results to create themselves (unless it's my only option)

    You have a way to turn a sys_refcursor in a table?
    I am that face the wrong way?

    Any help would be appreciated!
    Thank you.
    -Mor

    Pyrocks wrote:

    I have to move the cursor to return - I need to return the result.

    How to get to this result? With the help of a select SQL statement.

    What does Oracle with this SQL statement? Analyze and store them as a cursor.

    All SQLs are analyzed as cursors.

    Why not create a table (temporary use), called "temp_result_n" where n is a number.

    Not a good idea to dynamically create tables - that need to use dynamic SQL. And code management and control to clean later.

    It's ugly. The process will fail and temporary tables created not get cleaned. Dynamic SQL can hit any runtime errors. Etc.

    This is a much more robust approach to use a static data model - one that does not punish dynamic to use code.

    Can you please explain why your way is better than using tables?

    I'm all for the use of the tables. The basic concept I've tried to explain, is that the background process must happen something to the process parent to tell him how and where to get the results, he has created.

    The more flexible method would be to pass a SQL statement - as the background process will know exactly what the parent needs to access these results run SQL.

    The parent gets this SQL statement (with bind variable), run it (which creates a slider) and process the results.

    Another approach is more static - have the parent tell the background process in which table to create its results. But it is less flexible.

    Another approach, you can use use the primary key of the data entity dealing with the background has to process. For example, the caller can give the background process an invoice number and when you said it's done, the appellant knows what Bill has been processed.

    So, there are a number of ways that the parent process and the child process of background can pass data between them. The most generic of these would be for the child to pass a SQL Select to the parent of the parent to use to access the result set created by the child.

    But it will be a too complex approach if the parent simply needs to create children for an invoice and save the invoice number with the id of child's work. When the parent is the signal that the child is done, it looks simply invoice number that has now been addressed by the child.

    There is no single best approach for this. It depends on your needs and what parents and children must do and how this approach to parallel processing is to increase the performance and scalability to provide.

    BTW,
    I would be very grateful if you could tell me how to translate DBMS_SQL. Column col_type DESC_REC in actual data types (1 = varchar2, 12 = date - where can I find the rest?)

    Take a look at the table in Pro * PL/1 to the precompilateurs Oracle® supplement Guide guide. The same table is probably repeated n other pre-compiler and OIC guides too.

  • 10.11.6 OS update.  Now get the message "Cannot open the App Store app" 'application Notes can not be opened. "  Similarly for the calendar, Mail and others.  That is what it is?  Need a fix.

    Hah!

    Had the problem after upgrade to OS 10.11.6. Many applications open. "cannot open application Notes.

    After McAfee Internet Security setting. Disable the effective Protection has allowed the Apple software to open. After turning on the return, applications, always open normally.  Thanks gang!

    As a suggestion, I would UNINSTALL the McAfee software at the same time. Things are unnecessary and cause problems on many systems.

    Barry

  • By opting for the local account affects the current files and other documents are store in the pc.

    I have windows 8 is installed in my desktop pc

    I want to move my account to GO to THE LOCAL because of user setting I m tried to synchronize my app Mail for new emails and other stuff his watch still unavailable then, opting for the account local affect current files and other documents are stored in the pc at this moment before I spend.

    Hello

    Passage of the account Microsoft local account will not affect your personal documents saved on the computer.

    Reference: http://support.microsoft.com/kb/2782145

    It would be useful that you could provide more information on the problem faced with synchronization.

    -What is the exact error you get when synchronization Mail app and other apps?

    -Do you use all parameters of proxy to access the internet?

    -Remember to make changes before the show?

    -What anti-virus software is installed on the computer?

    If you encounter the problem of synchronization with all applications, then I ran the http://download.microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab Apps store

    Navigate through the steps mentioned in http://windows.microsoft.com/en-us/windows-8/what-troubleshoot-problems-app

    Check if you have any proxy enabled. If so, then delete it.

    a. open Internet Explorer.

    b. click on tools and select Internet Options.

    c. click on connections.

    d. click on LAN settings.

    e. remove the check mark next to proxy server.

    f. click OK and check if you are able to synchronize emails.

    If none of the steps work, try to remove the account from the messaging application and add it again and check.

    Go through http://windows.microsoft.com/en-IN/windows-8/mail-app-faq

    Hope this information is useful. Let us know if you have any questions.

  • [ADF, JDev12.1.3] Opening SESSION: a session ID, HTTPSession, brought bean, UserData... where to store the information? (And other doubts...)

    Hallo,

    my simple application has this main stream job boundless...

    1)

    I see that when I call the login page of this URL http://127.0.0.1:7101 / MyApplication/faces/login, to which - in the address bar - it is auto-ajouté for example ' jsessionid = Wn2ymE_3cC2JXHYtG7_ocZDgMgonLyr376zejB-ui28UPlm5tiuB! 1535501325 ".

    So I guess that the session exists as soon as the user access the login page.

    • I would like to know if I have to worry about a possible previous session (especially another user session).
    • If the user on the home page click the back button in the browser the application creates a new session to destroy the possible previous session?
    • BdW, if my request to place the values in the HTTP session would be a good practice as part of the bean connection null all the attributes of the session?
    • And if my request to place the values in UserData would be a good practice as part of the bean connection null all the attributes of the container UserData?

    2)

    • Is it better to store the information in the HTTP session or UserData?
    • It is less safe than the other? Otherwise why is there the need to have 2 types of sessions?
    • Could he have no sense in storing an individual data in the HTTP session and UserData at the same time?
    • I have seen that the HTTP session is very easy to access, view and (if necessary) and the layers of the model. Is the same as for UserData, or it can be accessed only by the model layer?

    3)

    • In my case, I want to share my application the user in user data:
      • First and last name (only at the end of the display)
      • Name of the service (only at the end of the display)
      • Username and DepartmentId (these hairy should be passed to the query and the view of your criteria)
    • Where I put those values? Who, in the HTTP session? Who in UserData?

    4)

    • I'm in doubt if using a scope session bean or - since the data that I have to share is really little - use the 'basic' (e.g. ectx.getSessionMap () .put ("key", "ValueToStore")).
    • If I use an extended session bean and I store of simple values (integer, String,...) I don't have to worry about serialization (de)?
    • A scope session bean is accessible from the model layer as the HTTP session basis (what I can put by ectx.getSessionMap () .put ("Key", "ValueToStore"))?
    • And in my situation I could handle everything with a single between UserData anda HTTP session?

    These questions are intended to create a simple login system that stores data needed somewhere in the different parts of my application.

    So any advice is welcome!

    Thank you

    Federico

    1)

    I see that when I call the login page of this URL http://127.0.0.1:7101 / MyApplication/faces/login, to which - in the address bar - it is auto-ajouté for example ' jsessionid = Wn2ymE_3cC2JXHYtG7_ocZDgMgonLyr376zejB-ui28UPlm5tiuB! 1535501325 ".

    So I guess that the session exists as soon as the user access the login page.

    • I would like to know if I have to worry about a possible previous session (especially another user session).
    • If the user on the home page click the back button in the browser the application creates a new session to destroy the possible previous session?
    • BdW, if my request to place the values in the HTTP session would be a good practice as part of bean connection null all the attributes of the session?
    • And if my request to place the values in UserData would be a good practice as part of bean connection null all the attributes of the container UserData?

    -When you close your browser, this will destroy the session

    -None

    -It will be much easier to invalidate the entire session (HttpSession method for this object)

    -When you destroy the http session, it will destroy the Application modules, and it will destroy UserData

    2)

    • Is it better to store the information in the HTTP session or UserData?
    • It is less safe than the other? Otherwise why is there the need to have 2 types of sessions?
    • Could he have no sense in storing an individual data in the HTTP session and UserData at the same time?
    • I have seen that the HTTP session is very easy to access, view and (if necessary) and the layers of the model. Is the same as for UserData, or it can be accessed only by the model layer?

    -We already discussed in a previous thread so I won't comment

    -both are secure. HttpSession exist in java web applications and UserData is specific ADF.

    -Maybe (for example, it is not recommended to access the HttpSession of model project, so you can store some data in the UserData (to be referenced from your, etc.) and managed (so you can bind them directly to UI) Bean)

    -Are accessible only from template (but you can expose a custom to ViewController method that accesses UserData)

    3)

    • In my case, I want to share my application the user in user data:
      • First and last name (only at the end of the display)
      • Name of the service (only at the end of the display)
      • Username and DepartmentId (these hairy should be passed to the query and the view of your criteria)
    • Where I put those values? Who, in the HTTP session? Who in UserData?

    My opinion:

    Name, first name, name of the Department-> session brought average managed (so you can link that directly to the user interface components)

    UserId, DepartmentId-> UserData (or you can store managed bean and pass as parameters to methods of model project)

    4)

    • I'm in doubt if using a scope session bean or - since the data that I have to share is really little - use the 'basic' (e.g. ectx.getSessionMap () .put ("key", "ValueToStore")).
    • If I use an extended session bean and I store of simple values (integer, String,...) I don't have to worry about serialization (de)?
    • A scope session bean is accessible from the model layer as the HTTP session basis (I can put by ectx.getSessionMap () .put ("key", "ValueToStore"))?
    • And in my situation I could handle everything with a single between UserData anda HTTP session?

    -with getSessionMap () .put (), you must pay attention to the data types when you change or retrieve values (for example, do you know if DepartmentId is Integer, BigDecimal, oracle.jbo.domain.Number,..) If this isn't "type-safe". In addition, it is easier to understand what your application keep in session if you managed bean that in order to find all the places you're calling the method getSessionMap () .put ().  And controlled beans are a 'natural' way to keep data in a JSF/ADF application.

    -Not (just brand bean session with the Serializable attribute)

    -You can do something similar to this, but this is not a recommended practice because it would break the MVC pattern

    -If you do not have too much, you can keep everything in HttpSession and expose methods to set the binding vars.

    Dario

  • What is the Adobe Standard and other camera profiles?

    OK, so I use my Canon 5 d mark II, RAW view taken in the neutral picture style.  When I insert the photo into Lightroom at the bottom under the Calibration of the camera program that displays by default, he asked photography using the Adobe Standard camera profile.  My question is: Lightroom taking the final result of the RAW data being turned with the neutral picture style and loading in Lightroom where it translates into photography (RAW + neutral picture style) uses the Standard Adobe?  Or Lightroom takes photography (RAW + neutral picture style) and the substitution of the neutral function picture style setting in my camera and its replacement by a different style of photo he calls Adobe Standard?

    One another and potentially easier to understand how to ask the question would be if I shot two pictures in RAW, one with the neutral picture style located in my camera and one with the landscape and then load it into Lightroom using Adobe Standard camera profile, the two photographs would be any different?

    Sorry, I'm new to digital photography and all the adobe programs and would be very happy with the help of a veteran.

    The pictures would be exactly the same. The style of photo that your device is set on makes no difference to the raw image. This style of photo is distributed in your raw as just a tag file that indicates the Canon raw converter how to interpret the data. Adobe does not use this information.

    It is up to you to choose the profile that meets your artistic desires.

    HAL

  • Stored procedure to get the Admin users and other users

    Hey,.

    I am new to stored procedures in Oracle and would really appreciate the help! I have two tables:

    _ Of the users
    ID USERNAME - PARENT_GROUP - IS_ADMIN
    ---------------------------------------
    1 jsmith - 1-0
    brogerson 2-1 - 1
    3 jloren - 2-0

    Groups
    ID - GROUPNAME
    -----------------------------------------
    1 - ITUsers
    2 - AcctUsers

    I would like to create a procedure that accepts a users username and returns all users in their group and the user id, or if the user is marked IS_ADMIN, I want that procedure to return all of the users in all groups.

    How can I do this? Ideally, I would like the result of the funnel in a DataGridView in c#.

    Thank you in advance,

    Jeffrey Kevin Pry

    Published by: jeffrey.pry on May 10, 2010 10:42

    Published by: jeffrey.pry on May 10, 2010 10:43

    Hi, Jeffrey.

    You can create a view with two copies of the users table: one for the parameter (the original user, you intend to provide run-time) and one for all users in the two
    (a) in the same Department, or,
    (b) any Department, if the user is an administrator

    CREATE OR REPLACE VIEW  p_users
    AS
    SELECT       u.*
    ,       g.groupname
    ,       pu.username   AS p_username
    FROM       users          pu
    JOIN       groups     g     ON     pu.parent_group     = g.id
                          OR     pu.is_admin     = 1
    JOIN       users          u     ON     u.parent_group     = g.id
    ;
    

    You can use the view like this:

    SELECT       *
    FROM       p_users
    WHERE       p_username     = 'jsmith'
    ;
    

    The above query returns all users in Group 1, because jsith is in Group 1, but is not an administrator.
    Change 'jsmith' to 'brogerson' and you get everybody, because brogerson is an administrator.

    This assumes that each user is member of a group.

    If you create a namespace SYS_CONTEXT to contain the parameter (the target user name), then you could build the setting in the view:

    CREATE OR REPLACE VIEW  p_users
    AS
    SELECT       u.*
    ,       g.groupname
    ,       pu.username   AS p_username
    FROM       users          pu
    JOIN       groups     g     ON     pu.parent_group     = g.id
                          OR     pu.is_admin     = 1
    JOIN       users          u     ON     u.parent_group     = g.id
    WHERE       pu.username     = SYS_CONTEXT ('MY_APP_CONTEXT', 'USERNAME')
    ;
    

    and you wouldn't need a WHERE clause when you query p_users.

    Published by: Frank Kulash, 10 May 2010 15:28

  • some sites ask me to rember the name of the newspaper. If I do not accept some of them keep the valid name and others do not display them more.

    On some website, I have to login. If I Iam asked to remember the name of this connection. If I agree, some of these sites do not come until the next time with my username, but others.
    I can't find where I have to make sure that all Web sites, if any, do not forget my user name and/or password.

    Do you hear the names and passwords in the password manager or do you mean that you are connected is no longer on to (remember to) Web sites after the closing and restarting Firefox?

    There is a difference between remembering the name and the password in the password manager and a check box "remember me" on a web page.

    The latter usually involves the creation of a special "remember me" cookie that is stored on your computer and which is sent to the server.

    If that "remember me" cookie is deleted or is corrupted or is not send to the server, then the server remember that you and you must connect once again.

Maybe you are looking for